FRP - ATTACHMENT B - FRP TOOL KIT SPECS 29 JAN 21.pdf

ATTACHMENT B - FRP TOOL KIT INDIVIDUAL ITEM SPECIFICATIONS

This specification is approved for use by all Departments and Agencies of the Department of Defense within the distribution limitations noted at the bottom of the page.

B1. BACKGROUND

B1.1. Scope. This technical characteristics describes the requirements for procuring the required hand tools, small engine powered equipment, consumables, and the ISO container need to bolt together and install the bolt- together fiber-reinforced polymer (FRP) panel assembly. The FRP mats function as expedient foreign object debris (FOD) covers for crushed- stone or debris backfill crater repairs as part the airfield damage repair (ADR) program.

B2. FRP TOOL KIT ITEMS REQUIREMENTS

B2.1. Generator, 6kW, Diesel, w/Wheel Kit. Two (2) generators, 6kW, Diesel, (NSN 8340-01-533-7678) w/Wheel Kit are required in the FRP Tool Kit. The generators is used to power all the electrical power tools in this tool kit for bolting together, installation, and during maintenance of the FRP mat panel assembly. Generator, 6kW, Diesel, shall be HDT Global part # 62-GENSET6KW or equivalent (see B2.1.1).

B2.1.1. Generator, 6kW, Diesel property.

• Engine: Kohler KD420, 401 cc, 9 hp, 3600 rpm at 60 Hz

• Output: Continuous – 5,000 W, Surge – 6,000 W, 120/240VAC, 60 Hz

• 120-volt receptacle: 4-NEMA 5-15 R receptacles w/CFCI protection & 1 NEMA L5-30R, 30 amp 3-wire twist-lock

• 240-volt receptacle: 1 NEMA 14-50R, 20 amp 4-wire

• Fuel capacity: 4-gal

• 12-volt electric start w/built-in battery charger

• Dimensions (L x W x H): 28-in x 22-in x 23-in

• System weight: 207-lbs

• Must include wheel set & handle (B2.2.) and 12-volt battery

B2.2. Wheel Kit for Generator, 6kW, Diesel. Two (2) Wheel kits for generators, 6kW, Diesel, (NSN 8340-01-533- 7678) are required in the FRP Tool Kit. The wheel kits allow for the easier movability during bolting together and installing the FRP mat panel assembly. Wheel kits, shall be HDT Global part # 62-GENSET6KW-WK.

B2.3. Compactor, Rammer. One (1) compactor, rammer required in the FRP Tool Kit. The compactor, rammer is required to ensure the crush stone material in the repaired crater is compacted before the installation of and/or during maintenance of the FRP mat panel assembly. Compactor, rammer shall be MultiQuip, part # MTX80SD or equivalent (see B2.3.1.).

B2.1.3.1. Compactor, rammer property.

• Blows per Min.: Up to 678

• Impact Force: 3505-lbf

• Shoe Jump Height: 3.1-in

• Shoe Dimensions: 13.4-in long x 11.2-in wide

• Travel Speed: 49.2-ft

• Fuel Tank Capacity: 2.7 quarts

• Overall Dimensions: 31-in length x 14.4-in wide x 40.4-in height.

B2.4. Compactor, Impact, Port, Hand, Soil. One (1) compactor, impact, port, hand, soil required in the FRP Tool Kit. This compactor is required to ensure the crush stone material in the repaired crater is compacted before the installation of and/or during maintenance of the FRP mat panel assembly. Compactor, rammer, shall be Wacker Neuson part# VP1550A or equivalent (see B2.4.1.).

B-1

B2.4.1. Compactor, rammer property.

• Centrifugal Force: 15,000 kN

• Vibrations: 5.880 1/min

• Engine: Gasoline/4-stroke

• Standard (Effective power): ISO 3046 IFN

B2.5. Pump, Trash. One (1) pump trash (NSN 3895-01-55305715) required in the FRP Tool Kit. This pump is required to remove any water from inside a blown crater, prior to the repair of any craters, before the installation of the FRP mat panel assembly. Pump, trash shall be MultiQuip part # MUL QP3TZ or equivalent (see B2.5.1.).

B2.5.1. Pump, trash property.

• Engine: Diesel/243cc

• Port Locations: Left & right sides

• Port Size: 3-in

• Can pass 1.5-in solids

• Frame: 1-in Tubular Steel

• Dimensions: 27-in length x 23.5-in width x 24-in height

• Must include a 12-volt battery (MultiQuip #0162212024) and strainer (MultiQuip #0742214080)

B2.6. Saw, K-12, Handheld, Power Cutter, 12-in. One (1) saw, K-12 is required in the FRP Tool Kit. This saw is required to cut airfield pavement or FRP mat before the installation of and/or during maintenance of installed FRP mat panel assembly. Saw, K-12, shall be Husqvarna part# 967181001or equivalent (see B2.6.1.).

B2.6.1. Saw, K-12, handheld, power cutter, 12-in property.

• Arbor Size: 1-in

• Blade Size: 12-in

• Engine Cycles: 2-Cycle

• Fuel Mix Ratio: 50:1

• MFG Model # (Series): K760II/12-in

• Wet Cutting Capable: Yes

B2.7. Hydraulic Power Unit. Two (2) hydraulic power units (NSN 2815-01-533-2471) are required in the FRP Tool Kit. These hydraulic power units are required operate all the hydraulic power tools during the installation of and/or during maintenance of installed FRP mat panel assembly. Saw, K-12 shall be Stanley (Black & Decker) part# HP18289M or equivalent (see B2.7.1.).

B2.7.1. Hydraulic power unit property.

• Output Capacity: 2 ea 5 or 8-gpm

• Pressure: 2000-psi

• Circuit Type: Open Center

• Reservoir Capacity: 3.2-gal

• Couplers: HTMA Flush Face

• Fuel Tank Capacity: 4.7-gal

• Engine: Briggs & Stratton 27-hp Vanguard OHV

• Dimensions: 37.5-in L x 25.75-in W x 30-in H

• Must include 12-volt battery (Part # 04303)

• Must include a wire basket to hold the hoses

B2.8. Hydraulic Hose Set w/Couplers, 25-ft long. Three (3) hydraulic hose sets w/couplers, 25-ft long (NSN 4720- 01-361-3663) are required in the FRP Tool Kit. These hydraulic hose sets are required to connect the hydraulic power units to the hydraulic power tools in this kit during the installation of and/or during maintenance of installed

B-2

FRP mat panel assembly. Hydraulic hose sets w/couplers, 25-ft long, Stanley (Black & Decker) part# 31973 or equivalent (see B2.8.1.).

B2.8.1. Hydraulic hose set w/couplers, 25-ft long property.

• Length: 25-ft

• Dia.: 1/2-in

• Dual Hose w/Couplers

• Hose are zip tied together

• Must be compatible with B2.7., B2.9., and B2.10.

B2.9. Hydraulic Hammer Drill. Two (2) hydraulic drills (NSN 5130-01-178-6338) are required in the FRP Tool Kit.

These hydraulic hammer drills are required to drill into the airfield pavements during the installation of and/or during maintenance of installed FRP mat panel assembly. Hydraulic hammer drills, Stanley (Black & Decker) part# HD45110B or equivalent (see B2.9.1.).

B2.9.1. Hydraulic hammer drill property.

