First Article DID.pdf
PDF 20 KB Posted
- Attached to
- LINER, COMBUSTION CH
- Solicitation number
- FA812126R0016
About this file
This is a Data Item Description (DID) document that establishes requirements for a First Article Qualification Test Plan and Procedures.
The DID, numbered DI-NDTI-81307A and approved on November 21, 2006, specifies the format and content requirements for a test plan that contractors must develop to conduct first article qualification testing. The plan must be prepared in the contractor's format and include five primary content sections: the purpose of the test, applicable reference documents, a description of units to be tested, detailed test descriptions, and inspection criteria. The test description section must contain step-by-step operator procedures for each test, definitions of readings to be taken, equipment settings to be used, and descriptions of test equipment with commercial identification. Additionally, contractors must provide drawings, schematics, photographs, or other visual documentation of any noncommercial fixtures and testers necessary for test evaluation. The inspection criteria section must define minimum performance requirements for Government acceptance, including at minimum worst-case prime power input parameters, worst-case signal level and timing inputs, and signal level and timing output specifications. This DID supersedes the previous version, DI-NDTI-81307.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Item Description.pdf | ||
| CDRL1_REPORT.pdf | ||
| First Article Requirements.pdf | ||
| MQR.pdf | ||
| 807.pdf | ||
| IUID.pdf | ||
| 813.pdf | ||
| EDL.pdf | ||
| First Article Test Plan.pdf | ||
| FA812126R0016_Solicitation.pdf | ||
| 4248680_EI.docx | DOCX document | |
| DID.pdf | ||
| Packaging.pdf | ||
| Transportation.pdf |
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
| DATA ITEM DESCRIPTION |
| Requirements: |
File details come from the government source that posted it. Updated .