Attachment_C_-_Drain_Cleaner_Compliance_Matrix.xlsx
XLSX spreadsheet 24 KB Posted
- Solicitation number
- FQ19106LTR
About this file
Attachment C - Drain Cleaner Compliance Matrix
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| FQ19106/LTR DRAIN CLEANER PRIME MOVER COMPLIANCE MATRIX | ||||
| Offeror: | ATTACHMENT C | |||
| Date: | ||||
| Technical Specifications Section | Requirement | Compliance Y/N/NA *Does your proposal meet the Specifications detailed in the Technical Specifications* | Notes | |
| 2.1 | General Description | The proposal shall include a layout and arrangement drawing showing all major equipment, including but not limited to: Cab, Engine, Transmission, Electrical system, crane, lighting system. A description of each major subsystem of the unit, and a list of the make and model of all major components. | ||
| 2.3.1 | Weight | The proposal shall demonstrate that the vehicle meets clearance and weight requirements in section 2.3.1. (which refers to section 12, Figure 12.1.1.) The proposal shall include data/calculations used to prepare the proposal. | ||
| 2.4.1 | Traction | The proposal shall demonstrate that the vehicle meets traction requirements in section 2.4.1. The proposal shall include data/calculations used to prepare the proposal. | ||
| 2.4.3 | Braking | The proposal shall demonstrate that the vehicle meets braking requirements in section 2.4.3. The proposal shall include data/calculations used to prepare the proposal. | ||
| 2.5 | Weight | The proposal shall include the axle loads and imbalance within the limits specified in Section 2.5. | ||
| 2.9 | Basic Dimensions | The vehicle shall meet the specified dimensions referenced in section 2.9 to fit in the dimensions of WMATA’s Track System as defined in section 2.9. | ||
| 2.1 | Clearances | The vehicle shall be capable of clearing all of WMATA’s tracks, tunnels and structures as shown in Figures 12.2.1, 12.2.2. | ||
| 3.3.1.1 | Design and Layout | Cab for operator and 4 personnel | ||
| 3.3.1.1 | Design and Layout | Two bogies, two axles each; all powered | ||
| 3.3.1.1 | Design and Layout | Drain Cleaner equipment | ||
| 3.3.1.1 | Design and Layout | Stand-alone diesel powered AC generator set | ||
| 5.4 | Frame | The frame and members of the vehicle shall meet the strength requirements contained in Section 5.4 A frame loading diagram of structural members including material type and thicknesses shall be submitted with the proposal. | ||
| 5.5 | Bogies | The vehicle shall meet the suspension requirements in section 5.5.1. | ||
| Wheels shall be 30-33 inch; AAR per section 5.5.4. | ||||
| Axles shall be - solid; conform to AAR M-101 and AAR Grade C per section 5.5.5. | ||||
| Wheel Axle Assemblies shall conform to AAR M-107, have a back-to-back measurement of 53"-53 3/32" per section 5.5.6. | ||||
| Bearings shall be L-10 mile and comply with all requirements of section 5.5.7. | ||||
| 5.6 | Brakes | The brakes shall comply with all of the requirements of Section 5.6. Parking brake shall be spring applied and hold on a 6% grade per section 5.6.3. | ||
| Service brakes shall provide a deceleration of a least 3.0 mph/s per section 5.6.2. | ||||
| 5.7 | Drivetrain | Transmission shall be an engine drive torque converter and shifting shall be fully automatic. | ||
| A creep function shall be provided in work mode and limited to maximum 5 mph per section 5.7.3 | ||||
| At least one power take-off (PTO) SAE "C" mount shall be provided. | ||||
| 5.8 | Engine | The diesel engine shall meet the design requirements in Section 5.8 and the traction requirements in Section 2.4.1. | ||
| 5.9 | Exhaust | The exhaust system shall meet the material and emissions design requirements in Section 5.9. | ||
| 5.11 | Hydraulic | The hydraulic system shall meet the requirements in Section 5.11. | ||
| 5.12 | Pneumatic | The vehicle shall have an in-line, gear driven, engine mounted compressor capable of at least 32 CFM at 90 psi at 1,250 rpm, engine idle. | ||
| The vehicle shall have at least 42-gallon reservoirs capacity conforming to SAE J10-B specifications. | ||||
| 5.13 | DC Electrical | The DC electrical system shall meet the requirements in Section 5.13.1 and the batteries shall meet the requirements in Section 5.13.2. | ||
| 5.14 | AC Electrical | The AC electrical system shall include an AC Generator that meets the requirements for power, voltage, frequency and noise in Section 5.14.2. | ||
| 5.15 | Drain Cleaner Equipment | The vacuum meet the requirements per sections 5.15.1 and 5.15.6. Offerors shall give the make and model number in their proposals. | ||
| The debris body shall meet the capacity and material requirements in Section 5.15.2. | ||||
| The hoist shall meet the 56,000 lb. capacity requirements of section 5.15.2. | ||||
| The watter tanks shall have 1,000 gallon capacity and meet the requirements of section 5.15.4. | ||||
| The water pumps shall meet the 2,000 psi at 80 gpm requirements of section 5.15.5. | ||||
| The boom shall have the capacity, swing, extension and hose size to meet the requirements of section 5.15.7. | ||||
| 5.16 | Operating Cab | The operating cab shall meet the requirements in Section 5.16. | ||
| 5.17 | Communications and Emergency Stop Stations | The operating stations shall have the two-way communications capability with buzzer per the requirement in Section 5.17. | ||
| 5.19 | Video System | The Video system shall have cameras meeting the requiremetns of 5.19.2, a monitor per 5.19.3, and a recorder per 5.19.1. | ||
| 5.20 | VMDS | The VMDS shall have record the signals listed in 5.20.2, and storage per 5.20.3. |
image1.jpeg
File details come from the government source that posted it.