A2. OCIE_Locker_SOW v2.docx

Statement of Work (SOW): OCIE Locker

1. Purpose The purpose of this Statement of Work (SOW) is to define the Government’s requirements for the procurement and delivery of Organizational Clothing and Individual Equipment (OCIE) lockers.

2. Scope The contractor shall provide all labor, materials, tools, equipment, and transportation necessary to supply and deliver fully assembled heavy-duty OCIE lockers in accordance with this SOW. Installation is required unless otherwise specified by the Government.

3. Requirements The contractor shall provide OCIE lockers that meet or exceed the following minimum specifications:

Construction: Heavy-duty 14-gauge welded steel construction Locking System: Cast aluminum hasp handle with three-point locking mechanism Doors: Diamond-pattern perforated (or similar) steel doors capable of providing adequate ventilation Overall Dimensions (aprox per one tier unit): 27 inches Wide x 36 inches Deep x 80 inches High. Please submit manufacturers standard equivalent.

Finish: Durable powder-coat finish or manufacturer's standard equivalent Assembly: Units must be shipped fully welded; knock-down or bolt-together assemblies are not acceptable Configuration: The Government will accept commercially available products meeting these minimum functional requirements. Minor dimensional variations consistent with standard commercial offerings are acceptable.

One full-width top shelf.

One full width enclosed bottom compartment (floor section). Open-bottom lockers are not acceptable.

Integrated coat rod/hanging bar.

Side hooks or equivalent hanging capability.

Lockable ventilated steel door(s).

Heavy-duty welded steel construction suitable for military OCIE storage.

Adjustable leveling feet (if standard).

Powder-coated finish, or similar.

4. Contractor-Provided Equipment and Support The contractor shall provide all equipment necessary for the setup and delivery of the lockers, including but not limited to:

Delivery vehicles and transport equipment Pallet jacks or lift-gates for offloading Any tools or resources required to safely move units to the designated receiving point

5. Quantity Exact quantity will be specified in the Purchase Request, Purchase Order, or Contract Award.

6. Delivery Delivery shall be FOB Destination. The contractor shall deliver all units to the designated address provided at time of award. All products must be delivered new, unused, and in original manufacturer packaging. Delivery timeline will be stated in the award document.

7. Inspection and Acceptance Government personnel will inspect delivered units upon receipt. Acceptance will occur once all lockers meet specifications, are undamaged, and comply with all contract requirements.

8. Warranty The contractor shall provide a standard commercial warranty covering materials, defects, and workmanship.

9. Government Points of Contact Points of contact for coordination, delivery scheduling, and inspection will be listed in the Purchase Order or Award Document.