TM-86-01Q_SLICC_and_SLIP.pdf

TM-86-01Q 27 Oct 2017 1-01: AF TMSS Linear TMs

GUEE-18-002

Prepared by Christopher Morris, 406 SCMS/GUEE, 478-222-7975

Air Force Technical Manual Contract Requirements (TMCR) For

SENIOR LEADER IN-TRANSIT CONFERENCE CAPSULE (SLICC)

NSN 5411-01-626-4624

NSN 5411-01-630-4716

and

SENIOR LEADER IN-TRANSIT PALLET (SLIP)

NSN 7360-01-631-2359

ATTACHMENT , TO CDRL SEQUENCE NUMBER , EXHIBIT

REQUEST FOR PROPOSAL/CONTRACT: , CLIN

Date: 22 February 2018

SECTION 1. TECHNICAL ORDER (TO) PROGRAM REQUIREMENTS

1. TMCR Tailoring. This TMCR has been tailored by the program office, including the associated tables, matrices and Specification/Standard Interface Records (SIRs). The Contractor may propose and submit, in writing, additional tailoring to the Technical Order Manager Agency/Agent (TOMA), Government Program Manager (PM), and Procuring Contracting Officer (PCO) for consideration. The tailored TMCR shall be attached to the Contract Data Requirements List (CDRL) for Technical Order (TO) delivery, and shall be included in the proposal as a separate exhibit, referenced in the proposal Statement Of Work (SOW). Proposals shall be compatible with the SENIOR LEADER IN-TRANSIT CONFERENCE CAPSULE (SLICC) and SENIOR LEADER IN-TRANSIT PALLET (SLIP) Technical Order Concept of Operations (TO CONOPS) if prepared. Air Force (AF) TO Acquisition procedures, including procedures for tailoring this document, are found in TO 00-5-3, AF Technical Order Life Cycle Management, located at http://www.tinker.af.mil/Home/TechnicalOrders.aspx. A copy may also be obtained from the Program TO Manager. Any terms or procedures found in this document may be researched there.

2. TO Program Scope. The Contractor shall develop and deliver technical manuals in accordance with (IAW) this TMCR that supports the SENIOR LEADER IN-TRANSIT CONFERENCE CAPSULE (SLICC) and SENIOR LEADER IN-TRANSIT PALLET (SLIP) requirements for technically usable manuals concurrent with the program’s TO CONOPS if prepared. The Contractor may recommend additional Section 2 tailoring to propose new TO types (Table 1) and source data and TO updates (Table

2) required to support the SENIOR LEADER IN-TRANSIT CONFERENCE CAPSULE (SLICC) and SENIOR LEADER IN-TRANSIT PALLET (SLIP) program’s objectives.

3. Commercial Manuals. Contractors shall recommend the use of existing commercial manuals to the maximum extent possible without impairing program support objectives. All proposed commercial manuals are subject to Government review and approval.

3.1. The AF requests the ability to electronically store, print, distribute, update and decollate the commercial manual to allow for printing. Commercial manuals shall be delivered as Portable Document Format (PDF) unless otherwise specified.

3.2. Approved Commercial-Off-The-Shelf (COTS) Manuals shall be delivered with an Identifying TO Publication Sheet (ITPS), IAW MIL-PRF-32216, Performance Specification: Evaluation Of Commercial Off-The-Shelf (COTS) Manuals And Preparation Of Supplemental Data. All PDF files of commercial data shall be non-password protected to allow the AF to decollate the manual for printing.

3.3. If the proposed COTS data is found to be insufficient after review by the Government, the Contractor shall prepare supplemental data for the COTS manual as required IAW Military Standard (MIL-STD)-38784. If the COTS data cannot be supplemented sufficiently the Contractor may be tasked to develop new TM data IAW the applicable TMSS listed in Section 2, Table 1.

4. Technical Manual Specifications and Standards (TMSS) Tailoring(T). N/A

4.1. N/A

5. Subsequent TO/Data Requirements. When new TO requirements are identified the Contractor shall notify the Government utilizing DI-TMSS-80067C, Technical Manual (TM) Contractor Furnished Aeronautical Equipment or Contractor Furnished Equipment (CFAE/CFE) Notices, or approved Contractor formats. This process shall require Government review and approval of recommended additional requirements prior to developing additional data.

6. TO Development(T). TOs shall be written to a scope and depth of coverage to support the SENIOR LEADER IN-TRANSIT CONFERENCE CAPSULE (SLICC) and SENIOR LEADER IN-TRANSIT PALLET (SLIP) operations and maintenance concepts.

