FA875126Q0002 Attachment 9 - Asbestos Lead and PCB Caulk Survey - UT5662CCE B3 Rev1.pdf

Albany ♦ Binghamton ♦ Buffalo ♦ Canton ♦ Elmira ♦ Plattsburgh ♦ Poughkeepsie ♦ Rochester ♦ Syracuse ♦ Watertown

Utica 301 St. Anthony Street

Utica, NY 13501 315-735-3309 (T) atlantictesting.com

ATLANTIC TESTING LABORATORIES

WBE certified company

February 28, 2025

N.K. Bhandari Architecture & Engineering, PC 1020 Seventh North Street, Suite 130 Liverpool, New York 13088

Attn: Daniel Heukrath, AIA, NCARB, LEED AP Practice Leader/ Architecture

Re: Limited Hazardous Materials Survey Multiple Areas Air Force Research Laboratory Building 3 Rome, New York ATL Report No. UT5662CCE-01-02-25

Enclosed is a copy of the Hazardous Materials Survey report prepared for the referenced site.

This project was completed in accordance with the scope of work outlined in our contract (ATL No. UT5998-575-09-24), dated September 6, 2024, and authorized by Christopher R. Resig on October 17, 2024.

Please contact our office should you have any questions, or if we may be of further assistance.

Sincerely, ATLANTIC TESTING LABORATORIES, Limited

Nathan W. Mastenbrook Building Inspector

NWM/JDG/nwm

Enclosures

WBE certified company

LIMITED HAZARDOUS MATERIALS SURVEY

MULTIPLE AREAS AIR FORCE RESEARCH LABORATORY

BUILDING 3

ROME, NEW YORK

PREPARED BY:

Atlantic Testing Laboratories, Limited 301 St. Anthony St

Utica, New York 13502

PREPARED FOR:

N.K. Bhandari Architecture & Engineering, PC 1020 Seventh North Street, Suite 130

Liverpool, New York 13088

ATL REPORT NO. UT5662CCE-01-02-25

February 28, 2025

TABLE OF CONTENTS

1.0 INTRODUCTION

1.1 Purpose

1.2 Project Team and Certifications

2.0 SCOPE OF WORK

2.1 Project Description

2.2 Inaccessible Areas

2.3 Document Review

2.4 Limitations

3.0 ASBESTOS

3.1 Methodology

3.2 Regulatory Compliance

3.3 Summary of Findings

4.0 LEAD-CONTAINING MATERIAL

4.1 Methodology

4.2 Regulatory Compliance

4.3 Summary of Findings

5.0 POLYCHLORINATED BIPHENYLS

5.1 Methodology

5.2 Regulatory Compliance

5.3 Summary of Findings

6.0 CONCLUSIONS AND RECOMMENDATIONS

6.1 General

6.2 Asbestos-Containing Materials

6.3 Lead-Containing Materials

6.4 PCB-Containing Materials

APPENDICES

Licenses and Certifications ........................................................................................................ A Sample Location Plans .............................................................................................................. B Laboratory Reports and Custody Documentation ....................................................................... C Summary Tables ........................................................................................................................ D Summary of XRF Results and Calibration Checks ..................................................................... E Historical Documentation ........................................................................................................... F

Multiple Areas AFRL (Building 3) Rome, New York February 28, 2025

1.0 INTRODUCTION

1.1 Purpose

Atlantic Testing Laboratories, Limited (ATL) was retained by N.K. Bhandari Architecture & Engineering PC, to perform a limited hazardous materials survey of designated areas within Building 3 at the Air Force Research Laboratory (AFRL). The limited survey was performed on multiple dates between November 25 through December 06, 2024. The purpose of this limited hazardous materials survey was to identify asbestos-containing materials (ACM), lead-containing materials, and polychlorinated biphenyls (PCB)-containing caulk that are present on exposed surfaces within the subject areas, and may have a significant impact on planned renovation activities. The hazardous materials survey procedures and report format that follow are in general compliance with applicable local, state, and federal rules and regulations.

1.2 Project Team and Certifications

Members of the ATL project team included Nathan Mastenbrook, Building Inspector and Dylan Putnam, Environmental Specialist. Certifications of ATL's field survey team members and a copy of applicable company licenses maintained by ATL are included in Appendix A.

2.0 SCOPE OF WORK

2.1 Project Description

The project site is located at 26 Electronic Parkway, Rome, Onieda County, New York.

The intent of the limited hazardous materials survey was to identify suspect ACM, Lead- Containing Materials, and PCB-containing caulk that are located within designated areas of building three of the referenced facility and may be impacted during a proposed roof replacement and office refurbishment project.

The limited hazardous materials survey was conducted for the subject areas, as directed by Ronald E. Stafford, representing AFRL. The subject areas were occupied and operational at the time of the sampling event.

2.2 Inaccessible Areas

The extent of inaccessible areas is dependent upon the building type, construction materials, history of renovations and repairs, and project scope. Concealed materials may exist in areas that are not readily exposed to view. Although this limited hazardous materials survey was performed to identify ACM, Lead-containing material, and PCB-containing caulk within the subject areas, potential ACM, Lead-containing material, and/or PCB-containing caulk may have escaped detection that could be encountered during future building demolition and/or renovation activities.

Wall, ceiling, floor, roofing, and/or other component systems may contain concealed suspect ACM, Lead-containing material, and/or PCB-containing caulk. If any suspect ACM, Lead-containing material, and/or PCB-containing caulk are encountered during demolition and/or renovation activities, the activities disturbing the suspect ACM, Lead-containing material, and/or PCB-containing caulk must stop and the material must be sampled and laboratory analyzed in accordance with applicable regulations.

2.3 Document Review

Documents that were provided to ATL for review during the limited asbestos or hazardous materials survey included:

• Lu Engineering Asbestos Survey Report AFRL/RI Main Campus- Building 3, dated December 2020.

2.4 Limitations

This report has been prepared in accordance with the scope of work outlined in ATL’s contract (ATL No. UT5998-575-09-24), dated September 6, 2024, and should not be used as abatement specifications or design documents. The findings, conclusions, and recommendations presented in this report are based on the field observations made by representatives of ATL and the information provided by representatives of N.K. Bhandari Architecture & Engineering, PC.

Quantities and locations of sampled materials are approximate, and should be verified by the abatement contractor(s) prior to providing actual cost quotations and/or initiating abatement activities. Variations in reported quantities and locations for sampled materials, in addition to the discovery of suspect materials not identified in this report, is possible due to the presence of inaccessible areas, as described in Section 2.2 of this report.

The findings and opinions are relevant to the dates of our site work and should not be relied on to represent conditions at substantially later dates.

3.0 ASBESTOS

3.1 Methodology

A visual examination of the designated areas of the subject building was conducted by an Asbestos Building Inspector to identify suspect ACM. Functional spaces were identified to assist while locating suspect ACM. A functional space is defined as a spatially distinct area within a building that contains identifiable populations of building occupants. A functional space may include a room, a group of rooms, or other defined area, and several functional spaces may comprise a single homogeneous sampling area. A homogeneous sampling area is defined as an area that is uniform by color, texture, construction/application, and general appearance. Each identified functional space was visually examined to determine the locations of suspect ACM.

These materials were then delineated into homogeneous sampling areas.

Samples of each accessible homogeneous area were collected and placed in clean, labeled containers. The appropriate custody documentation was completed and the suspect ACM samples were submitted to AmeriSci New York (AmeriSci), located in New York, New York. The samples were laboratory analyzed by polarized light microscopy (PLM) and transmission electron microscopy (TEM) methodologies, as applicable. AmeriSci is a New York State Department of Health (NYSDOH) certified laboratory for PLM and TEM analysis under Environmental Laboratory Approval Program (ELAP) No. 11480. AmeriSci is also accredited by the National Institute of Standards and Technology (NIST), under the National Voluntary Laboratory Accreditation Program (NVLAP).

3.2 Regulatory Compliance

In New York State, there are multiple regulatory agencies that have jurisdiction over ACM in buildings. Asbestos survey requirements are primarily regulated or specified by the New York State Department of Labor (NYSDOL), the New York State Department of Health (NYSDOH), the Occupational Safety and Health Administration (OSHA), and the United States Environmental Protection Agency (EPA).

The NYSDOL established Part 56 of The Official Compilation of Codes, Rules, and Regulations (cited as 12 NYCRR, Part 56) to address the proper identification, handling, removal, and disposal of ACM in buildings. Asbestos survey requirements are specified in Subpart 56-5.1 “Asbestos Survey Requirements for Building/Structure Demolition, Renovation, Remodeling and Repair.”

The NYSDOL also works in conjunction with the NYSDOH to establish and maintain asbestos safety training program requirements, and enforce personnel certifications and licensing protocol for asbestos contractors.

The OSHA defines requirements for asbestos surveys and identification of ACM and presumed asbestos-containing materials (PACM) in 29 CFR 1926.1101 (k) “Communication of Hazards.”

Under this regulation, OSHA makes reference to conducting inspections according to 1926.1101 (k)(5)(ii)(B) and 1926.1101 (k)(5)(iii) or pursuant to the requirements of the Asbestos Hazard Emergency Response Act (AHERA) 40 CFR Part 763, Subpart E “Asbestos-Containing Materials in Schools.” The AHERA is regulated by the EPA, and applies to primary and secondary schools only; however, the procedures mandated under AHERA are generally considered the industry standards for surveys, as these are typically the most stringent.

3.3 Summary of Findings

A total of 58 homogeneous areas of suspect ACM were identified during the visual examination, from which 82 bulk samples were collected and subsequently submitted to a NYSDOH approved laboratory for analysis. Approximate sample locations are depicted on the Sample Location Plans, contained in Appendix B. A copy of laboratory reports and sample custody documentation are contained in Appendix C. Table D-I contained in Appendix D, provides a summary of the identified suspect ACM and associated analytical results.

The EPA, NYSDOL, and other regulatory agencies define ACM as any material containing greater than 1% of asbestos. Materials listed in bold font in Table D-I of Appendix D were determined to be ACM.

Materials containing trace asbestos (i.e., less than 1%) are not considered ACM; however, the OSHA recognizes materials that contain trace amounts of asbestos, and requires these materials be handled in accordance with their standard interpretation letter titled “Requirements for demolition operations involving material containing <1% asbestos “, dated August 13, 1999. As shown in Table D-I of Appendix D, 4 materials were determined to contain trace amounts of asbestos.

Other materials that were observed, but are not considered suspect ACM, include the following;

• Glass • Nylon-Coated Wire Jacket

• Wood • Metal

• Ceramic Tile • Doors

4.0 LEAD-CONTAINING MATERIALS

4.1 Methodology

A visual examination of the designated areas of the subject building was conducted by a Lead Inspector identify visible and accessible painted surfaces. The painted surfaces were categorized into homogeneous areas from which tests could be conducted. Each homogeneous area was tested using a Heuresis Pb200i XRF Analyzer. This equipment provides instantaneous measurements for lead concentration in mg/cm2, and displays readings that are positive or negative indications for lead-containing materials. Calibration checks for the XRF equipment were performed in accordance with the manufacturer’s recommendations.

4.2 Regulatory Compliance

Although New York State has established Title X, Part 67 of The Official Compilation of Codes, Rules, and Regulations (cited as NYCRR Title X, Part 67) for “Lead Poisoning Prevention and Control,” lead-containing materials inspections and risk assessments are generally subject to the requirements of federal regulations. The United States Department of Housing and Urban Development (HUD), EPA, and OSHA are the primary federal regulatory agencies responsible for the establishment and enforcement of such regulations. On a state level, the NYSDOH does require laboratories to be certified to perform lead analysis under the ELAP.

The HUD “Guidelines for the Evaluation and Control of Lead-Based Paint Hazards in Housing” include details pertaining to sampling and analysis of suspect lead-based paint (LBP), in addition to the identification and control of LBP hazards. The HUD guidelines pertain to federally owned or assisted housing; however, these are commonly referenced and made mandatory by other regulatory agencies. The EPA requirements for LBP activities, specified in 40 CFR Part 745, apply to targeted housing and child-occupied facilities, and are similar to HUD guideline requirements.

The OSHA Construction Standard for Lead (29 CFR 1926.62) applies to employees of an employer who may or will be exposed to occupational levels of lead. OSHA requires employees to maintain, at a minimum, awareness, respiratory protection, and hazard communication training.

4.3 Summary of Findings

A total of 60 locations were tested using the XRF spectrometer. Approximate sample locations are depicted on the Sample Location Plan/Plans, contained in Appendix B. A summary of the XRF results and calibration checks are provided in Appendix E. The XRF results provided in Table E-I of Appendix E identifies painted surfaces that contain detectable concentrations of lead, but are not considered lead-based paint lead-containing materials, as compared to HUD criteria.

Painted surfaces that did not contain lead at a concentration above the method detection limits are summarized in Table E-II of Appendix E. Calibration checks for the XRF spectrometer are provided in Table E-III of Appendix E.

5.0 POLYCHLORINATED BIPHENYLS

5.1 Methodology

A visual examination of the designated areas of the subject building was conducted by an Environmental Scientist to identify suspect PCB-containing materials. The identified materials were classified into homogeneous sampling areas. A homogeneous sampling area is defined as an area that is uniform by color, texture, construction/application, and general appearance.

Samples of each accessible homogeneous area were collected and placed in clean, labeled containers. The appropriate custody documentation was completed and the suspect PCB-containing caulk samples were submitted to Alpha Analytical, located in Mansfield, Massachusetts, a New York State Department of Health (NYSDOH) approved laboratory (ELAP No. 02048). The samples were laboratory analyzed for PCB, in accordance with EPA Method 8082.

5.2 Regulatory Compliance

PCB are primarily regulated by the EPA. The EPA has issued several documents and enforces federal mandated laws and regulations governing the usage, management, and disposal of PCB-containing materials. State and local regulatory agencies have also enacted laws and regulations concerning PCB materials, many of which are consistent with the regulations set forth by the EPA.

In accordance with the regulations and guidelines presented in 40 CFR Parts 750 and 761 “Disposal of Polychlorinated Biphenyls; Final Rule,” PCB wastes are generally regulated for disposal under the Toxic Substances Control Act (TSCA) if the concentrations are 50 ppm or greater. Per New York State Department of Environmental Conservation (NYSDEC) regulations, material containing PCB at 50 ppm or greater is regulated hazardous waste.

5.3 Summary of Findings

A total of 5 homogeneous suspect PCB-containing caulk materials were identified during the visual examination, from which 5 bulk samples were collected and subsequently submitted to a NYSDOH approved laboratory for analysis. Approximate sample locations are depicted on the Sample Location Plans, contained in Appendix B. A copy of laboratory reports and associated sample custody documentation are contained in Appendix C. Table D-II, of Appendix D, provides a summary of the identified suspect PCB-containing caulk and associated analytical results.

PCB-containing caulk is regulated under the TSCA as an “unauthorized use,” and is considered a regulated hazardous material at concentrations equal to or greater than 50 ppm. None of the samples collected contained total PCB at a concentration of 50 ppm or greater.

6.0 CONCLUSIONS AND RECOMMENDATIONS

The following conclusions and recommendations are prepared from ATL’s understanding that the designated areas of the subject building may be subject to a room refurbishment and roof replacement project. Should the management of the building areas change, it is recommended that the findings be revisited to reflect appropriate operations and management practices for hazardous materials containing items.

6.1 General

1. Concealed regulated hazardous materials may exist at the site that could be encountered during future building renovation/demolition activities. Wall, ceiling, floor, roofing, and/or other component systems may contain concealed suspect hazardous materials. If any suspect hazardous materials or hazardous materials-containing items are encountered during demolition and/or renovation activities, the activities disturbing the suspect material must stop and the material must be sampled and laboratory analyzed or otherwise managed pursuant to in accordance with applicable regulations.

6.2 Asbestos-Containing Materials

1. The materials listed in bold in Table D-I of Appendix D were determined to be ACM. The referenced table also shows materials that contain trace concentrations of asbestos and are regulated under OSHA.

2. Subpart 56-5(h) of 12 NYCRR Part 56 requires that no demolition, renovation, remodeling, or repair work be commenced by any owner or the owner’s agent prior to the completion of asbestos abatement. Asbestos abatement must be performed by an asbestos abatement contractor that maintains a current asbestos handling license, and employs NYSDOL certified asbestos handlers and supervisors. It is recommended that a 12 NYCRR 56 certified Project Monitor oversee abatement activities.

3. Subpart 56-5(g) of 12 NYCRR Part 56 specifies requirements for transmittal of asbestos survey information by the owner or owner’s agent. One copy of the asbestos survey report shall be sent to the local government entity charged with issuing a permit for such demolition, renovation, remodeling, or repair work under applicable State or local laws. If controlled demolition or pre-demolition activities will be performed, one copy of the asbestos survey report shall be submitted to the appropriate Asbestos Control Bureau district office. One copy of the asbestos survey report must be kept on the construction site throughout the duration of the asbestos project and any associated demolition, renovation, remodeling, or repair project.

6.3 Lead-Containing Materials

1. The materials listed in Table E-I of Appendix E lists materials that are not considered lead-containing materials per HUD criteria, but contain detectable concentrations of lead and are regulated under OSHA.

2. Identified lead-containing materials or paint with a detectable concentration of lead should be managed in accordance with applicable EPA and OSHA requirements prior to or during demolition, renovation, remodeling, or repair work.

3. Demolition/renovation contractors are required to conduct exposure monitoring or use historical objective data to ensure that employee exposures do not exceed the action level of 30 µg/m3.

6.4 PCB-Containing Materials

1. None of the caulk materials sampled contained PCB concentrations equal to or exceeding

50 ppm, and are therefore not considered hazardous materials/hazardous waste.

2. The EPA considers caulk with a PCB concentration greater than or equal to 50 ppm as an

“unauthorized use”, and requires that these materials be properly removed and disposed of.

Materials that contain PCB concentration less than 50 ppm may have specific handling, management, and disposal criteria to limit exposure and environmental impacts.

A

APPENDIX A

LICENSES AND CERTIFICATIONS

Asbestos Certificate Code Classifications The following letter codes shown on the enclosed asbestos certificates represent the corresponding asbestos classifications:

A - Asbestos Handler F - Operations & Maintenance B - Allied Trades G - Asbestos Supervisor C - Air Sampling Technician H - Asbestos Project Monitor D - Building Inspector I - Asbestos Project Designer E - Management Planner

Dylan M Putnam has fulfilled the requirements of the Toxic Substances Control Act (TSCA) Section 402, and has received certification to conduct lead-based paint activities pursuant to 40 CFR Part 745.226 as:

All EPA Administered Lead-based Paint Activities Program States, Tribes and Territories

This certification is valid from the date of issuance and expires August 15, 2026

Certification #

LBP-I-I250160-1

Issued On

August 01, 2023

Ben Conetta, Chief

Chemicals and Multimedia Programs Branch

Inspector

DIVISION OF SAFETY & HEALTH LICENSE AND CERTIFICATE UNIT, STATE OFFICE CAMPUS, BLDG. 12, ALBANY, NY 12226 ASBESTOS HANDLING LICENSE

P.O. Box 29, Canton, NY, 13617

This license has been issued in accordance with applicable provisions of Article 30 of the Labor Law of New York State and of the New York State Codes, Rules and Regulations (12 NYCRR Part 56). It is subject to suspension or revocation for a (1) serious violation of state, federal or local laws with regard to the conduct of an asbestos project, or (2) demonstrated lack of responsibility in the conduct of any job involving asbestos or asbestos material.

This license is valid only for the contractor named above and this license or a photocopy must be prominently displayed at the asbestos project worksite. This license verifies that all persons employed by the licensee on an asbestos project in New York State have been issued an Asbestos Certificate, appropriate for the type of work they perform, by the New York State Department of Labor.

Amy Phillips, Director For the Commissioner of Labor

SH 432 (12/21)

License Number:

License Class:

Date of Issue:

Expiration Date:

Duly Authorized Representative:

29276

RESTRICTED

10/01/2024 11/30/2025 Marijean B Remington is hereby APPROVED as an Environmental Laboratory in conformance with the National Environmental Laboratory Accreditation Conference Standards (2016) for the category

ENVIRONMENTAL ANALYSES SOLID AND HAZARDOUS WASTE

All approved analytes are listed below:

CERTIFICATE OF APPROVAL FOR LABORATORY SERVICE

Issued in accordance with and pursuant to section 502 Public Health Law of New York State

MR. MARCO SOARES

ALPHA ANALYTICAL LLC

8 WALKUP DR

WESTBOROUGH, MA 01581-1019

NY Lab Id No: 11148

NEW YORK STATE DEPARTMENT OF HEALTH

WADSWORTH CENTER

Expires Issued

12:01 AM April 01, 2025 April 01, 2024

Nitroaromatics and Isophorone

Isophorone EPA 8270E

Nitrobenzene EPA 8260D

EPA 8270E

Pyridine EPA 8270E

Nitrosoamines N-Nitrosodimethylamine EPA 8270E

N-Nitrosodi-n-propylamine EPA 8270E

N-Nitrosodiphenylamine EPA 8270E

Organophosphate Pesticides Parathion ethyl EPA 8270E

Petroleum Hydrocarbons

Diesel Range Organics EPA 8015D

Gasoline Range Organics EPA 8015D

Oil and Grease Total Recoverable EPA 9071B (Solvent:Hexane)

Phthalate Esters

Benzyl butyl phthalate EPA 8270E

Bis(2-ethylhexyl) phthalate EPA 8270E

Diethyl phthalate EPA 8270E

Dimethyl phthalate EPA 8270E

Di-n-butyl phthalate EPA 8270E

Di-n-octyl phthalate EPA 8270E

Polychlorinated Biphenyls

Aroclor 1016 (PCB-1016) EPA 8082A

Aroclor 1016 (PCB-1016) in Oil EPA 8082A

Aroclor 1221 (PCB-1221) EPA 8082A

Serial No.: 68691 Property of the New York State Department of Health. Certificates are valid only at the address shown and must be conspicuously posted by the laboratory. Continued accreditation depends on the laboratory's successful ongoing participation in the Program. Consumers may verify a laboratory's accreditation status online at https://apps.health.ny.gov/pubdoh/applinks/wc/elappublicweb/, by phone (518) 485-5570 or by email to elap@health.ny.gov.

is hereby APPROVED as an Environmental Laboratory in conformance with the National Environmental Laboratory Accreditation Conference Standards (2016) for the category

ENVIRONMENTAL ANALYSES SOLID AND HAZARDOUS WASTE

All approved analytes are listed below:

CERTIFICATE OF APPROVAL FOR LABORATORY SERVICE

Issued in accordance with and pursuant to section 502 Public Health Law of New York State

MR. MARCO SOARES

ALPHA ANALYTICAL LLC

8 WALKUP DR

WESTBOROUGH, MA 01581-1019

NY Lab Id No: 11148

NEW YORK STATE DEPARTMENT OF HEALTH

WADSWORTH CENTER

Expires Issued

12:01 AM April 01, 2025 April 01, 2024

Polychlorinated Biphenyls

Aroclor 1221 (PCB-1221) in Oil EPA 8082A

Aroclor 1232 (PCB-1232) EPA 8082A

Aroclor 1232 (PCB-1232) in Oil EPA 8082A

Aroclor 1242 (PCB-1242) EPA 8082A

Aroclor 1242 (PCB-1242) in Oil EPA 8082A

Aroclor 1248 (PCB-1248) EPA 8082A

Aroclor 1248 (PCB-1248) in Oil EPA 8082A

Aroclor 1254 (PCB-1254) EPA 8082A

Aroclor 1254 (PCB-1254) in Oil EPA 8082A

Aroclor 1260 (PCB-1260) EPA 8082A

Aroclor 1260 (PCB-1260) in Oil EPA 8082A

Aroclor 1262 (PCB-1262) EPA 8082A

Aroclor 1262 (PCB-1262) in Oil EPA 8082A

Aroclor 1268 (PCB-1268) EPA 8082A

Aroclor 1268 (PCB-1268) in Oil EPA 8082A

Polynuclear Aromatic Hydrocarbons

Acenaphthene EPA 8270E

Acenaphthylene EPA 8270E

Anthracene EPA 8270E

Benzo(a)anthracene EPA 8270E

Benzo(a)pyrene EPA 8270E

Benzo(b)fluoranthene EPA 8270E

Benzo(g,h,i)perylene EPA 8270E

Benzo(k)fluoranthene EPA 8270E

Chrysene EPA 8270E

Dibenzo(a,h)anthracene EPA 8270E

Fluoranthene EPA 8270E

Serial No.: 68691 Property of the New York State Department of Health. Certificates are valid only at the address shown and must be conspicuously posted by the laboratory. Continued accreditation depends on the laboratory's successful ongoing participation in the Program. Consumers may verify a laboratory's accreditation status online at https://apps.health.ny.gov/pubdoh/applinks/wc/elappublicweb/, by phone (518) 485-5570 or by email to elap@health.ny.gov.

B

APPENDIX B

SAMPLE LOCATION PLANS

Suite G5

Suite G7

Suite H5

Suite I5

Suite H6

Suite I4

Suite I6

Suite J5

Suite J4

Suite J6

Suite G6

Suite I7

Suite H4

HSS8x8x1/4

RACK

RACK

RACK

RACK

RACK

RACK

RACK RACK

RACK

RACK

RACK RACK

RACK RACK

UPS

UPS

UPS

RACK

RACK

RACK

RACK

LAV-1

REFG REFG

REFG

RACK

RACK

RACK

RACK

RACK

RACK

RACK

UPS

BATT

RA

CK

RA

CK

RA

CK

UPS

RA

CK

RA

CK

RA

CK

CLEAN

ROOM

Building 3 Sample Location Plan Scale: NTS

Drawing: Project No.: Date :Drawn By:

April 2025SAMPLE LOCATION PLAN __ of __

Multiple Areas Air Force Research Laboratory Rome, New York www.AtlanticTesting.com

Scale:

As Noted1 2SRS UT5662C

WBE Certified Company

LEGEND :

Suspect Asbestos Sample ID and Approximate Location

Suspect Lead-Based XRF Sample ID and Approximate Location

Side Designation for XRF SamplingSide A

UT5662CLX01

UT5662CAI01

Suspect PCB-Containing Caulk Sample ID and Approximate Location

ATL Room Designation for Labeling Purposes

UT5662CPI01

A

ASBESTOS KEY NOTES :

11-A, and 11-B Yellow Mastic Associated with Off White 12 by 12 Inch Floor Tile; and 6-A, and 6-B Black Residual Mastic

ATLANTIC TESTING LABORATORIES, Limited Albany, NY Binghamton, NY Buffalo, NY Canton, NY Plattsburgh, NY

Rochester, NY Utica, NY

Elmira, NY

Poughkeepsie, NY Syracuse, NY Watertown, NY

UT5662CLX31

UT5662CLX44

UT5662CLX45

UT5662CLX46

UT5662CLX47

UT5662CLX26

UT5662CLX27

UT5662CLX74

UT5662CLX75

UT5662CLX23

UT5662CLX68

UT5662CLX69

UT5662CLX70

UT5662CLX71

UT5662CLX39

UT5662CLX40

UT5662CLX41

UT5662CLX78

UT5662CLX79

UT5662CLX38

UT5662CLX66

UT5662CLX67

UT5662CLX37

UT5662CLX72

UT5662CLX73

UT5662CLX52

UT5662CLX53

UT5662CLX29

UT5662CLX48

UT5662CLX49

UT5662CLX56

UT5662CLX57

UT5662CLX32

UT5662CLX33

UT5662CLX50

UT5662CLX51

UT5662CLX54

UT5662CLX55

UT5662CLX64

UT5662CLX65

UT5662CLX20

UT5662CLX34

UT5662CLX35

UT5662CLX36

UT5662CLX76

UT5662CLX77

UT5662CLX42

UT5662CLX43

UT5662CLX22

UT5662CLX62

UT5662CLX63

UT5662CLX21

UT5662CLX30

UT5662CLX60

UT5662CLX61

UT5662CLX58

UT5662CLX59

UT5662CLX28

UT5662CLX24

UT5662CLX25

UT5662CAI02A

UT5662CAI03A

UT5662CAI04A

UT5662CAI24A

UT5662CAI02B

UT5662CAI03B

UT5662CAI04B

UT5662CAI30A

UT5662CAI30B

UT5662CAI34A

UT5662CAI34B

UT5662CAI01A

UT5662CAI05B

UT5662CAI06C

UT5662CAI07B

UT5662CAI24B

UT5662CAI31A

UT5662CAI31B

UT5662CAI32A

UT5662CAI32B

UT5662CAI23B

UT5662CAI23A

UT5662CAI28A

UT5662CAI28B

UT5662CAI29A

UT5662CAI29B

UT5662CAI22A

UT5662CAI03C

UT5662CAI01A

UT5662CAI22B

UT5662CAI05A

UT5662CAI06A

UT5662CAI06B

UT5662CAI07A

UT5662CPI24

UT5662CPI30

Side D

Side A

Side B

Side C

Corridor 0

Corridor 5

Corridor 4.5

UT5662CAI21A

UT5662CAI21B

H5 Com Closet

C or rid or

H

C or rid or

I

2 Black Residual Wall Adhesive

AutoCAD SHX Text

CORRIDOR 4

Suite F3Suite E3 Suite C3Suite A3

Suite B5

Suite B6

Suite A7

Suite B8

Suite C8 Suite A8

Suite C5

Suite D8

Suite E5

Suite F5

Suite G5

Suite F6

Suite G7

Suite E8

Suite H5

Suite H6

Suite G6

Suite H7

Suite D3

Suite H4

Suite C6

R a m p

P70126P70126P70126P69864P69840P69840P69840P69840P69840P69864XG0047 P69864 XG0012

XG004

XG004

W8x48W8x48

W8x48

W8x48

W8x48

W8x48

TRANS

UPS

MAINT

BYPASS

RACK

RACK

RACK

RACK

RACK

RACK

RACK

RACK

RACK

RACK

RACK

RACK

RACK RACK RACK

RACK

RACK

REF REF

RACK

RACK

RACK

RACK

RACK

VENDING

REFG

REFG

VENDING

REFG

REFG

REFG

RA

CK

RA

CK

RA

CK

AU

D

IO

C

H

AM

BE

R

S1UND�B11T*

Suite G8

Building 3 Roof Sample Location Plan Scale: NTS

Drawing: Project No.: Date :Drawn By:

April 2025SAMPLE LOCATION PLAN __ of __

Multiple Areas Air Force Research Laboratory Rome, New York www.AtlanticTesting.com

Scale:

As Noted2 2SRS UT5662C

WBE Certified Company

LEGEND :

Suspect Asbestos Sample ID and Approximate Location

Suspect Lead-Based XRF Sample ID and Approximate Location

Side Designation for XRF SamplingSide A

UT5662CLX01

UT5662CAI01

Suspect PCB-Containing Caulk Sample ID and Approximate Location

ATL Room Designation for Labeling Purposes

UT5662CPI01

A

ASBESTOS KEY NOTES :

Black Tar Paper (Second Layer)

ATLANTIC TESTING LABORATORIES, Limited Albany, NY Binghamton, NY Buffalo, NY Canton, NY Plattsburgh, NY

Rochester, NY Utica, NY

Elmira, NY

Poughkeepsie, NY Syracuse, NY Watertown, NY

UT5662CLX447

UT5662CLX448

UT5662CLX449

UT5662CLX450

UT5662CLX451

UT5662CLX453

UT5662CLX454

UT5662CLX452

UT5662CAI50A

UT5662CAI50B

UT5662CAI51B

UT5662CAI39A

UT5662CAI39B

UT5662CAI35A

UT5662CAI35B

UT5662CAI36A

UT5662CAI36B

UT5662CAI37A

UT5662CAI37B

UT5662CAI38A

UT5662CAI38B

UT5662CAI40A

UT5662CAI40B

UT5662CAI41A

UT5662CAI41B

UT5662CAI42A

UT5662CAI42B

UT5662CAI47A

UT5662CAI47B

UT5662CAI48A

UT5662CAI48B

UT5662CAI49A

UT5662CAI49B

UT5662CAI51A

UT5662CAI43A

UT5662CAI43B

UT5662CAI44A

UT5662CAI44B

UT5662CAI45A

UT5662CAI45B

UT5662CAI46A

UT5662CAI46B

UT5662CAI52A

UT5662CAI52B

UT5662CAI53A

UT5662CAI53B

UT5662CAI54A

UT5662CAI54B

UT5662CAI55A

UT5662CAI55B

UT5662CAI56A

UT5662CAI56B

UT5662CAI57A

UT5662CAI57B

UT5662CPI51

UT5662CPI50

UT5662CPI39

Side A

Side D

Side B

Side C

Roof 1 Roof 3

Roof 2

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66FW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/48

AutoCAD SHX Text

66SADWB

AutoCAD SHX Text

TPM6648

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66DAD

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66FW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/48

AutoCAD SHX Text

66SADWB

AutoCAD SHX Text

TPM6648

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66DAD

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/48

AutoCAD SHX Text

66SADWB

AutoCAD SHX Text

TPM6648

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66FW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/48

AutoCAD SHX Text

66SADWB

AutoCAD SHX Text

TPM6648

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/48

AutoCAD SHX Text

66SADWB

AutoCAD SHX Text

TPM6648

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66FW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/48

AutoCAD SHX Text

66SADWB

AutoCAD SHX Text

TPM6648

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66DAD

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66DAD

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66FW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/48

AutoCAD SHX Text

66SADWB

AutoCAD SHX Text

TPM6648

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66DAD

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66FW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/48

AutoCAD SHX Text

66SADWB

AutoCAD SHX Text

TPM6648

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66DAD

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66FW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text 66/48

AutoCAD SHX Text

66SADWB

AutoCAD SHX Text

TPM6648

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/48

AutoCAD SHX Text

66SADWB

AutoCAD SHX Text

TPM6648

AutoCAD SHX Text 66/36

AutoCAD SHX Text 66A

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66FW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text 66/36

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6636

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text 66/42

AutoCAD SHX Text

66SADFW

AutoCAD SHX Text

TPM6642

AutoCAD SHX Text

AutoCAD SHX Text

NADGBCKS

AutoCAD SHX Text

AutoCAD SHX Text

NADGBCKS

AutoCAD SHX Text

AutoCAD SHX Text

NADGBCKS

AutoCAD SHX Text

AutoCAD SHX Text

NADGBCKS

AutoCAD SHX Text

AutoCAD SHX Text

NADGBCKS

AutoCAD SHX Text

AutoCAD SHX Text

NADGBCKS

AutoCAD SHX Text

AutoCAD SHX Text

NADGBCKS

AutoCAD SHX Text

AutoCAD SHX Text

NADGBCKS

C

APPENDIX C

LABORATORY REPORTS AND CUSTODY DOCUMENTATION

AmeriSci New York

117 EAST 30TH ST.

NEW YORK, NY 10016

TEL: (212) 679-8600 • FAX: (212) 679-3114

12/27/2024 AmeriSci Job # 224122839

12/30/24

ELAP # 11480 1 13

UT5662C; AFRL Building 3; Rome, NY

PLM Bulk Asbestos Report Date Received

Date Examined

RE:

ofPage

P.O. #

Atlantic Testing Laboratories, Limited

6431 US Highway 11

Canton, NY 13617

Attn: Andrew Amell

Asbestos Present Total % AsbestosClient No. / HGA Lab No. Notes

Location:

NoUT5662CAI01A 224122839-01

H5 Suite - Row 1: Yellow Carpet Adhesive

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Yellow, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 41%

Location:

NoUT5662CAI01B 224122839-02

H4 Suite - Row 1: Yellow Carpet Adhesive

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Yellow, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 43%

Location:

NoUT5662CAI02A 224122839-03

H5 - Row 2: Gray Gypsum Board

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Gray/Brown, Heterogeneous, Fibrous, Bulk Material

Cellulose 7.0%, Fibrous glass Trace, Non-fibrous 93%

Location:

NoUT5662CAI02B 224122839-04

H5 - Row 2: Gray Gypsum Board

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Brown/Gray, Heterogeneous, Fibrous, Bulk Material

Cellulose 5.0%, Fibrous glass Trace, Non-fibrous 95%

Location:

NoUT5662CAI03A 224122839-05

H5 - Row 3: White Joint Compound Row 2

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

White, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 100%

Location:

NoUT5662CAI03B 224122839-06

H5 - Row 3: White Joint Compound Row 2

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

White, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 100%

See Reporting notes on last page

AmeriSci Job #: 224122839 Page 2 of 13

UT5662C; AFRL Building 3; Rome, NY

PLM Bulk Asbestos Report Client Name: Atlantic Testing Laboratories, Limited

Asbestos Present Total % AsbestosClient No. / HGA Lab No. Notes

Location:

NoUT5662CAI03C 224122839-07

H5 - Row 3: White Joint Compound Row 2

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

White, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 100%

Location:

NoUT5662CAI04A 224122839-08

H5 - Row 4: White Seam Tape Row 2

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Off-White, Homogeneous, Fibrous, Bulk Material

Cellulose 93%, Non-fibrous 7.0%

Location:

NoUT5662CAI04B 224122839-09

H5 - Row 4: White Seam Tape Row 2

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Cream, Homogeneous, Fibrous, Bulk Material

Cellulose 97%, Non-fibrous 3.0%

Location:

NoUT5662CAI05A 224122839-10

H6 - Row 5: Off-White Gypsum Wall Board

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Brown/White, Heterogeneous, Fibrous, Bulk Material

Cellulose 10%, Fibrous glass Trace, Non-fibrous 90%

Location:

NoUT5662CAI05B 224122839-11

H6 - Row 5: Off-White Gypsum Wall Board

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Brown/White, Heterogeneous, Fibrous, Bulk Material

Cellulose 5.0%, Fibrous glass Trace, Non-fibrous 95%

Location:

NoUT5662CAI06A 224122839-12

H6 - Row 6: Off-White Joint Compound Row 5

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

White, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 100%

Location:

NoUT5662CAI06B 224122839-13

H6 - Row 6: Off-White Joint Compound Row 5

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

White, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 100%

AmeriSci Job #: 224122839 Page 3 of 13

PLM Bulk Asbestos Report Client Name: Atlantic Testing Laboratories, Limited

Asbestos Present Total % AsbestosClient No. / HGA Lab No. Notes

Location:

NoUT5662CAI06C 224122839-14

H6 - Row 6: Off-White Joint Compound Row 5

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

White, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 100%

Location:

NoUT5662CAI07A 224122839-15

H6 - Row 7: Seam Tape Row 5

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Cream, Homogeneous, Fibrous, Bulk Material

Cellulose 97%, Non-fibrous 3.0%

Location:

NoUT5662CAI07B 224122839-16

H6 - Row 7: Seam Tape Row 5

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Cream, Homogeneous, Fibrous, Bulk Material

Cellulose 98%, Non-fibrous 2.0%

Location:

UT5662CAI21A 224122839-17

Corridor H - Row 21: White 2- By 4-Foot Fissured And Pinholed Ceiling Tile Sample Not Submitted

NA

Analyst Description:

Asbestos Types:

Other Material:

Bulk Material

Location:

UT5662CAI21B 224122839-18

Corridor 4.5 - Row 21: White 2- By 4-Foot Fissured And Pinholed Ceiling Tile Sample Not Submitted

NA

Analyst Description:

Asbestos Types:

Other Material:

Bulk Material

Location:

NoUT5662CAI22A 224122839-19

Corridor H - Row 22: Gray Block Mortar

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Gray, Homogeneous, Non-Fibrous, Cementitious, Bulk Material

Cellulose Trace, Non-fibrous 100%

Location:

NoUT5662CAI22B 224122839-20

Corridor 5 - Row 22: Gray Block Mortar

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Gray, Homogeneous, Non-Fibrous, Cementitious, Bulk Material

Cellulose Trace, Non-fibrous 100%

AmeriSci Job #: 224122839 Page 4 of 13

PLM Bulk Asbestos Report Client Name: Atlantic Testing Laboratories, Limited

Asbestos Present Total % AsbestosClient No. / HGA Lab No. Notes

Location:

NoUT5662CAI23A 224122839-21

Corridor G - Row 23: White Brick Mortar

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

White/Gray, Heterogeneous, Non-Fibrous, Cementitious, Bulk Material

Cellulose Trace, Non-fibrous 100%

Location:

NoUT5662CAI23B 224122839-22

Corridor 6 - Row 23: White Brick Mortar

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

White/Gray, Heterogeneous, Non-Fibrous, Cementitious, Bulk Material

Non-fibrous 100%

Location:

NoUT5662CAI24A 224122839-23

Corridor H - Row 24: White Door Frame Caulk

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

White, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 2.9%

Location:

NoUT5662CAI24B 224122839-24

Corridor 4.5 - Row 24: White Door Frame Caulk

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

White, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 2.9%

Location:

NoUT5662CAI28A 224122839-25

H5 Com Closet - Row 28: Black 4-Inch Cove Base

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 1.4%

Location:

