Fuel_Tank_Specs_311-24-01.pdf

PENNSYLVANIA GAME COMMISSION

STATE GAME LANDS No. 311

ABOVEGROUND FUEL STORAGE TANK

State Game Lands #311 Benezette Township

Elk County

Table of Contents

Bid Notice

Terms and Conditions

Specifications

PA Prevailing Wages

Reciprocal Limitations Act

Worker Protection and Investment

Technical Specifications

Project Drawings

Photographs

(Provided Separately with Solicitation)

(Provided Separately with Solicitation)

4 Pages

7 Pages (Determination No. 24-07685)

4 Pages

1 Page

17 Pages

1 Drawing

2 Pages

SGL #311 Fuel Storage Tank Contract PGC-311-24-01

PROJECT SPECIFICATIONS

The Contractor shall comply with the Contract Terms and Conditions provided with the Bid Documents including but not limited to the following:

INSURANCE REQUIREMENTS – In accordance with the Contract Terms and Conditions, the Contractor is required to have in place during the term of the Contract and any renewals or extensions thereof, the following types of insurance, issued by companies acceptable to the Commonwealth and authorized to conduct such business under the laws of the Commonwealth of Pennsylvania:

A. Worker's Compensation Insurance for all of the Contractor's employees and those of any subcontractor, engaged in Work at the site of the project as required by law.

B. Builders Risk Insurance the Contractor shall, until all physical on-site work is complete, maintain insurance on all insurable work included in the Contract against loss or damage by fire and lightning and those perils covered by the extended coverage endorsement. Insurable work includes work both interior and exterior of any building being constructed. The property insurance must include a Builder’s Risk Policy or an installation floater that covers all risks. The risk of damage to the construction work is that of the Contractor and surety. No claims for such loss or damage will be recognized by the agency, nor will such loss or damage excuse the complete and satisfactory performance of the Contract by the Contractor. The Contractor and all subcontractors are required to produce certificates of insurance, naming the Commonwealth of Pennsylvania and Pennsylvania Game Commission as an additional insured.

C. Public Liability and Property Damage Insurance to protect the Commonwealth, the Contractor, and any and all subcontractors from claims for damages for personal injury (including bodily injury), sickness or disease, accidental death and damage to property including the loss of use resulting from any property damage, which may arise from the activities performed under the Contract or the failure to perform under the Contract, whether such performance or non-performance be by the Contractor, by any subcontractor, or by anyone directly or indirectly employed by either. The minimum amounts of coverage shall be $250,000 per person and $1,000,000 per occurrence for bodily injury, including death, and $250,000 per person and $1,000,000 per occurrence for property damage. Such policies shall be occurrence rather than claims-made policies and shall not contain any endorsements or any other form designated to limit and restrict any action by the Commonwealth, as an additional insured, against the insurance coverage in regard to Work performed for the Commonwealth.

SGL #311 Fuel Storage Tank

Prior to commencement of the Work under the Contract and at each insurance renewal date during the term of the Contract, the Contractor shall provide the Commonwealth with current certificates of insurance. These certificates or policies shall name the Commonwealth AND Pennsylvania Game Commission as additional insured and shall contain a provision that the coverage's afforded under the policies will not be cancelled or changed until at least thirty (30) days written notice has been given to the Commonwealth.

COMPLIANCE WITH LAW – The Contractor shall comply with all applicable federal and state laws and regulations and local ordinances in the performance of the Contract.

WORKMANSHIP - All Work shall be performed in a Workmanlike manner and all materials and labor shall be in strict and entire conformity with the Drawings and Specifications.

INSPECTION AND CHANGES - All Work is subject to inspection and acceptance by the Pennsylvania Game Commission. Any Work rejected as defective or unsuitable shall be removed and replaced with suitable Work and materials at the sole cost of the Contractor to the complete satisfaction of the Game Commission.

Changes shall be in accordance with the Contract Terms and Conditions.

TEMPORARY SERVICES AND JOB CONDITIONS - The Contractor shall be responsible for providing any and all temporary facilities necessary to execute and protect the Work. The Contractor shall accept all conditions as found upon examination of the site and shall coordinate, plan, and execute the Work accordingly. The Contractor shall cooperate in the arrangements of the Work as necessary to least affect the administration or operations of existing buildings, facilities, and infrastructure. The Contractor shall keep the Work site clean at all times.

PREVAILING WAGE – Prevailing minimum wages apply to this project. See Contract Terms and Conditions and attached Prevailing Wage Determination.

The Contractor and each Subcontractor shall file a statement each week and a final statement at the conclusion of the Work on the contract with the contracting agency, under oath, and in form satisfactory to the Secretary, certifying that workmen have been paid wages in strict conformity with the provisions of the contract as prescribed by this section or if wages remain unpaid to set forth the amount of wages due and owing to each workman respectively. The PA Labor and Industry “Weekly Payroll Certification for Public Works Projects” form shall be used. The initial and final Payroll Certifications shall be notarized.

PAYMENT TERMS - A schedule of values is provided with the bid. Payment will be made on a monthly basis upon satisfactory completion of items listed on the Schedule of Values and in accordance with the Contract Terms and Conditions.

All payments due to the Contractor shall be processed after all Work has been inspected and approved by an agent of the Pennsylvania Game Commission. Payment will not be made for Work that is not progressing satisfactorily or for unsuitable or defective Work.

SGL #311 Fuel Storage Tank

Payments may be withheld for failure to provide required documentation for the project including but not limited to required submittals / shop drawings and weekly submission of Certified Payrolls.

INVOICING – All Project invoices shall be submitted directly to:

Mr. Zachary Whitenight, Civil Engineer Pennsylvania Game Commission 2001 Elmerton Avenue Harrisburg PA 17110 Office: 717-787-4250 Ext:73628 Email: zwhitenigh@pa.gov

All invoices must be submitted in black and white with no color and shaded areas. Invoices must include the Purchase Order Number, Contractor’s SAP Vendor Number, and the Contractor’s name and address as listed on the Purchase Order. Payment items on invoices shall match the items on the Purchase Order. Failure to submit invoices that meet these requirements will result in a delay of payment.

Please Note: Vendors are reminded to NOT include employer identification numbers, Social Security Numbers, bank account information, or other personally identifiable information on their invoices. That information is uniquely tied to your SAP Vendor Number and, for security purposes, should not be explicitly stated on an invoice.

CONTRACT TERM - The Contract shall commence upon delivery of Purchase Order to Contractor and shall terminate on April 1, 2025. Contract time is of the essence of the Project.

All Work must be completed and accepted by this date.

EXCISE TAXES, PENNSYLVANIA SALES TAX - The Commonwealth is exempt from all Excise Taxes. See Contract Terms and Conditions.