6.1(T). N/A

6.2(T). N/A

7. TO Numbering(T). TO numbers for the existing manuals shall be used.

8. Data Rights. Contractors shall comply with 10 U.S.C. 2320 and cognizant Defense Federal Acquisition Regulation Supplement (DFARS) provisions and clauses in providing Unlimited Rights for all source data, TO publications, and TO updates prepared specifically for the contract. Government rights in data are specified in the DFARS, 252.227-7013, Rights in Technical Data, Noncommercial Items, 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, and 252.227-7015, Technical Data-Commercial Items. The Government shall be given Unlimited Rights for all Government-funded business rules (tailoring and application methods and procedures) and documented business processes developed under the contract for the purpose of TO development. For all data delivered to the Government with other than Unlimited Rights, the Contractor shall assert their data rights IAW DFARS 252.227-7017, Identification and Assertion of Use, Release, or Disclosure Restrictions. The Contractor shall pass through and enforce all requirements in this TMCR to all sub-Contractors.

9. Classification, Distribution, Destruction, Disclosure, Export Control Notices, and Cyber Security.

Contractors shall recommend the correct markings and controls for classified and restricted distribution data and TOs IAW the program’s Security Classification Guide (SCG) and Department of Defense Manual (DODM) 5200.01, Department of Defense Instruction (DODI) 5230.24, Department of Defense Directive (DODD) 5230.25, Air Force Instruction (AFI) 16-1404, and MIL-STD-38784 (available at http://www.e-publishing.af.mil/ or https://assist.dla.mil/online/start/index.cfm). The markings and notices shall be reviewed during In-Process Reviews (IPR). The Contractor shall also apply policy and procedures for Cyber Security Protection IAW AFI 33-200, Information Assurance (IA) Management, AFMAN 17-1301, Computer Security (COMPUSEC), and MPTO 00-33B-5008, Remanence Security for Information Systems. NOTE: Distribution limitations will be determined on a case-by-case basis as TOs are developed, dependent upon TO content.

10. TO Quality(T). The Contractors shall ensure prepared TOs are: a) technically accurate and safe; b) written to a scope and depth of coverage to support the operations and maintenance concepts; c) properly classified and marked with export control and distribution limitation statements.

10.1. Initial Technical Order Guidance Conference (TOGC)(T). Working through the TOMA, the Contractor shall co-host and participate in a guidance conference for this effort. The TOGC will be held within 60 calendar days after contract award. The Contractor shall present a briefing on their interpretation of the basic contract, SOW/Performance Work Statement (PWS), CDRLs, (DIDs), MIL-SPEC, MIL-STD, SIRs, this document and the planned preparation and delivery of the TOs and related data.

10.2. In-Process Reviews(T). The Contractor shall participate and co-chair In-Process Reviews (IPR) of the data developed for this effort. In-Process Reviews are to ensure that data being developed as part of this effort is adequate and accurate and IAW contract requirements and cited specifications. The Contractor shall support IPRs with technical writers, engineers and QA personnel. IPRs will be held IAW TO 00-5-3 or as defined by the program office. With prior approval of the TOMA, IPRs may be combined.

10.3. TO Delivery Requirements for In-Process Reviews(T). Delivery requirements are contained in Section 2, Table 3 of the TMCR.

10.4. TO Certification. The Contractor shall certify that new TO procedures and data developed to support the program are accurate, adequate, current, safe, and usable for their intended purpose. The Government may witness the certification activities. The Contractor shall incorporate comments generated by the certification process into the TOs prior to submitting the TOs for verification. At the completion of the certification, the Contractor shall submit a letter to the TOMA through the Government PCO and PM stating that certification has been completed, the certification method used, and that any deficiencies identified during the process have been corrected. The Contractor will ensure all necessary changes and corrections to affected manuals are accomplished in time to meet contract delivery schedule requirements. The Contractor shall notify the Government at least 180 days prior to the need date of any Government Furnished Information/Government Furnished Equipment (GFI/GFE) required to perform certification tasks. TO 00-5-1 and TO 00-5-3 shall be referenced for additional information on TO Certification requirements.

10.4.1. The Contractor shall propose opportunities to perform TO certification activities in conjunction with Government verification IAW TO 00-5-3, where applicable.

10.5. Verification Support(T). The Contractor shall support Government verification activities as required by the TOMA and the program Technical Order Life Cycle Verification Plan (TOLCVP).

Contractor verification support will consist of on station technical writing and engineering support as required.

10.6. TO Prepublication Reviews (PPR)(T). N/A

10.7. Technical Data Assessment (TDA)(T). N/A

10.7.1. MIL-SPEC (SGML) TO Data(T). N/A

10.7.2. Error Resolution(T). N/A

11. TO Delivery. TO file delivery requirements are located in Section 2, Table 3 of this document.

11.1. MIL-SPEC (SGML) Tagged Files(T). N/A

12. Source Data Maintenance(T). Contractors shall maintain accuracy, currency and configuration of TO source data, to include GFI, throughout the contract period of performance.

13. TO Maintenance(T). N/A

14. Schedules(T). Any changes to the TM Schedule and Status after the TO Guidance Conference shall be coordinated with and approved by program TOMA and PCO.

15. Time Compliance Technical Orders (TCTOs)(T). N/A

15.1(T). N/A

15.2(T). N/A

15.3(T). N/A

15.4(T). N/A

16. PROGRAM SPECIFIC REQUIREMENTS(T).

a. The Offeror shall develop and deliver Commercial Off The Shelf (COTS) technical manuals IAW Section 2, Table 1, covering the:

1) Operation and Maintenance Instructions Manual with combined IPB

2) COTS manuals shall meet the requirements of paragraph 3 and sub-paragraphs. (Sample Government Purpose License Agreement provided in attachment 4)

b. The Offeror shall develop Updates to the existing manuals listed in Section 2, Table 2 in the form of:

1) Revisions to existing manuals.

c. The manual(s) shall be evaluated using the latest version of the development specifications listed in Tables 1 and 2 of this document. Data delivered for this contract shall be digital files in PDF format.

d. In-Process reviews shall be held at the discretion of the ES and TOMA for each manual under development.

SECTION 2. TM TYPE AND DELIVERY REQUIREMENTS

NOTES:

Mark the TM Type Selection Tables indicating the applicable TO types and related specifications.

(NEW DEVELOPMENT) LINEAR TM TYPE (PUBLICATION) SELECTION TABLES.

TABLE 1

TMSS REQUIREMENTS FOR THE SENIOR LEADER IN-TRANSIT CONFERENCE

CAPSULE (SLICC) and SENIOR LEADER IN-TRANSIT PALLET (SLIP) Program

(System/Component)

Title or Type of Manuals Specification Required

1. Commercial Manuals (Evaluate according to MIL-PRF-32216)

TABLE 2

SUSTAINMENT/MODIFICATION UPDATES TM TYPE SELECTIONS

NOTES:

Check all applicable boxes.

For existing manuals not being updated to latest specification requirements, enter “Same style and format” under the specification heading.

TO Number, Title, or

Type of Manual

Specification

Change

Revision

Supple-ment

Supple-mental

TM

Source Data

1. 35D33-2-11-1

MIL-PRF-

32216

2. 35D33-2-12-1 MIL-PRF-

32216

TABLE 3 – LINEAR TM DELIVERY REQUIREMENTS

FOR

SENIOR LEADER IN-TRANSIT CONFERENCE CAPSULE (SLICC) AND SENIOR LEADER

IN-TRANSIT PALLET (SLIP)

(System/Item)

NOTES:

For Paper media delivery indicate required quantity For all other media types indicate (Y)es or (N)o TCTO requirements are specified in the contract vehicle approving the TCTO.

If “Other” is selected, define media type and quantities: ________________

DELIVERY SCHEDULE

Event Number of days data required prior to event In Process Review(s) (30 Days)

Verification

( Days)

Prepublication Review

( Days)

Final TO Distribution (30 Days)

Enter physical mailing address, electronic delivery location or web access point

406 SCMS/GUEE

ATTN: Chris Morris 235 Byron St., Suite 19A Robins AFB, GA 31098-1670

Final delivery due 30 days prior to production hardware delivery to USAF.

Paper/

SGML/

IPDF / Y

XML /

Other/

Paper/

SGML/

IPDF /

XML /

Other/

Paper/

SGML/

IPDF /

XML /

Other/

Paper/

SGML/

IPDF / Y

XML /

Other/

Total PDF Copies Required: 1 1

SECTION 3. SPECIFICATION/STANDARD INTERFACE RECORDS (SIRS)

N/A

ATTACHMENT 1

Graphics Format Guidelines

ATTACHMENT 2

REQUEST FOR TECHNICAL ORDER NUMBER

Attachment 3

Attachment 4

Sample Government License Agreement

Contractor’s Letter Head Date

From: Company Name

To: 406 SCMS/GUEE 235 Byron St., Suite 19A Robins AFB, GA 31098-1670

Subject: Government License Agreement

NAME OF CONTRACTOR assigns to the U.S. Government under contract XXXXX-XX-X-XXXX, Government License Rights, which allow for the electronic storage, use, printing, release and/or disclosure of the technical data contained herein. These rights extend to U.S. governmental agencies only and may not to be sold, disclosed or otherwise provided to any other entity/entities outside of the U.S. Government without written permission from the Original Equipment Manufacturer (OEM). This license shall remain in effect for as long as the equipment cited in the technical manual remains in service and under government control and usage, after which this license is revoked.

Signed and dated by the contractor

Sample: Unlimited Rights GPLA

NAME OF CONTRACTOR assigns to the U.S. Government under contract XXXXX-XX-X-XXXX, Unlimited License Rights to, use, modify, reproduce, release, perform, display, or disclose technical data for (xxxxx enter hardware item or PN). This license shall remain in effect for as long as the equipment cited in the technical manual remains in service and under USG control and usage, after which this license is revoked.

Signed and dated by the contractor

(NOTE: Limited Rights license may be tailored to include FMS customers if OEM has no objections.)

ATTACHMENT 5

IPR Completion Percentage Guide General Style & Format manuals

ATTACHMENT 6

Sample Work Package Format IPR Completion Chart

ATTACHMENT 7

AFTO FORM 158