First_Question_Set_and_Answers.pdf

First Question Set

1. Cover PD – 3.2.1.1 states the drawing is marked with a an electrical supplies room, however I do not see it on the drawing. Please mark where the electrical supplies room is, and give an approx. distance away from mezzanine location.

A. AF Drawing LEG803-01 has been updated showing location of power panels/Mechanical Room. Approx distance is 90’.

2. Appendix A – Tire Carousel Recommendation from a vertical tire carousel manufacturer: Yes we can quote it. but the spec does not make sense. Specifically, they call for storing tires from 10” D to 45” D as if they are going on one machine. Better approach is they figure out how many (or what percentage) are under 28”, how many between 28” and 32” and how many between 32” and 45”. The cost of making all the same is a big waste if the tires fall within the listed intervals.

A: There are approximately 420 tires total at present.

Percentage of tires

Less than 28” diameter – 50% 28” dia. – 32” dia. – 25% 32” dia. - 45” dia. – 20% Larger than 45” – 5% (to be stored in tire pallet rack next to carousel units)

3. Appendix E – Bin Shelving The drawing says Type A Bin Shelving is 18”D x 36”W x 87”H. The appendix says there are two types of bin shelving (A&F) and the size is 36’W x 24”D and 48”W x 24”D. It also states there is bin shelving with modular drawers located on a mobile aisle-which is not depicted in any appendix or on the drawing. Can you please clarify the entire appendix? It appears as though it was written for a previous project. The drawing only depicts bin shelving in size 18”d x 36”w x 87”H.

A: You are correct, the wrong file was forwarded to Contracting as part of the Contracting Package from a previous project. The proper file is attached.

4. Is this building located on a flight line?

A. No

5. Is there a dock at the building for unloading?

A. Yes