OFFSET PROVISION - The Contractor agrees that the Commonwealth may set off the amount of any state liability or other debt of the Contractor or its subsidiaries that is owed to the Commonwealth and not being contested on appeal against any payments due the Contractor under this or any other contract with the Commonwealth.

PERFORMANCE SECURITY / CONTRACT BONDS – Within 10 days after award of the purchase order, the Bidder to whom the Contract is awarded, shall provide Contract Performance Security in a form acceptable to the Commonwealth for the amounts listed below and in accordance with the Contract Terms and Conditions.

A Performance Bond at one hundred percent (100%) of the contract amount, conditioned upon the faithful performance of the contract in accordance with the plans, specifications and conditions of the contract.

SGL #311 Fuel Storage Tank Contract PGC-311-24-01 mailto:zwhitenigh@pa.gov

Performance Bond shall be executed by a surety company authorized to do business in the Commonwealth and listed on the current U.S. Dept. of Treasury, Bureau of Fiscal Service, Department Circular 570 (https://fiscal.treasury.gov/surety-bonds/list-certified-companies.html). Bond shall include a current Power of Attorney dated the same as the date of the bond. Bond shall be made payable to the Commonwealth.

GUARANTY / WARRANTY – See Contract Terms and Conditions – all items are warranted for a period of one year following delivery by the Contractor and acceptance by the Commonwealth.

HOLD HARMLESS PROVISION - See Contract Terms and Conditions - The Contractor shall hold the Commonwealth harmless from and indemnify the Commonwealth against any and all third party claims, demands and actions based upon or arising out of any activities performed by the Contractor and its employees and agents under this Contract, provided the Commonwealth gives Contractor prompt notice of any such claim of which it learns.

ADDITIONAL PROVISIONS -

Contractor shall comply with the conditions listed below in accordance with the Contract Terms and Conditions:

1. Steel Products Procurement Act

2. Prohibition Against the Use of Certain Steel and Aluminum Products (Trade Practices Act)

3. Reciprocal Limitations Act - The form GSPUR89 (Reciprocal Limitations Act Requirements) is attached. The Contractor shall complete the applicable portions of pages 3 and 4 of the form and submit the completed pages within two days after the bid opening.

SGL #311 Fuel Storage Tank

Project Name: Aboveground Fuel Storage Tank

General Description: Installation of an 1,000 gallon fuel storage tank.

Project will include placement of concrete bollards and associated electrical wiring for the fuel pumps and leak detection system.

Project Locality Benezette Township

Awarding Agency: Pennsylvania Game Commission

Contract Award Date: 9/10/2024

Serial Number: 24-07685

Project Classification: Building/Heavy/Highway

Determination Date: 8/19/2024

Assigned Field Office: Altoona

Field Office Phone Number: (814)940-6224

Toll Free Phone Number:

