SPI_PHST_337.pdf

SPECIAL PACKAGING INSTRUCTION (SPI)

(DEVELOPED IN ACCORDANCE WITH MIL-STD-2073-1E)

NAVAL PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION (PHST) CENTER

NAVAL SURFACE WARFARE CENTER (NSWC)

INDIAN HEAD EXPLOSIVE ORDNANCE DISPOSAL TECHNOLOGY DIVISION (IHEODTD)

DETACHMENT PICATINNY, BUILDING 458, WHITTEMORE AVE., PICATINNY ARSENAL, NJ, 07806-5000 http://www.navsea.navy.mil/Home/WarfareCenters/NSWCIndianHeadEODTechnology/WhatWeDo/ TechnicalDepartments/SystemsIntegration/PHST.aspx

1. SPI NUMBER

SPI-PHST-337

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER (NSN)-DODIC-NALC

1377-01-659-3166 - JN55

5. CAGE NO. - PART/DRAWING NUMBER

30003 - 3315AS462

6. CAGE

040L3

7. NOMENCLATURE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE LINEAR

8. UNIT OF ISSUE

EACH

9. QTY PER UNIT PACK (U/P)

ONE

10. UNIT PACK WEIGHT (LB)

20.00

11. UNIT PACK CUBE (CU FT)

3.52

12. UNIT PACK OUTSIDE DIMENSIONS (LWH INCHES)

28.00 X 28.00 X 7.75

13. METHOD OF PRESERVATION

PRESERVATION SHALL BE IN ACCORDANCE WITH (IAW) THIS SPI

14. ICQ

N/A

15. SPECIAL MARKING CODE

MARKINGS SHALL BE IAW THIS SPI

16a. LEVEL A PACKING N/A

16b. LEVEL B PACKING N/A

17a. LEVEL A PACKING CLOSURE N/A

17b. LEVEL B PACKING CLOSURE N/A

18. FIBERBOARD BOX WEIGHT (LBS)

6.40

19. FIBERBOARD BOX CUBE (CU FT)

3.52

20. FIBERBOARD BOX OUTSIDE DIMENSIONS (LWH

INCHES)

28.00 X 28.00 X 7.75

21. QUALIFICATION TEST REPORT - LOCKHEED MARTIN TEST REPORT NUMBER HZ-033

FIGURE 1

FIGURE 1. - FIBERBOARD BOX

22. SIGNATURES/APPROVALS/REVISIONS

BASIC

OR

REVISION

DESCRIPTION OF CHANGES

(REVISIONS ONLY)

NOSSA HAZARD CLASSIFICATION

CODE N851

NSWC IHEODTD CAD/PAD

SENIOR ENGINEER, CODE E2

DIRECTOR, NAVAL PHST CENTER,

NSWC IHEODTD DET PICATINNY,

CODE G1, A. V. STANTON (ACTING)

BASIC ------------------------------

DISTRIBUTION A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

http://www.navsea.navy.mil/Home/WarfareCenters/NSWCIndianHeadEODTechnology/WhatWeDo/TechnicalDepartments/SystemsIntegration/PHST.aspx http://www.navsea.navy.mil/Home/WarfareCenters/NSWCIndianHeadEODTechnology/WhatWeDo/TechnicalDepartments/SystemsIntegration/PHST.aspx

1. SPI NUMBER

SPI-PHST-337

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-659-3166

5. CAGE NO. - PART/DRAWING NUMBER

30003 - 3315AS462

6. CAGE

040L3

7. NOMENCLATURE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE

LINEAR

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

23. BILL OF MATERIALS

ITEM

NO.

QTY

REQD

MATERIAL DESCRIPTION SIZE MATERIAL SPECIFICATION/PART NUMBER/NSN

1. AR CUSHIONING MATERIAL, PACKAGING

(FLEXIBLE CLOSED CELL PLASTIC FILM,

BUBBLE WRAP)

0.50" THICK HTTPS://WWW.ULINE.COM/PRODUCT/DETAIL/S-13056/

ANTI-STATIC-BUBBLE/ANTI-STATIC-UPSABLE-

BUBBLE-ROLL-1-2-24-X-125-

PERFORATED?KEYWORDS=S-13056

ULINE ANTI-STATIC BUBBLE ROLL P/N S-13056

PPP-C-795D, CLASS 2 (STATIC DISSIPATIVE)

