Attachment_2_-_DD254.pdf

CLASSIFICATION (When filled in):

PREVIOUS EDITION IS OBSOLETE. Page 1 of 3 AEM LiveCycle Designer

PREVIOUS EDITION IS OBSOLETE. Page 1 of 3 AEM LiveCycle Designer

DD DD FFOORMRM 252544,, APR 2018

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

(The requirements of the National Industrial Security Program (NISP) apply to all security aspects of this effort involving classified information.)

OMB No. 0704-0567 OMB approval expires:

October 31, 2020

The public reporting burden for this collection of information, 0704-0567, is estimated to average 70 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-information-collections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

RETURN COMPLETED FORM AS DIRECTED IN THE INSTRUCTIONS.

1. CLEARANCE AND SAFEGUARDING

a. LEVEL OF FACILITY SECURITY CLEARANCE (FCL) REQUIRED (See Instructions)

b. LEVEL OF SAFEGUARDING FOR CLASSIFIED INFORMATION/

MATERIAL REQUIRED AT CONTRACTOR FACILITY

2. THIS SPECIFICATION IS FOR: (X and complete as applicable.)

a. PRIME CONTRACT NUMBER (See instructions.)

b. SUBCONTRACT NUMBER

c. SOLICITATION OR OTHER NUMBER DUE DATE (YYYYMMDD)

3. THIS SPECIFICATION IS: (X and complete as applicable.)

a. ORIGINAL (Complete date in all cases.)

DATE (YYYYMMDD)

b. REVISED (Supersedes all previous specifications.)

REVISION NO. DATE (YYYYMMDD)

c. FINAL (Complete Item 5 in all cases.) DATE (YYYYMMDD)

4. IS THIS A FOLLOW-ON CONTRACT? No Yes If yes, complete the following:

Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract.

5. IS THIS A FINAL DD FORM 254? No Yes If yes, complete the following:

In response to the contractor's request dated , retention of the classified material is authorized for the period of:

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional)

7. SUBCONTRACTOR(S)

(-- but will still require a separate DD Form 254 issued by a prime contractor to each subcontractor.)

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional)

8. ACTUAL PERFORMANCE

a. LOCATION(S) (For actual performance, see instructions.) b. CAGE CODE (If applicable, see Instructions.)

c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional)

9. GENERAL UNCLASSIFIED DESCRIPTION OF THIS PROCUREMENT

(Additional Performance Locations are located in block 13)

Unclassified

Unclassified

Secret Secret

✘ FA8818-19-R-0001

2019/02/25

1 2019/07/17

CONTRACTOR

LOCATION

Orbital Services Program-4 (OSP-4) provides flexible small launch capability using Spacelift System (SS) designs based on commercial and/or Government Furnished Property (GFP) motors to meet the customer requirements. The contract supports payloads ranging between 400 lb to low earth orbit (LEO) to approx. 8,000 lb to geostationary transfer orbit (GTO). A key cornerstone of OSP-4's strategy is to utilize a low barrier to entry to establish a large vendor pool consisting of both large and small businesses. Each mission task order will be competively competed and tailored to customer requirements.

PREVIOUS EDITION IS OBSOLETE. Page 2 of 3 AEM LiveCycle Designer

PREVIOUS EDITION IS OBSOLETE. Page 2 of 3 AEM LiveCycle Designer

DD DD FFOORMRM 252544,, APR 2018

10. CONTRACTOR WILL REQUIRE ACCESS TO: (X all that apply. Provide details in Blocks 13 or 14 as set forth in the instructions.)

a. COMMUNICATIONS SECURITY (COMSEC) INFORMATION f. SPECIAL ACCESS PROGRAM (SAP) INFORMATION

b. RESTRICTED DATA

g. NORTH ATLANTIC TREATY ORGANIZATION

(NATO) INFORMATION

c. CRITICAL NUCLEAR WEAPON DESIGN INFORMATION (CNWDI) (If CNWDI applies, RESTRICTED DATA must also be marked.)

h. FOREIGN GOVERMENT INFORMATION

d. FORMERLY RESTRICTED DATA

i. ALTERNATIVE COMPENSATORY CONTROL MEASURES

(ACCM) INFORMATION

e. NATIONAL INTELLIGENCE INFORMATION:

(1) Sensitive Compartmented Information (SCI)

(2) Non-SCI

j. CONTROLLED UNCLASSIFIED INFORMATION (CUI) (See instructions.)

k. OTHER (Specify) (See instructions.)