Project County: Elk County

SGL #311 Fuel Storage Tank

Project: 24-07685 - Building Effective Date

Expiration Date

Hourly Rate Fringe Benefits

Total

Asbestos & Insulation Workers 8/1/2022 $39.55 $28.51 $68.06

Asbestos & Insulation Workers 8/1/2024 $41.55 $29.51 $71.06

Boilermakers 6/1/2016 $40.90 $27.61 $68.51

Bricklayer 12/1/2022 $31.62 $23.06 $54.68

Bricklayer 6/1/2024 $34.90 $23.43 $58.33

Carpenters - Piledriver/Welder 1/1/2023 $40.63 $21.22 $61.85

Carpenters - Piledriver/Welder 1/1/2024 $42.13 $21.97 $64.10

Carpenters - Piledriver/Welder 1/1/2025 $43.38 $22.72 $66.10

Carpenters - Piledriver/Welder 1/1/2026 $44.63 $23.47 $68.10

Carpenters, Drywall Hangers, Framers, Instrument Men, Lathers, Soft Floor Layers

6/1/2023 $33.01 $18.41 $51.42

Carpenters, Drywall Hangers, Framers, Instrument Men, Lathers, Soft Floor Layers

6/1/2024 $33.72 $19.20 $52.92

Cement Finishers 6/1/2016 $28.71 $17.85 $46.56

Cement Masons 6/1/2021 $31.77 $21.89 $53.66

Cement Masons 7/1/2024 $34.57 $25.09 $59.66

Drywall Finisher 6/1/2023 $31.89 $22.92 $54.81

Drywall Finisher 6/1/2024 $33.51 $23.80 $57.31

Electricians & Telecommunications Installation Technician

12/22/2023 $48.61 $31.80 $80.41

Electricians & Telecommunications Installation Technician

12/27/2024 $51.76 $31.80 $83.56

Electricians & Telecommunications Installation Technician

12/26/2025 $55.06 $31.80 $86.86

Elevator Constructor 1/1/2023 $56.14 $42.83 $98.97

Elevator Constructor 1/1/2024 $58.55 $43.87 $102.42

Glazier 9/1/2022 $24.90 $24.45 $49.35

Glazier 9/1/2023 $25.40 $25.70 $51.10

Iron Workers 6/1/2022 $31.79 $32.31 $64.10

Iron Workers 6/1/2023 $32.29 $32.85 $65.14

Iron Workers 6/1/2024 $32.99 $34.30 $67.29

Laborers (Class 01 - See notes) 1/1/2023 $22.98 $18.53 $41.51

Laborers (Class 01 - See notes) 1/1/2024 $24.48 $19.03 $43.51

Laborers (Class 01 - See notes) 1/1/2025 $25.98 $19.53 $45.51

Laborers (Class 02 - See notes) 1/1/2023 $23.23 $18.53 $41.76

Laborers (Class 02 - See notes) 1/1/2024 $24.73 $19.03 $43.76

Laborers (Class 02 - See notes) 1/1/2025 $26.23 $19.53 $45.76

Laborers (Class 03 - See notes) 1/1/2023 $23.78 $18.53 $42.31

Laborers (Class 03 - See notes) 1/1/2024 $25.28 $19.03 $44.31

Laborers (Class 03 - See notes) 1/1/2025 $26.78 $19.53 $46.31

Landscape Laborer (Skilled) 1/1/2023 $23.79 $18.28 $42.07

Landscape Laborer (Skilled) 1/1/2024 $24.79 $18.53 $43.32

Landscape Laborer (Skilled) 1/1/2025 $25.79 $18.78 $44.57

Landscape Laborer (Skilled) 1/1/2026 $26.79 $19.03 $45.82

Landscape Laborer (Tractor Operator) 1/1/2023 $24.09 $18.28 $42.37

Landscape Laborer (Tractor Operator) 1/1/2024 $25.09 $18.53 $43.62

SGL #311 Fuel Storage Tank

Expiration Date

Hourly Rate Fringe Benefits

Total

Landscape Laborer (Tractor Operator) 1/1/2025 $26.09 $18.78 $44.87

Landscape Laborer (Tractor Operator) 1/1/2026 $27.09 $19.03 $46.12

Landscape Laborer 1/1/2018 $17.60 $16.48 $34.08

Landscape Laborer 1/1/2023 $23.37 $18.28 $41.65

Landscape Laborer 1/1/2024 $24.37 $18.53 $42.90

Landscape Laborer 1/1/2025 $25.37 $18.78 $44.15

Landscape Laborer 1/1/2026 $26.37 $19.03 $45.40

Millwright 6/1/2020 $41.68 $20.32 $62.00

Operators (Class 01 - see notes) 7/1/2022 $34.17 $20.62 $54.79

Operators (Class 01 - see notes) 7/1/2023 $35.87 $20.92 $56.79

Operators (Class 01 - see notes) 7/1/2024 $36.87 $21.42 $58.29

Operators (Class 02 -see notes) 7/1/2022 $29.55 $20.62 $50.17

Operators (Class 02 -see notes) 7/1/2023 $31.25 $20.92 $52.17

Operators (Class 02 -see notes) 7/1/2024 $32.87 $21.42 $54.29

Operators (Class 03 - See notes) 7/1/2022 $27.00 $20.62 $47.62

Operators (Class 03 - See notes) 7/1/2023 $28.70 $20.92 $49.62

Operators (Class 03 - See notes) 7/1/2024 $29.70 $21.42 $51.12

Operators (Class 04 - Chief of Party (Surveying and Layout))

7/1/2022 $26.60 $20.62 $47.22

Operators (Class 04 - Chief of Party (Surveying and Layout))

7/1/2023 $28.30 $20.92 $49.22

Operators (Class 04 - Chief of Party (Surveying and Layout))

7/1/2024 $29.30 $21.42 $50.72

Operators (Class 04 - Instrument Person (Surveying & Layout))

7/1/2022 $25.60 $20.62 $46.22

Operators (Class 04 - Instrument Person (Surveying & Layout))

7/1/2023 $27.30 $20.92 $48.22

Operators (Class 04 - Instrument Person (Surveying & Layout))

7/1/2024 $28.30 $21.42 $49.72

Operators (Class 04 - Rodman/Chainman (Surveying and Layout))

7/1/2022 $25.15 $20.62 $45.77

Operators (Class 04 - Rodman/Chainman (Surveying and Layout))

7/1/2023 $26.85 $20.92 $47.77

Operators (Class 04 - Rodman/Chainman (Surveying and Layout))