• Capacity: up to 2-in dia. or 4-in core

• Length: 25.4-in

• Width: 14-in

• Hydraulic Pressure: 1500-2500-psi

• Input Flow: 3 to 9-gpm

• Porting: -8 SAE O-Ring

• Connect Size & Type: 3/8-in Male Pipe Head Hose End

• Max Pressure: 2000-psi

• Must be compatible with B2.8., Item B2.44., and Item B2.45.

B2.10. Auger, Hydraulic, 2-man handle, 150-rpm. Two (2) auger, hydraulic, 2-man handle, 150-rpm (NSN 3820- 01-486-4918) are required in the FRP Tool Kit. These auger, hydraulic, 2-man handle, 150-rpm are required to auger into the base course material under airfield pavements during the installation of and/or during maintenance of installed FRP mat panel assembly. The auger, hydraulic, 2-man handle, 150-rpm, Little Beaver part# HYD- 2MH150 or equivalent (see B2.10.1.).

B2.10.1. Hydraulic hammer drill property.

• Hydraulic auger

• Max. RPM: 150

• Max. Torque: 225-ft-lbs

• Must include handles

B2.11. Mixer, Paddle, Concrete, Single Paddle. Two (2) mixer, paddle, concrete, single paddle are required in the FRP Tool Kit. These mixer, paddle, concrete, single paddle required to mixer the rapid setting grout material and water during the installation of and/or during maintenance of installed FRP mat panel assembly. The mixer, paddle, concrete, single paddle, Collomix part# CNA X0-4HF or equivalent (see B2.11.1.).

B2.11.1. Mixer, paddle, concrete, single paddle property.

• Power: 13.1 amp / 1-13/32 hp

• Power supply: 110-125 V

• Rotation speed / Load: 0-590 rpm

• Mixing volume: up to 10-gal

• Comes with stirrer (paddle)

B2.12. Saw, Reciprocating, 12-AMP, w/ Case. One (1) saw, reciprocating, 12-amp, w/ case (NSN 5130-00-819- 7767) is required in the FRP Tool Kit. This saw, reciprocating, 12-amp, is required cut various items and/or

B-3 materials during the installation of and/or during maintenance of installed FRP mat panel assembly. The mixer, paddle, concrete, single paddle, Milwaukee part # MIL 6509-31or equivalent (see B2.12.1.).

B2.12.1. Saw, reciprocating, 12-amp, w/ case property.

• Power: 13.1 amp / 1-13/32 hp

• Power supply: 110-125 V

• Rotation speed / Load: 0-590 rpm

• Mixing volume: up to 10-gal

• Comes with stirrer (paddle)

B2.13. Wrench, Impact, 1/2-in Drive. Four (4) wrench, impact, 1/2-in drive (NSN 5130-01-940-7065) are required in the FRP Tool Kit. These wrenches, impact, 1/2-in drive are required secure and tighten all the joining and anchor bushings during the installation of and/or maintenance of installed FRP mat panel assembly. The wrench, impact, 1/2-in drive, Milwaukee part# 9070-20 or equivalent (see B2.13.1.).

B2.13.1. Wrench, impact, 1/2-in drive property.

• Electric Impact Wrench

• Drive Size: 1/2-in

• Anvil Type: Detent Pin

• Max. Blows per Minute: 2600

• Max. No Load RPM: 1800

• Handle Style: T-Handle

• Corded

• Tool Voltage: 120 Volt AC

B2.14. Drill, Hammer, Rotary, 1-3/4-in, SDS Max w/Case. Two (2) drill, hammer, rotary, 1-3/4-in, SDS max w/case are required in the FRP Tool Kit. These drill, hammer, rotary, 1-3/4-in, SDS max w/case are required to drill holes into the airfield pavements during the installation or maintenance of the installed FRP mat panel assembly.

The drill, hammer, rotary, 1-3/4-in, SDS max w/case, Milwaukee part# 5426-21 or equivalent (see B2.14.1.).

B2.14.1. Drill, hammer, rotary, 1-3/4-in, SDS max w/case property.

• Electric

• Corded

• Tool Voltage: 120 Volt AC

• Current: 14 AMPS

• Length: 18-in

• No Load RPM: 350-450

• No Load BPM: 2200/2840

• Bit Shank: SDS Max

• Solid Bit capacity: 1-3/4-in

• Drilling Mode: 2-Mode: Rotary Hammer & Hammer Only

• Must include Side Handle & Case

B2.15. Grinder, Angle, 4-1/2-in Wheel Dia. w/Case. One (1) grinder, angle, 4-1/2-in wheel dia., is required in the FRP Tool Kit. This grinder, angle, 4-1/2-in wheel dia., is required to grind down/cutoff various items in the airfield pavement during the installation of and/or maintenance of the installed FRP mat panel assembly. The grinder, angle, 4-1/2-in wheel dia., Milwaukee part# 6140-30 or equivalent (see B2.15.1.).

B2.15.1. Grinder, Angle, 4-1/2-in Wheel Dia. property.

• Electric

• Corded

• Tool Voltage: 120 Volt AC

• Current: 7 AMPS

B-4

• Wheel Dia. 4-1/2-in

• Spindle Thread Size: 5/8-in -11

• No Load RPM: 10000

• Tool Length: 11-51/64-in

• Speed Type: Single

• Handle Design: Barrel Grip

• Must include: backing flange, side handle, spanner wrench, & wheel guard

B2.16. Drill, Electric, 1/2-in Drive. One (1) drill, electric, 1/2-in drive is required in the FRP Tool Kit. This drill, electric, 1/2-in drive is required to drill holes in various sized into various items in support of the installation of and/or maintenance of the installed FRP mat panel assembly. The drill, electric, 1/2-in drive, Milwaukee part# 0235-21 or equivalent (see B2.16.1.).

B2.16.1. Drill, Electric, 1/2-in Drive property.

• Electric

• Corded

• Tool Voltage: 120 Volt AC

• Current: 5.5 AMPS

• Chuck Size: 1/2-in

• Keyless Chuck: Yes

• Trigger Lock: Yes

• Spindle: 1/2-in - 20

• Gear Train: Double

• Must include: side handle

B2.17. Compressor, Air, Portable Electric Oil-Lubricated. One (1) compressor, air, portable electric oil-lubricated is required in the FRP Tool Kit. This compressor, air, portable electric oil-lubricated is required to supply compressed air to remove small debris from the bottom of the drilled out holes in the airfield pavements for the installation of anchors in support of the installation of and/or maintenance of the installed FRP mat panel assembly. The compressor, air, portable electric oil-lubricated, DeWalt part# D55154or equivalent (see B2.17.1.).

B2.17.1. Compressor, Air, Portable Electric Oil-Lubricated property.

• Electric

• Corded

• Tool Voltage: 120 Volt AC

• Full Load AMPS: 14

• HP – Air Compressor: 1.10

• Tank Style: Twin Stack

• Tank Size: 4.0-Gal

• Max. Pressure – Air Compressor: 125-psi

• (F)NPT Outlet: 1/4-in

• Standards: ISO1217

• Overall Size: 22-in long x 18-1/2-in wide x 23-in height

• Weight – Air Compressor: 87-lbs

B2.18. Airfield Deluxe Dynamic Cone Penetrometer (DCP) Kit. One (1) airfield deluxe dynamic cone penetrometer (DCP) kit (NSN 6635-01-436-6096) is required in the FRP Tool Kit. This airfield deluxe dynamic cone penetrometer (DCP) kit is required to check/verify that the correct soil stabilization has been achieved of the crush stone material in the crater before the installation of and/or maintenance of the installed FRP mat panel assembly.

The airfield deluxe dynamic cone penetrometer (DCP) kit, Kessler part# K100AD or equivalent (see B2.18.1.).

B2.18.1. Airfield deluxe dynamic cone penetrometer (DCP) kit property.

B-5

• Kit Includes:

o 48-in extra strong drive rod (Product #K1348S) o 100 Disposable Cones (4 Packages of 25) (Product #K900) o 2 Cone Adapters (Product #K800) o 50-in Vertical Scale (Product #K533) w/ an Upper Attachment (Product #K530) o Vertical Scale Lower Attachment or foot (Product #K510) o Must include case w/foam cutout inserts

B2.19. Heavy-Duty Steel Chest w/Site-Vault Security System, 72-in Long. Two (2) heavy-duty steel chest w/site-vault security system, 72-in long are required in the FRP Tool Kit. These heavy-duty steel chest w/site-vault security system, 72-in long are required to store/secure various power tools, hand tools, and consumables for the FRP tool kit during shipment and long term storage of this kit. The heavy-duty steel chest w/site-vault security system, 72-in long, JoBox part# 1-658990 or equivalent (see B2.19.1.).

B2.19.1. Heavy-Duty steel chest w/site-vault security system, 72-in long, property.

• Size: 72-in long w/23.3 cubic ft of usable storage space

• Dimensions: 72-in x 24-in x 27-3/4-in

• One-piece 7-gauge reinforced bolster on both ends

• Full-length A-frame lid bolster

• Corrosion-resistant textured powder paint

• Staked & welded hinges

B2.20. Cord, Extension, GFCI, 50-Ft. Four (4) Cord, extension, GFCI, 50-ft are required in the FRP Tool Kit.

These cords, extension, GFCI, 50-ft are required to supply power from the generator 6kW to the electrical power tools during the bolting together of, the installation of and/or maintenance of the installed FRP mat panel assembly.

The cord, extension, GFCI, 50-ft, Home Depot part# 3043806-01 or equivalent (see B2.20.1.).

B2.20.1. Cord, extension, GFCI, 50-ft property.

• Indoor/outdoor heavy duty extension cord,

• One, 3-way outlet;

• Gauge 14awg

• 3 conductor

• 15 amp rating

• 50 foot cord

B2.21. Paddle, Concrete, Mixer. Eight (8) paddles, concrete, mixer are required in the FRP Tool Kit. These paddles, concrete, mixer are required to mixer the rapid setting grout material and water for securing the tri-talon anchors into the base course material under the airfield pavement during the installation of and/or maintenance of the installed FRP mat panel assembly. The paddle, concrete, mixer, Collomix part# CNA MKD140HF or equivalent (see B2.21.1.).

B2.21.1. Paddle, Concrete, Mixer property.

• Dual mixing paddles 8 - 15-gal

• Designed for mixing mortars

• Quick disconnect

• 5-1/2-in (140 mm) paddle diameter

• Must be compatible with item B2.11.

B2.22. Air Hose, Rubber, 3/8-in x 50-ft w/1/4-in MNPT fitting both ends. Two (2) air hose, rubber, 3/8-in x 50-ft w/1/4-in MNPT fitting both ends are required in the FRP Tool Kit. These air hoses, rubber, 3/8-in x 50-ft w/1/4-in MNPT fitting both ends, supply air from the air compressor to the different pneumatic tools in the FRP tool kit, B-6 before, during installation of and/or maintenance of the installed FRP mat panel assembly. The air hose, rubber, 3/8-in x 50-ft w/1/4-in MNPT fitting both ends, Goodyear part# 121051or equivalent (see B2.22.1.).

B2.22.1. Air Hose, Rubber, 3/8-in x 50-ft w/1/4-in MNPT fitting both ends property.

• Hose Dia. 3/8-in

• Hose Length: 50-ft

• Hose Material: Rubber

• Hose Outlet Size (in. MNPT): 1/4-in

• Hose Outlet Material: Brass

• Max. PSI: 250-psi

• Each hose must have one (1) each installed: Item B2.23 and B2.24.

B2.23. Brass Coupler, 1/4-in FNPT x 1/4-in Female Quick Disconnect. Two (2) brass coupler, 1/4-in FNPT x 1/4-in female quick disconnect are required in the FRP Tool Kit. These brass couplers, 1/4-in FNPT x 1/4-in female quick disconnect, connects the air compressor to the various pneumatic hand tools in this kit before, during the installation of and/or maintenance of the installed FRP mat panel assembly. The brass coupler, 1/4-in FNPT x 1/4-in female quick disconnect, Parker part # B23 or equivalent (see B2.23.1.).

B2.23.1. Brass Coupler, 1/4-in FNPT x 1/4-in Female Quick Disconnect property.

• Material: Brass

• Pipe Size: 1/4-in

• Hose Connection – Quick Connect Air Couplings: FNPT

• Max. Pressure: 300-psi

• Locking Type – Quick Connect Air Coupling: Sleeve

• Must be installed one (1) each on each Item B2.22.

B2.24. Brass Coupler, 1/4-in FNPT x 1/4-in Male Quick Disconnect. Two (2) brass couplers, 1/4-in FNPT x 1/4-in male quick disconnect are required in the FRP Tool Kit. These brass couplers, 1/4-in FNPT x 1/4-in male quick disconnect, connects the air compressor to the various pneumatic hand tools in this kit before, during the installation of and/or maintenance of the installed FRP mat panel assembly. The brass coupler, 1/4-in FNPT x 1/4-in male quick disconnect, Dixon Valve part # DCP20B or equivalent (see B2.24.1.).

B2.24.1. Brass Coupler, 1/4-in FNPT x 1/4-in male quick disconnect property.

• Material: Brass

• Pipe Size: 1/4-in

• Hose Connection – Quick Connect Air Couplings: FNPT

• Max. Pressure: 300-psi

• Must be installed one (1) each on each Item B2.22.

B2.25. Compressor, Wand, Compressed Air, 36-in length. Two (2) compressor, wands, compressed air, 36-in length, are required in the FRP Tool Kit. These compressor, wands, compressed air, 36-in length, removes debris out of the drilled holes in the airfield pavements for installing the anchors during the installation of and/or maintenance of the installed FRP mat panel assembly. The compressor, wands, compressed air, 36-in length, Guardair part# U80LJ036AA2 or equivalent (see B2.25.1.).

B2.25.1. Compressor, wand, compressed air, 36-in length property.

• Air Gun Body Style: Pistol Grip

• Air Gun Inlet Size: 3/8-in (F)NPT

• Extension Size: 36-in

• Trigger: Lever

• Output: 1.9-LbF

• Max. Inlet Pressure: 120-psi

B-7

• Air Consumption: 40-scfm

• Outlet Size: 3/4-in – 32

• Overall Length: 43-in

• Each wand must have one (1) installed: Item B2.26.

B2.26. Brass Coupler, 3/8-in MNPT x 1/4-in Male Quick Disconnect. Two (2) brass couplers, 3/8-in MNPT x 1/4-in male quick disconnect are required in the FRP Tool Kit. These brass couplers, 3/8-in MNPT x 1/4-in male quick disconnect, connects the wand to the air hose during the installation of and/or maintenance of the installed FRP mat panel assembly. The brass coupler, 3/8-in MNPT x 1/4-in male quick disconnect, Dixon Valve part # DCP2103B or equivalent (see B2.26.1.).