2. AR ULINE 3M 40 PR ANTISTATIC UTILITY

TAPE

2.00" WIDE HTTPS://WWW.ULINE.COM/PRODUCT/DETAIL/S-13038/

ANTI-STATIC-TAPES/3M-40-ANTI-STATIC-TAPE-NO-

PRINT-2-X-72-YARDS

ULINE 3M 40 PR ANTISTATIC UTILITY TAPE P/N S-13038

3. 2 CORRUGATED FIBERBOARD SHEET 24.00" X 24.00" APPROX ASTM D4727/D4727M, TYPE CF, CLASS DOMESTIC, VARIETY SINGLEWALL, GRADE 350

4. AR PRESSURE-SENSITIVE TAPE FOR

PACKAGING, FILAMENT-REINFORCED

2.00" WIDE HTTPS://WWW.ULINE.COM/PRODUCT/DETAIL/S-3300/

3M-STRAPPING-TAPE/3M-8934-ECONOMY-STRAPPING-

TAPE-2-X-60-YDS

ASTM D5330/D5330M, TYPE III (HIGH TENSILE

STRENGTH)

5. 2 PLYWOOD STIFFENER 25.00" X 25.00" X 3/8" A-A-55057, TYPE A (CONSTRUCTION AND INDUSTRIAL

PLYWOOD)

6. 1 BARRIER BAG, HEAT-SEALABLE 32.00" X 32.00" APPROX HTTPS://WWW.PROTECTIVEPACKAGING.NET/

PRODUCT/PROTECT-STAT-100M-MIL-PRF-81705-TIII-C2

PROTECTIVE PACKAGING CORP. PROTECT STAT 100M

BAG

MIL-DTL-117 TYPE II (MEDIUM DUTY), CLASS H

(WATERPROOF, ELECTROSTATIC PROTECTIVE, AND

ELECTROSTATIC SHIELDING), STYLE II

(TRANSPARENT)

7. AR WEATHERPROOF LABELS FOR INKJET OR

LASER PRINTERS

HTTPS://WWW.ONLINELABELS.COM/SITEMAP.ASPX

NONMETALLIC, PRESSURE SENSITIVE BACKING OR

COMMERCIAL EQUIVALENT

8. 1 CORRUGATED FIBERBOARD BOX 28.00" X 28.00" X 7.75" HTTPS://WWW.ULINE.COM/PRODUCT/DETAIL/S-20543/

CORRUGATED-BOXES-200-TEST/28-X-28-X-8-

CORRUGATED-BOXES

ULINE P/N S-20543 OR EQUIVALENT

ASTM D 5118 - STYLE RSC, TYPE CF, CLASS WR,

VARIETY SW, GRADE V3C

9. AR PRESSURE-SENSITIVE TAPE FOR

PACKAGING, BOX CLOSURE, AND

SEALING

3.00" WIDE ASTM D5486/D5486M, TYPE V (WEATHER-RESISTANT,

PAPER BACKED)

10. 1 CARGO AIRCRAFT ONLY LABEL 4.00" X 4.00" HTTPS://WWW.ULINE.COM/PRODUCT/DETAIL/S-14590/

ULINE P/N S-14590 OR EQUIVALENT

11. 1 HAZMAT LABEL: EXPLOSIVE 1.4D 4.00" X 4.00" HTTPS://WWW.ULINE.COM/PRODUCT/DETAIL/S-5244/

ULINE P/N S-5244 OR EQUIVALENT

12. 1 PRESSURE-SENSITIVE ADHESIVE LABELS

FOR BAR CODING

(2DBC - TWO DIMENSIONAL BAR CODE)

MIL-PRF-61002B GRADE A, STYLE 2, COMPOSITION (b)

OR EQUIVALENT

HTTPS://WWW.ONLINELABELS.COM/SITEMAP.ASPX

HTTPS://WWW.ULINE.COM/PRODUCT/DETAIL/S-5244/

https://www.uline.com/Product/Detail/S-13056/Anti-Static-Bubble/Anti-Static-UPSable-Bubble-Roll-1-2-24-x-125-Perforated?keywords=s-13056 https://www.uline.com/Product/Detail/S-14590/ https://www.uline.com/Product/Detail/S-13038/Anti-Static-Tapes/3M-40-Anti-Static-Tape-No-Print-2-x-72-yards https://www.uline.com/Product/Detail/S-20543/Corrugated-Boxes-200-Test/28-x-28-x-8-Corrugated-Boxes https://www.uline.com/Product/Detail/S-3300/3M-Strapping-Tape/3M-8934-Economy-Strapping-Tape-2-x-60-yds https://www.protectivepackaging.net/product/protect-stat-100m-mil-prf-81705-tiii-c2