7/1/2024 $27.85 $21.42 $49.27

Painters Class 6 (see notes) 6/1/2022 $29.50 $22.82 $52.32

Painters Class 6 (see notes) 6/1/2023 $30.56 $24.01 $54.57

Painters Class 6 (see notes) 6/1/2024 $32.14 $24.93 $57.07

Painters Class 6 (see notes) 6/1/2025 $34.16 $25.81 $59.97

Pile Driver Divers (Building, Heavy, Highway) 1/1/2023 $58.70 $21.22 $79.92

Pile Driver Divers (Building, Heavy, Highway) 1/1/2024 $60.95 $21.97 $82.92

Pile Driver Divers (Building, Heavy, Highway) 1/1/2025 $62.82 $22.72 $85.54

Pile Driver Divers (Building, Heavy, Highway) 1/1/2026 $64.70 $23.47 $88.17

Piledrivers 1/1/2023 $39.13 $21.22 $60.35

Piledrivers 1/1/2024 $40.63 $21.97 $62.60

Piledrivers 1/1/2025 $41.88 $22.72 $64.60

Piledrivers 1/1/2026 $43.13 $23.47 $66.60

SGL #311 Fuel Storage Tank

Expiration Date

Hourly Rate Fringe Benefits

Total

Plasterers 6/1/2022 $31.44 $19.74 $51.18

Plasterers 6/1/2023 $32.14 $20.54 $52.68

Plasterers 6/1/2024 $33.14 $21.04 $54.18

Plumbers and Steamfitters 6/1/2022 $38.17 $24.90 $63.07

Plumbers and Steamfitters 6/1/2023 $38.57 $26.26 $64.83

Plumbers and Steamfitters 6/1/2024 $40.02 $27.01 $67.03

Plumbers and Steamfitters 6/1/2025 $41.47 $27.71 $69.18

Plumbers and Steamfitters 6/1/2026 $42.92 $28.45 $71.37

Pointers, Caulkers, Cleaners 12/1/2022 $35.47 $20.88 $56.35

Pointers, Caulkers, Cleaners 6/1/2024 $38.59 $21.36 $59.95

Roofers 6/1/2022 $36.04 $19.13 $55.17

Roofers 6/1/2023 $37.00 $19.92 $56.92

Roofers 6/2/2024 $38.00 $20.67 $58.67

Sheet Metal Workers 7/1/2022 $39.50 $31.43 $70.93

Sheet Metal Workers 8/1/2023 $41.00 $32.94 $73.94

Sheet Metal Workers 7/1/2024 $43.00 $33.96 $76.96

Sign Makers and Hangars 7/15/2022 $30.54 $24.35 $54.89

Sign Makers and Hangars 7/15/2023 $31.76 $24.63 $56.39

Sign Makers and Hangars 7/15/2024 $32.32 $25.82 $58.14

Sprinklerfitters 4/1/2023 $44.33 $28.04 $72.37

Sprinklerfitters 4/1/2024 $46.45 $28.62 $75.07

Stone Masons 12/1/2022 $38.56 $23.61 $62.17

Terrazzo Finisher 12/1/2022 $36.13 $18.03 $54.16

Terrazzo Finisher 6/1/2023 $39.79 $18.47 $58.26

Terrazzo Mechanics 12/1/2022 $35.49 $20.32 $55.81

Terrazzo Mechanics 6/1/2024 $39.14 $20.77 $59.91

Tile Finisher 12/1/2022 $28.76 $17.34 $46.10

Tile Finisher 6/1/2024 $31.56 $17.74 $49.30

Tile Setter 12/1/2022 $35.64 $21.81 $57.45

Tile Setter 6/1/2024 $38.46 $22.19 $60.65

Truckdriver class 1(see notes) 1/1/2023 $33.04 $22.13 $55.17

Truckdriver class 1(see notes) 1/1/2024 $34.79 $22.63 $57.42

Truckdriver class 1(see notes) 1/1/2025 $36.29 $23.13 $59.42

Truckdriver class 1(see notes) 1/1/2026 $37.79 $23.63 $61.42

Truckdriver class 2 (see notes) 1/1/2023 $33.50 $22.43 $55.93

Truckdriver class 2 (see notes) 1/1/2024 $35.25 $22.93 $58.18

Truckdriver class 2 (see notes) 1/1/2025 $36.75 $23.43 $60.18

Truckdriver class 2 (see notes) 1/1/2026 $38.25 $23.93 $62.18

Window Film / Tint Installer 10/1/2019 $25.00 $2.63 $27.63

SGL #311 Fuel Storage Tank

Project: 24-07685 - Heavy/Highway Effective

Expiration Date

Hourly Rate Fringe Benefits

Total

Carpenter 1/1/2023 $38.35 $20.59 $58.94

Carpenter 1/1/2024 $39.85 $21.34 $61.19

Carpenter 1/1/2025 $41.10 $22.09 $63.19

Carpenter 1/1/2026 $42.35 $22.84 $65.19

Carpenter Welder 1/1/2023 $39.85 $20.59 $60.44

Carpenter Welder 1/1/2024 $41.35 $21.34 $62.69

Carpenter Welder 1/1/2025 $42.60 $22.09 $64.69

Carpenter Welder 1/1/2026 $43.85 $22.84 $66.69

Carpenters - Piledriver/Welder 1/1/2023 $40.63 $21.22 $61.85

Carpenters - Piledriver/Welder 1/1/2024 $42.13 $21.97 $64.10

Carpenters - Piledriver/Welder 1/1/2025 $43.38 $22.72 $66.10

Carpenters - Piledriver/Welder 1/1/2026 $44.63 $23.47 $68.10

Cement Finishers 1/1/2023 $34.14 $25.05 $59.19

Cement Finishers 1/1/2024 $35.14 $26.30 $61.44

Cement Finishers 1/1/2025 $35.94 $27.50 $63.44

Cement Masons 1/1/2020 $32.84 $21.10 $53.94

Electric Lineman 8/29/2022 $62.66 $28.08 $90.74

Electric Lineman 9/4/2023 $64.68 $29.01 $93.69

Electric Lineman 1/1/2024 $64.46 $29.23 $93.69

Iron Workers (Bridge, Structural Steel, Ornamental, Precast, Reinforcing)

6/1/2022 $31.79 $32.31 $64.10

Iron Workers (Bridge, Structural Steel, Ornamental, Precast, Reinforcing)

6/1/2023 $32.29 $32.85 $65.14

Iron Workers (Bridge, Structural Steel, Ornamental, Precast, Reinforcing)

