5AXS questions.docx
DOCX document 15 KB Posted
- Attached to
- 5-Axis Simultaneous CNC Mill Federal contract opportunity
- Solicitation number
- FA8227-24-Q-5AXS
About this file
This document is a combined synopsis/solicitation for the acquisition of a 5-Axis Simultaneous CNC Mill (Solicitation No. FA8227-24-Q-5AXS) issued by the Department of the Air Force Materiel Command Air Force Sustainment Center.
The solicitation requires the contractor to provide a Mazak Variaxis C-600 5-Axis Vertical Machining Center and associated equipment, including a spindle, tool magazine, application support, chip conveyor, and other accessories. The machine must meet specific technical requirements, such as the ability to machine Inconel, Titanium, Aluminum, and other materials, and have dimensional constraints for delivery and installation. The delivery is required within 8 months after receipt of order, FOB Destination. The acquisition is set aside for small businesses, and the award will be made on a Lowest Price Technically Acceptable basis. Offers are due by March 25, 2024, and must be submitted via email.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| PD for 5-Axis Mill 809MXSS 20240312.docx | DOCX document | |
| solicitation 2.docx | DOCX document | |
| 5 AXIS QUESTIONS.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FA8227-24-Q-5AXS Questions and Answers:
1. Did the Spec or Scope of work change?
Yes, the new Product Description attached to the SAM posting included the following specs in Part 3.3:
3.3.15 Must include a chip conveyor with a left-hand discharge.
3.3.16 Must be able to machine Inconel’s, Titanium, Aluminum, Mild and tool steels.
3.3.17 Must be able to be lifted 3 feet off the ground and placed on a dock upon arrival, accommodating a 115” high door while on rollers. The machine can be no wider than 132” during installation.
3.3.18 The machine layout dimensions cannot exceed 153.5” wide, 136.25” deep, and 120” maximum height. Dimensions must include the size of auxiliary equipment, all open doors, and the chip conveyor.
PD part 4.1 was also changed: The contractor shall deliver the 5-Axis Mill. The contractor all be responsible for the crating and shipment of 5-Axis Mill to its destination IAW standard commercial practice. Shipping must be FOB Destination.
File details come from the government source that posted it. Updated .