B2.26.1. Brass Coupler, 3/8-in MNPT x 1/4-in male quick disconnect property.

• Material: Brass

• Connector Type: Plug X NPT Male

• Max. Flow Rate: 37-cfpm at 100-psi

• Size: 1/4-in x 3/8-in

• Must be installed one (1) each on each Item B2.25.

B2.27. Hose, Suction, 20-ft, 3-in, Quick Couplers. One (1) hose, suction, 20-ft, 3-in, quick couplers is required in the FRP Tool Kit. Hose, suction, 20-ft, 3-in, quick couplers, connects the pump, trash to remove water out of the crater, before the crater repair process can begin. The hose, suction, 20-ft, 3-in, quick couplers, Wacker Neuson part# 5000183440-SH or equivalent (see B2.27.1.).

B2.27.1. Hose, suction, 20-ft, 3-in, quick couplers property.

• Hose Dia.: 3-in

• Hose Length: 20-ft

• Quick Couplers (cam-lock) on both ends

• Must be compatible with Item B2.5.

B2.28. Hose, Discharge, 50-ft, 3-in, Quick Coupler. One) Hose, discharge, 50-ft, 3-in, quick coupler is required in the FRP Tool Kit. This hose, discharge, 50-ft, x-in, quick coupler, connects the pump, trash to remove water out of the crater, before the crater repair process can begin. The hose, discharge, 50-ft, 3-in, quick coupler, Wacker Neuson, part# 5000183440-DH or equivalent (see B2.28.1.).

B2.28.1. Hose, Discharge, 50-ft, 3-in, quick coupler property.

• Hose Dia.: 3-in

• Hose Length: 50-ft

• Quick Coupler (cam-lock)

• Lay-Flat Hose

• Must be compatible with Item B2.5.

B2.29. Coupling, Cam-lock, Stainless Steel, 3-in. Three (3) coupling, cam-lock, stainless steel, 3-in are required in the FRP Tool Kit. These coupling, cam-lock, stainless steel, 3-in, connects the pump trash to the suction hose, discharge hose and suction screen during waster mitigation before the installation FRP mat panel assembly. The coupling, cam-lock, stainless steel, 3-in, Camlock-fittings part# A300-SS or equivalent (see B2.29.1.).

B2.29.1. Coupling, Cam-lock, Stainless Steel, 3-in property.

• Material: Stainless Steel

• Cam & Groove Male Adapter x Female NPT Thread

• Must be compatible with Items B2.5; B2.27 and B2.28

• Must be installed on Item B2.5.

B-8

B2.30. Blade, Saw, Reciprocating, 4-in, 24-TPI, 5-pack. Four (4) blade, saw, reciprocating, 4-in, 24-TPI, 5-pack are required in the FRP Tool Kit. These blade, saw, reciprocating, 4-in, 24-TPI, 5-pack, are used with saw, reciprocating to cut various items in support of the installation of and/or the maintenance of FRP mat panel assembly. The blade, saw, reciprocating, 4-in, 24-TPI, 5-pack, Milwaukee part# 48-1-5185 or equivalent (see B2.30.1.).

B2.30.1. Blade, Saw, Reciprocating, 4-in, 24-TPI, 5-pack property.

• Primary Saw Application: Metal

• Teeth per Inch: 24

• Length: 4-in

• Material: Bi-Metal

• Height: 3/4-in

• Shank: 1/2-in Universal

• Must be useable with Item B2.1.12

B2.31. Blade, Saw, Reciprocating, 6-in, 14-TPI, 5-pack. Four (4) blades, saw, reciprocating, 6-in, 14-TPI, 5-pack are required in the FRP Tool Kit. These blades, saw, reciprocating, 6-in, 14-TPI, 5-pack, are used with saw, reciprocating to cut various items in support of the installation of and/or the maintenance of FRP mat panel assembly. The blade, saw, reciprocating, 6-in, 14-TPI, 5-pack, Milwaukee part# 48-00-5785 or equivalent (see B2.31.1.).

B2.31.1. Blade, Saw, Reciprocating, 6-in, 14-TPI, 5-pack property.

• Primary Saw Application: Metal

• Teeth per Inch: 14

• Length: 6-in

• Material: Bi-Metal

• Height: 1-in

• Shank: 1/2-in Universal

• Must be useable with Item B2.1.12

B2.32. Bit, Hammer Drill, SDS Max, 3/4-in dia. x 21-in long w/15-in usable length. Ten (10) bit, hammer drill, SDS max, 3/4-in dia. x 21-in long w/15-in usable length are required in the FRP Tool Kit. These bits, hammer drill, SDS Max, 3/4-in dia. x 21-in long w/15-in usable length, are used with the electric hammer drill to drill holes in the air pavement during the installation of and/or the maintenance of FRP mat panel assembly. The bit, hammer drill, SDS max, 3/4-in dia. x 21-in long w/15-in usable length, Milwaukee part # 48-20-3932 or equivalent (see B2.32.1.).

B2.32.1. Bit, Hammer Drill, SDS Max, 3/4-in dia. x 21-in long w/15-in usable length property.

• Item: Hammer Drill Bit

• Shank Shape: SDS Max

• Drill Bit Size: 3/4-in

• Drilling Length: 15-in

• Overall Length: 21-1/2-in

• Number of Cutter Heads: 4

• Must be useable with Item B2.14.

B2.33. Bit, Hammer Drill, SDS Max, 2-in dia. x 23-in long w/18-in usable length. Ten (10) bits, hammer drill, SDS max, 2-in dia. x 23-in long w/18-in usable length are required in the FRP Tool Kit. These bits, hammer drill, SDS max, 2-in dia. x 23-in long w/18-in usable length, are used with the electric hammer drill to drill holes in the air pavement during the installation of and/or the maintenance of FRP mat panel assembly. The hammer drill, SDS max, 2-in dia. x 23-in long w/18-in usable length, Milwaukee part # 48-20-3993 or equivalent (see B2.33.1.).

B2.33.1. Bit, Hammer Drill, SDS Max, 2-in dia. x 23-in long w/18-in usable length property.

B-9

• Item: Hammer Drill Bit

• Shank Shape: SDS Max

• Drill Bit Size: 2-in

• Drilling Length: 18-in

• Overall Length: 23-in

• Number of Cutter Heads: 4

• Must be useable with Item B2.1.14.

B2.34. Grinder, Angle, Metal Cut-off Wheel, 4-1/2-in Dia. Twenty (20) grinder, angle, metal cut-off wheels, 4-1/2-in dia. are required in the FRP Tool Kit. These grinder, angle, metal cut-off wheels, 4-1/2-in dia., are used with the electric grinder down/off various items in support of the installation of and/or the maintenance of FRP mat panel assembly. The grinder, angle, metal cut-off wheel, 4-1/2-in dia., Grainger part# 33N322 or equivalent (see B2.34.1.).

B2.34.1. Grinder, Angle, Metal Cut-off Wheel, 4-1/2-in Dia. property.

• Abrasive Wheel Type: Type 27

• Abrasive Grit: 24

• Abrasive Wheel Diameter: 4-1/2-in

• Thickness: 0.045-in

• Arbor Hole Size: 5/8-in – 11

• Max. RPM: 13580

• Grade: Extra Course

• Must be usable with Item B2.15.

B2.35. Saw, Hole, Mandrel. Two (2) saw, hole, mandrels are required in the FRP Tool Kit. These saw, hole, mandrel, are used with the electric drill to drill holes into the FRP mat panels in support of the installation of and/or the maintenance of FRP mat panel assembly. The saw, hole, mandrel, Grainger part# 5TJD0 or equivalent (see B2.35.1.).

B2.35.1. Saw, hole, mandrel property.

• Item: Quick Change Hole Saw Arbor

• Shank Size: 7/16-in

• Shank Shape: hex

• Thread Size: 5/8-in - 18

• Fits Hole Saw Dia.: 1-1/4-in and Larger

• Pilot Drill Size: 1/4-in dia. x 3-1/2-in long

• Material: High Speed Steel

• Includes: Thunderbolt (R) Pilot Bit

• Must be compatible with Item B1.36

B2.36. Saw, Hole, 2-1/2-in Dia. Six (6) Saws, hole, 2-1/2-in dia. are required in the FRP Tool Kit. These saws, hole, 2-1/2-in dia., are used with the electric drill and saw, hole, mandrel to drill holes into the FRP mat panels in support of the installation of and/or the maintenance of FRP mat panel assembly. The saw, hole, 2-1/2-in dia., Grainger part# 3TGP2 or equivalent (see B2.36.1.).

B2.36.1. Saw, hole, 2-1/2-in dia. property.

• Item: Hole Saw

• Saw Dia.: 2-1/2-in

• Max. Cutting Depth: 1-5/8-in

• Tooth Material: Bi-Metal

• Teeth per Inch: 4/5

• Thread Size: 5/8-in - 18

B-10

• Shank Size: 3/8-in Hex, 7/16-in Hex

• Pilot Drill Size: 1/4-in dia. X 3-1/2-in long

• Must be compatible with Item B2.35.

B2.37. Auger, Earth, 2-in dia. x 36-in Flight Shaft. Six (6) auger, earth, 2-in dia. x 36-in flight shafts are required in the FRP Tool Kit. These auger, earth, 2-in dia. x 36-in flight shafts, are used with the hydraulic auger to auger through the base material under airfield pavements in support of the installation of and/or the maintenance of FRP mat panel assembly. The auger, earth, 2-in dia. x 36-in flight shaft, Little Beaver part# 2X36-HSL or equivalent (see B2.37.1.).

B2.37.1. Auger, Earth, 2-in dia. x 36-in flight shaft property.

• Auger Flight Size Dia.: 2-in

• Auger Flight Length: 36-in

B2.38. Hex to Square Auger Adaptor, 1-1/2-in and 2-in. Three (3) hex to square auger adaptors, 1-1/2-in and 2-in are required in the FRP Tool Kit. These hex to square auger adaptors, 1-1/2-in and 2-in, are used to secure the hydraulic auger and auger flights together while auguring through the base material under airfield pavements in support of the installation of and/or the maintenance of FRP mat panel assembly. The hex to square auger adaptor, 1-1/2-in and 2-in, Little Beaver part# 9061-H or equivalent (see B2.38.1.).

B2.38.1. Hex to Square Auger Adaptor, 1-1/2-in and 2-in property.

• Used to connect Items B2.10 and B2.37 together during operations

B2.39. Auger, Chisel Points, Carbide, 2-in. Twenty-four (24) auger, chisel points, carbide, 2-in are required in the FRP Tool Kit. These auger, chisel points, carbide, 2-in, are connect to the working end of auger flights while auguring through the base material under airfield pavements in support of the installation of and/or the maintenance of FRP mat panel assembly. The auger, chisel points, carbide, 2-in, Little Beaver part# 9023-C2H or equivalent (see B2.39.1.).

B2.39.1. Auger, Chisel Points, Carbide, 2-in property.

• 2-in Carbide chisel point

B2.40. Auger, Locking Pin, 1-1/2-in to 2-in Hex. Twenty-one (21) auger, locking pins, 1-1/2-in to 2-in Hex are required in the FRP Tool Kit. These auger, locking pins, 1-1/2-in to 2-in Hex, are used to secure various hydraulic auguring items together while auguring through the base material under airfield pavements in support of the installation of and/or the maintenance of FRP mat panel assembly. The auger, locking pin, 1-1/2-in to 2-in Hex, Little Beaver part# 9041-2 or equivalent (see B2.40.1.).

B2.40.1. Auger, Locking Pin, 1-1/2-in to 2-in Hex property.

• Used to connect Items B2.10., B2.37., B2.38., and B2.39. together during operations

B2.41. Auger, Torque Tube, Short. Two (2) auger, torque tubes, short are required in the FRP Tool Kit. These auger, torque tubes, short, are used to secure hydraulic auger to a stationary vehicle during auguring through the base material under airfield pavements in support of the installation of and/or the maintenance of FRP mat panel assembly. The auger, torque tube, short, Little Beaver part# 9092-M or equivalent (see B2.41.1.).

B2.41.1. Auger, torque tube, short property.

• Used to connect Items B2.37., and B2.42. together during operations

B2.42. Auger, Torque Tube, Universal Type Bracket. Two (2) auger, torque tube, universal type brackets are required in the FRP Tool Kit. These auger, torque tube, universal type brackets, are used to secure hydraulic auger to a stationary vehicle during auguring through the base material under airfield pavements in support of the

B-11 installation of and/or the maintenance of FRP mat panel assembly. The auger, torque tube, universal type bracket, Little Beaver part# UTB-9092-M or equivalent (see B2.42.1.).

B2.42.1. Auger, torque tube, universal type bracket property.

• Used to connect Items B2.41., and B2.43. together during operations

B2.43. Pintle Hook Mounting Plate. Two (2) pintle hook mounting plates are required in the FRP Tool Kit. These pintle hook mounting plates, are used to secure hydraulic auger to a stationary vehicle during auguring through the base material under airfield pavements in support of the installation of and/or the maintenance of FRP mat panel assembly. The pintle hook mounting plate, AMS Industries LLC part# 64X22X6 or equivalent (see B2.43.1.).

B2.43.1. Pintle Hook Mounting Plate property.

• Contractor shall procure or manufacture the pintle hook mounting plate per the specifications on Drawing

Pintle Hitch Receiver on page B-40 of this attachment.

B2.44. Bit, Rock, 2-in dia. x 24-in long Shaft-Flighted. Ten (10) bits, rock, 2-in dia. x 24-in long shaft-flighted are required in the FRP Tool Kit. These bits, rock, 2-in dia. x 24-in long shaft-flighted are used with the hydraulic hammer drill to drill holes in the air pavement during the installation of and/or the maintenance of FRP mat panel assembly. The bit, rock, 2-in dia. x 24-in long shaft-flighted, Tru-Cut # P736.200024 or equivalent (see B2.44.1.).

B2.44.1. Bit, Rock, 2-in dia. x 24-in long Shaft-Flighted property.

• Dia.: 2-in

• Length: 24-in

• 736 Hex Bit

• Flighted

• Must be compatible/useable with Item B2.9.

B2.45. Bit, Drill, 3/4-in dia. x 24-in long Shaft-Flighted. Ten (10) bits, rock, 3/4-in dia. x 24-in long shaft-flighted are required in the FRP Tool Kit. These bits, rock, 3/4-in dia. x 24-in long shaft-flighted are used with the hydraulic hammer drill to drill holes in the air pavement during the installation of and/or the maintenance of FRP mat panel assembly. The bit, rock, 3/4-in dia. x 24-in long shaft-flighted, Tru-Cut # P736.75024 or equivalent (see B2.45.1.).

B2.45.1. Bit, Rock, 3/4-in dia. x 24-in long Shaft-Flighted property.

• Dia.: 3/4-in

• Length: 24-in

• 736 Hex Bit

• Flighted

• Must be compatible/useable with Item B2.9.

B2.46. Tool Bag, Canvas, 18-in. Four (4) tool bags, canvas, 18-in are required in the FRP Tool Kit. These tool bags, canvas, 18-in are used to store/secure various power tools, hand tools, and consumables for the FRP tool kit during shipment and long term storage of this kit. The Tool Bag, Canvas, 18-in, Klein part# 5102-18 or equivalent (see B2.46.1.).

B2.46.1. Tool Bag, Canvas, 18-in property.

• Heavy-duty No. 8 natural canvas

• Rivet-reinforced

• Steel-frame mouth w/hinges

• 2 retaining straps w/buckets

• Overall Length: 18-in

• Overall Height: 14-in

• Overall Width: 6-in

B-12

B2.47. Tool Bag, Canvas, 22-in. Four (4) tool bags, canvas, 22-in are required in the FRP Tool Kit. These tool bags, canvas, 22-in are used to store/secure various power tools, hand tools, and consumables for the FRP tool kit during shipment and long term storage of this kit. The tool bag, canvas, 22-in, Klein part# 5102-22 or equivalent (see B2.46.1.).

B2.47.1. Tool Bag, Canvas, 22-in property.

• Heavy-duty No. 8 natural canvas

• Rivet-reinforced

• Steel-frame mouth w/hinges

• 2 retaining straps w/buckets

• Overall Length: 22-in

• Overall Height: 15-in

• Overall Width: 6-in

B2.48. Tool Bag, Canvas, 24-in. Four (4) tool bags, canvas, 24-in are required in the FRP Tool Kit. These tool bags, canvas, 24-in are used to store/secure various power tools, hand tools, and consumables for the FRP tool kit during shipment and long term storage of this kit. The tool bag, canvas, 24-in, Klein part# 5102-24 or equivalent (see B2.48.1.).

B2.48.1. Tool Bag, Canvas, 24-in property.

• Heavy-duty No. 8 natural canvas

• Rivet-reinforced

• Steel-frame mouth w/hinges

• 2 retaining straps w/buckets

• Overall Length: 24-in

• Overall Height: 15-in

• Overall Width: 6-in

B2.49. UN HAZ Mat Box (10.25-in x 10.25-in x 12.5-in) w/Vermiculite. One (1) UN HAZ Mat Box (10.25-in x 10.25-in x 12.5-in) w/vermiculite is required in the FRP Tool Kit. This UN HAZ Mat Box (10.25-in x 10.25-in x 12.5-in) w/vermiculite is used to store/various oil based consumables in the FRP tool kit during shipment and long term storage of this kit. UN HAZ Mat Box (10.25-in x 10.25-in x 12.5-in) w/Vermiculite, Compliance Center part # BX-54E or equivalent (see B2.49.1.).

B2.49.1. UN HAZ Mat Box (10.25-in x 10.25-in x 12.5-in) w/Vermiculite property.

• Un HazMat Box, 4-gal capacity

• Size: 10.25-in x 10.25-in x 12.5-in

• Used to secured Items B2.50.; B2.51.; and B2.52.

B2.50. Oil, Synthetic, Premium Air Compressor (1-gal). One (1) oil, synthetic, premium air compressor (1-gal) is required in the FRP Tool Kit. This oil, synthetic, premium air compressor (1-gal) is used to provide oil to the air compressor and various pneumatic tools in FRP tool kit during installation of and/or maintenance of the installed FRP mat panel assembly. The oil, synthetic, premium air compressor (1-gal), Amsoil or equivalent (see B2.50.1.).

B2.50.1. Oil, Synthetic, Premium Air Compressor (1-gal) property.

• ISO 100, SAE 30/40

• Size: 1-gal

• This product will be stored/sealed inside B2.49.

B2.51. Oil, Hydraulic, DTE 24 ISO 32 SAE 10 (1-gal). Two (2) oil, hydraulic, DTE 24 ISO 32 SAE 10 (1-gal) are required in the FRP Tool Kit. These oil, hydraulic, DTE 24 ISO 32 SAE 10 (1-gal) are used to provide hydraulic oil to the hydraulic power unit and the various hydraulic tools in FRP tool kit during installation of and/or maintenance

B-13 of the installed FRP mat panel assembly. The oil, hydraulic, DTE 24 ISO 32 SAE 10 (1-gal), Exxon/Mobile part # Mobil DTE 24 or equivalent (see B2.51.1.).

B2.51.1. Oil, hydraulic, DTE 24 ISO 32 SAE 10 (1-gal) property.

• Series: DTE 24

• ISO Viscosity Grade: 32

• SAE Grade 10

• Base Oil: Mineral

• Container Size: 1-gal

• Standards: Dension HF-O, Vickers V-104C & 35VQ25 & Sundstrands Pump Tests

• This product will be stored/sealed inside B2.49.

B2.52. Oil, 2-Cycle, Synthetic Blend (1-quart). Two (2) oil, 2-cycle, synthetic blend (1-quart) are required in the FRP Tool Kit. These oil, 2-cycle, synthetic blend (1-quart) are used to provide mixed gas for the K-12 saw in the FRP tool kit for use before, during installation of and/or maintenance of the installed FRP mat panel assembly. The Oil, 2-Cycle, Synthetic Blend (1-quart), Valvoline part# TCW3-822384 or equivalent (see B2.52.1.).

B2.521. Oil, 2-Cycle, Synthetic Blend (1-quart) property.

• Base: Synthetic Blend

• Size: 1 quart

• Standards: ASTM, API TC, NMMA, TC-W3 certified

• This product will be stored/sealed inside B2.49.

B2.53. Towels, Paper, Shop, 400 count box. Six (6) towels, paper, shop, 400 count boxes (NSN 7920-01-370-1365) are required in the FRP Tool Kit. These towels, paper, shop, 400 count box are used to clean hands and various items in the FRP tool kit for use before, during installation of and/or maintenance of the installed FRP mat panel assembly. The towels, paper, shop, 400 count box, (NSN 7920-01-370-1365) or equivalent (see B2.53.1.).

B2.53.1. Towels, Paper, Shop, 400 count box property.

• Towel Size: 13-1/4-in x 16-1/2-in

• Material: 100 pct non-cotton cellulose

• Box Size: 400 count

B2.54. Chain, 3/8-in, GRADE 100, 20-ft w/grab hooks. Two (2) chains, 3/8-in, GRADE 100, 20-ft w/grab hooks are required in the FRP Tool Kit. These chains, 3/8-in, GRADE 100, 20-ft w/grab hooks are used move the assembled FRP mat panels into position over or off of the repaired crater(s), during installation of and/or maintenance of the installed FRP mat panel assembly. The chain, 3/8-in, GRADE 100, 20-ft w/grab hooks Grainger part # G10-38-20 or equivalent (see B2.54.1.).

B2.54.1. Chain, 3/8-in, GRADE 100, 20-ft w/grab hooks property.