6/1/2024 $32.99 $34.30 $67.29

Laborers (Class 01 - See notes) 1/1/2023 $29.95 $25.50 $55.45

Laborers (Class 01 - See notes) 1/1/2024 $32.20 $25.50 $57.70

Laborers (Class 01 - See notes) 1/1/2025 $33.70 $26.00 $59.70

Laborers (Class 01 - See notes) 1/1/2026 $34.70 $27.00 $61.70

Laborers (Class 02 - See notes) 1/1/2023 $30.11 $25.50 $55.61

Laborers (Class 02 - See notes) 1/1/2024 $32.36 $25.50 $57.86

Laborers (Class 02 - See notes) 1/1/2025 $33.86 $26.00 $59.86

Laborers (Class 02 - See notes) 1/1/2026 $34.86 $27.00 $61.86

Laborers (Class 03 - See notes) 1/1/2023 $30.50 $25.50 $56.00

Laborers (Class 03 - See notes) 1/1/2024 $32.75 $25.50 $58.25

Laborers (Class 03 - See notes) 1/1/2025 $34.25 $26.00 $60.25

Laborers (Class 03 - See notes) 1/1/2026 $35.25 $27.00 $62.25

Laborers (Class 04 - See notes) 1/1/2023 $30.95 $25.50 $56.45

Laborers (Class 04 - See notes) 1/1/2024 $33.20 $25.50 $58.70

Laborers (Class 04 - See notes) 1/1/2025 $34.70 $26.00 $60.70

Laborers (Class 04 - See notes) 1/1/2026 $35.70 $27.00 $62.70

Laborers (Class 05 - See notes) 1/1/2023 $31.36 $25.50 $56.86

Laborers (Class 05 - See notes) 1/1/2024 $33.61 $25.50 $59.11

Laborers (Class 05 - See notes) 1/1/2025 $35.11 $26.00 $61.11

Laborers (Class 05 - See notes) 1/1/2026 $36.11 $27.00 $63.11

SGL #311 Fuel Storage Tank

Expiration Date

Hourly Rate Fringe Benefits

Total

Laborers (Class 06 - See notes) 1/1/2023 $28.20 $25.50 $53.70

Laborers (Class 06 - See notes) 1/1/2024 $30.45 $25.50 $55.95

Laborers (Class 06 - See notes) 1/1/2025 $31.95 $26.00 $57.95

Laborers (Class 06 - See notes) 1/1/2026 $32.95 $27.00 $59.95

Laborers (Class 07 - See notes) 1/1/2023 $30.95 $25.50 $56.45

Laborers (Class 07 - See notes) 1/1/2024 $33.20 $25.50 $58.70

Laborers (Class 07 - See notes) 1/1/2025 $34.70 $26.00 $60.70

Laborers (Class 07 - See notes) 1/1/2026 $35.70 $27.00 $62.70

Laborers (Class 08 - See notes) 1/1/2023 $32.45 $25.50 $57.95

Laborers (Class 08 - See notes) 1/1/2024 $34.70 $25.50 $60.20

Laborers (Class 08 - See notes) 1/1/2025 $36.20 $26.00 $62.20

Laborers (Class 08 - See notes) 1/1/2026 $37.20 $27.00 $64.20

Millwright 6/1/2020 $41.68 $20.32 $62.00

Millwright 6/1/2023 $45.50 $23.72 $69.22

Millwright 6/1/2024 $47.59 $23.72 $71.31

Millwright 6/1/2025 $49.72 $23.72 $73.44

Operators (Class 01 - see notes) 1/1/2023 $36.79 $23.58 $60.37

Operators (Class 01 - see notes) 1/1/2024 $38.59 $24.03 $62.62

Operators (Class 01 - see notes) 1/1/2025 $40.39 $24.23 $64.62

Operators (Class 02 -see notes) 1/1/2023 $36.53 $23.58 $60.11

Operators (Class 02 -see notes) 1/1/2024 $38.33 $24.03 $62.36

Operators (Class 02 -see notes) 1/1/2025 $40.13 $24.23 $64.36

Operators (Class 03 - See notes) 1/1/2023 $32.88 $23.58 $56.46

Operators (Class 03 - See notes) 1/1/2024 $34.68 $24.03 $58.71

Operators (Class 03 - See notes) 1/1/2025 $36.48 $24.23 $60.71

Operators (Class 04 - See notes) 1/1/2023 $32.42 $23.58 $56.00

Operators (Class 04 - See notes) 1/1/2024 $34.22 $24.03 $58.25

Operators (Class 04 - See notes) 1/1/2025 $36.02 $24.23 $60.25

Operators (Class 05 - See notes) 1/1/2023 $32.17 $23.58 $55.75

Operators (Class 05 - See notes) 1/1/2024 $33.97 $24.03 $58.00

Operators (Class 05 - See notes) 1/1/2025 $35.77 $24.23 $60.00

Operators Class 1-A 1/1/2023 $39.79 $23.58 $63.37

Operators Class 1-A 1/1/2024 $41.59 $24.03 $65.62

Operators Class 1-A 1/1/2025 $43.39 $24.23 $67.62

Operators Class 1-B 1/1/2023 $38.79 $23.58 $62.37

Operators Class 1-B 1/1/2024 $40.59 $24.03 $64.62

Operators Class 1-B 1/1/2025 $42.39 $24.23 $66.62

Painters Class 1 (see notes) 6/1/2022 $34.45 $22.82 $57.27

Painters Class 2 (see notes) 6/1/2019 $35.25 $20.06 $55.31

Painters Class 2 (see notes) 6/1/2023 $36.01 $24.01 $60.02

Painters Class 2 (see notes) 6/1/2024 $38.09 $24.93 $63.02

Painters Class 2 (see notes) 6/1/2025 $40.36 $25.81 $66.17

Painters Class 3 (see notes) 6/1/2022 $36.77 $22.82 $59.59

Painters Class 3 (see notes) 6/1/2023 $38.33 $24.01 $62.34

SGL #311 Fuel Storage Tank

Expiration Date

Hourly Rate Fringe Benefits

Total

Painters Class 3 (see notes) 6/1/2024 $40.66 $24.93 $65.59

Painters Class 3 (see notes) 6/1/2025 $43.69 $25.81 $69.50

Painters Class 4 (see notes) 6/1/2019 $28.20 $20.06 $48.26

Painters Class 5 (see notes) 6/1/2019 $22.91 $20.06 $42.97

Pile Driver Divers (Building, Heavy, Highway) 1/1/2023 $58.70 $21.22 $79.92

Pile Driver Divers (Building, Heavy, Highway) 1/1/2024 $60.95 $21.97 $82.92

Pile Driver Divers (Building, Heavy, Highway) 1/1/2025 $62.82 $22.72 $85.54

Pile Driver Divers (Building, Heavy, Highway) 1/1/2026 $64.70 $23.47 $88.17

Piledrivers 1/1/2023 $39.13 $21.22 $60.35

Piledrivers 1/1/2024 $40.63 $21.97 $62.60

Piledrivers 1/1/2025 $41.88 $22.72 $64.60

Piledrivers 1/1/2026 $43.13 $23.47 $66.60

Steamfitters (Heavy and Highway - Gas Distribution) 5/1/2022 $48.43 $40.28 $88.71

Truckdriver class 1(see notes) 1/1/2023 $33.04 $22.13 $55.17

Truckdriver class 1(see notes) 1/1/2024 $34.79 $22.63 $57.42

Truckdriver class 1(see notes) 1/1/2025 $36.29 $23.13 $59.42

Truckdriver class 1(see notes) 1/1/2026 $37.79 $23.63 $61.42

Truckdriver class 2 (see notes) 1/1/2023 $33.50 $22.43 $55.93

Truckdriver class 2 (see notes) 1/1/2024 $35.25 $22.93 $58.18

Truckdriver class 2 (see notes) 1/1/2025 $36.75 $23.43 $60.18

Truckdriver class 2 (see notes) 1/1/2026 $38.25 $23.93 $62.18

SGL #311 Fuel Storage Tank

RECIPROCAL LIMITATIONS ACT

REQUIREMENTS

Please Complete Applicable Portion of Pages 3 & 4 and Return with Bid.

NOTE: These Requirements Do Not Apply To Bids Under $10,000.00

I. REQUIREMENTS

A. The Reciprocal Limitations Act requires the Commonwealth to give preference to those bidders offering supplies produced, manufactured, mined or grown in Pennsylvania as against those bidders offering supplies produced, manufactured, mined or grown in any state that gives or requires a preference to supplies produced, manufactured, mined or grown in that state. The amount of the preference shall be equal to the amount of the preference applied by the other state for that particular supply.

The following is a list of states which have been found by the Department of General Services to have applied a preference for in-state supplies and the amount of the preference:

STATE PREFERENCE

1. Alaska 7% (applies only to timber, lumber, and manufactured lumber products originating in the state)

2. Arizona 5% (construction materials produced or manufactured in the state only)

3. Hawaii 10%

4. Illinois 10% for coal only

5. Iowa 5% for coal only

6. Louisiana 4% meat and meat products

4% catfish 10% milk & dairy products 10% steel rolled in Louisiana 7% all other products

7. Montana 5% for residents * 3% for non-residents*

*offering in-state goods, supplies, equipment and materials

8. New Mexico 5%

9. New York 3% for purchase of food only

10. Oklahoma 5%

11. Virginia 4% for coal only

12. Washington 5% (fuels mined or produced in the state only)

13. Wyoming 5%

B. The Reciprocal Limitations Act requires the Commonwealth to give preference to those bidders offering printing performed in Pennsylvania as against those bidders offering printing performed in any state that gives or requires a preference to printing performed in that state. The amount of the preference shall be equal to the amount of the preference applied by the other state for that particular category of printing.

The following is a list of states which have been found by the Department of General Services to have applied a preference for in-state printing and the amount of the preference:

STATE PREFERENCE

1. Hawaii 15%

2. Idaho 10%

3. Louisiana 3%

4. Montana 8%

5. New Mexico 5%

6. Wyoming 10%

C. The Reciprocal Limitations Act, also requires the Commonwealth to give resident bidders a preference against a nonresident bidder from any state that gives or requires a preference to bidders from that state or exclude bidders from states that exclude nonresident bidders. The amount of the preference shall be equal to the amount of the preference applied by the state of the nonresident bidder. The following is a list of the states which have been found by the Department of General Services to have applied a preference for in-state bidders and the amount of the preference:

SGL #311 Fuel Storage Tank

STATE PREFERENCE

1. Alaska 5% (supplies only)

2. Arizona 5% (construction materials from Arizona resident dealers only)

3. California 5% (for supply contracts only in excess of $100,000.00)

4. Connecticut 10% (for supplies only)

5. Montana 3%

6. New Mexico 5% (for supplies only)

7. South Carolina 2% (under $2,500,000.00)

1% (over $2,500,000.00) This preference does not apply to construction contracts nor where the price of a single unit exceeds $10,000.