NoUT5662CAI28B 224122839-26

H5 Com Closet - Row 28: Black 4-Inch Cove Base

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

White, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 2.1%

Location:

NoUT5662CAI29A 224122839-27

H5 Com Closet - Row 29: Cove Base Associated Yellow Adhesive Row 28

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Tan, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 30%

AmeriSci Job #: 224122839 Page 5 of 13

PLM Bulk Asbestos Report Client Name: Atlantic Testing Laboratories, Limited

Asbestos Present Total % AsbestosClient No. / HGA Lab No. Notes

Location:

NoUT5662CAI29B 224122839-28

H5 Com Closet - Row 29: Cove Base Associated Yellow Adhesive Row 28

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Tan, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 26%

Location:

YesUT5662CAI30A 224122839-29

H5 Com Closet - Row 30: Gray Door Frame Caulk

1.5% (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Dark Gray, Homogeneous, Fibrous, Bulk Material Chrysotile 1.5%

Non-fibrous 5.4%

Location:

UT5662CAI30B 224122839-30

H5 Com Closet - Row 30: Gray Door Frame Caulk

NA/PS

Analyst Description:

Asbestos Types:

Other Material:

Bulk Material

Location:

NoUT5662CAI31A 224122839-31

H5 Com Closet - Row 31: Light Gray 12- By 12-Inch Marbled Floor Tile

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Lt. Gray, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 5.2%

Location:

NoUT5662CAI31B 224122839-32

H5 Com Closet - Row 31: Light Gray 12- By 12-Inch Marbled Floor Tile

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Lt. Gray, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 4.5%

Location:

NoUT5662CAI32A 224122839-33

H5 Com Closet - Row 32: Floor Tile Associated Black Mastic Row 31

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 2.7%

Location:

YesUT5662CAI32B 224122839-34

H5 Com Closet - Row 32: Floor Tile Associated Black Mastic Row 31

Inconclusive - Trace Chrysotile detected at 1% or less (NOB by EPA 600/M4-82-020) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black, Homogeneous, Non-Fibrous, Bulk Material Chrysotile <0.3 % pc

Non-fibrous 3.7%

AmeriSci Job #: 224122839 Page 6 of 13

PLM Bulk Asbestos Report Client Name: Atlantic Testing Laboratories, Limited

Asbestos Present Total % AsbestosClient No. / HGA Lab No. Notes

Location:

YesUT5662CAI34A 224122839-35

H5 Com Closet - Row 34: Black Residual Wall Adhesive

1.8% (NOB by EPA 600/M4-82-020) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black/Gray, Heterogeneous, Fibrous, Bulk Material Chrysotile 1.8%

Non-fibrous 36%

Location:

UT5662CAI34B 224122839-36

H5 Com Closet - Row 34: Black Residual Wall Adhesive

NA/PS

Analyst Description:

Asbestos Types:

Other Material:

Bulk Material

Location:

NoUT5662CAI35A 224122839-37

Roof 3 - Row 35: Black Asphalt Roll Roofing

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black/Gray, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 22%

Location:

NoUT5662CAI35B 224122839-38

Roof 3 - Row 35: Black Asphalt Roll Roofing

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black/Gray, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 11%

Location:

NoUT5662CAI36A 224122839-39

Roof 3 - Row 36: Beige Fibrous Board Row 35

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Brown, Homogeneous, Fibrous, Bulk Material

Cellulose 40%, Non-fibrous 60%

Location:

NoUT5662CAI36B 224122839-40

Roof 3 - Row 36: Beige Fibrous Board Row 35

NAD

(by NYS ELAP 198.1) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Brown, Homogeneous, Fibrous, Bulk Material

Cellulose 40%, Non-fibrous 60%

Location:

NoUT5662CAI37A 224122839-41

Row 37: Black Insulation Backing Paper Row 35

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black, Heterogeneous, Non-Fibrous, Bulk Material

Non-fibrous 0.6%

AmeriSci Job #: 224122839 Page 7 of 13

PLM Bulk Asbestos Report Client Name: Atlantic Testing Laboratories, Limited

Asbestos Present Total % AsbestosClient No. / HGA Lab No. Notes

Location:

NoUT5662CAI37B 224122839-42

Row 37: Black Insulation Backing Paper Row 35

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black, Heterogeneous, Non-Fibrous, Bulk Material

Non-fibrous 0.5%

Location:

NoUT5662CAI38A 224122839-43

Roof 3 - Row 38: Black Built-Up Roofing Row 35

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 5.7%

Location:

NoUT5662CAI38B 224122839-44

Roof 3 - Row 38: Black Built-Up Roofing Row 35

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 1.7%

Location:

NoUT5662CAI39A 224122839-45

Roof 3 - Row 39: Red Seam Sealant

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Red, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 36%

Location:

NoUT5662CAI39B 224122839-46

Roof 3 - Row 39: Red Seam Sealant

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Red, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 32%

Location:

NoUT5662CAI40A 224122839-47

Roof 3 - Row 40: Black Asphalt Roll Roofing

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black/White, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 25%

Location:

NoUT5662CAI40B 224122839-48

Roof 3 - Row 40: Black Asphalt Roll Roofing

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black/White, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 17%

AmeriSci Job #: 224122839 Page 8 of 13

PLM Bulk Asbestos Report Client Name: Atlantic Testing Laboratories, Limited

Asbestos Present Total % AsbestosClient No. / HGA Lab No. Notes

Location:

NoUT5662CAI41A 224122839-49

Roof 3 - Row 41: Black Tar Paper Row 40

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 3.3%

Location:

NoUT5662CAI41B 224122839-50

Roof 3 - Row 41: Black Tar Paper Row 40

Inconclusive - NAD (NOB by NYS ELAP 198.6) by Valeriu Voicu on 12/30/24

Analyst Description:

Asbestos Types:

Other Material:

Black, Homogeneous, Non-Fibrous, Bulk Material

Non-fibrous 7.8%

Location:

No…