Vehicle Portable Washer SOO.pdf

PDF 62 KB Posted

Attached to
Vehicle Portable Washer System (Equipment Purchase) – Plant 42
Solicitation number
FA930126Q0021
Issued by

About this file

This is a Statement of Objectives for a 20' x 40' HD Auger Containment Island Above Ground Wash Pad with Closed Loop System. The procurement specifies a complete mobile wash water treatment and recycling facility with integrated solids management capabilities.

The core system (Section A) requires a Waste2Water Solids Management HSMS-800-0 Left Handed Combo System featuring biological remediation with fine bubble aeration, a marine-grade aluminum 1,834-gallon capacity tank, 2,115 square feet of biological media, an integrated inclined plate solids clarifier, chemical injection for solids separation, and an extra 25-micron filter with 47 square feet of filtration area. The system requires 240-volt single-phase electrical service at 80 amps with neutral wire and includes a 48" x 60" shallow drain sump with solids hopper. Supporting equipment includes a Waste2Water High Volume Water Cannon System delivering 26 GPM at 200 PSI (Section B), an ESD cold water pressure washer at 3000 PSI @ 4 GPM with timed shutdown (Section C), and a 20' insulated Conex container housing treatment equipment with 150-amp electrical panel and microbe refrigerator (Section D). The containment pad (Section E) comprises five 20' x 8' HD polymer wash pads with 4-foot splash walls on two sides, an above-ground pump-out sump box with float switch, eight 4' x 8' drive-thru ramps, a parallel path double auger system for material handling, and a solids handling hopper. Additional requirements include installation, startup, training (Section F), freight FOB factory (Section G), facility design drawings (Section H), and complete system piping labor, materials, and final plumbing connections (Section I).

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

STATEMENT OF OBJECTIVES

System Specifications

20' x 40' HD Auger CI Pad with Closed Loop System

A: 1 Each Waste2Water Solids Management HSMS-800-0 Left Handed Combo System

A1: Biological remediation process with fine bubble aeration A2: Marine grade aluminum construction 1,834 Gallon Capacity Tank A3: 1 Each Extra Filter 25 Micron 47 SF A4: 2,115 Sq. Feet of Biological Media A5: Electrical Requirements: 240 Volt, Single Phase, 80 Amps with a Neutral Wire A6: Integrated Inclined Plate Solids Clarifier A7: Includes Chemical Injection for Solids Separation A8: Includes 48" x 60" Shallow Drain Sump with Solids Hopper

B: 1 Each Waste2Water High Volume Water Cannon System-

B1: 26 GPM @ 200 PSI High Volume Wash System B2: Includes Gun Wand and 50' of Hose B3: Includes (1) Remote Hose Station with On/Off Remote Controls

C: 1 Each ESD Cold Water Pressure Washer-

C1: Cold Water Pressure Washer

C2: 3000 PSI @ 4 GPM

C3: Timed Shutdown and Pre-wired for Remote On/Off Control C4: Includes (1) Remote Hose Station with Hose, Gun, and Wand

D: 1 Each 20' Insulated Conex Container-

D1: Includes 20' Insulated, lights, and heater for Wash Water Treatment Equipment - Recessed Mandoor/ Handle D2: Electrical 150 AMP panel pre-wired for plug and play use D3: Includes Microbe Refrigerator

E: 1 Each ESD 20' x 40' HD Auger Containment Island Above Ground Wash Pad-

E1: (5) Each 20' x 8' HD rugged polymer construction wash pad E2: Includes 4' Tall Splash Walls on (2) sides

Includes Above Ground Pump Out Sump Box and Float Switch

E3: (8) 4' x 8' Ramps for Drive Thru Capability E4: 1 Each Parallel Path Double Auger Systems for Material Handling E5: 1 Each Solids Handling Hopper

F: Provide Installation/Start Up/Training

G: Freight F.O.B. Factory

H: Provide facility design drawings

I: Include system piping labor, materials and final plumbing connections.

File details come from the government source that posted it. Updated .