8. West Virginia 2.5% (for the construction, repair or improvement of any buildings

9. Wyoming 5%

STATE PROHIBITION

1. New Jersey For supply procurements or construction projects restricted to Department of General

Services Certified Small Businesses, New Jersey bidders shall be excluded from award even if they themselves are Department of General Services Certified Small Businesses.

D. The Reciprocal Limitations Act also requires the Commonwealth not to specify, use or purchase supplies which are produced, manufactured, mined or grown in any state that prohibits the specification for, use, or purchase of such items in or on its public buildings or other works, when such items are not produced, manufactured, mined or grown in such state. The following is a list of the states which have been found by the Department of General Services to have prohibited the use of out-of-state supplies:

STATE PROHIBITION

1. Alabama Only for printing and binding involving ”messages of the Governor to the Legislature“, all bills, documents and reports ordered by and for the use of the Legislature or either house thereof while in session; all blanks, circulars, notices and forms used in the office of or ordered by the Governor, or by any state official, board, commission, bureau or department, or by the clerks of the supreme court . . ./and other appellate courts/; and all blanks and forms ordered by and for the use of the Senate and Clerk or the House of Representatives, and binding the original records and opinions of the Supreme Court . . .

/and other appellate courts/

2. Georgia Forest products only

3. Indiana Coal

4. Michigan Printing

5. New Mexico Construction

6. Ohio Only for House and Senate bills, general and local laws, and joint resolutions; the journals and bulletins of the Senate and house of Representatives and reports, communications, and other documents which form part of the journals; reports, communications, and other documents ordered by the General Assembly, or either House, or by the executive department or elective state officers; blanks, circulars, and other work for the use of the executive departments, and elective state officers; and opinions of the Attorney General.

7. Rhode Island Only for food for state institutions.

*If the bid discloses that the bidder is offering to supply one of the above-listed products that is manufactured, mined, or grown in the listed state, it shall be rejected. Contractors are prohibited from supplying these items from these states.

II. CALCULATION OF PREFERENCE

In calculating the preference, the amount of a bid submitted by a Pennsylvania bidder shall be reduced by the percentage preference which would be given to a nonresident bidder by its state of residency (as found by the Department of General Services in Paragraph C above). Similarly, the amount of a bid offering Pennsylvania goods, supplies, equipment or materials shall be reduced by the percentage preference which would be given to another bidder by the state where the goods, supplies, equipment or materials are produced, manufactured, mined or grown (as found by the Department of General Services in Paragraphs A and B above).

SGL #311 Fuel Storage Tank

THIS FORM MUST BE COMPLETED AND RETURNED WITH THE BID

III. STATE OF MANUFACTURE

All bidders must complete the following chart by listing the name of the manufacturer and the state (or foreign country) of manufacture for each item. If the item is domestically produced, the bidder must indicate the state in the United States where the item will be manufactured. This chart must be completed and submitted with the bid or no later than two (2) business days after notification from the Issuing Office to furnish the information. Failure to complete this chart and provide the required information prior to the expiration of the second business day after notification shall result in the rejection of the bid.

ITEM NUMBER NAME OF MANUFACTURER

STATE

(OR FOREIGNCOUNTRY)

OF MANUFACTURE

IV. BIDDER’S RESIDENCY

A. In determining whether the bidder is a nonresident bidder from a state that gives or requires a preference to bidders from that state, the address given on the first page of this invitation to bid shall be used by the Commonwealth. If that address is incorrect, or if no address is given, the correct address should be provided in the space below:

Correct Address:

SGL #311 Fuel Storage Tank

B. In order to claim the preference provided under Section I.B., Pennsylvania resident bidders must complete the following or have such information on file with the Issuing Office:

1. Address of bidder’s bona fide establishment in Pennsylvania at which it was transacting business on the date when bids for this contract/requisition were first solicited:

2. a. If the bidder is a corporation:

(1) The corporation is or is not incorporated under the laws of the Commonwealth of Pennsylvania.

(a) If the bidder is incorporated under the laws of the Commonwealth of Pennsylvania, provide date of incorporation:

(b) If the bidder is not incorporated under the laws of the Commonwealth of Pennsylvania, it must have a certificate of authority to do business in the Commonwealth of Pennsylvania from the Pennsylvania Department of State as required by the Pennsylvania Business Corporation Law (15 P.S. §2001). Provide date of issuance of certificate of authority:

(2) The corporation is or is not conducting business in Pennsylvania under an assumed or fictitious name. If the bidder is conducting business under an assumed or fictitious name, it must register the fictitious name with the Secretary of the Commonwealth and the office of the prothonotary of the county wherein the registered office of such corporation is located as required by the Fictitious Corporate Name Act, as amended 15 P.S. §51 et seq. Corporate bidders conducting business under an assumed or fictitious name must provide date of registry of the assumed or fictitious name:

b. If the bidder is a partnership:

(1) The partnership is or is not conducting business in Pennsylvania under an assumed or fictitious name. If the bidder is conducting business under an assumed or fictitious name, it must file with the Secretary of the Commonwealth and the office of the prothonotary the county wherein the principal place of business is located as required by the Fictitious Name Act of May 24, 1945, P.L. 967, as amended 54 P.S. §28.1. Partnerships conducting business under an assumed or fictitious name must provide the date of filing of the assumed or fictitious name with the Secretary of the Commonwealth:

(2) The partnership is or is not a limited partnership formed under the laws of any jurisdiction other than the Commonwealth of Pennsylvania. If the bidder is an Out-of-state limited partnership, it must register with the Pennsylvania Department of State as required by the Act of July 10, 1981, P.L. 237, as amended, 59 Pa. C.S.A. §503. Out-of-state limited partnerships must provide the date of registry with the Pennsylvania Department of State:

c. If the bidder is an individual:

He or she is or is not conducting business under an assumed or fictitious name. If the bidder is conducting business under an assumed or fictitious name, he or she must file with the Secretary of the Commonwealth and the office of the prothonotary in the county wherein the principal place of business is located as required by the Fictitious Name Act of May 24, 1945, P.L. 967, as amended, 54 P.S. §28.1. Individuals conducting business under an assumed or fictitious name must provide the date of filing of the assumed or fictitious name with the Secretary of the Commonwealth:

SGL #311 Fuel Storage Tank

WORKER PROTECTION AND INVESTMENT CERTIFICATION FORM

A. Pursuant to Executive Order 2021-06, Worker Protection and Investment (October 21, 2021), the Commonwealth is responsible for ensuring that every worker in Pennsylvania has a safe and healthy work environment and the protections afforded them through labor laws. To that end, contractors and grantees of the Commonwealth must certify that they are in compliance with Pennsylvania’s Unemployment Compensation Law, Workers’ Compensation Law, and all applicable Pennsylvania state labor and workforce safety laws including, but not limited to:

1. Construction Workplace Misclassification Act

2. Employment of Minors Child Labor Act

3. Minimum Wage Act

4. Prevailing Wage Act

5. Equal Pay Law

6. Employer to Pay Employment Medical Examination Fee Act

7. Seasonal Farm Labor Act

8. Wage Payment and Collection Law

9. Industrial Homework Law

10. Construction Industry Employee Verification Act

11. Act 102: Prohibition on Excessive Overtime in Healthcare

12. Apprenticeship and Training Act

13. Inspection of Employment Records Law

B. Pennsylvania law establishes penalties for providing false certifications, including contract termination; and three-year ineligibility to bid on contracts under 62 Pa. C.S. § 531 (Debarment or suspension).

