FA825114R0017.pdf

STANDARD FORM 1447 (2/2012)

Prescribed by GSA FAR (48 CFR) 53.215-1(d)

4. SOLICITATION NUMBER

FA8251-14-R-0017

X

6.SOLICITATION ISSUE DATE

8. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR

SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOSB PROGRAM

HUBZONE SMALL

BUSINESS EDWOSB

SERVICE-DISABLED VETERAN-

OWNED SMALL BUSINESS NAICS CODE: 336413

8(A) SIZE STANDARD: 1,000

DATE SIGNED

28. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

26. AWARD OF CONTRACT: YOUR OFFER ON SOLICITATION NUMBER

SHOWN IN BLOCK 4 INCLUDING ANY ADDITIONS OR CHANGES WHICH

ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

ROUTINE

Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 30 days.

Due to the complexity and criticality of the F-5 Rate of Flow Indicator, this contract will be open competition to qualified sources only. There are currently two qualified sources:

Texas Aerospace Services (29242, 672S8) Ametek Inc (97424)

Other interested parties may become qualified according to the Source Qualification Statement.

SEE LINE ITEM SCHEDULE

22.

AMOUNT

16. AUTHORITY FOR USING OTHER THAN 10 USC 2304 41 USC 253

FULL AND OPEN COMPETITION (c) ( ) (c) ( )

DATE SIGNED

27. SIGNATURE OF OFFEROR/CONTRACTOR

20.

UNIT

21.

UNIT PRICE

19.

QUANTITY

13. CONTRACTOR OFFEROR CODE FACILITY CODE

11. IF OFFER IS ACCEPTED BY THE GOVERNMENT WITHIN * ___ CALENDAR DAYS (60 CALENDAR

DAYS UNLESS OFFEROR INSERTS A DIFFERENT PERIOD) FROM THE DATE SET FORTH IN BLK 9

ABOVE, THE CONTRACTOR AGREES TO HOLD ITS OFFERED PRICES FIRM FOR THE ITEMS

SOLICITED HEREIN AND TO ACCEPT ANY RESULTING CONTRACT SUBJECT TO THE TERMS AND

CONDITIONS STATED HEREIN. *30

RATING

DO: A1

3. AWARD/EFFECTIVE DATE

FA8251

2. CONTRACT NO.

X

CHECK IF REMITTANCE IS DIFFERENT

AND PUT SUCH ADDRESS IN OFFER

17.

ITEM NO.

12. ADMINISTERED BY CODE

Total

SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK: 14 EFT:T

SCD:C

NAME AND TITLE OF SIGNER (TYPE OR PRINT) NAME OF CONTRACTING OFFICER

24. AWARD AMOUNT (FOR GOVT USE ONLY)

23. ACCOUNTING AND APPROPRIATION DATA

SEE SCHEDULE

5. SOLICITATION TYPE

SEALED BIDS NEGOTIATED

(IFB) (RFP)

15. PROMPT PAY DISCOUNT

25. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 1

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SETFORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY CONTINUATION SHEETS SUBJECT

THE TERMS AND CONDITIONS SPECIFIED HEREIN.

10. ITEMS TO BE PURCHASED (BRIEF DESCRIPTION)

SUPPLIES SERVICES Other Aircraft Part and Auxiliary Equipment Manufacturing

9.

Solicitation: Offers will be received at the Issuing office until * on * . Late offers are subject to late proposal provisions incorporated herein.

All offers are subject to such provisions, representations certifications and specifications as are attached or incorporated by reference.*

12-MAY-2014 4:00PM

18.

SCHEDULE OF SUPPLIES/SERVICES

14. PAYMENT WILL BE MADE BY CODE

(SEE ESP CLAUSE 252.232-7003.)

X

7. ISSUED BY CODE

DEPARTMENT OF THE AIR FORCE, DIRECTORATE OF CONTRACTING

AFSC PZABB

6050 GUM LANE BLDG 1215

HILL AIR FORCE BASE UT 84056-5825

BUYER: Robert C. Olsen/AFSC robert.olsen.3@us.af.mil Phone: (801) 775- 2290 Fax: (801) 777-0389 No Collect Calls

X

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)SOLICITATION/CONTRACT

BIDDER/OFFEROR TO COMPLETE BLOCKS 11, 13, 15, 21, 22, & 27.

J

SF 1447 (rev 2/2012) BACK

NO RESPONSE FOR THE REASONS CHECKED

TYPE OR PRINT NAME AND TITLE OF SIGNER

SIGNATURENAME AND ADDRESS OF FIRM (Include Zip Code)

WE DO NOT DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF

ITEMS INVOLVED

WE DO

OTHER (Specify)

CANNOT COMPLY WITH SPECIFICATIONS

CANNOT COMPLY WITH SPECIFICATIONS CANNOT MEET DELIVERY REQUIREMENT

FOLD

FOLD

SOLICITATION NO. FA825114R0017

DUE: 12 MAY 2014 4:00 PM

FROM: AFFIX

STAMP

HERE

TO:

ATTN: Robert C Olsen/AFSC

DEPARTMENT OF THE AIR FORCE, DIRECTORATE OF CONTRACTING

AFSC PZABB

6050 GUM LANE BLDG 1215

HILL AIR FORCE BASE UT 84056-5825

Request for Proposal FA8251-14-R-0017

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

The purpose of this document is to establish a 5-year Indefinite Delivery Indefinite Quantity (IDIQ) type contract for the repair of F-5 Rate of Flow Indicators. Contractor will be required to provide all labor and parts or other materials and equipment necessary to accomplish the effort. Contract will be firm fixed price. Funded delivery orders will be issued and assets provided to the awardee as requirements generate.

The contractor will be responsible for providing all labor and other parts/materials and equipment to accomplish this effort.

In accordance with FAR 52.216-22(b), "Indefinite Quantity", the minimum is defined for each CLIN. The Government shall have the right to achieve the minimum order by ordering the entire minimum quantity in the initial ordering period. The maximum quantity is estimated for each CLIN as well. The monthly delivery quantities will be negotiated at time of order issuance.

Failure of the Government to purchase such items in the amounts or quantities described in the schedule as "estimated" or "maximum" will not entitle the contractor to any equitable adjustment in price.

Early delivery of assets on the contract shall be determined acceptable at no additional cost to the Government, on all CLINS stated below on future orders.

Informational CLIN

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA Not Separately Priced Not Separately Priced

NSN: 6680-01-061-3996 XJ

INDICATOR,RATE OF F

Monitors and displays by pointer the rate at which fuel is being comsumed by both left and right engines.

Aluminum, brass and copper Manufacturer Part Number

97424 8DJ135LWB1

Associated Document(s) Line Item(s)

FD20201400009 0001

Priority: R

Inspection: Origin Acceptance: Origin Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Informational CLIN

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A FB2029 ORIGIN

Type / Ship To PACRN Mark For

A FB2029 PAA

Type / Ship To Quantity (U/I) ARO Funded Order or

Reparable Assets, whichever is later. 45 calendar days

Req No / Pri

Required Delivery

A FB2029 EA ARO Funded Order or Repar

Proposed Delivery

A FB2029 EA

Qualfication Article

Item No.

0001AA

Firm Fixed Price Quantity U/I Unit Price Amount

1 EA

CLIN ACRN ACRN Total

0001AA AA

NSN: 6680-01-061-3996 XJ

INDICATOR,RATE OF FLOW

INDICATOR,RATE OF FLOW | 2.000 INCHES NOMINAL | 3.650 INCHES NOMINAL | AC | 115.0 VOLTS NOMINAL | 400.0 HERTZ NOMINAL | DIAL | 0.0/15000.0 POUNDS PER HOUR SINGLE INDICATOR SINGLE SCALE | FUEL FLOW;PPH X1000 | 1 | MS3113-14-15P|INDICATING ALL POINTERS | 1.812 INCHES NOMINAL | 1.940 INCHES NOMINAL Manufacturer Part Number

97424 8DJ135LWB1

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

Qualfication Article

A FB2029 ORIGIN

Type / Ship To PACRN Mark For

A FB2029 PAB

Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

A FB2029 1 EA *60 Calendar Days

Proposed Delivery

A FB2029 1 EA

Production Articles with Qualification Article

Bid A - First Article Required Item No.

0001AB

Firm Fixed Price Best Estimated Qty

U/I Unit Price

19 EA

Minimum Quantity

1 EA

Maximum Quantity

19 EA

CLIN ACRN ACRN Total

0001AB AA

NSN: 6680-01-061-3996 XJ

Production W/Qual Article

INDICATOR,RATE OF FLOW

INDICATOR,RATE OF FLOW | 2.000 INCHES NOMINAL | 3.650 INCHES NOMINAL | AC | 1 15.0 VOLTS NOMINAL | 400.0 HERTZ NOMINAL | DIAL | 0.0/15000.0 POUNDS PER HOUR SINGLE INDICATOR SINGLE SCALE | FUEL FLOW; PPH X1000 | 1| MS3113-14-15P | INDICATING ALL POINTERS | 1.812 INCHES NOMINAL | 1.940 INCHES NOMINAL Manufacturer Part Number

97424 8DJ135LWB1

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A FB2029 ORIGIN

Type / Ship To PACRN Mark For

A FB2029 PAC

Production Articles with Qualification Article

Bid A - First Article Required Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

A FB2029 19 EA *45 Calendar Days

Proposed Delivery

A FB2029 19 EA

Production - No Qualification Article Required

Bid B - First Article NOT Required Item No.

0001AC

Firm Fixed Price Best Estimated Qty

U/I Unit Price

20 EA

Minimum Quantity

1 EA

Maximum Quantity

20 EA

CLIN ACRN ACRN Total

0001AC AA

NSN: 6680-01-061-3996 XJ

INDICATOR,RATE OF FLOW

INDICATOR,RATE OF FLOW | 2.000 INCHES NOMINAL | 3.650 INCHES NOMINAL A C | 115.0 VOLTS NOMINAL | 400.0 HERTZ NOMINAL | DIAL | 0.0/15000.0 POUNDS PER HOUR SINGLE INDICATOR SINGLE SCALE | FUEL FLOW; PPH X1000|1 | MS3113-14-15P | INDICATING ALL POINTERS | 1.812 INCHES NOMINAL | 1.940 INCHES NOMINAL Manufacturer Part Number

97424 8DJ135LWB1

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A FB2029 ORIGIN

Type / Ship To PACRN Mark For

A FB2029 PAD

Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Production - No Qualification Article Required

Bid B - First Article NOT Required Required Delivery

A FB2029 20 EA *45 Calendar Days

Proposed Delivery

A FB2029 20 EA

Data CAV/AF Reporting

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount 1 LO Not Separately Priced Not Separately Priced

CLIN ACRN ACRN Total

0002 AA

Data CLIN 0002 DATA CAV AF IAW DD 1423-1 ATTACHED HERE TO COMMERCIAL ASSET VISIBILITY AIR FORCE PRODUCTION STATUS

REPORTING IAW 1423-1/CDRL EXHIBIT

Associated Document(s) Line Item(s)

FD20201400009 0002

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A FA8212 ORIGIN

Type / Ship To PACRN Mark For

A FA8212 PAE

Type / Ship To Quantity (U/I) ARO IAW DD FORM

1423.

Req No / Pri

Required Delivery

A FA8212 1 LO ARO IAW DD FORM

1423.

Proposed Delivery

A FA8212 1 LO

First Article Test Report

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount 1 LO Not Separately Priced Not Separately Priced

CLIN ACRN ACRN Total

0003 AA

Data DATA IAW DD 1423-1 CDRL Test Report DI-NDTI-80809B/A003 CLIN 0004 Associated Document(s) Line Item(s)

FD20201400009 0003

Priority: R

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

+ 1423 ORIGIN

A FA8212

Type / Ship To PACRN Mark For

+ 1423 PAF

Type / Ship To Quantity (U/I) IAW DD Form 1423 Req No / Pri

Required Delivery

+ 1423 1 LO IAW DD Form 1423

Proposed Delivery

+ 1423 1 LO

IAW 1423

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: + 1423

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

TYPE/CODE: A FA8212

FA8212 AFSC PZABA2

BLDG 1215 CP 801 586 8478

6050 GUM LN

HILL AFB UT 84056-5825

HILL AFB UT 84056-5825

USA

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

TYPE/CODE: A FB2029

FB2029 OO ALC DDHU CNTRL RCV

BLDG 849W CP 801 777 7898

5851 F AVE

HILL AFB UT 84056-5713

HILL AFB UT 84056-5713

USA

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

PART I - THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

FIRST ARTICLE TEST, CERTIFICATION AND DISPOSITION REQUIREMENTS

(FEB 1998)

(IAW FAR 9.308-2)

Test criteria are as follows:

Lot/Item Government Test/Inspection Requirements

Lot/Item Contractor Test/Inspection Requirements 0001AA (See Below)

Contractor Testing Requirements Contractor will notify requesting organization 416 SCMS/GUMBC and OL:H/PZABA 30 days prior to testing in order to arrange the presence of DCMA to validate testing at the contractor facility.

Performance or other characteristics which the First Articles must meet are:

USAF Technical Order 5L6-2-58-3

Detailed technical requireemtns for First Article approval tests are contained in USAF Technical Order 5L6-2-58-3

Disposition of the First Article shall be as follows:

Lot/Item Approved 0001AA Forwarded to: Supply

Lot/Item Disapproved 0001AA Returned to the contractor

52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.302)

(Applicable for supplies, services furnishing of supplies, fixed-price and exceeds the simplified acquisition threshold)

52.246-4 INSPECTION OF SERVICES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.304)

(Applicable for fixed-price services, or supplies furnishing services over the simplified acquisition threshold)

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (FEB 1999)

(IAW FAR 46.311, DFARS 246.202-4(1))

The Contractor shall comply with the higher-level quality standard selected below. [If more than one standard is listed, the offeror shall indicate its selection by checking the appropriate block.]*

Title Number Date Tailoring *See Individual Line Item Schedule

(Applicable only if specified in the individual order/call issued hereunder)

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

(IAW FAR 46.316)

(Applicable to the furnishing of supplies, services involving the furnishing of supplies, or research and development, when a fixed-price contract is contemplated and the contract amount is expected to exceed the simplified acquisition threshold)

252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2008)

(IAW DFARS 246.370)

(Applicable for deliverable supplies or hardware)

INSPECTION AND ACCEPTANCE (SEP 1999)

(IAW FAR 46.401(b), FAR 46.503) (Applicable to all orders issued hereunder)

Government Contract Quality Assurance Inspection and Acceptance will be at (Final):

[CONTRACTOR FILL-IN]

Item No(s): See schedule for items with the following code(s) listed below :

Inspection Code and Address:

PART I - THE SCHEDULE

SECTION F

DELIVERIES OR PERFORMANCE

52.211-8 TIME OF DELIVERY (JUN 1997)

(IAW FAR 11.404(a)(2)) DELIVERY FOR EACH ITEM IS ANNOTATED IN THE SCHEDULE (PART I SECTION B) UNDER EACH LINE

ITEM.

(Applicable when the Government desires delivery by a certain time but requires delivery by a specified later time, and the delivery schedule is to be based on the date of the contract)

52.242-15 STOP-WORK ORDER (AUG 1989)

(IAW FAR 42.1305(b)(1)) (Applicable for supplies, services, or research and development)

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

(IAW FAR 42.1305(c)) (Applicable to fixed-price for supplies other than commercial or modified-commercial items)

52.247-29 F.O.B. ORIGIN (FEB 2006)

(IAW FAR 47.303-1(c)) (Applicable when specifying f.o.b. origin)

52.247-30 F.O.B. ORIGIN, CONTRACTOR'S FACILITY (FEB 2006)

(IAW FAR 47.303-2(c)) (Applicable to f.o.b. origin at contractor's facility)

52.247-65 F.O.B. ORIGIN, PREPAID FREIGHT--SMALL PACKAGE SHIPMENTS (JAN 1991)

(IAW FAR 47.303-17(f)) (Applicable when specifying f.o.b. origin)

F.O.B. ORIGIN (OCT 1993)

(IAW FAR 47.305(b)) Any supply item applicable to this document shall be delivered F.O.B. at:

F.O.B. Address

[CONTRACTOR FILL-IN]

(Applicable when delivery term is f.o.b. origin)

PART I - THE SCHEDULE

SECTION G

CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1))

(a) Definitions. As used in this clause— “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow

(WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov ; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/ .

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

(Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC Issue By DoDAAC Admin DoDAAC Inspect By DoDAAC Ship To Code Ship From Code Mark For Code Service Approver (DoDAAC) Service Acceptor (DoDAAC) Accept at Other DoDAAC LPO DoDAAC DCAA Auditor DoDAAC Other DoDAAC(s) (*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(The above Clause/Provision has been modified.)

(Applicable when 252.232-7003 is used and neither 232.7003(b) nor (c) apply)

ACCOUNTING AND APPROPRIATION DATA (AUG 1998)

Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable

AA 97 X4930 FC04 64 4 47 GH 15327Z 01K010 00000 UJELMM 503000 F03000 $0.00

PSR: K02448 FSR: 001884

ACRN TOTAL $ 0.00

PART II - CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

5352.201-9101 OMBUDSMAN (NOV 2012)

(IAW AFFARS 5301.9103)

(c) If resolution cannot be made by the contracting officer, interested party may contact the ombudsman, Kevin Flinders at 801 777 -6549 , FAX 801 777 -6830 , email kevin.flinders@hill.af.mil . Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU or AFISRA ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2397, facsimile number (571) 256-2431.

(Applicable to all solicitations and contracts)

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a))

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(SEP 2013)

(IAW DFARS 203.970)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT

AWARDS (JUL 2013)

(IAW FAR 4.1403(a))

(Applicable over $25,000, unless not required to be reported in FPDS)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b)) (Applicable to all orders issued hereunder)

252.204-7012 SAFEGUARDING OF UNCLASSIFIED CONTROLLED TECHNICAL INFORMATION

(NOV 2013)

(IAW DFARS 204.7303)

252.204-7015 DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS

(FEB 2014)

(IAW DFARS 204.7403(c))

(Applicable to solicitations and contracts that involve litigation support services when 252.204-7014 is not included)

52.209-3 FIRST ARTICLE APPROVAL--CONTRACTOR TESTING (SEP 1989)

(IAW FAR 9.308-1(a)(1), FAR 9.308-1(b)(1))

(a) The Contractor shall test ** unit(s) of Lot/Item * as specified in this contract. At least *** calendar days before the beginning of first article tests, the Contractor shall notify the Contracting Officer, in writing, of the time and location of the testing so that the Government may witness the tests.

*Lot/Item ***Calendar Days Before Test **Quantity

0001AA 30 1

(b) The Contractor shall submit the first article test report within ___**___ calendar days from the date of this contract to ___***___ marked "FIRST ARTICLE TEST REPORT: Contract No. Lot/Item No. ___*___” Within ___****___ calendar days after the Government receives the test report, the Contracting Officer shall notify the Contractor, in writing, of the conditional approval, approval, or disapproval of the first article. The notice of conditional approval or approval shall not relieve the Contractor from complying with all requirements of the specifications and all other terms and conditions of this contract. A notice of conditional approval shall state any further action required of the Contractor. A notice of disapproval shall cite reasons for the disapproval.

*Lot/Item ****Approval Days ELIN No.

0001AA 15 A002

FA Test Report Item ***Type/Location **Calendar Days

52.209-3 FIRST ARTICLE APPROVAL--CONTRACTOR TESTING -- ALTERNATE I (JAN 1997)

(IAW FAR 9.308-1(a)(2), FAR 9.308-1(b)(2))

52.209-3 FIRST ARTICLE APPROVAL--CONTRACTOR TESTING -- ALTERNATE II (SEP 1989)

(IAW FAR 9.308-1(a)(3), FAR 9.308-1(b)(3))

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT

(AUG 2013)

(IAW FAR 9.409)

(Applicable when exceeding $30,000)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000)

(IAW FAR 11.304)

(Applicable to supplies that are not commercial items)

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

(IAW FAR 11.604(b)) This is a rated order certified for national defense , emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

(Applicable to all rated orders)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (DEC 2013)

(IAW DFARS 211.274-6(a)(1), DFARS 212.301(f)(vi))

(a) Definitions. As used in this clause—

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html .

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

See Schedule as Applicable

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

*Items less than $5000, which require UID, will be specifically identified in the schedule.

See Schedule as Applicable

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _____( or See Schedule as Applicable).

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _____( or See Schedule as Applicable).

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number ______, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(Applicable when delivery of one or more “items” as defined at 252.211-7003(c) is required)

52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

(IAW FAR 15.209(h), AFFARS 53.15.209(h)) (Applicable when using uniform contract format that is not commercial or for construction)

52.216-19 ORDER LIMITATIONS (OCT 1995)

(IAW FAR 16.506(b))

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than quantity of 1, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor--

(1) Any order for a single item in excess of quantity of 20;

(2) Any order for a combination of items in excess of ; or

(3) A series of orders from the same ordering office within 5y days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal

Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 45 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

52.216-22 INDEFINITE QUANTITY (OCT 1995)

(IAW FAR 16.506(e))

(d) Contractor shall not be required to make any deliveries under this contract after Contemplating a five year IDIQ contract..

252.216-7006 ORDERING (MAY 2011)

(IAW DFARS 216.506(a))

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract schedule. Such orders may be issued from During contract ordering period including possible extensions..

(Applicable to solicitations and contracts when a definite-quantity contract, a requirements contract, or an indefinite-quantity contract is contemplated)

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013)

(IAW FAR 19.309(d))

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code _____________ assigned to contract number ______________________________.

[Contractor to sign and date and insert authorized signer's name and title].

(Applicable in solicitations and contracts exceeding the micro-purchase threshold when the contract will be performed in the United States or its outlying areas)

52.222-3 CONVICT LABOR (JUN 2003)

(IAW FAR 22.202)

(Applicable when performance is in the U.S., Puerto Rico, Northern Mariana Islands, American Samoa, Guam, or the U.S. Virgin Islands, unless subject to the Walsh-Healey Public Contracts Act, purchase is from Federal Prisons Industries, Inc., or purchase is from any State prison of finished supplies that may be secured in the open market/existing stocks, as distinguished from supplies requiring special fabrication, and exceeds the micro-purchase threshold)

52.222-21 PROHIBITION OF SEGREGATED FACILITIES (FEB 1999)

(IAW FAR 22.810(a)(1)) (Applicable when exceeding $10,000, except those exempted by FAR 22.807 (b) which includes those for work to be performed outside the U.S. by employees who were not recruited within the U.S.)

52.222-26 EQUAL OPPORTUNITY (MAR 2007)

(IAW FAR 22.810(e))

52.222-35 EQUAL OPPORTUNITY FOR VETERANS (SEP 2010)

(IAW FAR 22.1310(a)(1), DFARS 222.1310(a)(1)) (Applicable when the expected value is $100,000 or more except when work is performed outside the United States by employees recruited outside the United States or the Director, Office of Federal Contract Compliance Programs, has waived, in accordance with 22.1305(b), all of the terms of the clause)

52.222-36 AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (OCT 2010)

(IAW FAR 22.1408(a)) (Applicable over $15,000 except when performance of work and recruitment of workers will occur outside the United States, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, and Wake Island, or the agency head has waived, in accordance with 22.1403(a) or 22.1403(b) all the terms of the clause)

52.222-37 EMPLOYMENT REPORTS ON VETERANS (SEP 2010)

(IAW FAR 22.1310(b)) (Applicable when the expected value is $100,000 or more and workers were recruited within the United States)

52.222-41 SERVICE CONTRACT ACT OF 1965 (NOV 2007)

(IAW FAR 22.1006(a)) (Applicable to services over $2,500)

52.222-42 STATEMENT OF EQUIVALENT RATES FOR FEDERAL HIRES (MAY 1989)

(IAW FAR 22.1006(b)) This Statement is for Information Only:

It is not a Wage Determination

Employee Class Monetary Wage Fringe Benefits

(Applicable to service items over $2,500)

52.222-50 COMBATING TRAFFICKING IN PERSONS (FEB 2009)

(IAW FAR 22.1705(a))

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE

DRIVING (AUG 2011)

(IAW FAR 23.1105)

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013)

(IAW DFARS 223.7306)

(Applicable to solicitations and contracts for supplies, maintenance and repair services, or construction)

52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008)

(IAW FAR 25.1103(a)) (Applicable to supplies or services involving the furnishing of supplies unless an exception applies)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013)

(IAW DFARS 225.7901-4)

52.227-1 AUTHORIZATION AND CONSENT (DEC 2007)

(IAW FAR 27.201-2(a)(1)) (Applicable except when both complete performance and delivery are outside the United States)

52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT

INFRINGEMENT (DEC 2007)

(IAW FAR 27.201-2(b))

52.232-1 PAYMENTS (APR 1984)

(IAW FAR 32.111(a)(1)) (Applicable to fixed-price supply or services and non-regulated communication services).

52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002)

(IAW FAR 32.111(b)(1)) (Applicable to fixed-price supply or fixed-price service)

52.232-11 EXTRAS (APR 1984)

(IAW FAR 32.111(c)(2)) (Applicable to fixed-price supply, fixed-price service, or transportation)

52.232-23 ASSIGNMENT OF CLAIMS (JAN 1986)

(IAW FAR 32.806(a)(1)) (Applicable when the micro-purchase threshold is exceeded, unless the contract will prohibit the assignment of claims (see 32.803(b))

52.232-25 PROMPT PAYMENT (JUL 2013)

(IAW FAR 32.908(c))

(a) Invoice payments—

(5) Computing penalty amount. The Government will compute the interest penalty in accordance with the Office of Management and Budget prompt payment regulations at 5 CFR part 1315.

(i) For the sole purpose of computing an interest penalty that might be due the Contractor, Government acceptance is deemed to occur constructively on the 7th day (unless otherwise specified in this contract) after the Contractor delivers the supplies or performs the services in accordance with the terms and conditions of the contract, unless there is a disagreement over quantity, quality, or Contractor compliance with a contract provision. If actual acceptance occurs within the constructive acceptance period, the Government will base the determination of an interest penalty on the actual date of acceptance. The constructive acceptance requirement does not, however, compel Government officials to accept supplies or services, perform contract administration functions, or make payment prior to fulfilling their responsibilities.

(Applicable except when the clause at 52.212-4, Contract Terms and Conditions--Commercial Items is included)

52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER--SYSTEM FOR AWARD

MANAGEMENT (JUL 2013)

(IAW FAR 32.1110(a)(1))

(Applicable for solicitations and contracts that include the provision at 52.204-7 or an agency clause that requires a contractor to be registered in the SAM database and maintain registration until final payment, unless (i) Payment will be made through a third party arrangement; or (ii) An exception listed in 32.1103(a) through (i) applies.)

52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013)

(IAW FAR 32.706-3)

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS

SUBCONTRACTORS (DEC 2013)

(IAW FAR 32.009-2)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS

(JUN 2012)

(IAW DFARS 232.7004)

(a) Definitions. As used in this clause—

(1) “Contract financing payment” and “invoice payment” have the meanings given in section 32.001 of the Federal Acquisition Regulation.

(2) “Electronic form” means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer.

(3) “Payment request” means any request for contract financing payment or invoice payment submitted by the Contractor under this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/ .

(c) The Contractor may submit a payment request and receiving report using other than WAWF only when—

(1) The Contracting Officer authorizes use of another electronic form. With such an authorization, the Contractor and the Contracting Officer shall agree to a plan, which shall include a timeline, specifying when the Contractor will transfer to WAWF;

(2) DoD is unable to receive a payment request or provide acceptance in electronic form;

(3) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting Officer’s determination with each request for payment; or

(4) DoD makes a payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD-approved electronic third party payment system or other exempted vendor payment/invoicing system (e.g., PowerTrack, Transportation Financial Management System, and Cargo and Billing System).

(d) The Contractor shall submit any non-electronic payment requests using the method or methods specified in Section G of the contract.

(e) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests.

252.232-7009 MANDATORY PAYMENT BY GOVERNMENTWIDE COMMERCIAL PURCHASE CARD

(DEC 2006)

(IAW DFARS 232.1110)

(Applicable at or below the micro-purchase threshold and Governmentwide commercial purchase card is required)

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006)

(IAW DFARS 232.7102)

(Applicable to all solicitations and contracts over the micro-purchase threshold issued hereunder)

52.233-1 DISPUTES (JUL 2002)

(IAW FAR 33.215)

(Applicable except to foreign governments or their agencies, or to international organizations or a subsidiary body of that organization, if the agency head determines that the application of the Act to the contract would not be in the public interest)

52.233-3 PROTEST AFTER AWARD (AUG 1996)

(IAW FAR 33.106(b))

52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004)

(IAW FAR 33.215(b))

252.237-7010 PROHIBITION ON INTERROGATION OF DETAINEES BY CONTRACTOR

PERSONNEL (JUN 2013)

(IAW DFARS 237.173-5)

(Applicable to solicitations and contracts for the provision of services)

52.243-1 CHANGES--FIXED-PRICE (AUG 1987)

(IAW FAR 43.205(a)(1)) (Applicable to fixed-price supplies)

52.243-1 CHANGES--FIXED-PRICE -- ALTERNATE II (APR 1984)

(IAW FAR 43.205(a)(3)) (Applicable to services (other than architect-engineer services, transportation, or research and development) and some supplies)

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991)

(IAW DFARS 243.205-70)

(Applicable to fixed-price efforts)

52.244-6 SUBCONTRACTS FOR COMMERCIAL ITEMS (DEC 2013)

(IAW FAR 44.403)

(Applicable to supplies or services other than commercial items)

252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013)

(IAW DFARS 244.403)

(Applicable to solicitations and contracts for supplies or services other than commercial items that contain any of the clauses listed in the clause at 252.244-7000)

52.247-1 COMMERCIAL BILL OF LADING NOTATIONS (FEB 2006)

(IAW FAR 47.104-4(a), FAR 47.104-4(b)) (Applicable when fixed-price f.o.b. origin or Cost-reimbursement are specified)

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA (JUN 2013)

(IAW DFARS 247.574(b)(1)) (Applicable when procedures other than for direct purchase of ocean transportation services are utilized)

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA -- ALTERNATE III (MAY 2002)

(IAW DFARS 247.574(b)(4)) (Applicable at or below the simplified acquisition threshold)

52.249-1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED-PRICE) (SHORT

FORM) (APR 1984)

(IAW FAR 49.502(a)(1))

(Applicable at the simplified acquisition threshold or less, except as specified in FAR 49.502(a)(1)(i), (ii), (iii) or (iv))

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

(IAW FAR 52.107(b)) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

Regulations URLs: (Click on the appropriate regulation.)

http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/far1toc.htm http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/dfars/dfarTOC.htm http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/af_afmc/affars/affar1toc.htm

NOTE: After selecting the appropriate regulation above, at the "Table of Contents" page, conduct a search for the desired regulation reference using your browser's FIND function. When located, click on the regulation reference (hyperlink).

52.253-1 COMPUTER GENERATED FORMS (JAN 1991)

(IAW FAR 53.111)

(Applicable when requiring the contractor to submit data on Standard or Optional Forms prescribed by this regulation;

and, unless prohibited by agency regulations, forms prescribed by agency supplements)

PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

SECTION J

LIST OF ATTACHMENTS

Form Number Description/File Name Date Number of Pages FAT00009.pdf First Artical

27MAR2014

14-00009 SQR.pdf

SQR

27MAR2014

CDRL CAV AF 00009 (4).pdf

CDRL CAV AF

27MAR2014

CDRL Test Report 00009.pdf CDRL Test Report

27MAR2014

1340548_TRNSPDATA_REPORT.pdf Report

27MAR2014

1340754_PKGRQMT_REPORT.pdf Report

27MAR2014

1340535_PWS_ATTACH.pdf Performance Work Statement

23SEP2013 26

1282856_ITMDESC_REPORT.pdf Report

27MAR2014

PART IV - REPRESENTATIONS AND INSTRUCTIONS

SECTION K

REPRESENTATIONS, CERTIFICATIONS, AND OTHER STATEMENTS

OF OFFERORS OR RESPONDENTS

252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(NOV 2011)

(IAW DFARS 203.171-4(b))

(Applicable to all solicitations, including solicitations for task and delivery orders)

52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JAN 2014)

(IAW FAR 4.1202)

(a)(1) The North American Industry Classification System (NAICS) code for this acquisition is 336413 .

(2) The small business size standard is 1,000 .

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.

(2) If the provision at 52.204-7 is not included in this solicitation, and the offeror is currently registered in the System for Award Management (SAM), and has completed the Representations and Certifications section of SAM electronically, the offeror may choose to use paragraph (d) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The offeror shall indicate which option applies by checking one of the following boxes:

[ ] (i) Paragraph (d) applies.

[ ] (ii) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

(c) (1) The following representations or certifications in SAM are applicable to this solicitation as indicated:

(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless—

(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;

(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.

(iii) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management.

(iv) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that—

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(v) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations—Representation.

This provision applies to solicitations using funds appropriated in fiscal years 2008, 2009, 2010, or 2012.

(vi) 52.209-5, Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(vii) 52.214-14, Place of Performance--Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.

(viii) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(ix) 52.219-1, Small Business Program Representations (Basic & Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas.

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

(x) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas.

(xi) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity.

(xii) 52.222-25, Affirmative Action Compliance. This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity.

(xiii) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items.

(xiv) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of USDA-designated items; or include the clause at 52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts.

(xv) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA- designated items.

(xvi) 52.225-2, Buy American Act Certificate. This provision applies to solicitations containing the clause at 52.225-1.

(xvii) 52.225-4, Buy American Act--Free Trade Agreements--Israeli Trade Act Certificate. (Basic, Alternate I, II, and III.) This provision applies to solicitations containing the clause at 52.225- 3.

(A) If the acquisition value is less than $25,000, the basic provision applies.

(B) If the acquisition value is $25,000 or more but is less than $50,000, the provision with its Alternate I applies.

(C) If the acquisition value is $50,000 or more but is less than $79,507, the provision with its Alternate II applies.

(D) If the acquisition value is $79,507 or more but is less than $100,000, the provision with its Alternate III applies.

(xviii) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225-5.

(xix) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan--Certification.

This provision applies to all solicitations.

(xx) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran—Representation and Certifications. This provision applies to all solicitations.

(xxi) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to—

(A) Solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions; and

(B) For DoD, NASA, and Coast Guard acquisitions, solicitations that contain the clause at 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns.

(2) The following certifications are applicable as indicated by the Contracting Officer:

[Contracting Officer check as appropriate.]

(i) 52.219-22, Small Disadvantaged Business Status.

__ (A) Basic.

__ (B) Alternate I.

X __ (ii) 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.

(see note) (iii) 52.222-48, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment Certification. ). (Note: If this clause is applicable it will be listed in the appropriate clause section of this document.)

__ (iv) 52.222-52 Exemption from Application of the Service Contract Act to Contracts for Certain

Services--Certification.

(see note)_ (v) 52.223-9, with its Alternate I, Estimate of Percentage of…