Foreign Disclosure Review.pdf
PDF 242 KB Posted
- Attached to
- A-10 Wing Panel
- Solicitation number
- FA8212-21-Q-0029
About this file
This memorandum from the Department of the Air Force provides guidance on the release of technical data for an upcoming solicitation seeking A-10 wing panels. The memorandum approves the release of unclassified production data to 21 listed countries including key NATO allies. It also notes that one line item involves critical technology and its release is approved only for U.S. contractors. Additionally, the memorandum specifies that the foreign disclosure review will be completed when Form 191 and the technical data are submitted to the approval authority.
The related federal contract opportunity notice announces a small business set-aside solicitation for seven national stock numbers of A-10 wing panels. Interested contractors must submit a source approval request, and award will only be made to approved qualified sources. The anticipated award date is August 31, 2021, and foreign participation is prohibited. The procuring agency is the Department of the Air Force Materiel Command Air Force Sustainment Center.
View the file
Other files
Show all 24
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
AIR FORCE LIFE CYCLE MANAGEMENT CENTER
HILL AIR FORCE BASE UTAH
THIS DISCLOSURE INFORMATION IS NOT RELEASABLE TO FOREIGN
NATIONALS OR THEIR REPRESENTATIVES
May 18, 2021
MEMORANDUM FOR: 429 SCMS/GUMACB
CONTRACTING OFFICER
FROM: AFLCMC/WFNH
SUBJECT: FOREIGN DISCLOSURE REVIEW, Purchase Request # FD20202100809
1. Approved for release of Unclassified Production Data to the following countries:
Australia, Austria, Belgium, Canada, Denmark, Egypt, Germany, Finland, France, Greece, Israel, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, Turkey and United Kingdom.
2. x Critical technology involved, export controlled block checked “YES”, release approved for U.S. contractors only.
3. x AMSC C: This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant government engineering activity.
4. x The award of a government contract does not negate the contractor’s responsibility to comply with export control requirements under the Arms Export Control Act (Department of State) or the Export Administration Regulations (Department of Commerce).
5. This PR is NOT Critical Technology and is releasable to the above listed Countries.
6. x Item is: PANEL,STRUCTURAL,AI used on the A-10.
7. x The FDO Review will be completed when the AFMC Form 191 is submitted to the FDO along with the Technical Data to be released to a Foreign Country identified in MN #1.
8. x The Contractor shall include the substance of DFAR 252.225-7048 Export-Controlled Items clause, including paragraph (e), in all subcontracts.
//Signed//
Jason Slaughter Foreign Disclosure Officer
AFLCMC/WFNH
Hill AFB, Utah
| May 18, 2021 |
| MEMORANDUM FOR: 429 SCMS/GUMACB |
| CONTRACTING OFFICER |
| FROM: AFLCMC/WFNH |
| 1. Approved for release of Unclassified Production Data to the following countries: Australia, Austria, Belgium, Canada, Denmark, Egypt, Germany, Finland, France, Greece, Israel, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Sw... |
| 2. x Critical technology involved, export controlled block checked “YES”, release approved for U.S. contractors only. |
| 3. x AMSC C: This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(... |
| 4. x The award of a government contract does not negate the contractor’s responsibility to comply with export control requirements under the Arms Export Control Act (Department of State) or the Export Administration Regulations (Department of Comme... |
| 5. This PR is NOT Critical Technology and is releasable to the above listed Countries. |
| 6. x Item is: PANEL,STRUCTURAL,AI used on the A-10. |
| 7. x The FDO Review will be completed when the AFMC Form 191 is submitted to the FDO along with the Technical Data to be released to a Foreign Country identified in MN #1. |
| 8. x The Contractor shall include the substance of DFAR 252.225-7048 Export-Controlled Items clause, including paragraph (e), in all subcontracts. |
| //Signed// |
| Jason Slaughter |
| 2021-05-18T13:04:16-0600 | |
| SLAUGHTER.JASON.VERN.1047421817 |
File details come from the government source that posted it. Updated .