SPI-PHST-337

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-659-3166

5. CAGE NO. - PART/DRAWING NUMBER

30003 - 3315AS462

6. CAGE

040L3

7. NOMENCLATURE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE

LINEAR

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

13. 1 MATERIAL CONDITION TAG OR LABEL:

• SERVICEABLE

• SUSPENDED

• TEST/MODIFICATION

• UNSERVICEABLE (REPAIRABLE)

• UNSERVICEABLE (CONDEMNED)

MIL-STD-129:

• DD FORM 1574 (TAG), DD FORM 1574-1 (LABEL)

• DD FORM 1575 (TAG), DD FORM 1575-1 (LABEL)

• DD FORM 1576 (TAG), DD FORM 1576-1 (LABEL)

• DD FORM 1577-2 (TAG), DD FORM 1577-3 (LABEL)

• DD FORM 1577 (TAG), DD FORM 1577-1 (LABEL)

14. AR TRACEABLE SEAL, WEATHERPROOF NAVSEA DRAWING 8601830, SEE FIGURE 5

15. AR COMPOUND, OBLITERATING, AEROSOL NSN 8010-00-582-4743

24. REMARKS

A. SAFETY PRECAUTIONS: EXPLOSIVE DEVICES SHALL BE HANDLED, STORED, AND SHIPPED IAW THE GENERAL SAFETY PRECAUTIONS GIVEN IN THE SAFETY SUMMARY OF NAVAIR 11-100-1.1 FLEET SUPPORT FOR IN-SERVICE CARTRIDGES, CARTRIDGE ACTUATED

DEVICES (CADS) AND PROPELLANT ACTUATED DEVICES (PADS).

B. THE BAR CODE SYMBOLOGY AND HUMAN READABLE INFORMATION (HRI) THAT ARE TO BE APPLIED SHALL BE IAW MIL-STD-129.

C. EMPTY FIBERBOARD BOX WEIGHT: 6.34 LBS.

D. ICQ - INTERMEDIATE CONTAINER QUANTITY.

E. NAVSUP P-805 - AMMUNITION SENTENCING PUBLICATION.

F. NAVSEA SW020-AC-SAF-010 - TRANSPORTATION AND STORAGE DATA FOR AMMUNITION, EXPLOSIVES, AND RELATED HAZARDOUS

MATERIALS.

G. 49 CFR - SUBPART E - LABELING 172.406: PLACEMENT OF LABELS.

H. MIL-STD-2073-1 - DEPARTMENT OF DEFENSE STANDARD PRACTICE FOR MILITARY PACKAGING.

I. UNIT PACK: THE FIRST TIE, WRAP, OR CONTAINER APPLIED TO A SINGLE ITEM, OR A QUANTITY THEREOF, OR TO A GROUP OF ITEMS OF A SINGLE STOCK NUMBER, PRESERVED OR UNPRESERVED, WHICH CONSTITUTES A COMPLETE OR IDENTIFIABLE PACKAGE. A UNIT PACK IS ALSO OFTEN REFERRED TO AS A ‘PACKAGE’ OR MERELY AS A “PACK”. HTTP://WWW.DLA.MIL/LANDANDMARITIME/

OFFERS/SERVICES/TECHNICALSUPPORT/LOGISTICS/PACKAGING/DEFINITIONS.ASPX.

J. PERFORMANCE ORIENTED PACKAGING (POP) CERTIFICATION REQUIREMENT: IF CONTRACTUALLY REQUIRED, THE CONTRACTOR SHALL BE RESPONSIBLE FOR PERFORMANCE OF TESTING, AND SHALL ACQUIRE DATA NECESSARY TO SUPPORT COMPLIANCE WITH POP REQUIREMENTS OF HAZARDOUS MATERIALS AS DEFINED IN TITLE 49, CODE OF FEDERAL REGULATIONS (CFR), THE INTERNATIONAL MARITIME ORGANIZATION’S INTERNATIONAL MARITIME DANGEROUS GOODS (IMDG) CODE, AND THE INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE TRANSPORT OF DANGEROUS GOODS. TESTING SHALL BE PERFORMED IN ACCORDANCE WITH AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) D4919, TESTING OF HAZARDOUS MATERIAL PACKAGING.

K. AS THE HANDLING SAFETY OF CARTRIDGES WHEN HANDLED OUTSIDE OF AN APPROVED AREA HAS NOT BEEN ESTABLISHED, THE PACKING OF CARTRIDGES SHOULD ONLY BE DONE IN AN APPROVED AREA WHERE THE ELECTRO-MAGNETIC EFFECTS (EME) LEVELS DO NOT EXCEED THE MAXIMUM ALLOWABLE ENVIRONMENTS ESTABLISHED FOR EXPOSURE OF HERO UNSAFE ORDNANCE.

23. BILL OF MATERIALS (CONTINUED)

ITEM

NO.

QTY

REQD

MATERIAL DESCRIPTION SIZE MATERIAL SPECIFICATION/PART NUMBER/NSN

http://www.dla.mil/landandmaritime/offers/services/technicalsupport/logistics/packaging/definitions.aspx http://www.dla.mil/landandmaritime/offers/services/technicalsupport/logistics/packaging/definitions.aspx http://www.dla.mil/landandmaritime/offers/services/technicalsupport/logistics/packaging/definitions.aspx

SPI-PHST-337

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-659-3166

5. CAGE NO. - PART/DRAWING NUMBER

30003 - 3315AS462

6. CAGE

040L3

7. NOMENCLATURE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE

LINEAR

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

(REMAINDER OF PAGE INTENTIONALLY LEFT BLANK)

TABLE 1: EQUIPMENT LIST

NO. NOMENCLATURE NSN/PART NUMBER QUANTITY

1 HEAT SEALING EQUIPMENT LOCAL SUPPLY 1

2 VACUUM EQUIPMENT LOCAL SUPPLY 1

SPI-PHST-337

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-659-3166

5. CAGE NO. - PART/DRAWING NUMBER

30003 - 3315AS462

6. CAGE

040L3

7. NOMENCLATURE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE

LINEAR

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

ORDER OF PRECEDENCE. IN THE EVENT OF A CONFLICT BETWEEN THE TEXT OF THIS DOCUMENT AND OTHER PUBLISHED REFERENCES, THE TEXT OF THIS DOCUMENT TAKES PRECEDENCE. NOTHING IN THIS DOCUMENT, HOWEVER, SUPERSEDES APPLICABLE LAWS AND REGULATIONS UNLESS A SPECIFIC EXEMPTION HAS BEEN OBTAINED.

SAFETY PRECAUTIONS. EXPLOSIVE DEVICES SHALL BE HANDLED, STORED, AND SHIPPED IN ACCORDANCE WITH THE GENERAL SAFETY PRECAUTIONS GIVEN IN THE SAFETY SUMMARY OF NAVAIR 11-100-1.1, FLEET SUPPORT FOR IN-SERVICE CARTRIDGES, CARTRIDGE ACTUATED DEVICES (CADS), AND PROPELLANT ACTUATED DEVICES (PADS).

NOTE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE LINEAR HEREINAFTER

WILL BE REFERRED TO AS THE ASSEMBLY.

1. INSPECT ASSEMBLY TO BE PACKED FOR DEFECTS WHICH MAY AFFECT ITS FUNCTION. NOTIFY SUPERVISOR IF

ASSEMBLY IS SUSPECT.

FIGURE 2

FIGURE 2. PACKING DETAILS

SPI-PHST-337

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-659-3166

5. CAGE NO. - PART/DRAWING NUMBER

30003 - 3315AS462

6. CAGE

040L3

7. NOMENCLATURE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE

LINEAR

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

2. USING PACKING MATERIAL (BUBBLE WRAP), ITEM 1, ENCASE THE ASSEMBLY WITH BUBBLE WRAP AND SECURE

WITH TWO (2") INCH WIDE ANTI-STATIC TAPE, ITEM 2.

3. PLACE THE BUBBLE WRAPPED ASSEMBLY BETWEEN TWO (2) CORRUGATED FIBERBOARD SHEETS, ITEM 3, AND

SECURE CORNERS WITH TWO (2") INCH WIDE HIGH TENSILE STRENGTH TAPE, ITEM 4.

4. PLACE ASSEMBLY WITH CORRUGATED FIBERBOARD SHEETS BETWEEN TWO (2) PLYWOOD STIFFENERS, ITEM 5, AND

SECURE CORNERS WITH TWO (2") INCH WIDE HIGH TENSILE STRENGTH TAPE, ITEM 4.

5. USING BARRIER BAG MATERIAL, ITEM 6, FABRICATE THE HEAT-SEALABLE BARRIER BAG, CUT TO DIMENSIONS

THIRTY-TWO (32") INCHES LONG BY THIRTY-TWO (32") INCHES WIDE.

6. OBTAIN LABEL, ITEM 7, AND PRINT THE FOLLOWING INFORMATION ON LABEL IN ACCORDANCE WITH MIL-STD-129

REQUIREMENTS.

NOTE

WORDS SUCH AS “NSN”, “ITEM DESCRIPTION”, AND “QUANTITY” SHALL

NOT BE INCLUDED AS PART OF THE IDENTIFICATION MARKINGS.

MARKING LOCATIONS ON CONTAINER SHALL BE IAW MIL-STD-129.

NOTE

LETTERING/MARKINGS SHALL BE IN CAPITAL LETTERS OF EQUAL

HEIGHT, CLEARLY VISIBLE, AND LARGEST SIZE PRACTICAL FOR

PACKAGE SIZE WITHIN ACCEPTABLE RANGE. WHEN MARKING SPACE

PERMITS, STENCILED OR PRE-PRINTED MARKINGS SHALL NOT BE LESS

THAN 3/32 OF AN INCH.

A. NSN: 1377-01-659-3166, DODIC: JN55

B. QUANTITY AND ITEM DESCRIPTION: 1 CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE LINEAR

C. PART NUMBER: 3315AS462

D. SER NUMBER - (INSERT SERIAL NO.): “SER” SHALL PRECEDE SERIAL NUMBER

E. LOT NUMBER - (INSERT LOT NO.): THE WORD “LOT” SHALL PRECEDE LOT NUMBER

7. INSTALL LABEL ON BARRIER BAG.

8. INSERT THE PACKED ASSEMBLY IN BARRIER BAG AND FOLD OVER THE OPEN END OF BAG A MINIMUM OF ONE AND

A HALF INCHES (1.5") AND HEAT SEAL CLOSED WITH APPROPRIATE TYPE EQUIPMENT.

SPI-PHST-337

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-659-3166

5. CAGE NO. - PART/DRAWING NUMBER

30003 - 3315AS462

6. CAGE

040L3

7. NOMENCLATURE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE

LINEAR

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

FIGURE 3

FIGURE 3. FINAL PACKAGING DETAILS

CAUTION

ASSEMBLY NEEDS TO BE SECURELY CENTERED INSIDE THE FIBERBOARD

BOX WITH A MINIMUM OF ONE INCH (1") OF PACKING MATERIAL

(BUBBLE WRAP) ON THE TOP, BOTTOM, AND SIDES.

9. OPEN FIBERBOARD BOX, ITEM 8, AND PLACE PACKING MATERIAL (BUBBLE WRAP), ITEM 1, IN BOTTOM OF

FIBERBOARD BOX IN EACH DIRECTION EXTENDING AS LONG AS THE BOX FLAPS.

10. CAREFULLY PLACE THE SEALED BARRIER BAG CONTAINING THE ASSEMBLY CENTERED INSIDE THE

FIBERBOARD BOX.

11. FOLD OVER PACKING MATERIAL (BUBBLE WRAP) TO FULLY COVER THE ASSEMBLY.

12. CLOSE FIBERBOARD BOX AND SEAL ALL SEAMS, CORNERS, AND JOINTS OF THE BOX, WITH THREE (3") INCH

WIDE TAPE, ITEM 9, AS SHOWN IN FIGURE 4.

SPI-PHST-337

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-659-3166

5. CAGE NO. - PART/DRAWING NUMBER

30003 - 3315AS462

6. CAGE

040L3

7. NOMENCLATURE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE

LINEAR

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

FIGURE 4

FIGURE 4. FIBERBOARD BOX SEALED

13. THE FOLLOWING INFORMATION SHALL BE APPLIED ON PRE-PRINTED LABELS, ITEM 7. LABELS SHOULD BE BLACK LETTERS ON A WHITE BACKGROUND. LABELS MUST BE PLACED ON EXTERIOR OF FIBERBOARD BOX AS

SHOWN IN FIGURE 6.

NOTE

WORDS SUCH AS “NSN”, “ITEM DESCRIPTION”, AND “QUANTITY” SHALL

NOT BE INCLUDED AS PART OF THE IDENTIFICATION MARKINGS.

MARKING LOCATIONS ON CONTAINER SHALL BE IAW MIL-STD-129.

NOTE

LETTERING/MARKINGS SHALL BE IN CAPITAL LETTERS OF EQUAL

HEIGHT, CLEARLY VISIBLE, AND LARGEST SIZE PRACTICAL FOR

PACKAGE SIZE WITHIN ACCEPTABLE RANGE. WHEN MARKING SPACE

PERMITS, STENCILED OR PRE-PRINTED MARKINGS SHALL NOT BE LESS

THAN 3/32 OF AN INCH.

A. NATIONAL STOCK NUMBER (NSN): 1377-01-659-3166, AND DOD IDENTIFICATION CODE (DODIC): JN55 SHALL BE

PLACED ON THE SAME LINE.

B. PART NUMBER: 3315AS462

C. QUANTITY/UNIT OF ISSUE. THE QUANTITY ALWAYS PRECEDES THE ITEM DESCRIPTION (NOMENCLATURE) ON

THE SAME LINE: 1 CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE LINEAR.

D. CONTRACT/PURCHASE ORDER NUMBER - (INSERT CONTRACT/PURCHASE ORDER NUMBER), IF APPLICABLE

SPI-PHST-337

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-659-3166

5. CAGE NO. - PART/DRAWING NUMBER

30003 - 3315AS462

6. CAGE

040L3

7. NOMENCLATURE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE

LINEAR

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

E. WEIGHT AND CUBE. THE CAPITAL LETTERS “WT” SHALL PRECEDE THE NUMERICAL GROSS WEIGHT IN POUNDS FOLLOWED WITH THE ABBREVIATION FOR POUNDS “LBS”. FRACTIONAL WEIGHTS SHALL BE ROUNDED UP TO THE NEXT WHOLE POUND. THE CAPITAL LETTERS “CU” SHALL PRECEDE THE NUMERICAL CUBE IN FEET, ROUNDED TO NEXT WHOLE DIGIT.

F. LOT NUMBER (SIDE OF CONTAINER). THE LOWER MOST MARKING ON THE PACKAGE SIDE CONTAINING THE ITEM NOMENCLATURE SHALL BE THE AMMUNITION LOT NUMBER. THE LOT NUMBER SHALL BE PRECEDED BY THE WORD “LOT” AND SHALL BE UNDERLINED WITH A SOLID LINE APPROXIMATELY 1/8 INCH THICK. IF A SERIAL NUMBER IS REQUIRED FOR THE ITEM(S) THE WORD “SER” AND THE SPECIFIC NUMBER(S) SHALL BE MARKED

ABOVE THE LOT NUMBER.

G. DODIC AND LOT NUMBER - BOTH ENDS OF OUTER CONTAINER SHALL BE MARKED WITH JN55 AND APPROPRIATE LOT NUMBER. THE LOT NUMBER ON OUTER CONTAINER ENDS SHALL NOT BE PRECEDED BY THE WORD “LOT”

OR UNDERLINED.

H. IF APPLICABLE, FOR AIR SHIPMENTS, NET EXPLOSIVE WEIGHT (N.E.W.) - 0.025855 KG.

I. CARGO AIRCRAFT ONLY LABEL, ITEM 10.

J. REUSABLE CONTAINER - DO NOT DESTROY.

NOTE

THE FOLLOWING MARKINGS MUST BE UNOBSCURED BY LABELS OR

ATTACHMENTS; AND MUST BE LOCATED AWAY FROM ANY OTHER

MARKING THAT COULD SUBSTANTIALLY REDUCE ITS EFFECTIVENESS.

K. DOT LABEL FOR EXPLOSIVES 1.4D, ITEM 11.

L. UNITED NATIONS (UN) PROPER SHIPPING NAME (PSN) AND UN IDENTIFICATION NUMBER - CHARGES, SHAPED, FLEXIBLE, LINEAR - UN0237.

M. VERIFY UN PERFORMANCE-ORIENTED PACKAGING (POP) CERTIFICATION MARKING.

N. MARK SPI NUMBER (SPI-PHST-337) ON CONTAINER (AIR FORCE USE ONLY).

14. IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY CONTRACT OR PURCHASE ORDER, THE CONTAINER SHALL BE TAGGED USING A TWO-DIMENSIONAL BAR CODE (2DBC) LABEL, ITEM 12, IAW MIL-STD-129.

ACTIVITIES THAT DO NOT YET HAVE A 2DBC CAPABILITY BUT HAVE A LINEAR BAR CODE CAPABILITY SHALL CONTINUE TO USE LINEAR BAR CODE IN COMBINATION WITH MATERIAL CONDITION TAGS, ITEM 13. ACTIVITIES

THAT HAVE NO BAR CODE CAPABILITY SHALL CONTINUE TO USE MATERIAL CONDITION TAGS.

SPI-PHST-337

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-659-3166

5. CAGE NO. - PART/DRAWING NUMBER

30003 - 3315AS462

6. CAGE

040L3

7. NOMENCLATURE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE

LINEAR

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

FIGURE 5

FIGURE 5. DRAWING 8601830 TRACEABLE SEAL, WATERPROOF

SPI-PHST-337

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-659-3166

5. CAGE NO. - PART/DRAWING NUMBER

30003 - 3315AS462

6. CAGE

040L3

7. NOMENCLATURE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE

LINEAR

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

NOTE

TRACEABLE SEALS, TYPE 2 MAY BE PRE-PRINTED, STAMPED OR MARKED

WITH THE ACTIVITY SYMBOL OR IDENTIFIER. FOR GOVERNMENT

ACTIVITIES, PREPRINTING OF INDIVIDUAL INSPECTOR INDICATORS IS

NOT AUTHORIZED.

NOTE

NAVY AND MARINE CORPS ACTIVITIES: TYPE 2 TRACEABLE SEALS

APPLIED BY NAVY AND MARINE CORPS ACTIVITIES SHALL INCLUDE

THE ACTIVITY’S UNIT IDENTIFICATION CODE (UIC) AS WELL AS

APPLICATION OF AN INDIVIDUAL INSPECTION INDICATOR STAMP. THE

INSPECTOR INDICATOR STAMP SHALL BE A NUMERIC OR ALPHA-

NUMERIC IDENTIFIER TRACEABLE TO THE INDIVIDUAL ASSIGNED THE

INSPECTION INDICATOR STAMP. AN ACCEPTABLE ALTERNATE METHOD

OF CERTIFYING THE TRACEABLE SEAL IS TO APPLY, WITH A

PERMANENT MARKER, THE INSPECTORS PRINTED NAME, SIGNATURE,

AND ACTIVITY UIC, IF THE UIC IS NOT PREPRINTED.

NOTE

SIZE THE TRACEABLE SEALS SO THAT THE MARKINGS AND LABELS ARE

NOT OBSCURED.

15. USING ITEM 14, FABRICATE TYPE 2 SEALS, SEE FIGURE 5. THE SEALS SHALL BE APPLIED TO THE FIBERBOARD BOX, ITEM 8, SO THAT THEY MUST BE REMOVED, CUT OR DEFACED IN ORDER TO OPEN THE FIBERBOARD BOX

TO REMOVE THE ASSEMBLY.

SPI-PHST-337

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-659-3166

5. CAGE NO. - PART/DRAWING NUMBER

30003 - 3315AS462

6. CAGE

040L3

7. NOMENCLATURE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE

LINEAR

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

YOUR COMMENTS AND QUESTIONS REGARDING THIS DOCUMENT ARE ENCOURAGED. PLEASE RESPOND TO: NAVAL PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION (PHST) CENTER, NAVAL SURFACE WARFARE CENTER (NSWC) INDIAN HEAD EXPLOSIVE ORDNANCE DISPOSAL TECHNOLOGY DIVISION (IHEODTD), DETACHMENT PICATINNY, CODE G11, BUILDING 458, WHITTEMORE AVE., PICATINNY ARSENAL, NJ 07806-5000, E-MAIL ADDRESS: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil

FIGURE 6

FIGURE 6. FIBERBOARD BOX MARKINGS/LABELS

mailto: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil?Subject=SPI-PHST-337 mailto: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil?Subject=SPI-PHST-337

SPI-PHST-337

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-659-3166

5. CAGE NO. - PART/DRAWING NUMBER

30003 - 3315AS462

6. CAGE

040L3

7. NOMENCLATURE

CHARGE ASSEMBLY, SHAPED, RAU-7/A, FLEXIBLE

LINEAR

8. UNIT OF ISSUE

EACH

UNPACKING INSTRUCTIONS

YOUR COMMENTS AND QUESTIONS REGARDING THIS DOCUMENT ARE ENCOURAGED. PLEASE RESPOND TO: NAVAL PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION (PHST) CENTER, NAVAL SURFACE WARFARE CENTER (NSWC) INDIAN HEAD EXPLOSIVE ORDNANCE DISPOSAL TECHNOLOGY DIVISION (IHEODTD), DETACHMENT PICATINNY, CODE G11, BUILDING 458, WHITTEMORE AVE., PICATINNY ARSENAL, NJ 07806-5000, E-MAIL ADDRESS: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil

ORDER OF PRECEDENCE. IN THE EVENT OF A CONFLICT BETWEEN THE TEXT OF THIS DOCUMENT AND OTHER PUBLISHED REFERENCES, THE TEXT OF THIS DOCUMENT TAKES PRECEDENCE. NOTHING IN THIS DOCUMENT, HOWEVER, SUPERSEDES APPLICABLE LAWS AND REGULATIONS UNLESS A SPECIFIC EXEMPTION HAS BEEN OBTAINED.

SAFETY PRECAUTIONS. EXPLOSIVE DEVICES SHALL BE HANDLED, STORED, AND SHIPPED IN ACCORDANCE WITH THE GENERAL SAFETY PRECAUTIONS GIVEN IN THE SAFETY SUMMARY OF NAVAIR 11-100-1.1, FLEET SUPPORT FOR IN-SERVICE CARTRIDGES, CARTRIDGE ACTUATED DEVICES (CADS) AND PROPELLANT ACTUATED DEVICES (PADS).

1. CAREFULLY TRANSPORT FIBERBOARD BOX, ITEM 8, CONTAINING THE ASSEMBLY TO UNPACKING AREA.

2. INSPECT EXTERIOR OF FIBERBOARD BOX FOR EVIDENCE OF TAMPERING. REPORT ANY EVIDENCE TO SUPERVISOR.

3. SLIT TRACEABLE (ANTIPILFERAGE) SEALS SO FIBERBOARD BOX MAY BE OPENED.

4. CAREFULLY CUT OR REMOVE PACKAGING TAPE AND OPEN FIBERBOARD BOX.

5. UNWRAP PACKING MATERIAL (BUBBLE WRAP) AND CAREFULLY REMOVE THE BARRIER BAG FROM FIBERBOARD

BOX.

6. EXERCISE CARE. SLIT OPEN THE BARRIER BAG AND REMOVE THE PACKED ASSEMBLY.

7. REMOVE PLYWOOD STIFFENERS, CORRUGATED FIBERBOARD SHEETS AND UNWRAP PACKING MATERIAL (BUBBLE

WRAP) AND MOVE THE ASSEMBLY TO A DESIGNATED PROCESSING AREA.

WARNING

READ THE SAFETY DATA SHEET (SDS) FOR COMPOUND, OBLITERATING,

AEROSOL. THE PRECAUTIONS, PROCEDURES AND SPECIAL PROTECTION

INFORMATION CONCERNING THE COMPOUND SHALL BE FOLLOWED.

NOTE

EXERCISE CARE NOT TO OBLITERATE CONTAINER UN PERFORMANCE-

ORIENTED PACKAGING (POP) MARKING

8. DO NOT OBLITERATE CONTAINER UN PERFORMANCE-ORIENTED PACKAGING (POP) MARKING. USING COMPOUND, OBLITERATING, AEROSOL, ITEM 15, REMOVE EXPLOSIVE MARKINGS AND ALL PRE-EXISTING CONTENT MARKINGS

THAT INDICATE ASSEMBLY IS PACKED.

9. IF SERVICEABLE, RETAIN FIBERBOARD BOX, BARRIER BAG, AND DUNNAGE FOR FUTURE USE. STENCIL “REUSABLE

BOX, DO NOT DESTROY” ON TOP OF FIBERBOARD BOX, AS SHOWN IN FIGURE 6.

10. DISPOSE OF UNSERVICEABLE FIBERBOARD BOXES AND PACKING MATERIAL IN ACCORDANCE WITH LOCAL

DISPOSAL INSTRUCTIONS.

mailto: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil?Subject=SPI-PHST-337

Text1: 07/24/2019