Attachment_D_-_Down_and_Under_Prime_Mover_Compliance_Matrix.xlsx
XLSX spreadsheet 24 KB Posted
- Solicitation number
- FQ19106LTR
About this file
Attachment D - Down and Under Prime Mover Compliance Matrix
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| FQ19106/LTR DOWN AND UNDER PRIME MOVER COMPLIANCE MATRIX | ||||
| Offeror: | ATTACHMENT D | |||
| Date: | ||||
| Technical Specifications Section | Requirement | Compliance Y/N/NA *Does your proposal meet the Specifications detailed in the Technical Specifications* | Notes | |
| 2.1 | General Description | The proposal shall include a layout and arrangement drawing showing all major equipment, including but not limited to: Cab, Engine, Transmission, Electrical system, crane, lighting system. A description of each major subsystem of the unit, and a list of the make and model of all major components. | ||
| 2.3.1 | Weight | The proposal shall demonstrate that the vehicle meets clearance and weight requirements in section 2.3.1. (which refers to section 12, Figure 12.1-1.) The proposal shall include data/calculations used to prepare the proposal. | ||
| 2.4.1 | Traction | The proposal shall demonstrate that the vehicle meets traction requirements in section 2.4.1. The proposal shall include data/calculations used to prepare the proposal. | ||
| 2.4.3 | Braking | The proposal shall demonstrate that the vehicle meets braking requirements in section 2.4.3. The proposal shall include data/calculations used to prepare the proposal. | ||
| 2.5 | Weight | The proposal shall include the axle loads and imbalance within the limits specified in Section 2.5. | ||
| 2.9 | Basic Dimensions | The vehicle shall meet the specified dimensions referenced in section 2.9 to fit in the dimensions of WMATA’s Track System as defined in section 2.9. | ||
| 2.1 | Clearances | The vehicle shall be capable of clearing all of WMATA’s tracks, tunnels and structures as shown under section 12 appendices section 12.2 clearances in Figures titled "dynamic outline" and "underfloor car clearance" | ||
| 3.3.1.1 | Design and Layout | Cab for operator and 4 personnel | ||
| 3.3.1.1 | Design and Layout | Two bogies, two axles each; all powered | ||
| 3.3.1.1 | Design and Layout | Stand-alone diesel powered AC generator set | ||
| 5.4 | Frame | The frame and members of the vehicle shall meet the strength requirements contained in Section 5.4 A frame loading diagram of structural members including material type and thicknesses shall be submitted with the proposal. | ||
| 5.5 | Bogies | The vehicle shall meet the suspension requirements in section 5.5.1. | ||
| Wheels shall be 30-33 inch; AAR per section 5.5.4. | ||||
| Axles shall be - solid; conform to AAR M-101 and AAR Grade C per section 5.5.5. | ||||
| Wheel Axle Assemblies shall conform to AAR M-107, have a back-to-back measurement of 53"-53 3/32" per section 5.5.6. | ||||
| Bearings shall be L-10 mile and comply with all requirements of section 5.5.7. | ||||
| 5.6 | Brakes | The brakes shall comply with all of the requirements of Section 5.6. Parking brake shall be spring applied and hold on a 6% grade per section 5.6.3. | ||
| Service brakes shall provide a deceleration of a least 3.0 mph/s per section 5.6.2. | ||||
| 5.7 | Drivetrain | Transmission shall be an engine drive torque converter and shifting shall be fully automatic. | ||
| A creep function shall be provided in work mode and limited to maximum 5 mph per section 5.7.3 | ||||
| At least one power take-off (PTO) SAE "C" mount shall be provided. | ||||
| 5.8 | Engine | The diesel engine shall meet the design requirements in Section 5.8 and the traction requirements in Section 2.4.1. | ||
| 5.9 | Exhaust | The exhaust system shall meet the material and emissions design requirements in Section 5.9. | ||
| 5.11 | Hydraulic | The hydraulic system shall meet the requirements in Section 5.11. | ||
| 5.12 | Pneumatic | The vehicle shall have an in-line, gear driven, engine mounted compressor capable of at least 32 CFM at 90 psi at 1,250 rpm, engine idle. | ||
| The vehicle shall have at least 42-gallon reservoirs capacity conforming to SAE J10-B specifications. | ||||
| 5.13 | DC Electrical | The DC electrical system shall meet the requirements in Section 5.13.1 and the batteries shall meet the requirements in Section 5.13.2. | ||
| 5.14 | AC Electrical | The AC electrical system shall include an AC Generator that meets the requirements for power, voltage, frequency and noise in Section 5.14.2. | ||
| 5.15 | Down and Under Inspection Crane | The down under crane shall meet the requirements per sections 5.15.1. Offerors shall give the make and model number in their proposals. | ||
| The down under crane, when stowed, will fall within the clearance requirements in Figure titled "dynamic outline" under section 12.2 clearance. | ||||
| The down under crane shall have work platforms which meet the requirements of section 5.15.2. | ||||
| The down under crane shall have safety devices which meet the requirements of section 5.15.3. | ||||
| The down under crane shall have controls which meet the requirements of section 5.15.4. | ||||
| The down under crane shall have suspension lockout which meets the requirements of section 5.15.6. | ||||
| 5.16 | Operating Cab | The operating cab shall meet the requirements in Section 5.16. | ||
| 5.17 | Communications and Emergency Stop Stations | The operating stations shall have the two-way communications capability with buzzer per the requirement in Section 5.17. | ||
| 5.19 | Video System | The Video system shall have cameras meeting the requiremetns of 5.19.2, a monitor per 5.19.3, and a recorder per 5.19.1. | ||
| 5.20 | VMDS | The VMDS shall have record the signals listed in 5.20.2, and storage per 5.20.3. |
image1.jpeg
File details come from the government source that posted it.