First_Article_Qualification.pdf
PDF 20 KB Posted
- Attached to
- SEAL, AlR, AIRCRAFT G
- Solicitation number
- FA8121-26-R-0014
About this file
This is a Data Item Description (DID) template that establishes the format and content requirements for a First Article Qualification Test Plan and Procedures document. The DID, numbered DI-NDTI-81307A and approved on 21 November 2006, is maintained by the Naval Sea Systems Command (NS/I522) and supersedes the previous version DI-NDTI-81307.
The First Article Qualification Test Plan must be submitted in the contractor's format and shall include: (1) the purpose of the test; (2) applicable reference documents; (3) a description of units to be tested; (4) detailed test descriptions containing step-by-step procedures for operators, definitions of readings and settings, descriptions of test equipment with commercial identification, and drawings or schematics of any noncommercial fixtures and testers; and (5) inspection criteria defining the minimum performance requirements for Government acceptance, including worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs. This template is used when first article qualification testing is specified as a discrete task requirement within a contract.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA8121-26-R-0014 0001.pdf | ||
| 4340110_TRNSPDATA_REPORT.pdf | ||
| Test_Inspection_Report.pdf | ||
| 4289508_CDRL1_REPORT.pdf | ||
| FA8121-26-R-0014.pdf | ||
| First_Article_Test_Plans.pdf | ||
| 4337978_PKGRQMT_REPORT.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
| DATA ITEM DESCRIPTION |
| Requirements: |
File details come from the government source that posted it. Updated .