CERTIFICATION

I, the official named below, certify I am duly authorized to execute this certification on behalf of the contractor/grantee identified below, and certify that the contractor/grantee identified below is compliant with applicable Pennsylvania state labor and workplace safety laws, including, but not limited to, those listed in Paragraph A, above. I understand that I must report any change in the contractor/grantee’s compliance status to the Purchasing Agency immediately. I further confirm and understand that this Certification is subject to the provisions and penalties of 18 Pa. C.S. § 4904 (Unsworn falsification to authorities).

Signature Date

Name (Printed)

Title of Certifying Official (Printed)

Contractor/Grantee Name (Printed)

BOP-2201

Published: 02/07/2022

SGL #311 Fuel Storage Tank

TECHNICAL SPECIFICATIONS

The following stipulations, specifications and description of work are defined and described as Technical Specifications and it is understood and agreed that everything herein contained is hereby made part of the contract. Wherever any feature of the work is not fully set forth in these Technical Specifications, it must be understood that the same shall be governed by the rules of the best prevailing practice for that class of work, as determined by the Game Commission’s Representative.

These Technical Specifications and any drawings, maps and/or plans forming a part thereof, will cover the furnishing of all labor, technical assistance, equipment, tools and materials necessary to perform the design and construction work, as required under this contract.

Section 1 Summary of Work Section 2 Submittals Section 3 Above Ground Storage Tank Section 4 Fuel Dispense System Section 5 Bollards Section 6 Concrete Section 7 Electric Power Supply

DRAWINGS and Photographs

The following drawings and photographs are included:

A-1 – Plans & Details Location Photographs

SGL #311 Fuel Storage Tank

TECHNICAL SPECIFICATION SECTION NO. 1 - SUMMARY OF WORK

1.1 – SCOPE OF PROJECT

The intent of this project is to install a new above ground fuel storage tank and related components to serve the Pennsylvania Game Commission (PGC) maintenance operations. The new fuel storage tank is in Benezette Township, Elk County on State Game Lands #311. The project consists of delivering and installing a new 1,000 gallon above ground storage tank with separate 500 gallon compartments, installation of two fuel dispensing systems, emergency shutoff system, protective steel encased concrete bollards, and associated power connections.

1.2 – WORK AREA

The work area for this project is on State Game Lands #311. The building site is in Benezette Township, Elk County, mailing address 3508 Winslow Hill Road, Benezette, PA 15821. The property is owned by the PGC.

1.3 – WORK HOURS

The work hours at the project site are during regular PGC business hours, which are Monday through Friday, 7:00AM to 3:30PM. Any work during different hours must have prior written approval by the PGC. Requests for different working hours must be submitted in writing two days in advance.

1.4 – ACCESS TO WORK AREA

Access to the work area is from a paved public road, Winslow Hill Road and accessed on gravel driveway. The Contractor may use any available space to store equipment or materials but must keep the access drive open to PGC vehicles.

1.5 – SITE LAYOUT AND PREPARATION

An existing 13'-0" x 16'-0" x 8" thick, class AA concrete pad with #4 rebar placed at 12" O.C. E.W. was placed for future fuel tank installation. A 1 1/4" diameter schedule 40 PVC conduit approximately 50' in length has previously been installed and stubbed out to provide electrical connection access from building to fuel storage tank.

TS-1-1

SGL #311 Fuel Storage Tank

1.6 – PERMITS, LAWS AND REGULATIONS

The Contractor shall procure and pay for all permits, licenses, inspections, conveniences, or other approvals necessary for the execution of the contract. The contractor shall notify the PA DEP and coordinate with the PGC so that the required inspections take place, and the project is not unduly delayed. Local building code officials have no jurisdiction over this project.

The Contractor shall comply with all laws, ordinances, rules, orders and regulations relating to the performance of the work, the protection of adjacent property, the maintaining of surface passageways, safety measures, and/or other protective facilities.

All applicable Federal and State laws and regulations and regulations of all utilities, having jurisdiction over construction of the project shall apply to the contract throughout, and they shall be deemed to be included in the contract as a part, thereof, the same as though herein written out in full.

All regulations of the Occupational Safety and Health Act are in effect on this contract. It will be the Contractor’s responsibility to make himself aware of all appropriate County, State and Federal regulations that apply to this contract.

Any violations incurred from improper execution of the above provisions shall be paid for by the Contractor. Loss of time on the project from such violations will not be tolerated.

TS-1-2

SGL #311 Fuel Storage Tank

TECHNICAL SPECIFICATION SECTION NO. 2 - SUBMITTALS

2.1 – SECTION INCLUDES/CONTENT

A. Included in this section of the specifications is a list of approvals required for all materials incorporated into the project. The Pennsylvania Game Commission reserves the right to require additional approvals if necessary. No material, equipment or supplies listed herein shall be incorporated into the work until the Contractor has obtained prior approval from the Commission.

B. Submittals required by each prime contract are indicated in the description of items to be submitted, Paragraph 2.8.

2.2 - SUBMITTAL PROCEDURES

A. Comply with the following or resubmission will be required:

1. Indicate contract number and specification section on each item submitted.

2. Signify approval by stamp, initialing and dating each item prior to submission to the

Designer.

B. Items requiring testing shall be forwarded directly to the approved laboratory. The

Contractor shall pay all costs associated with testing.

C. Expedite critical materials, equipment and shop drawings, and other required submissions.

D. Incomplete submissions will be returned for resubmission.

E. Use of substitutions for materials or details shown on the contract drawings or called for in these specifications require written approval from the Commission.

2.3 - PRODUCT DATA

A. Manufacturer's printed directions and manufacturer's standard specifications showing all dimensions, cuts, finishes, etc., as well as catalog cuts and ratings of all material will be required and shall be submitted in advance prior to application and/or installation.