• Welding Type: Welded

• For Lifting: Yes

• Chain Link Style: Straight

• Grade: 100

• Trade Size: 3/8-in

• Length: 20-ft

• Working Load Limit: 8800-lbs

• With Grab Hooks

B2.55. Cable Wrap, Large (4-in). Four (4) cable wraps, large (4-in) are required in the FRP Tool Kit. These cable wraps, large (4-in) are used to secure the extension cords in the FRP tool kit, during shipment, in long term storage, and before/after use during the installation of and/or the maintenance of the FRP mat panel assembly. The cable wrap, large (4-in), Gardner Bender part # CWT4RR20 or equivalent (see B2.55.1.).

B-14

B2.55.1. Cable wrap, large (4-in) property.

• Size: 4-in

• Color: Red/Black

B2.56. Cable Wrap, Medium (3-in). One (1) cable wrap, medium (3-in) is required in the FRP Tool Kit. This cable wrap, medium (3-in) is used to secure the electrical cords of various electrical power tools in the FRP tool kit, during shipment, in long term storage, and before/after use during the installation of and/or the maintenance of the FRP mat panel assembly. The cable wrap, medium (3-in), Gardner Bender part # CWT3RR25 or equivalent (see B2.56.1.).

B2.56.1. Cable wrap, medium (3-in) property.

• Size: 3-in

• Color: Red/Black

B2.57. Cable Wrap, Small (2-in). Four (4) cable wraps, small (2-in) are required in the FRP Tool Kit. These cable wraps, small (2-in) are used to secure the electrical cords of various electrical power tools in the FRP tool kit, during shipment, in long term storage, and before/after use during the installation of and/or the maintenance of the FRP mat panel assembly. The cable wrap, small (2-in), Gardner Bender part # CWT2RR25 or equivalent (see B2.57.1.).

B2.57.1. Cable Wrap, Small (2-in) property.

• Size: 2-in

• Color: Red/Black

B2.58. Funnel Plastic, Transmission. Eight (8) funnels plastic, transmission are required in the FRP Tool Kit.

These funnels plastic, transmission are used to place the mixed grout into the augured anchor holes in the pavement/base material under the assembled FRP mat panel assembly, during the installation of and/or the maintenance of the FRP mat panel assembly. The funnel plastic, transmission, Hopkins 5034 or equivalent (see B2.58.1.).

B2.58.1. Funnel Plastic, Transmission property.

• Material: High Density Polyethylene

• Size: 5-in x 5-in x 17.75-in

B2.59. Tow Strap, 2-in wide x 3-ft long w/Loops. Two (2) tow strap, 2-in wide x 3-ft long w/loops are required in the FRP Tool Kit. These tow straps, 2-in wide x 3-ft long w/loops are used move the assembled FRP mat panels into position over or off of the repaired crater(s), during installation of and/or maintenance of the installed FRP mat panel assembly. The tow strap, 2-in wide x 3-ft long w/loops, J Henry Holland part# 2837808 or equivalent (see B2.59.1.).

B2.59.1. Tow strap, 2-in wide x 3-ft long w/loops property.

• Dimension: 2-in wide x 3-ft long

• Eye Length: 15.7-in

• Material: Polyester

• Rated Capacity:

o Vertical: 6,400-lbs o Choker: 5,120-lbs o Basket: 12,800-lbs

B2.60. Hammer, Sledge, 10-lb. Two (2) hammers, sledge, 10-lb are required in the FRP Tool Kit. These hammers, sledge, 10-lb are used to support the installation of and/or maintenance of the installed FRP mat panel assembly.

The hammer, sledge, 10-lb, Grainger part # 48TE29 or equivalent (see B2.60.1.).

B-15

B2.60.1. Hammer, Sledge, 10-lb property.

• Handle Length: 32-in nominal

• Handle Material: Glass fiber

• Specification standard data: 05047-asme b107.54 professional/industrial association standard

• Head weight: 10-lbs

• Style designator: Sledge, blacksmith’s double faced

B2.61. Shovel, Round Head, 48-in Handle, Non-Conductive. Two (2) shovels, round head, 48-in handle, non-conductive are required in the FRP Tool Kit. These shovels, round head, 48-in handle, non-conductive are used to support the installation of and/or maintenance of the installed FRP mat panel assembly. The shovel, round head, 48-in handle, non-conductive, Nupla part # 76245 or equivalent (see B2.61.1.).

B2.61.1. Shovel, round head, 48-in handle, non-conductive property.

• Blade construction type: Open back

• Blade length: 11.5-in minimum and 12.5-in maximum

• Blade width: 8.5-in minimum and 9-in maximum

• Digging implement style: Round point

• Handle length: 48-in

• Handle type: Long style

• Material: Steel blade/Non-Conductive handle

• Size designator: 2

B2.62. Bar, Crow, 3-ft. One (1) bar, crow, 3-ft is required in the FRP Tool Kit. This bar, crow, 3-ft are used to support the installation of and/or maintenance of the installed FRP mat panel assembly. The bar, crow, 3-ft, Stanley part # 55-136 or equivalent (see B2.62.1.).

B2.62.1. Bar, crow, 3-ft property.

• Overall Length: 3-ft

• Dia.: 3/4-in

• Features: Beveled Chisel End

B2.63. Cup, Measuring, 2-quart. Eight (8) cups, measuring, 2-quart are required in the FRP Tool Kit. These cups, measuring, 2-quart are used to support the installation of and/or maintenance of the installed FRP mat panel assembly. The cup, measuring, 2-quart, Tap part# 937 or equivalent.

B2.64. Blade, Saw, General Purpose Concrete cutting, 12-in. Three (3) blades, saw, general purpose concrete cutting, 12-in are required in the FRP Tool Kit. These blades, saw, general purpose concrete cutting, 12-in are used cut airfield pavements during the installation of and/or maintenance of the installed FRP mat panel assembly. The blade, saw, general purpose concrete cutting, 12-in, Husqvarna part # 542774462 or equivalent (see B2.64.1.).

B2.64.1. Blade, Saw, General Purpose Concrete cutting, 12-in property.

• Arbor Size: 1-in

• Blade Size: 12-in

• Cured Concrete

B2.65. Blade, Saw, Abrasive, Blue EHS, High Speed, 12-in. Six (6) blades, saw, abrasive, blue EHS, high speed, 12-in are required in the FRP Tool Kit. These blades, saw, abrasive, blue EHS, high speed, 12-in are used cut various materials during the installation of and/or maintenance of the installed FRP mat panel assembly. The blade, saw, abrasive, blue EHS, high speed, 12-in, Husqvarna part# 542751484 or equivalent (see B2.65.1.).

B2.65.1. Blade, saw, abrasive, blue EHS, high speed, 12-in property.

• Arbor Size: 1-in

B-16

• Blade Size: 12-in

• For Metal

B2.66. Ramp. One (1) ramp is required in the FRP Tool Kit. This ramp is used to get the wheeled engine power equipment items in and out of the ISO QuadCon, before, during the installation of and/or maintenance of the installed FRP mat panel assembly. The ramp, Grainger part # 1F145 or equivalent (see B2.66.1.).

B2.66.1. Ramp property.

• Material: Aluminum with diamond-tread surface

• Dimensions: 36-in wide x 18-in long

• Load Capacity (lbs): 700

• Low-Height Walk Ramp: Use to navigate 3 – 5-in high curbs and door thresholds

B2.67. Shears, Banding Cutters, 3/4-in Strap width, 12-in length. One (1) shears, banding cutters, 3/4-in strap width, 12-in length is required in the FRP Tool Kit. This shears, banding cutters, 3/4-in strap width, 12-in length is used various banding materials within the FRP kit, before, during the installation of and/or maintenance of the installed FRP mat panel assembly. The shears, banding cutters, 3/4-in strap width, 12-in length, Grainger part# 5ZW75 or equivalent (see B2.67.1.).

B2.67.1. Shears, banding cutters, 3/4-in strap width, 12-in length property.

• Fit Straps Width: 3/8-in to 3/4-in

• Fits Straps Tensile: 0.015 to 0.031

• Overall Length: 12-in

• Material: Alloy Steel, Black Oxide Finish

• Handle Covering Material: Plastic

• Standards: ISO 9001

B2.68. Fuel Can, Diesel, 5-Gal. One (1) fuel can, diesel, 5-gal is required in the FRP Tool Kit. This fuel can, diesel, 5-gal is used fuel up various diesel powered equipment items within the FRP kit, before, during the installation of and/or maintenance of the installed FRP mat panel assembly. The fuel can, diesel, 5-gal, Scepter part # SCE 05939 or equivalent (see B2.68.1.).

B2.68.1. Fuel can, diesel, 5-gal property.

• Yellow Cap Strap

• Mil-C-53109/CID A-A-59592A

• Accepts pour sprouts Item B2.70.

B2.69. Fuel Can, Gasoline (Mo-Gas) 5-Gal. One (1) fuel can, gasoline (Mo-gas), 5-gal is required in the FRP Tool Kit. This fuel can, gasoline (Mo-gas) 5-gal is used fuel up various gasoline powered equipment items within the FRP kit, before, during the installation of and/or maintenance of the installed FRP mat panel assembly. The fuel can, gasoline (Mo-gas), 5-gal, Scepter part # SCE 5552 or equivalent (see B2.69.1.).

B2.69.1. Fuel can, gasoline (Mo-gas), 5-gal property.

• Red Cap Strap

• Mil-C-53109/CID A-A-59592A

• Accepts pour sprouts Item B2.70.

B2.70. Fuel Can, Spout, 1-in. Two (2) fuel can, spouts, 1-in are required in the FRP Tool Kit. These fuel can, spouts, 1-in are used in the refueling of various diesel and gasoline powered equipment items within the FRP kit, before, during the installation of and/or maintenance of the installed FRP mat panel assembly. The Fuel Can, Spout, 1-in, Scepter part # SCE 04353 or equivalent (see B2.70.1.).

B-17

B2.70.1. Fuel Can, Spout, 1-in property.

• Size: 1-in

• Must be compatible with Items B2.68. and B2.69.

B2.71. Fuel Can, Gasoline (Mo-Gas) 1-Gal. One (1) fuel can, gasoline (Mo-gas), 1-gal is required in the FRP Tool Kit. This fuel can, gasoline (Mo-gas) 1-gal is used mixed two-cycle fuel for the K-12 saw within the FRP kit, before, during the installation of and/or maintenance of the installed FRP mat panel assembly. The fuel can, gasoline (Mo-gas), 1-gal, MSC Direct part # MSC 71336424 or equivalent (see B2.71.1.).

B2.71.1. Fuel can, gasoline (Mo-gas), 1-gal property.

• Color: Red

• Size: 9-1/2-in High x 7-1/2-in Long x 5-in Wide

• Must include pour spout & cap

B2.72. Cone, Traffic, Safety, Orange, 18-in. Four (4) cones, traffic, safety, orange, 18-in are required in the FRP Tool Kit. These cones, traffic, safety, orange, 18-in are used to mark the work zone during the installation of and/or maintenance of the installed FRP mat panel assembly. The cone, traffic, safety, orange, 18-in, MSA10073409 or equivalent (see B2.72.1.).

B2.72.1. Cone, Traffic, Safety, Orange, 18-in property.

• Color: Bright Orange

• Height: 18-in

• Material: Polyethylene

• Weight: 1.5-lb

B2.73. Paddle, Mixing, Grout, 1/2-in Drive, 22-in Long. Two (2) paddles, mixing, grout, 1/2-in drive, 22-in long are required in the FRP Tool Kit. These paddles, mixing, grout, 1/2-in drive, 22-in long are used to mix the grout and water during the installation of and/or maintenance of the installed FRP mat panel assembly. The paddle, mixing, grout, 1/2-in drive, 22-in long, MSA10073409 or equivalent (see B2.73.1.).

B2.73.1. Paddle, mixing, grout, 1/2-in drive, 22-in long property.

• Shaft Dia.: 3/8-in

• Length: 22-in

• Head Dia.: 5-in

• Head Type: Paddle

• Construction: Chrome Plated Steel

• For Use With: Fits Standard 1/2-in or 3/8-in Drill Chuck

B2.74. Brush, Whisk, 7-14/-in Wide. Two (2) brushes, whisk, 7-14/-in wide, are required in the FRP Tool Kit.

These brushes, whisk, 7-14/-in wide, are used to sweep/which up any small debris from around the holes drilled into the airfield pavement during the installation of and/or maintenance of the installed FRP mat panel assembly. The brush, whisk, 7-14/-in wide, Quickie part # 424RM-16 or equivalent (see B2.74.1.).

B2.74.1. Brush, whisk, 7-14/-in wide property.

• Sweeping Width: 7-1/4-in

• Corn Whisk

• Two (2) Rows of Reinforced Nylon Stitching

B2.75. Wrench, Torque, 1/2-in Drive, 20-150 ft-lbs. Two (2) wrenches, torque, 1/2-in drive, 20-150 ft-lbs., are required in the FRP Tool Kit. These wrenches, torque, 1/2-in drive, 20-150 ft-lbs., are used to torque the joining bushing and anchors during the installation of and/or maintenance of the installed FRP mat panel assembly. The wrench, torque, 1/2-in drive, 20-150 ft-lbs., Professional part # 75150 or equivalent (see B2.75.1.).

B-18

B2.75.1. Wrench, Torque, 1/2-in Drive, 20-150 ft-lbs. property.

• Drive Size: 1/2-in

• Adjustable Range: 20 – 150 ft-lbs.

• Locking Collar

• Dimensions: 24.2-in x 2.8-in x 2.2-in

• Standards: ASME B107.41 & ISO 6789

• Must include a case

B2.76. Mobile Tool Chest, 7 Drawer. One (1) mobile tool chest, 7 drawers, is required in the FRP Tool Kit. This mobile tool chest, 7 drawers, is used store/secure various small hand tools and consumables during the installation of and/or maintenance of the installed FRP mat panel assembly. The mobile tool chest, 7 drawers, GT Line part# 489- 800 or equivalent (see B2.76.1.).

B2.76.1. Mobile Tool Chest, 7 Drawer property.

• Material: Injection molded copolymer PP

• 2 Handles

• Removable tray in the upper compartment

• Has six (6) 1.2-in deep drawers & one (1) 2.3-in drawer

• Dimensions: 22-7/8-in L x 15-in W x 17-5/16-in D

• Color: Black

• All drawers/trays will have foam cuts inserted

B2.77. Foam, Packaging, 1-in thick. Seven (7) pieces of foam, packaging, 1-in thick, are required in the FRP Tool Kit. These pieces of foam, packaging, 1-in thick, are used store/secure various small hand tools and consumables within the drawers of the mobile tool chest during the installation of and/or maintenance of the installed FRP mat…