Questions and Answers - FA860126Q0092.pdf
PDF 373 KB Posted
- Attached to
- F20840 OBL, PH2 Office Furniture 2026TP112
- Solicitation number
- FA860126Q0092
About this file
This is a Questions and Answers (Q&A) document issued by the Air Force Life Cycle Management Center (AFLCMC) responding to inquiries regarding solicitation FA8601-26-Q-0092 for OBL-USAF UC PH2 Office Furniture (Project #2026TP112), dated 6 August 2026.
The document addresses five inquiries from potential contractors regarding furniture specifications and design documentation. Key clarifications include: (1) no DWG files are available; only a PDF plan is provided; (2) Panel Dividers must be 74" in height, monolithic or combination monolithic/stack configuration, non-power, acoustic panels with Grade B panel fabric, wall-mounted, with locations and dimensions specified on the plan; (3) contractors may substitute a 58" panel with a 16" stack to achieve the required 74" height; (4) the W3 clip specification should reference "See Plan for Location"; and (5) desk run dimensions are estimated at 24" x 72" based on available information, though formal design drawings with precise measurements were not available at the time of the response. The document was signed by Candice Snow, AFLCMC/PZIBA Contracting Officer, on 6 August 2026.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
AIR FORCE LIFE CYCLE MANAGEMENT CENTER
WRIGHT-PATTERSON AIR FORCE BASE OHIO
One AFMC…Powering the World’s Greatest Air Force
6 August 2026
FROM: AFLCMC/PZIBA
2275 D Street Building 16, Area B Wright-Patterson AFB OH 45433
SUBJECT: Response to Inquiries regarding FA8601-26-Q-0092, OBL-USAF UC PH2 Office Furniture, F20840 Project # 2026TP112
Questions:
1. Are you able to provide a DWG for the plan / provide a clearer PDF of the furniture plan?
Specify the panel lengths you need?
Answer: No dwg provided for this project, only the PDF.
2. W1 calls for panel locations on plan but has no info in the description box for the panels.
Please provide.
Answer: Panel Dividers: 74" Monolithic or combination Monolithic/Stack, Non- Power, Acoustic Panels, Wall Mounted, Gr. B panel fabric. See Plan for Locations and Dimensions.
3. W2 – Haworth cannot do a full height 74” panel. We can do a 58” panel with a 16” stack to meet that height, is this acceptable?
Answer: Yes
4. W3 says “See Plan for…” Is there something this should be calling out?
Answer: The clip should have said see plan for Location.
5. W3 are you able to tell us the sizes of these desk runs? A guess can be made from the PDF but would like to be as accurate as possible.
Answer: Based on the information available, the estimated size for the desk runs is 24" x 72". This is an estimate, as formal design drawings with precise measurements were not available.
CANDICE SNOW
AFLCMC/PZIBA, Contracting Officer
| 2026-08-07T10:27:31-0400 | |
| SNOW.CANDICE.LYNN.1423542060 |
File details come from the government source that posted it. Updated .