2.4 - TESTS

A. Submit required reports listing items tested, tests conducted, and results obtained as specified.

2.5 - CERTIFICATIONS

A. Submit required certifications in written form identifying authorized representative, manufacturer, systems designer and other required data as specified.

TS-2-1

SGL #311 Fuel Storage Tank

2.6 - WARRANTIES

A. Refer to Specifications for required warranties. Copies of proposed warranties specified for products shall accompany the designated submittal of that product.

2.7 - OPERATION AND MAINTENANCE MANUALS

A. Manual Format (Use 3-ring binder):

1. Title page with the following information for each system covered:

a. Project Title and Contract Number (in capital letters)

b. Name of Company

c. Name of the individual to be called

d. Normal telephone numbers

e. Contractor's account number for project

2. Index listing all sections of the Manual.

3. Copies of all warranties for equipment or materials furnished in contract. (Index tabbed)

4. Complete system circuit diagrams, block diagrams, copies of all approved shop drawings, which shall clearly illustrate how all the components relate and how they are interconnected and a point wiring diagram.

5. Reports, testing analysis.

6. Operating instructions and maintenance instructions for all equipment and finish materials furnished.

7. All approved, shop drawings, descriptive data and any certifications.

2.8 - SUBMITTALS LIST

A. Abbreviations

1. Mfr - for Manufacturer

2. Prod - for Producer or Supplier

3. SHDR - for Shop Drawings

4. DeDa - for Descriptive Data or Catalog Cuts

5. Samp - for Samples

6. Cert - for Certification

7. Tests - required Test Reports

8. Warr – for Warranties

TS-2-2

SGL #311 Fuel Storage Tank

GENERAL CONSTRUCTION

DESCRIPTION OF ITEMS

TO BE SUBMITTED

MFR PROD SHDR DeDa SAMP CERT TESTS WARR

CONCRETE FOR

BOLLARDS

X X X X

FUEL STORAGE TANK X X X X X X X

LEAK MONITORING

SYSTEM

X X X

FUEL PUMP X X X

FUEL METER X X X

FUEL FILTER X X X

FUEL LINE HOSE X X X

FUEL NOZZLE X X X

STEEL PIPE X X X X

BOLLARD COVERS X X X

EMERGENCY POWER

DISCONNECT

X X X X

ELECTRICAL POWER

CONDUCTORS &

CONDUIT

X X

KEYED SWITCH X X X

PROJECT SCHEDULE X

FIRE EXTINGUISHER X X X X

TS-2-3

SGL #311 Fuel Storage Tank

TECHNICAL SPECIFICATION SECTION NO. 3 – Above Ground Fuel Storage Tank

3.1 - SCOPE

This work is to furnish and install a 1,000 gallon above ground fuel storage tank.

Included in this work will be related materials and items associated with the tank.

3.2 - MATERIALS

A. Storage Tank - Above ground storage tank shall contain 2 separate 500 gallon compartments and be of double wall construction. Tank shall meet UL standard 2085, Protected Aboveground Storage Tanks for Flammable and Combustible Liquids and UL standard 142, Aboveground Flammable Liquid Tanks. Overall storage tank shall be of rectangular shape with overall dimensions not be greater than 13' x 13' with all openings located on the top of the tank.

Storage tank shall meet the requirements of Executive Order VR-302 (current version). Tank shall include manufacturer’s recommended vents, vacuum relief ports, necessary caps, etc.

B. Secondary Containment - Double wall tank shall contain a true void interstitial monitoring area capable of detecting a leak in the primary containment tank. The secondary tank wall shall be of impervious outer wall steel. Material of secondary containment that may come in contact with the stored material shall be resistant to physical, chemical, or other failure during handling, installation and use. All exposed steel shall be coated to inhibit corrosion and meet ASTM B117.

C. Concrete Encasement - Concrete vault encasement consisting of 6" thick wall around all sides of the storage tank. Concrete design should include the following for long-term durability:

design strength of 4,000 psi, air entrainment, water-reducing admixture, and steel reinforcement. Concrete to be placed to ensure monolithic pour. Provide 3" support legs to allow for visual leak inspection. Pressurize storage tank to manufacturer recommendations to allow space for expansion and contraction of storage tank.

D. Leak Monitoring - Provide electric leak detection system that provides both visual and audible alert. Leak detection system shall have consistent power to ensure continuous monitoring. Power to be supplied by separate circuit from fuel pump systems.

E. Overfill Protection - Provide overfill containment for a minimum of 5 gallons for each fill valve.

F. Signs – Provide proper identification placards, one diesel and one gasoline, to be affixed to the tanks. Affix a “No Smoking” sign to the tank. Provide a free standing “No Smoking” sign and a “Stop Motor” sign to be placed near the storage tank.

3.3 - PROCEDURE

Install and secure fuel storage tank on existing concrete pad. Tank should be set so the back face is 3' from western edge of concrete pad. Install and test leak detection system as per manufacture's recommendation. Any exposed wire shall be properly protected within the specified conduit.

TS-3-1

SGL #311 Fuel Storage Tank

3.4 - MEASUREMENT AND PAYMENT

This price and payment shall constitute full compensation for complete installation of above ground storage tank, leak detection system, and overfill protection containment and as directed by PGC staff including but not limited to all labor, materials, equipment, supervision, accessories, disposal of waste and related work.

A. Unit of Measurement: Lump Sum.

TS-3-2

SGL #311 Fuel Storage Tank

TECHNICAL SPECIFICATION SECTION NO. 4 – Fuel Pump System

4.1 - SCOPE

This work is to furnish and install all components related to the fuel pump system for separate diesel and gasoline compartments.

4.2 – Material

A. Fuel Pump - Electric 110-volt fuel pumps capable of dispensing a minimum of 20 GPM of diesel and gasoline. Fuel pump shall contain vacuum breaker or similar functioning device.

B. Fuel Meter - Fuel dispense meter with accuracy of +/- 0.5% for a minimum flow of 20 GPM. Fuel meter shall have a manual reset function.

C. Fuel Filter – Provide 2 (1 diesel and 1 gasoline rated) screw on, canister type 10 micron or better fuel filters. Provide and additional two canister filter for each application.

D. Fuel Line Hose - Provide 2 ¾” fuel line hoses a minimum of 18' in length. Provide hose breakaway designed to detach with a maximum force of 300 lbs. Provide 45-degree hose swivel for attachment to fuel nozzle.

E. Fuel Nozzle - Provide 1 diesel fuel and 1 gasoline compatible fuel nozzle capable of dispensing diesel fuel and gasoline respectively. Fuel nozzles shall be ¾” in size and have an automatic shut-off feature.

4.3 - PROCEDURE

Install fuel pump system components in accordance with manufacture's recommendations.