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.)

a. HAVE ACCESS TO CLASSIFIED INFORMATION ONLY AT

ANOTHER CONTRACTOR'S FACILITY OR A GOVERNMENT

ACTIVITY

(Applicable only if there is no access or storage required at contractor facility.

See instructions.)

b. RECEIVE AND STORE CLASSIFIED DOCUMENTS ONLY

c. RECEIVE, STORE, AND GENERATE CLASSIFIED

INFORMATION OR MATERIAL

d. FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE

e. PERFORM SERVICES ONLY

f. HAVE ACCESS TO U.S. CLASSIFIED INFORMATION OUTSIDE

THE U.S.,PUERTO RICO, U.S. POSSESSIONS AND TRUST

TERRITORIES

g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE

TECHNICAL INFORMATION CENTER (DTIC) OR OTHER

SECONDARY DISTRIBUTION CENTER

h. REQUIRE A COMSEC ACCOUNT

i. HAVE A TEMPEST REQUIREMENT

j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS

k. BE AUTHORIZED TO USE DEFENSE COURIER SERVICE

l. RECEIVE, STORE, OR GENERATE CONTROLLED UNCLASSIFIED

INFORMATION (CUI).

(DoD Components: refer to DoDM 5200.01, Volume 4 only for specific CUI protection requirements. Non-DoD Components: see instructions.)

m. OTHER (Specify) (See instructions.)

12. PUBLIC RELEASE

Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the National Industrial Security Program Operating Manual (NISPOM) or unless it has been approved for public release by appropriate U.S. Government authority.

Proposed public releases shall be submitted for review and approval prior to release to the appropriate government approval authority identified here with at least office and phone contact information and if available, an e-mail address. (See instructions)

DIRECT THROUGH (Specify below) Public Release Authority:

13. SECURITY GUIDANCE

The security classification guidance for classified information needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract;

and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended.

(Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. See instructions for additional guidance.)

List of Attachments (All Files Must be Attached Prior to Signing, i.e., for any digital signature on the form)

Program Protection Plans (PPP) and Security Classification Guides (SCG): The contractors shall protect critical program information (CPI) and critical components (CC) in compliance with the Program Protection Plan (PPP). Program Security Classification Guides (SCGs) will be provided by the Government program office. Classified national security information, and unclassified controlled information (CUI) shall be protected as outlined in the SCG, NISPOM and/or

DODM 5200.01 V1-4.

Research and developmental contractors shall develop a Program Protection Implementation Plan (PPIP) to be approved by the program office. The PPIP shall describe the protection measures being implemented by the contractor and sub-contractors for CPI and CC. The prime contractor shall flow-down to any

SEE SECTION 13 CONTINUATION SECTION AT THE BOTTOM OF THIS FORM

Unclassified

Unclassified

SEE SECTION 13 CONTINUATION SECTION AT THE BOTTOM OF THIS

FORM

PREVIOUS EDITION IS OBSOLETE. Page 3 of 3 AEM LiveCycle Designer

PREVIOUS EDITION IS OBSOLETE. Page 3 of 3 AEM LiveCycle Designer

DD DD FFOORMRM 252544,, APR 2018

NAME & TITLE OF REVIEWING OFFICIAL SIGNATURE

14. ADDITIONAL SECURITY REQUIREMENTS

Requirements, in addition to NISPOM requirements for classified information, are established for this contract.

No Yes If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the CSO. (See instructions for additional guidance.)

15. INSPECTIONS

Elements of this contract are outside the inspection responsibility of the CSO.

No Yes If Yes, explain and identify specific areas and government activity responsible for inspections. (See instructions for additional guidance.)

16. GOVERNMENT CONTRACTING ACTIVITY (GCA) AND POINT OF CONTACT (POC)

a. GCA NAME

b. ACTIVITY ADDRESS CODE (AAC) OF THE CONTRACTING OFFICE (See Instructions)

c. ADDRESS (Include ZIP Code) d. POC NAME

e. POC TELEPHONE (Include Area Code)

f. EMAIL ADDRESS (See Instructions)

17. CERTIFICATION AND SIGNATURES

Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.

a. TYPED NAME OF CERTIFYING OFFICIAL (Last, First, Middle Initial) (See Instructions)

b. TITLE

c. ADDRESS (Include ZIP Code)

d. AAC OF THE CONTRACTING OFFICE (See Instructions)

e. CAGE CODE OF THE PRIME CONTRACTOR (See Instructions.)

f. TELEPHONE (Include Area Code)

g. EMAIL ADDRESS (See Instructions)

h. SIGNATURE

i. DATE SIGNED (See Instructions)

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL

a. CONTRACTOR

b. SUBCONTRACTOR

c. COGNIZANT SECURITY OFFICE FOR PRIME AND

SUBCONTRACTOR

d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY

ADMINISTRATION

e. ADMINISTRATIVE CONTRACTING OFFICER

f. OTHER AS NECESSARY (If more room is needed, continue in Item 13 or on additional page if necessary.)

Unclassified

Unclassified

Visitor Group Security Agreement (VGSA) is required for locations operating on a government installation. PROGRAM PROTECTION PLANNING: The prime contractor and its subcontractors shall protect Critical Program Information (CPI), Critical Components (CC), technologies and systems when identified in appropriate Program Protection Plans (PPP).

Briggette Brown Security Administration Briggette Brown

For collateral: The Defense Security Service is relieved of security inspection responsibility for contracts on government installations. The Commander retains cognizance over contracts on the installation. SMC/ENX staff is designated as member of the Wing Inspection Team and has inspection authority when assigned under SMC/IG. DoDAAC[FA8818]

SMC/ADK

3548 Aberdeen Ave. SE, Kirtland, AFB, NM, 87117 Lucia Corral

505-853-5873

FA8818 lucia.corral@us.af.mil

FA8802

377abw.ip@us.af.mil; smc.pip.cna@us.af.mil

13. SECURITY GUIDANCE. The security classification guidance needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes: to challenge the guidance or classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended. (Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any document/guides/extracts referenced herein.

Add additional pages as needed to provide complete guidance.

CONTINUATION OF ITEM 13

[Block: 13 Continuation] subcontractor protection requirements for implementation as described in the PPIP in compliance with PPP. The government program office shall conduct Program Protection Surveys at contractor locations to assess the effectiveness of the established PPIP.

Information requiring AF or DoD–level review will be forwarded by the entry-level public affairs office through the MAJCOM/DRU Public Affairs Office to the Secretary of the Air Force, Office of Public Affairs, Security and Review Division (SAF/PAX), 1690 Air Force Pentagon, Washington DC 20330-1690.

Ref 10a: Classified COMSEC material is not releasable to contractor employees who have not received a FINAL clearance at the appropriate security level.

COMSEC access shall be IAW DoD 5220.22-M. Written concurrence of the GCA is required prior to subcontracting. : “Prior approval from the Contracting Officer is required in order for a Prime Contractor to grant COMSEC access to a subcontractor. The Prime Contractor shall also notify the National Security Agency (NSA) Central Office of Record (COR) before negotiating or awarding subcontracts.

(For Visitor Groups) Contractor will require access to COMSEC information at the on-base locations listed in item 8a. On-base contractors will not require their own COMSEC account. Access will be controlled by 61st AirBase Group (ABG) or host installation. On-base contractors will protect COMSEC material IAW directives identified by the installation COMSEC Custodian to include Air Force Manual 17-1302-0, Communications Security (COMSEC) Operations.

Access to COMSEC material by personnel is restricted to U.S. citizens holding final U.S. Government clearances.”

Ref 10b: Restricted Data Information is not releasable to contractor employees who have not received a FINAL clearance at the appropriate security level.

Written concurrence of the GCA is required prior to subcontracting. : “ Protection requirements for RD/FRD/CNWDI are contained in DoDM 5200.01, Volume 1, DoD Information Security Program, which states that: Classified information, including Critical Nuclear Weapon Design Information, in the custody of the Department of Defense marked as RD and FRD in accordance with the Atomic Energy Act of 1954, as amended, shall be stored, protected, and destroyed in the same manner as information of a comparable level of security classification Contractor IT systems and networks must be certified and accredited for RD, FRD, and/or CNWDI prior to transmission, processing, or storage of such data. RD and FRD must be marked IAW instructions in the NISPOM.”

Ref 10d: The contractor is permitted access to Formerly Restricted Data (FRD) in the performance of this contract. Access to FRD requires a final U.S.

Government clearance at the appropriate level. Written concurrence of the GCA is required prior to subcontracting. : “ Protection requirements for RD/FRD/CNWDI are contained in DoDM 5200.01, Volume 1, DoD Information Security Program, which states that: Classified information, including Critical Nuclear Weapon Design Information, in the custody of the Department of Defense marked as RD and FRD in accordance with the Atomic Energy Act of 1954, as amended, shall be stored, protected, and destroyed in the same manner as information of a comparable level of security classification Contractor IT systems and networks must be certified and accredited for RD, FRD, and/or CNWDI prior to transmission, processing, or storage of such data. RD and FRD must be marked IAW instructions in the NISPOM.”

Ref 10e1: SCI Access required. No public release of information authorized, public disclosure or confirmation of any subject related to the support contract is not authorized without first obtaining written approval from the GCA.

Ref 10h: Foreign Government Information (FGI) is not releasable to contractor employees who have not received a FINAL clearance at the appropriate security level. Written concurrence of the GCA is required prior to subcontracting.

Ref 10j: For Official Use Only (FOUO) Information generated and/or provided under this contract shall be safeguarded and marked as specified in DoD Manual 5200.1 Volumes 1-4 . : CUI is the term which includes For Official Use Only, CUI information provided under this contract shall be managed and safeguarded IAW DoDM 5200.01, Volume 4, Controlled Unclassified Information (CUI). See Block 11L for Information Systems protection guidance.

Ref 11c: The contractor requires access to classified information. Any extracts must apply derivative classifications and markings consistent with the source documents. Use of "Multiple Sources" on the "Derived From" line necessitates compliance with the NISPOM, paragraph 4-208b. : Classified material will be handled in accordance with DoDM 5200.01-V1-V3, and the NISPOM.

Ref 11d: Contractor must provide adequate storage at their facility for classified hardware to the level of required safeguarding (See Block 1b above). : The contractor may access information provided by DTIC by complying with all established safeguards and following the registration procedures as set forth in Chapter 11 Section 2 of the NISPOM.

Ref 11g : The contractor may access information provided by DTIC by complying with all established safeguards and following the registration procedures as set forth in Chapter 11 Section 2 of the NISPOM.

Ref 11h: A COMSEC account must be established when accountable COMSEC material is to be provided, acquired, or produced under a contract. The GCA will inform the contractor that a COMSEC account is required. : (On-base contractors) The contractor will be required to establish and maintain a COMSEC user account following the procedures and requirements contained in Committee on National Security Systems (CNSS) Policy No. 3, National Policy for Granting Access to U.S. Classified Cryptographic Information and AFMAN 17-1302-0, Communications Security (COMSEC) Operations, the NISPOM, and installation COMSEC account procedures.

(Off-base contractors) NSA account will be established for and maintained by contractor IAW Committee on National Security Systems (CNSS) Policy No. 3, National Policy for Granting Access to U.S. Classified Cryptographic Information. The Contractor will comply with the additional security requirements and the management of NSA information/ material as defined in the manual.

Ref 11j : The contractor shall accomplish the following minimum requirements in support of the government Operations Security (OPSEC) Program:

a. The contractor shall comply with the User Agency OPSEC Plan, and apply protective measures therein. Research and Development contractors (off-base) shall develop an OPSEC Plan in accordance with DoDM 5205.2 and include OPSEC as a part of their ongoing security awareness program.

b. The contractor shall protect all unclassified information and activities, which could compromise classified information or operations, or degrade the planning and execution of military operations performed by the contractor in support of the mission. Contractor shall protect controlled unclassified information (CUI) and information identified in the SMC and SMC program office critical information list (CIL)

13. SECURITY GUIDANCE. The security classification guidance needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes: to challenge the guidance or classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended. (Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any document/guides/extracts referenced herein.

Add additional pages as needed to provide complete guidance.

CONTINUATION OF ITEM 13

c. Disposition of Critical Information and CUI obtained or produced pursuant to this contract shall be shredded/degaussed to prevent reconstruction.

Ref 11k : The Contractor shall comply with NISPOM for authorized use of Defense Courier Services and obtain Government Contracting Activity (GCA) authorization as required.

[Block: 12] DoDAAC[FA8818] Release Information[“SMC/PA, 483 North Aviation Blvd, El Segundo CA 90245” as the Public Release Authority.”] Location Code/Agency Name/Address[FA8818, FA8818 HQ SMC PK SDK/PKT/ADK FA8818 HQ SMC PK SDK/PKT/ADK, CP 310 653 1748 3550 ABERDEEN AVE SE KIRTLAND AFB NM 87117-0001, KIRTLAND AFB, NM, 87117-0001]