EDL-Rev_8.pdf

NOTICE TO ACCOMPANY THE DISSEMINATION OF

EXPORT- CONTROLLED TECHNICAL DATA

If you print or display an abstract df any unclassified report marked EXPORT CONTROL, the following notice applies.

1. Export of information conta~ned herein, which includes, in some circumstances, release io foreign nationals within the United States, without first obtaining approval or license &om the Department of State for items controlled by the International Traffic in I

Arms Regulations (ITAR), or the Department of Commerce for items conkolled by the I

Export Administration Regulat~ons (EAR), may constitute a violation of law.

2. Under 22 U.S.C. 2778 the penalty for unlawful export of rtems or information I controlled under the ITAR is up to 2 years imprisonment, or a fine of $100,000, or both.

Under 50 U.S.C., Appendix 2410, tl~e penalty for unlawful export of items or informa-tion controlled under the EAR is a fine of up to $1,000,000, or five times the value of the exports, wl~~cl~ever is greater; or for an individual, imprisonment of up to 10 years, ;

or a fine of up to $250,000, or both. I

3. In accordance with your certification that establishes you as a "qualified U.S.

contractor," unauthorized dissemination of this information is prohibited and may result I

:,:I in disqualification as a qualified U.S. contractor, and may be considered in determining your eligibility for future conbcts with the Department of Defense.

4. The U.S. Government assumes no liability for direct patent infringement, or con-tributory patent inliingernent or misuse of technical data. ..

5. The U.S. Government does not warrant the adequacy, accuracy, currency, or completeness of the technical data.

6. The U.S. Govern~nent assumes no liability for loss, damaEe;or injury resulting from manufacture or use for any purpose of any product, article, system, or material in-volving reliance upon any or all technical d a ~ furnished in response to the request for technical data.

7. If the technical data fumjslled by the Government will be used for commercial lnanufac tu~g or other profit potential, a hcense for such use may be necessary. Any payments made in support of the request for data do not include or involve any license rights.

8. A copy of this notice shall be provided with any partial or complete reproduction of these data that are provided to qualified U.S. contractors.

10 U.S.C. 140c @OD Directive 5230.25 (Encl5)

ENGINEERING DATA LIST

DATE:

17 OCT 2022

REVISION: 8 *HISTORY*

CAGE:

88277

PAGE:

NSN:

1730015346421BA

DATA TECH:

Cardali, David S

END ITEM:

C-17 AIRCRAFT

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMACA/

MANUFACTURER NAME:

THE BOEING COMPANY

REFERENCE NUMBER:

17G013043-501

NOUN:

TOWBAR,AIRCRAFT

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

NR

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 88277 17G013043 M S D TOWBAR, AIRCRAFT Cardali, David S 17 OCT 2022

(-501) CONFIGURATION.

SPECIFICATION CONTROL DRAWING.

NAME: DATE:

L 88277 17G013043 PL M S D TOWBAR, AIRCRAFT Cardali, David S 17 OCT 2022

PARTS LIST

NAME: DATE:

L 88277 DPS1.001 J S D DOUGLAS PROCESS

STANDARDS (DPS) AND

SUPPLEMENTAL

L 98752 200415485 E S A GENERAL ENGINEERING

NOTES

Cardali, David S 17 OCT 2022

NOTES 1,3,12,17 AND 18 APPLY.

NAME: DATE:

STANDARD ENGINEERING TEXT

Cardali, David S 17 OCT 2022

FOR GENERAL ENGINEERING DOCUMENT NOTES, SEE DOCUMENT NUMBER 200415485.

SPARES CONFIG: PER B/P.

NAME: DATE:

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

FURNISHED METHOD CODE LEGEND:

Page 1 of 1EDL Version 8Generated by PRPS using Jasper Reports on 14 Mar 2024