G5CE_boiler.pdf

HIGH-SPEED BACNET ROUTING AND INTEGRATION

The Automated Logic OptiFlex BACnet Integrator is an integral component of the WebCTRL® building automation system.

The OptiFlex Integrator supports routing between multiple BACnet networks. It also supports custom control programs to easily integrate with third party BACnet or Modbus equipment such as variable speed drives, boilers, and lighting.

Part Number Part# EQT2

KEY FEATURES AND BENEFITS

Supports routing between BACnet/IP, BACnet/Ethernet, and BACnet

MS/TP networks

Supports up to 1,500 third party BACnet points

Supports up to two BACnet/IP networks on the Gig-E port

Includes two additional BACnet ports to support either two simultaneous BACnet MS/TP networks (up to 127 controllers each) to simultaneously route and share data across a wide range of building subsystems

Can serve as a BACnet Broadcast Management Device (BBMD), routing any BACnet broadcast messages directly to other BBMD devices on the BACnet network

Supports BACnet Foreign Device Registration (FDR)

Hardware Features

Supports and executes control programs

Supports Gig-E, 1,000Mbps BACnet IP and DHCP IP addressing

Ethernet port provides local access for system start-up and troubleshooting

Supports network captures for advanced diagnostics

Provides network statistics numerically or as trend graphs inside the WebCTRL building automation system

Supports DIN rail and screw mounting

Capacitor-backed real-time clock keeps time in the event of power failure or network interruption for up to three days

Connects seamlessly to the WebCTRL building automation system

24 Vac Models: TBPL-24-H-A, TBPL-24-HM-A

OPTIFLEX™

BACNET

INTEGRATOR

BACnet Features

The WebCTRL building automation system gives you the ability to understand your building operations and analyze the results. Integrate environmental, energy, security and safety systems into one powerful management tool that helps you reduce energy consumption, increase occupant comfort, and achieve sustainable building operations.

Modbus Features

Can act as a master or slave on a Modbus serial network

Can act as a server or client on a Modbus TCP/IP network

1150 Roberts Boulevard, Kennesaw, Georgia 30144 770-429-3000 • Fax 770-429-3001 | automatedlogic.com | A Carrier Company

Part # G5CE OptiFlex BACnet Integrator

BACnet Conformance Conforms to the BACnet Building Controller (B-BC), BACnet Router (B-RTR) Standard Device and BACnet Broadcast Management Device (B-BBMD) as defined in BACnet 135. Tested to and listed to Protocol Revision 14 (135-2012).

BTL Listing | PICS | WPSCert Conformance Certificate

Control Program Execution

Maximum number of control programs: 999 depending upon available memory.

BACnet Objects Maximum number of BACnet objects: 12,000 for programming purposes.

Third-Party Integration Supports up to 1,500 third-party BACnet integration points, and 25 modbus integration points

Power 24 Vac ±10%, 50–60 Hz, 50 VA 26 Vdc ±10%, 15 W

Communication

Gig-E Port 10/100/1000 BaseT Ethernet port for BACnet/IP and/or BACnet/Ethernet and/or Modbus full duplex

Serial Port 1 For communication with either of the following:

• A BACnet MS/TP network at 9,600 to 115,200 bps

• A Modbus at 1,200 to 115200 bps

Serial Port 2 For communication with either of the following:

• A BACnet MS/TP network at 9,600 to 115,200 bps

• A Modbus at 1,200 to 115,200 bps

Local Access Port Ethernet port at 10 or 100 Mbps for system start-up and troubleshooting

Rnet Port Supports Up to 15 ZS wireless and/or ZS sensors, and one Equipment Touch or OptiPoint™ interface

Power 24 Vac ±10%, 50–60 Hz, 50 VA 26 Vdc ±10%, 15 W

Microprocessor 32-bit ARM Cortex-A8, 600 MHz, processor with multi-level cache memory, two Ethernet controllers, and USB 2.0 host port

Environmental Range 32 to 140º F (0 to 60º C); 10 - 90% relative humidity, non-condensing

Memory 16 GBs eMMC Flash memory (120 MB available for use) and 256 MB DDR3 DRAM. User data is archived to non-volatile Flash memory when parameters are changed, every 90 seconds, and when the firmware is deliberately shutdown or restarted.

Real Time Clock Real-time clock keeps track of time in the event of a power failure for up to 3 days

Compliance

United States: FCC compliant to Title CFR47, Part 15, Subpart B, Class A. UL Listed, File E143900; CCN PAZX, UL916, Energy Management Equipment; AS/NZS: RCM Mark 61000-6-3; Canada: UL Listed File E143900, CCN PAZX7, CAN/CSA C22.2 No.

205 Signal Equip., Industry Canada Compliant, ICES-003, Class A; CE Mark Compliant with 2014/30/EU, and RoHS Compliant:

2015/863/EU; UKCA Mark compliant with Electromagnetic Compatibility Regulations 2016 – Gov.UK and RoHS for Electrical and Electronic Equipment 2012.

Protection Device is protected by a replaceable, fast acting, 250Vac, 2A, 5mm x 20mm glass fuse.

The power and network ports comply with the EMC requirements EN50491-5-2

Plastic Rating Fire-retardant plastic ABS, UL94-5VA

Mounting DIN rail mounting or screw mounting

SPECIFICATIONS

©2022 Carrier. All Rights Reserved. All trademarks used herein are the property of their respective owners. 10-19-2022

Assembled in the United States

Figure 1: Physical Dimensions

in. cm

Width: 7.1 18.03

Height: 6.95 17.65

Depth: 2.09 5.31

Weight: 1.1 lbs 0.482 kg