Form 807.pdf
PDF 83 KB Posted
- Attached to
- F-16 Electrical Limiter
- Solicitation number
- FA821225R0005
About this file
This AFMC Form 807 details recommended quality assurance provisions and special inspection requirements for an F-16 Electrical Limiter with National Stock Number 5895015158924WF. The document specifies that inspection must be accomplished at the source due to significant technical requirements for manufacturing, repair, and testing of this critical F-16 component. Quality assurance provisions include standard inspection requirements under FAR 52.246-2 through 52.246-6, with the technical authority from 416 SCMS/GUMAD noting that quality provisions cannot be downgraded without coordination.
The form indicates the item manager is Stefani Peterson and the equipment specification contact is Timothy L. Nichols, both with contact numbers at Hill Air Force Base. A key note confirms that the requirement does not necessitate the use of Class I Ozone Depleting Substances. The technical authority signed the document on 08 MAR 2023, and the form was generated on 06 MAR 2025, suggesting this is part of a future procurement process for a critical F-16 electrical component.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Form 260 - FA.pdf | ||
| IUID.pdf | ||
| Manufacturing Qualification Requirements-Section C.pdf | ||
| CDRL A001 - CPP.pdf | ||
| Transportation Data.pdf | ||
| Engineering Data Requirements.docx | DOCX document | |
| FA821225R0005.pdf | ||
| Engnieering Data List.pdf | ||
| CDRL B001 - FA Test Report.pdf | ||
| Item Description.pdf | ||
| Packaging Requirements.pdf |
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RECOMMENDED QUALITY ASSURANCE PROVISIONS
AND SPECIAL INSPECTION REQUIREMENTS
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
5895015158924WF
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Peterson, Stefani / 801-586-4371
6. EQUIPMENT SPEC / PHONE
Nichols, Timothy L / 801-775-4608
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
X STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Refahiyat, JoeNAME: 01 NOV 2010DATE:
Inspection must be accomplished at the source due to significant technical requirements for the manufacture, repair, and test of this item which is part of critical item on the F16.
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCENO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
C
11. SIGNATURE OF TECHNICAL AUTHORITY
Nichols, Timothy L
ORGANIZATION / SYMBOL
416 SCMS / GUMAD
PHONE
801-775-4608 / 775-4608
DATE
08 MAR 2023
Page 1 of 1AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 06 Mar 2025
File details come from the government source that posted it. Updated .