FMU167SPI.pdf
PDF 162 KB Posted
- Attached to
- Hard Target Void Sensing Fuze (HTVSF) FMU-167 Federal contract opportunity
- Solicitation number
- FA8213-22-R-3011
About this file
This document contains a solicitation for a Hard Target Void Sensing Fuze (HTVSF) FMU-167 as well as notes on packaging and transport requirements. The solicitation seeks proposals for HTVSF FMU-167 and was issued by the Department of the Air Force Materiel Command Lifecycle Management Center at Hill Air Force Base. Offerors will be directly sent additional attachments related to the solicitation. The provided notes specify that any wood packaging materials used must be debarked and heat treated to 56 degrees Celsius for 30 minutes to comply with international standards for phytosanitary measures aimed at preventing the spread of invasive species such as pinewood nematodes. Certification from an accredited agency recognized by the American Lumber Standards Committee is required.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA821322R3011_______0004.pdf | ||
| FA821322R3011_______0003.pdf | ||
| FA821322R3011_______0002.pdf | ||
| FA821322R3011_______0001.pdf | ||
| ES7035.pdf | ||
| WARP.pdf | ||
| REPSHIP.pdf | ||
| ES7034.pdf | ||
| FA821322R3011.pdf | ||
| ExhibitBCDRLs.pdf | ||
| ES7650.pdf | ||
| DD254ContractSecurityClassificationSpecification.pdf | ||
| GFP.pdf | ||
| ExhibitCCDRLs.pdf | ||
| ES6200ADC.pdf |
Show all 15
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
MUNITION NOTICES
NOTES
1. PLACE FUZE, BOMB AND COMPONENTS INTO CNU-742/E CONTAINER, AS SHOWN ON DRAWING, PAGE 3, ENSURE THAT
FZU CABLES ARE NOT KINKED DURING PACKAGING.
2. PLACE DESICCANT, REF.-1, AND HUMIDITY INDICATOR, REF.-2, IN FOAM TRAY, AS SHOWN ON DRAWING, PAGE 3.
3. CLOSE CONTAINER, AND SEAL WITH REF.-3.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .