FA852320R0040final.pdf
PDF 874 KB Posted
- Solicitation number
- FA852320R0040
About this file
This final Request for Proposal solicits engineering and technical services and supplies for the sustainment, modification, and update of the AN/ALQ-172(V) Countermeasures System. Products and services include engineering support, materials, data, and travel. Responses are due October 19, 2020 with award anticipated within 10 months. The Air Force Materiel Command Lifecycle Management Center at Robins Air Force Base will issue task orders against the Indefinite Delivery Indefinite Quantity contract over 10 years. Offerors must meet the $15M minimum and pricing will be on a cost-plus or firm-fixed basis depending on the requirement.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| GFPAttachment.pdf | ||
| ALQ172SCGFebruary2018.pdf | ||
| CDRLs10Jul2020.pdf | ||
| AppendixE.pdf | ||
| StatementofWork.pdf | ||
| DD254ContractSecurityClassificationSpecification.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 1447 (REV. 8/2016)
PREVIOUS EDITION NOT USABLE Prescribed by GSA - FAR (48 CFR) 53.214(d)
23. ACCOUNTING AND APPROPRIATION DATA
SEE SCHEDULE
24. TOTAL AWARD AMOUNT (For Government Use Only)
TELEPHONE NUMBER
UNIQUE ENTITY
IDENTIFIER
CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER
NO COLLECT CALLS
4. SOLICITATION NUMBER
FA8523-20-R-0040
6.SOLICITATION ISSUE DATE
8. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR
SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS (WOSB)
ELIGIBLE UNDER THE WOSB PROGRAM
HUBZONE SMALL
BUSINESS EDWOSB
SERVICE-DISABLED VETERAN-
OWNED SMALL BUSINESS NAICS: 334511
8(A) SIZE STANDARD: 1,250
DATE SIGNED
28. UNITED STATES OF AMERICA (Signature of Contracting Officer)
26. AWARD OF CONTRACT: YOUR OFFER ON SOLICITATION NUMBER
SHOWN IN BLOCK 4 INCLUDING ANY ADDITIONS OR CHANGES WHICH
ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:
ROUTINE
Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 120 days.
SEE LINE ITEM SCHEDULE
22.
AMOUNT
16. AUTHORITY FOR USING OTHER THAN 10 USC 2304 41 USC 253
FULL AND OPEN COMPETITION (c) (1 ) (c) ( )
DATE SIGNED
27. SIGNATURE OF OFFEROR/CONTRACTOR
20.
UNIT
21.
UNIT PRICE
19.
QUANTITY
13. CONTRACTOR OFFEROR CODE FACILITY CODE
11. IF OFFER IS ACCEPTED BY THE GOVERNMENT WITHIN * ___ CALENDAR DAYS (60 CALENDAR
DAYS UNLESS OFFEROR INSERTS A DIFFERENT PERIOD) FROM THE DATE SET FORTH IN BLOCK 9
ABOVE, THE CONTRACTOR AGREES TO HOLD ITS OFFERED PRICES FIRM FOR THE ITEMS
SOLICITED HEREIN AND TO ACCEPT ANY RESULTING CONTRACT SUBJECT TO THE TERMS AND
CONDITIONS STATED HEREIN. *120
RATING
DO: A1
3. AWARD/EFFECTIVE DATE
FA8523
2. CONTRACT NUMBER
X
17.
ITEM NUMBER
12. ADMINISTERED BY CODE
Total
SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK: 14
SCD:B
NAME AND TITLE OF SIGNER (Type or Print) NAME OF CONTRACTING OFFICER
5. SOLICITATION TYPE
SEALED BIDS NEGOTIATED
(IFB) (RFP)
15. PROMPT PAYMENT DISCOUNT
25. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 1
COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SETFORTH
OR OTHERWISE IDENTIFIED ABOVE AND ON ANY CONTINUATION SHEETS SUBJECT
THE TERMS AND CONDITIONS SPECIFIED HEREIN.
10. ITEMS TO BE PURCHASED (Brief Description)
SUPPLIES SERVICES Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
9. (Agency Use)
Offers will be received at the issuing office until the date and time specified below. All official United States Postal Service mail and classified material will be delivered to the address shown in block 7. Deliver all parcels to: AFLCMC/WNKD Attn: Buyer named above 235 Byron Street, Suite 19A Robins AFB, GA 31098-1611
19-OCT-2020 4:00PM EST
X
18.
SCHEDULE OF SUPPLIES/SERVICES
14. PAYMENT WILL BE MADE BY CODE
X
CODE7. ISSUED BY
ELECTRONIC WARFARE/EW, AFLCMC/WNKD
235 BYRON ST STE 19A
BLDG 301 CML PHN 478 926 0883
ROBINS AFB GA 31098-1670
BUYER: Desura R. Gates desura.gates.1@us.af.mil Phone: (478) 926- 0883 FAX: (000) 000-0000
X
1. THIS CONTRACT IS A RATED ORDER
UNDER DPAS (15 CFR 700)SOLICITATION/CONTRACT
BIDDER/OFFEROR TO COMPLETE BLOCKS 11, 13, 15, 21, 22, & 27.
JSU
STANDARD FORM 1447 (REV. 8/2016) BACK
NO RESPONSE FOR REASONS CHECKED
TYPE OR PRINT NAME AND TITLE OF SIGNER
SIGNATURENAME AND ADDRESS OF FIRM (Include Zip Code)
WE DO NOT DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF
ITEMS INVOLVED
WE DO
OTHER (Specify)
UNABLE TO IDENTIFY THE ITEM(S)
CANNOT COMPLY WITH SPECIFICATIONS CANNOT MEET DELIVERY REQUIREMENT
DO NOT REGULARILY MANUFACTURE OR SELL THE TYPE
OF ITEMS INVOLVED
DATE AND LOCAL TIME
SOLICITATION NUMBER FA852320R0040
FROM: AFFIX
STAMP
HERE
TO:
ATTN: Desura R Gates/WWQKA
EAGLE (F-15), AFLCMC/WWQK
235 BYRON ST STE 19A
BLDG 300 CML PHN 478 926 3358
ROBINS AFB GA 31098-1670
FA8523-20-R-0040
PART I - THE SCHEDULE
SECTION B
SUPPLIES OR SERVICES AND PRICES/COSTS
CONTRACT TYPE: This Request for Proposal (RFP) is issued with the intent to establish an Indefinite Delivery, Indefinite Quantity (IDIQ) type contract for the ALQ-172 sustainmnet and AFGSC ALQ-172 Modernization Options. This contract utilizes Cost Plus Fixed Fee (CPFF), Cost Reimbursement No Fee (CRNF), and Firm Fixed Price (FFP) Contract Line Items (CLINs) . Each CLIN indicates the type used for each particular requirement.
OPTION PERIODS: In accordance with the clause in Section I of this contract, FAR 52.217-9, Option to Extend the Term of the Contract, orders may be issued hereunder for a period of ten (10) years from the effective date of the contract against the Contract Line Item Numbers (CLINs) included in the schedule.
Orders issued hereunder shall utilize the CLIN representing the period in effect at the time of order award for purposes of pricing. The option periods associated with each CLIN series are defined as follows:
000X-Contract Award through 10 months after contract award 100X-10 months after contract award through 24 months after contract award 200X-24 months after contract award through 36 months after contract award 300X-36 months after contract award through 48 months after contract award 400X-48 months after contract award through 60 months after contract award 500X-60 months after contract award through 72 months after contract award 600X-72 months after contract award through 84 months after contract award 700X-84 months after contract award through 96 months after contract award 800X-96 months after contract award through 108 months after contract award 900X-108 months after contract award through 122 months after contract award
AUTHORITY TO ISSUE ORDERS: Only the AFLCMC/WNKD Contracting Officer may issue orders under this contract.
PLACE OF PERFORMANCE: Performance of orders issued hereunder shall be in accordance with individual delivery orders. ACRN, Purchase Request, PR Line Item and Period of Performance to be cited on each delivery order issued hereunder. The PR line items reflected below are for the purposes of establishing the CLIN structure for this IDIQ contract. The effective period of this contract begins on the date of contract award and ends on the date following the date of final payment under this contract.
MINIMUM/MAXIMUM VALUE: In accordance with the clause 52.216-19 in Section I of this contract, the contractor shall furnish to the Government, when and if ordered, the items of supplies or services specified in this Schedule up to and including the "Maximum" amount of $947,292,440.00 for all orders issued hereunder. The Government shall order at least the "Minimum" amount of $15,000,000.00 in conjuction with award of the basic contract.
GOVERNMENT FURNISHED PROPERTY (GFP): GFP is currently tracked under contract FA8540-14-D-0002 and will be transferred to this resultant contract. No additional GFP will be provided. GFP Attachment in Section J is for solicitation purposes only.
ENHANCEMENT OPTIONS:
A) The resultant contract will include Enhancement Options. The Enhancement Options are for the accomplishment of the AFGSC ALQ-172 Modernization. The CLINs and subCLINs for these options shall remain the same throughough the contract period and may be exercised in part or in whole, from time to time during the contract period of performance. The list below includes the five (5) AFGSC Enhancement Options.
Option 11-Stand-off Emitter Option 12- 4-Man Crew Phase I Option 13- Stand-off Sensor Replacement Option 14- 4-Man Crew Phase 2 Option 15- Infrastructure RE-host (IFR)
B) PRODUCTION CLINs: For Contract Line Item Numbers (CLINs) 1101AA, 1101BA, 1102, 1103, 1104;
1201, 1203, 1204AA, 1204BA, 1205AA, 1205BA; 1301, 1303; 1401, 1403; and 1501, 1503, the offeror shall propose quantity/price ranges within the estimated quantities. The proposed quantity/price ranges shall reflect either 1) a range of 1 to the estimated quantities--OR, 2) multiple quantity ranges up to the estimated quantities. The offeror shall ensure that the proposed quantity/price ranges are clearly marked as to the line item that such applies (i.e CLIN 1101AA, 1201, 1303, etc). Proposed ranges shall cover all quantities from 1 each to the estimated quantities; however, proposed quantities shall not exceed the estimated quantities.
BASIC CONTRACT PERIOD: The basic contract period shall be in effect from the effective date of the contract for a period of 10 months.
Basic Period
ENGINEERING SERVICES-NON-BLOCK CYCLE
Item No.
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost
1 LO
R425 Engineering Services - Non-Block Cycle Engineering Services IAW SOW Section 2.1.1, 2.1.2.8, 2.1.3, 3.1, and 3.2.1 thru 3.2.10. Specific Engineering tasks will be attached to individual orders.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) *ARO Each
Individual Order Req No / Pri
Required Period of Performance
1 LO *10 Months
Proposed Period of Performance
1 LO
ENGINEERING SERVICES-BLOCK CYCLE
Item No.
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost
1 LO
R425 Engineering Services - Block Cycle Engineering Supplies IAW SOW Section 2.1.2, 2,1,3, 3.1, and 3.2.1 thru 3.2.10. Specific Engineering tasks will be attached to individual orders. CDRLS will change on Orders Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *24 Months
Proposed Period of Performance
1 LO
ENGINEERING SUPPLY-SES
Item No.
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost
1 LO
R425 Engineering Supply - SES Engineering Supplies IAW SOW Section 2.1.5 and 3.2.1 thru 3.2.10. Specific Engineering tasks will be attached to individual orders Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) *ARO Each
Individual Order Req No / Pri
Required Period of Performance
1 LO *12 Months
Proposed Period of Performance
1 LO
MATERIALS
Item No.
Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost
1 LO
R425 Material Materials in support of the Laboratory and Equipment Maintenance IAW SOW Section 3.1
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
+ TBC 1 LO *24 Months
Proposed Period of
MATERIALS
+ TBC 1 LO
DATA AND REPORTS
Item No.
Not Separately Priced Quantity U/I Unit Price
1 LO NSP
DATA
DATA AND REPORTS
The contractor shall furnish data in support of ALL CLINS in accordance with the Contract Data Requirements List (CDRL, DD Form 1423), Exhibit A and in accordance with the SOW. The price of the data exhibit line items included hereunder are included in the price of ALL CLINs and are Not Separately Priced (NSP).
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
+ TBC 1 LO *24 Months
Proposed Period of Performance
+ TBC 1 LO
CDRL Data Item
Description (DID)
DID Title SOW Reference
A001 DI-MGMT-80368A Monthly Status Report 2.1.1
A002 DI-FNCL-80331A Funds and Man-Hour Expenditure Report 2.1.1
A003 DI-MISC-81384 Service Engineering Report 2.1.1.1; 2.1.5.2.1
A004 DI-MISC-81384 Service Engineering Report 2.1.1.2; 2.1.5.2.2
DATA AND REPORTS
A005 DI-MISC-80048 Scientific and Technical Reports
Summary
2.1.2; 2.1.4
A006 DI-IPSC-81427A Software Development Plan 2.1.2.2; 2.1.4.1
A007 DI-IPSC-81438A Software Test Plan 2.1.2.2
A008 DI-MGMT-81334D Contract Work Breakdown Structure 2.1.2.2; 2.1.4.1
A009 Reserved
A00A DI-IPSC-81431A System/Subsystem Specification 2.1.1.3
A00B DI-IPSC-81433A Software Requirements Specification 2.1.2.4; 2.1.4.2
A00C DI-IPSC-81434A Interface Requirements Specification 2.1.2.4
A00D DI-IPSC-81435A Software Design Description 2.1.2.5; 2.1.4.3
A00E DI-IPSC-81436A Interface Design Description 2.1.2.5
A00F DI-IPSC-81437A Database Design Description 2.1.2.5
A00G DI-IPSC-81439A Software Test Description 2.1.2.5; 2.1.4.3
A00H DI-IPSC-81488 Computer Software Product 2.1.2.6; 2.1.4.4
A00J DI-IPSC-81440A Software Test Report 2.1.2.6; 2.1.4.4
A00K DI-IPSC-81440A Software Test Report 2.1.2.7; 2.1.4.5
A00G DI-IPSC-81439A Software Test Description 2.1.3.1
A00L DI-IPSC-81441A Software Product Specification (SPS) 2.1.3.3; 2.1.4.6
A00M DI-IPSC-81442A Software Version Description (SVD) 2.1.3.3; 2.1.4.6
A00N DI-IPSC-81443A Software User Manual (SUM) 2.1.3.3
2.1.4.6
A00P DI-SESS-81646 Configuration Audit Plan 2.1.3.4
A00Q DI-CMAN-81022C Configuration Audit Summary Report 2.1.3.5
A00R DI-MISC-80751 English Language Test Design Document
(ELTD)
2.1.4.6
B001 DI-MISC-80508B Technical Report-Study/Service 2.2.1.3
2.2.2.6
2.2.3.8.7
2.2.9.3.3
B002 DI-NDTI-80809B Test/Inspection Report 2.2.1.3
2.2.1.5
2.2.6.9
2.2.6.12
B003 DI-MISC-80711A Scientific and Technical Reports 2.2.1.4
B004 DI-NDTI-80566A Test Plan 2.2.1.5
B005 DI-NDTI-80603A Test Procedure 2.1.2.7
2.2.1.5
2.2.6.9
2.2.6.12
2.2.6.16
B006 DI-MGMT-81501A Weight and Balance Report for Aircraft 2.2.1.6
B007 DI-QCIC-81536 Test Information Sheet 2.2.2.3
B008 DI-IPSC-81427A Software Development Plan (SDP) 3.2.13
B009 DI-IPSC-81443A Software User Manual (SUM) 2.2.3.4.4
2.2.3.4.6
2.2.9.3.7
2.7.3.2.1
3.1.1.3.2
C001 DI-MCCR-80700 Computer Software Product End Items 2.2.1.7
2.2.2.17
2.2.7.1
2.2.9.3.7
2.7.1.8
2.7.5.1
3.1.1.1.8
C002 DI-TMSS-80527C Commercial Off-The-Shelf (COTS)
Manuals and Associated Supplemental
Data
2.2.1.7
2.2.3.4.6
2.2.7.1
2.7.3.1
2.7.5.1
3.1.1.3.1
C003 DI-ADMN-81249A Conference Agenda 2.2.2.7
2.2.2.8
2.2.2.9
2.2.2.10
2.2.2.11
2.2.2.18.1
2.2.2.18.2
2.2.2.18.3
2.2.2.18.4
2.2.2.18.5
2.2.2.18.6
2.2.3.1.1
2.2.3.1.2
2.2.3.8.4
2.2.6.18
2.2.6.19
2.2.10
2.3.2.3
2.7.1.9.1
2.7.1.9.2
2.7.1.9.3
2.7.6.5
2.7.6.6
3.1.1.1.9.1
3.1.1.1.9.2
3.1.1.1.9.3
3.2.3
3.2.4
3.2.5
C004 DI-ADMN-81373 Presentation Material 2.2.1.9.4
2.2.2.7
2.2.2.8
2.2.2.9
2.2.2.10
2.2.2.11
2.2.2.18.1
2.2.2.18.2
2.2.2.18.3
2.2.2.18.4
2.2.2.18.5
2.2.2.18.6
2.2.3.1.1
2.2.3.1.2
2.2.3.8.4
2.2.6.18
2.2.6.19
2.2.9.3.2
2.2.10
2.3.2.3
2.7.1.9.1
2.7.1.9.2
2.7.1.9.3
2.7.6.5
2.7.6.6
3.1.1.1.9.1
3.1.1.1.9.2
3.1.1.1.9.3
3.2.3
C005 DI-ADMN-81250A Conference Minutes 2.2.2.7
2.2.2.8
2.2.2.9
2.2.2.10
2.2.2.11
2.2.2.18.1
2.2.2.18.2
2.2.2.18.3
2.2.2.18.4
2.2.2.18.5
2.2.2.18.6
2.2.3.1.1
2.2.3.1.2
2.2.3.8.4
2.2.6.18
2.2.6.19
2.2.10
2.3.2.3
2.7.1.9.1
2.7.1.9.2
2.7.1.9.3
2.7.6.5
2.7.6.6
3.1.1.1.9.1
3.1.1.1.9.2
3.1.1.1.9.3
3.2.3
3.2.4
3.2.5
C006 Reserved
C007 Reserved
C008 Reserved
C009 DI-ILSS-81495 Failure Mode, Effects, and Criticality
Analysis Report
2.2.2.1
C00A DI-IPSC-81431A System/Subsystem Specification (SSS) 2.2.2.12
2.7.1.2
3.1.1.1.2
C00B DI-SESS-81314A System/Segment Interface Control
Specification
2.2.2.13
2.7.1.3
3.1.1.1.3
C00C DI-IPSC-81434A Interface Requirements Specification
(IRS)
2.2.2.14
2.7.1.4
3.1.1.1.4
C00D DI-IPSC-81433A Software Requirements Specification
(SRS)
2.2.2.15
2.7.1.5
3.1.1.1.5
C00E DI-IPSC-81432A System/Subsystem Design Description
(SSDD)
2.2.2.16
C00F DI-IPSC-81441A Software Product Specification (SPS) 2.2.3.4.1
2.2.3.4.4
2.2.3.4.6
2.2.3.6
2.2.6.8
2.7.3.2.1
2.7.3.2.2
3.1.1.3.2
C00G DI-IPSC-81435A Software Design Description (SDD) 2.2.3.4.1
2.2.3.4.4
2.2.3.4.6
2.7.3.2.1
3.1.1.3.2
C00H DI-IPSC-81442A Software Version Description (SVD) 2.2.3.4.1
2.2.3.4.4
2.2.3.4.5
2.2.3.4.6
2.2.3.6
2.2.6.8
2.2.9.3.7
2.7.3.2.1
2.7.3.2.2
3.1.1.3.2
C00J DI-IPSC-81447A Computer Programming Manual (CPM) 2.2.3.4.2
C00K DI-IPSC-81448B Firmware Support Manual 2.2.3.4.3
C00L DI-IPSC-81437A Database Design Description (DBDD) 2.2.3.4.4
2.2.3.4.5
2.2.3.6
2.2.6.8
C00M DI-IPSC-81633 Software Programmer’s Guide 2.2.3.4.4
C00N Reserved
C00P DI-NDTI-80566A Test Plan 2.2.6.1
C00Q DI-SESS-81315B Failure Analysis and Corrective Action
Report (FACAR)
2.2.6.2
C00R DI-NDTI-80603A Test Procedure 2.2.6.3
2.2.6.4
2.2.6.6
2.2.6.13
2.2.6.14
2.2.6.17
2.7.6.1
C00S DI-NDTI-80809B Test/Inspection Report 2.2.6.3
2.2.6.4
2.2.6.7
2.8.1.2
2.2.6.10
2.2.6.13
2.2.6.14
2.2.6.17
2.2.8
2.7.6.2
3.1.1.6.2
C00T DI-NDTI-81585A/T Reliability Test Plan 2.2.6.5
C00U DI-TMSS-81586A/T Reliability Test Reports 2.2.6.5
C00V DI-ATTS-80284B Test Program Set Documentation (TPSD) 2.2.6.8
2.7.3.2.2
C00W DI-ATTS-80282B Test Program Set (TPS) and Operational
Test Program Set (OTPS) Acceptance
Test Procedures (ATPS)
2.2.6.8
2.7.6.3
C00X DI-ATTS-80283B Test Program Set (TPS) Acceptance Test
Report (ATR)
2.2.6.8
2.7.6.3
C00Y DI-IPSC-81438A Software Test Plan (STP) 2.2.6.11
2.7.6.4
3.2.21.7.5.6
C00Z DI-IPSC-81439A Software Test Description (STD) 2.2.6.11
2.7.6.4
C0A1 DI-IPSC-81440A Software Test Report (STR) 2.2.6.11
2.7.6.4
3.2.21.7.5.6
C0A2 DI-EMCS-81541B Electromagnetic Environmental Effects
(E3) Verification Procedures (E3VP)
2.2.6.15
C0A3 DI-EMCS-81542B Electromagnetic Environmental Effects
(E3) Verification Report (E3VR)
2.2.6.15
C0A4 DI-ILSS-80872 Training Materials 2.2.9.1
2.2.9.2
2.7.7
3.1.1.7
C0A5 DI-ALSS-81535 Deficiency Report (DR) 2.2.9.3.4
C0A6 DI-MGMT-80258A Material Improvement Project Report 2.2.9.3.4
C0A7 DI-RELI-81496 Reliability and Maintainability (R&M)
Block Diagrams and Mathematical
Models Report
2.2.1.10
D001 DI-SESS-81000E/T Product Engineering Design Data and
Associated Lists
2.2.3.1
2.2.3.1.5
2.2.3.3
2.2.3.8.5
3.2.14.6
3.2.14.7
2.7.2.1
3.1.1.2.1
E001 DI-SESS-81254B Request for Nomenclature (DD Form 61) 2.2.3.3
E002 DI-SESS-80294B Maintenance Test and Support
Equipment List
2.2.1.9.1
E003 DI-ILSS-80454 Support Equipment Installation Data
(SEID)
2.2.1.9.2
E004 DI-MGMT-81836 Facilities Requirements Document
(FRD)
2.2.1.9.3
E005 DI-MISC-81113 Radar Spectrum Management (RSM)
Test Plan
2.2.6.16
E006 DI-EMCS-81827 Spectrum Certification Spectral
Characteristics Data
2.2.6.16
E007 DI-ATTS-80041A Test Requirements Document (TRD) 2.2.3.8.7.1
2.7.2.3
E008 DI-QCIC-80278B Calibration/Measurements Requirements
Summary
2.2.3.8.7.2
E009 DI-SESS-81646 Configuration Audit Plan 2.2.6.18
2.2.6.19
E00A DI-MGMT-80368A Status Report 2.2.9.3
2.3.2.4
2.4.3.1
3.2.13
E00B DI-SESS-81785 Systems Engineering Management Plan
(SEMP)
2.3.2.5
3.1.1.8
E00C DI-MISC-80508B Technical Report-Study/Service 2.3.1
F001 DI-MGMT-81453A Data Accession List (DAL) 2.2.1.2
2.4.3.3
3.2.10
3.2.14.5.2
3.2.16
3.2.21.7.5.9
G001 DI-CMAN-80858B Supplier's Configuration Management
Plan
3.2.14.1
G002 DI-CMAN-80639D Engineering Change Proposal 3.2.14.2
G003 DI-CMAN-80642D Notice Of Revision (NOR) 3.2.14.2
G004 DI-CMAN-80640D Request for Variance (RFV) 3.2.14.3
G005 DI-ADMN-81401B Contract Change Proposals (CCPs) 3.2.14.4
G006 DI-SDMP-81748/T Parts Management Plan 3.2.14.5
G007 DI-MISC-81832 Counterfeit Prevention Plan 2.7.8
3.1.1.8
3.2.14.5.2
3.2.21.7.5.5
G008 DI-QCIC-80126B Government Industry Data Exchange
Program (GIDEP) Alert Response
3.2.14.5.2
3.2.21.7.5.5
G009 Reserved
G00A DI-MFFP-81403 Corrosion Prevention and Control Plan 3.2.19
G00B Reserved
G00C DI-ADMN-81306 Program Protection Implementation Plan
(PPIP)
3.2.21.7
G00D DI-MISC-82256/T Supply Chain Risk Management Plan 3.2.21.7.8
G00E DI-MGMT-80377 Government Furnished Equipment Detail
Transaction Status Data
3.2.22
4.2.1
G00F DI-MGMT-81772 Lead-Free Control Plan 3.3
H001 DI-MGMT-81861B Integrated Program Management Report
(IPMR)
2.2.2.2
2.3.2.2
3.2.9
2.7.1.9
3.1.1.1.9
H002 DI-MGMT-80004A/T Management Plan 2.2.2.2
2.3.2.2
J001 DI-MGMT-81255 Production Status Report 3.2.6
K001 DI-MGMT-81808 Contractor's Risk Management Plan 2.2.1.11
K002 DI-MGMT-81809 Risk Management Status Report 2.2.1.11
L001 DI-SESS-81758A/T Logistics Product Data 2.2.3.8.2
L002 DI-PSSS-81716 Supplementary Provisioning Technical
Documentation
2.2.3.8.3
L003 DI-SESS-81874 Engineering Data for Provisioning
(EDFP)
2.2.3.8.3
L004 DI-SESS-81759/T Logistics Product Data Summaries 2.2.3.8.3
L005 DI-SESS-81359B Parts List 2.2.3.8.5
P001 DI-PACK 80120C Preservation And Packing Data 2.2.7.2
P002 DI-PACK 80121C Special Packaging Instructions 2.2.7.2
S001 DI-SAFT-81626 System Safety Program Plan (SSPP) 2.7.1.6
3.1.1.1.6
3.4
S002 DI-SAFT-80102B Safety Assessment Report (SAR) 2.7.1.6
3.1.1.1.6
3.4
S003 DI-SAFT-80101B System Safety Hazard Analysis Report
(SSHA)
2.7.1.6
3.1.1.1.6
3.4
S004 DI-ENVR-81375 Environmental Health and Safety Plan
(HSP)
3.4
S005 DI-MGMT-81398B Hazardous Materials Management
Program (HMMP) Plan Using NAS 411
3.4.1
T001 TM-86-01Q Technical Manual Contract Requirement
(TMCR)
2.1.3.3
2.1.4.6
2.2.3.2.1
2.2.3.2.2
T002 Reserved
T003 Reserved
X001 DI-SESS-81768 Airworthiness Certification Criteria
Report
2.2.2.2
X002 DI-SESS-81766 Airworthiness Specification 2.2.2.2
X003 DI-MISC-81241 Airworthiness Directives/Service
Bulletins/Advisory Data
2.2.2.2
X004 DI-MGMT-80004A/T Management Plan 2.2.2.2
Y001 DI-SDMP-81493/T Program-Unique Specification
Documents
2.2.1.12.1
Y002 DI-NDTI-81284 Test and Evaluation Program Plan
(TEPP)
3.2.21.7
3.2.21.7.5.1
Y003 DI-MISC-80508B Technical Report Study/Services 3.2.21.7
3.2.21.7.5.4
Y004 DI-SESS-81248 Interface Control Document (ICD) 2.2.2.14
Y005 DI-MSSM-81750 DoD Modeling and Simulation (M&S)
Accreditation Plan
3.2.21.7
Y006 DI-MSSM-81753 DoD Modeling and Simulation (M&S)
Accreditation Report
3.2.21.7
Y007 DI-MSSM-81751
DoD M&S Verification and Validation
(V&V) Plan
3.2.21.7
Y008 DI-MSSM-81752 DoD M&S V&V Report 3.2.21.7
Y009 DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.2
Y00A DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.2
Y00B DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.3
Y00C DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.4
Y00D Reserved
Y00E DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.1
3.2.21.7.5.5
Y00F DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.1
Y00G DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.1
Y00H DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.2
Y00J DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.2
Y00K DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.3
Y00L DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.4
Y00M DI-MGMT-81763 Customized Microelectronics Devices
Source Protection Plan
3.2.21.7.5.5
Y00N DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.5
Y00P DI-MGMT-81717 Information Systems Security
(INFOSEC) Anonymity Plan (IAP)
3.2.21.7.5.5
Y00Q DI-SESS-81770 System/Software Integration Laboratory
(SIL) Development and Management
Plan
3.2.21.7.5.6
Y00R DI-SESS-81343
Information Security (INFOSEC)
Boundary Configuration Management
Plan
3.2.21.7.5.6
Y00S DI-MISC-81688 Key and Certificate Management Plan
(KCMP)
3.2.21.7.5.7
Y00T DI-MGMT-81026 TEMPEST Control Plan 3.2.21.7.5.8
Y00U DI-EMCS-81683 TEMPEST Test Plan 3.2.21.7.5.8
Y00V DI-EMCS-81684 TEMPEST Test Evaluation Report 3.2.21.7.5.8
Z001 DI-MISC-80508B Technical Report-Study/Service 2.8
Z002 DI-MISC-80508B Technical Report-Study/Service 2.8.1.1
Z003 DI-NDTI-80809B Test/Inspection Report 2.8.1.2
TRAVEL
Item No.
Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost
1 LO
TRAV
Travel TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICERThe Contractor shall be reimbursed for travel expenses directly required in the performance of work hereunder or pursuant to orders in accordance with subpart 31.2 of the Federal Acquisition Regulation.
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required
TRAVEL
+ TBC 1 LO *24 Months
Proposed Period of Performance
+ TBC 1 LO
Option I: Option I shall be applicable for 12 months from the date of option exercise.
The Option may be exercised, in whole or in part, within 24 months after the date of award of the basic contract.
OPTION 1
ENGINEERING SERVICES-NON-BLOCK CYCLE
Item No.
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost
1 LO
R425 Engineering Services - Non-Block Cycle Engineering Services IAW SOW Section 2.1.1, 2.1.2.8, 2.1.3, 3.1, and 3.2.1 thru 3.2.10. Specific Engineering tasks will be attached to individual orders.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *12 Months
Proposed Period of Performance
1 LO
ENGINEERING SERVICES-BLOCK CYCLE
Item No.
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost
1 LO
R425 Engineering Services - Block Cycle Engineering Supplies IAW SOW Section 2.1.2, 2,1,3, 3.1, and 3.2.1 thru 3.2.10. Specific Engineering tasks will be attached to individual orders. CDRLS will change on Orders Class I ODS Substance Application/Use Quantity
ENGINEERING SERVICES-BLOCK CYCLE
None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *24 Months
Proposed Period of Performance
1 LO
ENGINEERING SERVICES-SES
Item No.
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost
1 LO
R425 Engineering Supply - SES Engineering Supplies IAW SOW Section 2.1.5 and 3.2.1 thru 3.2.10. Specific Engineering tasks will be attached to individual orders.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *12 Months
Proposed Period of Performance
1 LO
MATERIALS
Item No.
Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost
1 LO
R425 Material Materials in support of the Laboratory and Equipment Maintenance IAW SOW Section 3.1.
Limitations of Liability: Other Than High Value Item
MATERIALS
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection IUID Required: Yes Physical Item Markings:
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
+ TBC 1 LO *24 Months
Proposed Period of Performance
+ TBC 1 LO
DATA AND REPORTS
Item No.
Not Separately Priced Quantity U/I Unit Price
1 LO NSP
DATA
DATA AND REPORTS
The contractor shall furnish data in support of ALL CLINS in accordance with the Contract Data Requirements List (CDRL, DD Form 1423), Exhibit A and in accordance with the Statement of Work. The price of the data exhibit line items included hereunder are included in the price of ALL CLINs and are Not Separately Priced (NSP).
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
+ TBC 1 LO *24 Months
Proposed Period of
+ TBC 1 LO
DATA AND REPORTS
CDRL Data Item
Description (DID)
DID Title SOW Reference
A001 DI-MGMT-80368A Monthly Status Report 2.1.1
A002 DI-FNCL-80331A Funds and Man-Hour Expenditure Report 2.1.1
A003 DI-MISC-81384 Service Engineering Report 2.1.1.1; 2.1.5.2.1
A004 DI-MISC-81384 Service Engineering Report 2.1.1.2; 2.1.5.2.2
A005 DI-MISC-80048 Scientific and Technical Reports
Summary
2.1.2; 2.1.4
A006 DI-IPSC-81427A Software Development Plan 2.1.2.2; 2.1.4.1
A007 DI-IPSC-81438A Software Test Plan 2.1.2.2
A008 DI-MGMT-81334D Contract Work Breakdown Structure 2.1.2.2; 2.1.4.1
A009 Reserved
A00A DI-IPSC-81431A System/Subsystem Specification 2.1.1.3
A00B DI-IPSC-81433A Software Requirements Specification 2.1.2.4; 2.1.4.2
A00C DI-IPSC-81434A Interface Requirements Specification 2.1.2.4
A00D DI-IPSC-81435A Software Design Description 2.1.2.5; 2.1.4.3
A00E DI-IPSC-81436A Interface Design Description 2.1.2.5
A00F DI-IPSC-81437A Database Design Description 2.1.2.5
A00G DI-IPSC-81439A Software Test Description 2.1.2.5; 2.1.4.3
A00H DI-IPSC-81488 Computer Software Product 2.1.2.6; 2.1.4.4
A00J DI-IPSC-81440A Software Test Report 2.1.2.6; 2.1.4.4
A00K DI-IPSC-81440A Software Test Report 2.1.2.7; 2.1.4.5
A00G DI-IPSC-81439A Software Test Description 2.1.3.1
A00L DI-IPSC-81441A Software Product Specification (SPS) 2.1.3.3; 2.1.4.6
A00M DI-IPSC-81442A Software Version Description (SVD) 2.1.3.3; 2.1.4.6
A00N DI-IPSC-81443A Software User Manual (SUM) 2.1.3.3
2.1.4.6
A00P DI-SESS-81646 Configuration Audit Plan 2.1.3.4
A00Q DI-CMAN-81022C Configuration Audit Summary Report 2.1.3.5
A00R DI-MISC-80751 English Language Test Design Document
(ELTD)
2.1.4.6
B001 DI-MISC-80508B Technical Report-Study/Service 2.2.1.3
2.2.2.6
2.2.3.8.7
2.2.9.3.3
B002 DI-NDTI-80809B Test/Inspection Report 2.2.1.3
2.2.1.5
2.2.6.9
2.2.6.12
B003 DI-MISC-80711A Scientific and Technical Reports 2.2.1.4
B004 DI-NDTI-80566A Test Plan 2.2.1.5
B005 DI-NDTI-80603A Test Procedure 2.1.2.7
2.2.1.5
2.2.6.9
2.2.6.12
2.2.6.16
B006 DI-MGMT-81501A Weight and Balance Report for Aircraft 2.2.1.6
B007 DI-QCIC-81536 Test Information Sheet 2.2.2.3
B008 DI-IPSC-81427A Software Development Plan (SDP) 3.2.13
B009 DI-IPSC-81443A Software User Manual (SUM) 2.2.3.4.4
2.2.3.4.6
2.2.9.3.7
2.7.3.2.1
3.1.1.3.2
C001 DI-MCCR-80700 Computer Software Product End Items 2.2.1.7
2.2.2.17
2.2.7.1
2.2.9.3.7
2.7.1.8
2.7.5.1
3.1.1.1.8
C002 DI-TMSS-80527C Commercial Off-The-Shelf (COTS)
Manuals and Associated Supplemental
Data
2.2.1.7
2.2.3.4.6
2.2.7.1
2.7.3.1
2.7.5.1
3.1.1.3.1
C003 DI-ADMN-81249A Conference Agenda 2.2.2.7
2.2.2.8
2.2.2.9
2.2.2.10
2.2.2.11
2.2.2.18.1
2.2.2.18.2
2.2.2.18.3
2.2.2.18.4
2.2.2.18.5
2.2.2.18.6
2.2.3.1.1
2.2.3.1.2
2.2.3.8.4
2.2.6.18
2.2.6.19
2.2.10
2.3.2.3
2.7.1.9.1
2.7.1.9.2
2.7.1.9.3
2.7.6.5
2.7.6.6
3.1.1.1.9.1
3.1.1.1.9.2
3.1.1.1.9.3
3.2.3
C004 DI-ADMN-81373 Presentation Material 2.2.1.9.4
2.2.2.7
2.2.2.8
2.2.2.9
2.2.2.10
2.2.2.11
2.2.2.18.1
2.2.2.18.2
2.2.2.18.3
2.2.2.18.4
2.2.2.18.5
2.2.2.18.6
2.2.3.1.1
2.2.3.1.2
2.2.3.8.4
2.2.6.18
2.2.6.19
2.2.9.3.2
2.2.10
2.3.2.3
2.7.1.9.1
2.7.1.9.2
2.7.1.9.3
2.7.6.5
2.7.6.6
3.1.1.1.9.1
3.1.1.1.9.2
3.1.1.1.9.3
3.2.3
C005 DI-ADMN-81250A Conference Minutes 2.2.2.7
2.2.2.8
2.2.2.9
2.2.2.10
2.2.2.11
2.2.2.18.1
2.2.2.18.2
2.2.2.18.3
2.2.2.18.4
2.2.2.18.5
2.2.2.18.6
2.2.3.1.1
2.2.3.1.2
2.2.3.8.4
2.2.6.18
2.2.6.19
2.2.10
2.3.2.3
2.7.1.9.1
2.7.1.9.2
2.7.1.9.3
2.7.6.5
2.7.6.6
3.1.1.1.9.1
3.1.1.1.9.2
3.1.1.1.9.3
3.2.3
3.2.4
3.2.5
C006 Reserved
C007 Reserved
C008 Reserved
C009 DI-ILSS-81495 Failure Mode, Effects, and Criticality
Analysis Report
2.2.2.1
C00A DI-IPSC-81431A System/Subsystem Specification (SSS) 2.2.2.12
2.7.1.2
3.1.1.1.2
C00B DI-SESS-81314A System/Segment Interface Control
Specification
2.2.2.13
2.7.1.3
3.1.1.1.3
C00C DI-IPSC-81434A Interface Requirements Specification
(IRS)
2.2.2.14
2.7.1.4
3.1.1.1.4
C00D DI-IPSC-81433A Software Requirements Specification
(SRS)
2.2.2.15
2.7.1.5
3.1.1.1.5
C00E DI-IPSC-81432A System/Subsystem Design Description
(SSDD)
2.2.2.16
C00F DI-IPSC-81441A Software Product Specification (SPS) 2.2.3.4.1
2.2.3.4.4
2.2.3.4.6
2.2.3.6
2.2.6.8
2.7.3.2.1
3.1.1.3.2
C00G DI-IPSC-81435A Software Design Description (SDD) 2.2.3.4.1
2.2.3.4.4
2.2.3.4.6
2.7.3.2.1
3.1.1.3.2
C00H DI-IPSC-81442A Software Version Description (SVD) 2.2.3.4.1
2.2.3.4.4
2.2.3.4.5
2.2.3.4.6
2.2.3.6
2.2.6.8
2.2.9.3.7
2.7.3.2.1
2.7.3.2.2
3.1.1.3.2
C00J DI-IPSC-81447A Computer Programming Manual (CPM) 2.2.3.4.2
C00K DI-IPSC-81448B Firmware Support Manual 2.2.3.4.3
C00L DI-IPSC-81437A Database Design Description (DBDD) 2.2.3.4.4
2.2.3.4.5
2.2.3.6
2.2.6.8
C00M DI-IPSC-81633 Software Programmer’s Guide 2.2.3.4.4
C00N Reserved
C00P DI-NDTI-80566A Test Plan 2.2.6.1
C00Q DI-SESS-81315B Failure Analysis and Corrective Action
Report (FACAR)
2.2.6.2
C00R DI-NDTI-80603A Test Procedure 2.2.6.3
2.2.6.4
2.2.6.6
2.2.6.13
2.2.6.14
2.2.6.17
2.7.6.1
C00S DI-NDTI-80809B Test/Inspection Report 2.2.6.3
2.2.6.4
2.2.6.7
2.8.1.2
2.2.6.10
2.2.6.13
2.2.6.14
2.2.6.17
2.2.8
2.7.6.2
3.1.1.6.2
C00T DI-NDTI-81585A/T Reliability Test Plan 2.2.6.5
C00U DI-TMSS-81586A/T Reliability Test Reports 2.2.6.5
C00V DI-ATTS-80284B Test Program Set Documentation (TPSD) 2.2.6.8
2.7.3.2.2
C00W DI-ATTS-80282B Test Program Set (TPS) and Operational
Test Program Set (OTPS) Acceptance
Test Procedures (ATPS)
2.2.6.8
2.7.6.3
C00X DI-ATTS-80283B Test Program Set (TPS) Acceptance Test
Report (ATR)
2.7.6.3
C00Y DI-IPSC-81438A Software Test Plan (STP) 2.2.6.11
2.7.6.4
3.2.21.7.5.6
C00Z DI-IPSC-81439A Software Test Description (STD) 2.2.6.11
2.7.6.4
C0A1 DI-IPSC-81440A Software Test Report (STR) 2.2.6.11
2.7.6.4
3.2.21.7.5.6
C0A2 DI-EMCS-81541B Electromagnetic Environmental Effects
(E3) Verification Procedures (E3VP)
2.2.6.15
C0A3 DI-EMCS-81542B Electromagnetic Environmental Effects
(E3) Verification Report (E3VR)
2.2.6.15
C0A4 DI-ILSS-80872 Training Materials 2.2.9.1
2.2.9.2
2.7.7
3.1.1.7
C0A5 DI-ALSS-81535 Deficiency Report (DR) 2.2.9.3.4
C0A6 DI-MGMT-80258A Material Improvement Project Report 2.2.9.3.4
C0A7 DI-RELI-81496 Reliability and Maintainability (R&M)
Block Diagrams and Mathematical
D001 DI-SESS-81000E/T Product Engineering Design Data and
Associated Lists
2.2.3.1
2.2.3.1.5
2.2.3.3
2.2.3.8.5
3.2.14.6
3.2.14.7
2.7.2.1
3.1.1.2.1
E001 DI-SESS-81254B Request for Nomenclature (DD Form 61) 2.2.3.3
E002 DI-SESS-80294B Maintenance Test and Support
Equipment List
2.2.1.9.1
E003 DI-ILSS-80454 Support Equipment Installation Data
(SEID)
2.2.1.9.2
E004 DI-MGMT-81836 Facilities Requirements Document
(FRD)
2.2.1.9.3
E005 DI-MISC-81113 Radar Spectrum Management (RSM)
Test Plan
2.2.6.16
E006 DI-EMCS-81827 Spectrum Certification Spectral
Characteristics Data
2.2.6.16
E007 DI-ATTS-80041A Test Requirements Document (TRD) 2.2.3.8.7.1
2.7.2.3
E008 DI-QCIC-80278B Calibration/Measurements Requirements
Summary
2.2.3.8.7.2
E00A DI-MGMT-80368A Status Report 2.2.9.3
2.3.2.4
2.4.3.1
3.2.13
E00B DI-SESS-81785 Systems Engineering Management Plan
(SEMP)
2.3.2.5
3.1.1.8
E00C DI-MISC-80508B Technical Report-Study/Service 2.3.1
F001 DI-MGMT-81453A Data Accession List (DAL) 2.2.1.2
2.4.3.3
3.2.10
3.2.14.5.2
3.2.16
3.2.21.7.5.9
G001 DI-CMAN-80858B Supplier's Configuration Management
Plan
3.2.14.1
G002 DI-CMAN-80639D Engineering Change Proposal 3.2.14.2
G003 DI-CMAN-80642D Notice Of Revision (NOR) 3.2.14.2
G004 DI-CMAN-80640D Request for Variance (RFV) 3.2.14.3
G005 DI-ADMN-81401B Contract Change Proposals (CCPs) 3.2.14.4
G006 DI-SDMP-81748/T Parts Management Plan 3.2.14.5
G007 DI-MISC-81832 Counterfeit Prevention Plan 2.7.8
3.1.1.8
G008 DI-QCIC-80126B Government Industry Data Exchange
Program (GIDEP) Alert Response
3.2.14.5.2
3.2.21.7.5.5
G009 Reserved
G00A DI-MFFP-81403 Corrosion Prevention and Control Plan 3.2.19
G00B Reserved
G00C DI-ADMN-81306 Program Protection Implementation Plan
(PPIP)
3.2.21.7
G00D DI-MISC-82256/T Supply Chain Risk Management Plan 3.2.21.7.8
G00E DI-MGMT-80377 Government Furnished Equipment Detail
Transaction Status Data
3.2.22
4.2.1
G00F DI-MGMT-81772 Lead-Free Control Plan 3.3
H001 DI-MGMT-81861B Integrated Program Management Report
(IPMR)
2.2.2.2
2.3.2.2
3.2.9
2.7.1.9
3.1.1.1.9
H002 DI-MGMT-80004A/T Management Plan 2.2.2.2
2.3.2.2
J001 DI-MGMT-81255 Production Status Report 3.2.6
L001 DI-SESS-81758A/T Logistics Product Data 2.2.3.8.2
L002 DI-PSSS-81716 Supplementary Provisioning Technical
Documentation
2.2.3.8.3
L003 DI-SESS-81874 Engineering Data for Provisioning
(EDFP)
2.2.3.8.3
L004 DI-SESS-81759/T Logistics Product Data Summaries 2.2.3.8.3
L005 DI-SESS-81359B Parts List 2.2.3.8.5
P001 DI-PACK 80120C Preservation And Packing Data 2.2.7.2
P002 DI-PACK 80121C Special Packaging Instructions 2.2.7.2
S001 DI-SAFT-81626 System Safety Program Plan (SSPP) 2.7.1.6
3.1.1.1.6
3.4
S002 DI-SAFT-80102B Safety Assessment Report (SAR) 2.7.1.6
3.1.1.1.6
3.4
S003 DI-SAFT-80101B System Safety Hazard Analysis Report
(SSHA)
2.7.1.6
3.1.1.1.6
3.4
S004 DI-ENVR-81375 Environmental Health and Safety Plan
(HSP)
3.4
S005 DI-MGMT-81398B Hazardous Materials Management
T001 TM-86-01Q Technical Manual Contract Requirement
(TMCR)
2.1.3.3
2.1.4.6
2.2.3.2.1
2.2.3.2.2
T002 Reserved
T003 Reserved
X001 DI-SESS-81768 Airworthiness Certification Criteria
Report
2.2.2.2
X002 DI-SESS-81766 Airworthiness Specification 2.2.2.2
X003 DI-MISC-81241 Airworthiness Directives/Service
Bulletins/Advisory Data
2.2.2.2
X004 DI-MGMT-80004A/T Management Plan 2.2.2.2
Y001 DI-SDMP-81493/T Program-Unique Specification
Documents
2.2.1.12.1
Y002 DI-NDTI-81284 Test and Evaluation Program Plan
(TEPP)
3.2.21.7
3.2.21.7.5.1
Y003 DI-MISC-80508B Technical Report Study/Services 3.2.21.7
3.2.21.7.5.4
Y004 DI-SESS-81248 Interface Control Document (ICD) 2.2.2.14
Y005 DI-MSSM-81750 DoD Modeling and Simulation (M&S)
Accreditation Plan
3.2.21.7
Y006 DI-MSSM-81753 DoD Modeling and Simulation (M&S)
Accreditation Report
3.2.21.7
Y007 DI-MSSM-81751
DoD M&S Verification and Validation
(V&V) Plan
3.2.21.7
Y008 DI-MSSM-81752 DoD M&S V&V Report 3.2.21.7
Y009 DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.2
Y00A DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.2
Y00B DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.3
Y00C DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.4
Y00D Reserved
Y00E DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.1
3.2.21.7.5.5
Y00F DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.1
Y00G DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.1
Y00H DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.2
Y00J DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.2
Y00K DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.3
Y00L DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.4
Y00M DI-MGMT-81763 Customized Microelectronics Devices
Source Protection Plan
3.2.21.7.5.5
Y00N DI-MISC-80508B/T Technical Report Study/Services 3.2.21.7.5.5
Y00P DI-MGMT-81717 Information Systems Security
(INFOSEC) Anonymity Plan (IAP)
3.2.21.7.5.5
Y00Q DI-SESS-81770 System/Software Integration Laboratory
(SIL) Development and Management
Plan
3.2.21.7.5.6
Y00R DI-SESS-81343
Information Security (INFOSEC)
Boundary Configuration Management
Plan
3.2.21.7.5.6
Y00S DI-MISC-81688 Key and Certificate Management Plan
(KCMP)
3.2.21.7.5.7
Y00T DI-MGMT-81026 TEMPEST Control Plan 3.2.21.7.5.8
Y00U DI-EMCS-81683 TEMPEST Test Plan 3.2.21.7.5.8
Y00V DI-EMCS-81684 TEMPEST Test Evaluation Report 3.2.21.7.5.8
Z001 DI-MISC-80508B Technical Report-Study/Service 2.8
Z002 DI-MISC-80508B Technical Report-Study/Service 2.8.1.1
Z003 DI-NDTI-80809B Test/Inspection Report 2.8.1.2
TRAVEL
Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost
1 LO
TRAV
Travel TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICERThe Contractor shall be reimbursed for travel expenses directly required in the performance of work hereunder or pursuant to orders in accordance with subpart 31.2 of the Federal Acquisition Regulation.
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required
TRAVEL
+ TBC 1 LO *24 Months
Proposed Period of Performance
+ TBC 1 LO
Enhancement Options: The Enhancement Options are for the accomplishment of the AFGSC ALQ-172 Modernization. The list below includes the five (5) AFGSC Enhancement Options. The CLINs and subCLINs for these options may be exercised at any time during contract performance.
Option 11-Stand-off Emitter Option 12- 4-Man Crew Phase I Option 13- Stand-off Sensor Replacement Option 14- 4-Man Crew Phase 2 Option 15- Infrastructure RE-host (IFR)
Option 11- Stand-off Emitter. For administrative purposes, there shall be two (2) parts of Option 11.
-Option 11(a) consist of CLIN 1100 and may be exercised in part or in whole, from time to time
- Option 11(b) consists of CLINs 1101, 1102, 1103, and 1104, and may be exercised in part or in whole, from time to time
OPTION 11 STAND-OFF EMITTER
EMD STAND-OFF EMITTER
Item No.
To Be Negotiated Quantity U/I Unit Price
TBN
R425 EMD Stand-off Emitter Engineering Material Development (EMD), Integration, and Test Class I ODS Substance Application/Use Quantity None
Item No.
1100AA
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost
1 LO To be Negotiated
R425 EMD Stand-Off Emitter EMD System Design and Test IAW SOW Section 2.2., 2.3 and Sections 3 through Section 5.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *36 Months
Proposed Period of Performance
1 LO
Item No.
1100BA
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost 1 LO To be Negotiated
R425 EMD Stand-Off Emitter Long Lead Items IAW SOW Section 2.2.4.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *12 Months
Proposed Period of Performance
1 LO
Item No.
1100CA
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost 1 LO To be Negotiated
R425
EMD Stand-Off Emitter Contractor E-Qual/DVT Test Units IAW SOW Section 2.2.6.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *12 Months
Proposed Period of Performance
1 LO
Item No.
1100DA
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost 2 LO To be Negotiated
R425 EMD Stand-Off Emitter Trial kit/Kit Proof Units (Group A and Group B) IAW SOW Section 2.2.8.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
2 LO *12 Months
Proposed Period of Performance
2 LO
Item No.
1100EA
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost 1 LO To be Negotiated
R425 EMD Stand-Off Emitter Test Support (DT/OT) IAW SOW Section 2.2.9
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *10 Months
Proposed Period of Performance
1 LO
Item No.
1100FA
Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost 1 LO To be Negotiated
R425 EMD Stand-Off Emitter Travel and Per Diem IAW SOW Section 3.2.2.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *36 Months
Proposed Period of Performance
1 LO
Item No.
1100GA
Not Separately Priced Quantity U/I Unit Price
1 LO NSP
R425 EMD Stand-Off Emitter Data IAW SOW Section 2.2.3, 2.3, 3 through 5 Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *36 Months
Proposed Period of Performance
1 LO
Item No.
1100HA
Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost 1 LO To be Negotiated
R425 EMD Stand-Off Emitter Material IAW SOW Section 2.2, 3.1, 3.3, 3.4, and 4.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *36 Months
Proposed Period of Performance
1 LO
Item No.
To Be Negotiated Quantity U/I Unit Price
TBN
R425 PROD Stand-off Emitter Production
Item No.
1101AA
Firm Fixed Price Estimated Quantity
U/I Unit Price Amount
10 KT
R425 PROD Stand-off Emitter Installation Kits IAW SOW Paragraph Section 2.5., and Section 3 through 5.
ESTIMATED QUANTITY RANGE: 1-10
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
10 KT *12 Months
Proposed Period of Performance
10 KT
Item No.
1101BA
Firm Fixed Price Estimated Quantity
U/I Unit Price Amount
24 EA To be Negotiated
R425 PROD Stand-off Emitter Installation Kits IAW SOW Paragraph Section 2.5., and Section 3 through 5.
ESTIMATED QUANTITY RANGE: 1-24
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
24 EA *12 Months
Proposed Period of
24 EA
Option 11 Item No.
Firm Fixed Price Estimated Quantity
U/I Unit Price Amount
22 KT To be Negotiated
R425 PROD Stand-off Emitter Installation Kits IAW SOW Paragraph Section 2.5., and Section 3 through 5.
ESTIMATED QUANTITY: 1-22
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
22 KT *12 Months
Proposed Period of Performance
22 KT
Option 11 Item No.
Firm Fixed Price Estimated Quantity
U/I Unit Price Amount
22 KT To be Negotiated
R425 PROD Stand-off Emitter Installation Kits IAW SOW Paragraph Section 2.5., and Section 3 through 5.
ESTIMATED QUANTITY: 1-22
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
22 KT *12 Months
Proposed Period of
22 KT
Option 11 Item No.
Firm Fixed Price Estimated Quantity
U/I Unit Price Amount
22 KT To be Negotiated
R425 PROD Stand-off Emitter Installation Kits IAW SOW Paragraph Section 2.5., and Section 3 through 5.
ESTIMATED QUANTITY: 1-22
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
22 KT *12 Months
Proposed Period of Performance
22 KT
Option 12 - 4-Man Crew Phase 1 (4MC). For administrative purposes, there will be four (4) parts of Option 12.
- Option 12(a): EMD consist of CLIN 1200 and may be exercised in part or in whole, from time to time
- Option 12(b): LRIP consist of CLIN 1201 and may be exercised in part or in whole, from time to time
- Option 12(c): Depot Activation consists of CLIN 1202 and may be exercised in part or in whole, from time to time
- Option 12(d): Depot Activation consist of CLINs 1203, 1204, and 1205, and may be exercised in part or in whole, from time to time
OPTION 12 4-MAN CREW (4MC) PHASE 1
Option 12 Item No.
To Be Negotiated Quantity U/I Unit Price
TBN
R425 EMD 4MC Phase 1 Engineering Material Development (EMD), Integration, and Test Executable Range: 2022-2025
Item No.
1200AA
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost 1 LO To be Negotiated
R425 EMD 4MC Phase 1 EMD System Design and Test IAW SOW Section 2.2., 2.3 and Sections 3 through 5.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *48 Months
Proposed Period of Performance
1 LO
Item No.
1200BA
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost 1 LO To be Negotiated
R425 EMD 4MC Phase 1 Long Lead Items IAW SOW Section 2.2.4.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *18 Months
Proposed Period of Performance
1 LO
Item No.
1200CA
Quantity U/I Estimated Cost Fixed Fee Est Total Cost 1 LO To be Negotiated
R425 EMD 4MC Phase 1 Contractor E-Qual/DVT Test Units IAW SOW Section 2.2.6.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *18 Months
Proposed Period of Performance
1 LO
Item No.
1200DA
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost 2 LO To be Negotiated
R425 EMD 4MC Phase 1 Trial kit/Kit Proof Units (Group A and Group B) IAW SOW Section 2.2.8.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
2 LO *18 Months
Proposed Period of Performance
2 LO
Item No.
1200EA
Cost Plus Fixed Fee
1 LO To be Negotiated
R425 EMD 4MC Phase 1 Support Equipment IAW SOW Sections 2.2 and Sections 3 through 5.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *28 Months
Proposed Period of Performance
1 LO
Item No.
1200FA
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost 1 LO To be Negotiated
R425 EMD 4MC Phase 1 Test Support (DT/OT) IAW SOW Section 2.2.9.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *12 Months
Proposed Period of Performance
1 LO
Item No.
1200GA
Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost 1 LO To be Negotiated
R425 EMD 4MC Phase 1 Travel and Per Diem IAW SOW Section 3.2.2.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *48 Months
Proposed Period of Performance
1 LO
Item No.
1200HA
Not Separately Priced Quantity U/I Unit Price
1 LO NSP
R425 EMD 4MC Phase 1 Data IAW SOW Section 2.2.3, 2.3, 3 through 5.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *48 Months
Proposed Period of Performance
1 LO
Item No.
1200JA
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost 1 LO To be Negotiated
R425 EMD 4MC Phase 1 Material IAW SOW Section 2.2, 3.1, 3.3, 3.4, and 4.
Class I ODS Substance Application/Use Quantity
Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *48 Months
Proposed Period of Performance
1 LO
Item No.
Firm Fixed Price Estimated Quantity
U/I Unit Price Amount
8 KT To be Negotiated
R425 LRIP 4MC Phase 1 LRIP (Group A and Group B) IAW SOW Paragraph Section 2.4, and and Section 3 through 5.
ESTIMATED QUANTITY: 1-8
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
8 KT *24 Months
Proposed Period of Performance
8 KT
Item No.
To Be Negotiated Quantity U/I Unit Price
TBN
R425 DA 4MC Phase 1 Depot Activation
ESTIMATED QUANTITY: 1
Item No.
1202AA
Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost
1 LO
R425 DA 4MC Phase 1 Depot Level Support Mod Kit and Installation IAW SOW Section 2.7, and Section 3 through 5.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *24 Months
Proposed Period of Performance
1 LO
Item No.
1202BA
Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost
1 LO
R425 DA 4MC Phase 1 Material IAW SOW Section 2.7.3.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *24 Months
Proposed Period of Performance
1 LO
Item No.
1202CA
Not Separately Priced
Quantity U/I Unit Price
1 LO NSP
R425 DA 4MC Phase 1 Data IAW SOW Section 2.2.3, 2.3, 3 through 5.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *24 Months
Proposed Period of Performance
1 LO
Item No.
1202DA
Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost
1 LO
R425 DA 4MC Phase 1 Travel and Per Diem IAW SOW Section 3.2.2.
Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) Req No / Pri
Required Period of Performance
1 LO *24 Months
Proposed Period of Performance
1 LO
Option 12 Item No.
Firm Fixed Price Estimated Quantity
U/I Unit Price Amount
Option 12 17 KT To be Negotiated
R425 PROD 4MC Phase 1 Installation Kits IAW SOW Paragraph Section 2.5., and Section 3 through 5.
ESTIMATED QUANTITY: 1-17
Class I ODS Substance Application/Use Quantity None Place of…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .