Additional Shuttle Orbiter model details v01.pdf

FA8601-12-R-0081

Additional Shuttle Orbiter model details:

On the surface of the model, thermal tiles and blankets are to be depicted visually, though it is not required to reproduce in scale the actual surface relief (i.e., “roughness”) of the actual vehicle. In addition, tile numbers are not required, but the impression of individual tiles and the tile pattern must be discernable. Surface markings such as rescue, warning, and servicing placards are to be replicated. No wear or weathering appearance on the orbiter surface is required.

Clear acrylic rods are to be sized in diameter appropriate to the weight of the model, and hold the model with 8-10 inches of clearance from the base under the left wingtip (the vehicle will be displayed banked at 40 degrees left). The support base must be sized to provide long-term stable support, and be matte black in color, showing no wood grain if constructed of wood. The exact shape of the base and rod configuration should be proposed by the contractor, subject to the parameters described above.