Attachment 1 - Miller ProHeat 35 Specification.pdf

PDF 163 KB Posted

Attached to
Combined Synopsis/Solicitation - Miller ProHeat 35 Federal contract opportunity
Solicitation number
FA910122QB056
Issued by
Department of the Air Force Materiel Command Test Center

View the file

Other files for this federal contract opportunity

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Miller ProHeat 35 Induction Heating System Specifications

Provide One Miller ProHeat 35 that meets the following specifications:

• The system shall have a temperature based control with a preheat cycle, bake out cycle and post weld heat treat (PWHT) cycle.

• The system shall have a customizable program function that can be operated manually if necessary.

• The system shall be able to operate at these voltages 460-575.

• The system shall have 140 foot liquid cooled heating cables.

• The system shall have induction cooler.

• The system shall have running gear.

• The system shall have two temperature sensors.

• The system shall have high temperature rope (2 each 50 foot Rolls).

• The system shall have 25 foot output cables and 25 foot extension cables.

• The system shall have a minimum of 3 thermocouple receptacles and a four thermocouple extension cables.

• The contractor shall provide 2 each 80 foot cable preheat covers.

• The new unit must be compatible with the shop’s existing Miller ProHeat 35.

• A standard warranty shall be included.

File details come from the government source that posted it. Updated .