RFI Responses.pdf

Renovate/Construct Aero Evacuation Squadron Facility 34004, Project 079001A-B

Solicitation Number: FA8601-11-B-0007

1. Our employee will be hand delivering the bid. They do not have a base pass and needs you to sponsor them for the bid delivery. Could you please arrange so they can get a day pass to deliver the bid?

Response:

ASC/PKOC

Attn: Keith Morris, FA8601-11-B-0007 Area C, Bldg 1, Room 111 1940 Allbrook Dr, Ste 3 Wright-Patterson AFB, OH 45433-5309

Offerors may hand deliver their bid to the above office address or if the offeror plans on attending the bid opening, they can bring it with them to the bid opening - It is the offeror’s choice. If an offeror would like to hand deliver their bid to the above office address and does not have a base pass, a Government representative can meet the offeror outside of Gate 1A (right off of SR-444 - There is a small parking lot right outside of the gate). Please contact either Keith Morris at keith.morris@wpafb.af.mil or (937) 522-4553, James Bane at (937) 522-4546, Stewart Meeker at (937) 522-4554 or Jamien Johnson at (937) 522-4564 if you would like to set up a time to meet outside of Gate 1A before 12:00 P.M. EST on 22 AUG 2011

The public bid opening will be held at 2:00 P.M. EST at Bldg 893, Area A, Wright- Patterson AFB OH 45433 (Twin Base Golf Course) on 22 AUG 2011. This building can be accessed at the entrance to Gate 16A SR-444. No security pass is required at this entrance. Any bids submitted after 1:30 P.M. EST on 22 AUG 2011 shall be delivered to this location.

2. Solicitation Page 42, Mandatory Submission section, requires us to submit ‘reference information’. Please elaborate on the ‘reference information’ that you need from the bidding contractors.

Response:

Reference information is anything that may be asked for within the solicitation, specifications, and drawings that are not identified through B-M.

mailto:keith.morris@wpafb.af.mil

3. Please clarify if there is asbestos in the drywall joint compound. Will Wright pat require us to bag the drywall removed because of the joint compound?

Refer to drawings and specifications (including specification 02 08 10 environmental survey by Hayden Safety Engineers) for answers to RFI #1.

4. Please provide water flow test information available for this site.

Static Pressure (psi): 53 Residual Pressure (psi): 49 Flow (gpm): 1113 NOTE: Fire flow data is provided for bidding purposes only. Contractor must conduct a flow test prior to submitting fire sprinkler shop drawings.

5. Please identify load bearing walls in the demo drawings and precautions to be undertaken to protect them during demolition.

Refer to drawing A500, section 1, and refer to bond beams on existing walls.