ATTACHMENT_7C_CDRLs_A031-A045.pdf

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

Draftftftaftaftaftaftaftaftafta ttttttttttt

X014 A

MGMT

T-38C Avionics Component Integration

A031 Management Plan Property Management Plan

DI-MGMT-80004A BLK 16 AFLCMC/WLDMA

N

D

BLK 16

BLK 16

BLK 16

BLK16

AFLCMC/WLDMA 1

6064 Dogwood Ave Bldg 1254 Hill AFB, UT 84056-5816 Attn: Edward Waghorn

0 0

Contractor format is acceptable using Microsoft Office Products.

BLK 5:

CLS PWS Paragraph: 3.8.1

HUD SOO Paragraph:

MDP SOO Paragraph:

ADS-B SOO Paragraph:

VHF SOO Paragraph:

Block 9: Distribution Statement D: Distribution authorized to Department of Defense (DoD) and U.S. DoD contractors for administrative or operational use, determined 12 September 2014. Other requests for a copy of this document shall be referred to AFLCMC/WLDMA.

Warning: This document contains technical data whose export is restricted by the Export Control Act (Title 22, V.S.C., Sec 2751 et seq.) or Executive Order 12470.

Violations of these export laws are subject to severe criminal penalties.

The above Distribution Statement and Warning Notice shall be displayed or affixed to the data in a conspicuous position.

Block's 10, 11, 12, and 13: The initial submission shall be provided within 45 calendar days from contract award and updated as required throughout the contract.

(1 Data Item)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

X014 A MGMT

T-38C Avionics Component Integration

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

a em for further definition of data itemem for furth tion (DID) number, military specificationtion (DID) number, military specificat er listed in DoD 5010.12-L (AMSDL), orer listed in DoD 5010.12-L (AMSDL), data content and format requirements.data content and format requirement g in contract that generates requirement g in contract that generates req of Work paragraph number).of Work paragraph number).

sponsible for ensuring adequacy of thesponsible for ensuring adequacy of the

Estimated Price Costs toPrice those incurred over and above the er and above without conforming to Governming to Gov administrative and other expenseadministrative and other expense delivering such data item to the Govdelivering such data item to the Gov

c. Group III. Definition - Dc. Group III. Definition develop for his internal use in for his internal use contracted effort and does not reqcontracted effort and does not req conform to Government requiremeconform to Government requireme

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

Draftftftaftaftaftaftaftaftafta ttttttttttt

X014 A

SAFT

T-38C Avionics Component Integration

A032 Accident/Incident Report Mishap Reporting

DI-SAFT-81563 BLK 16 AFLCMC/WLDMA

N

D

BLK 16

BLK 16

BLK 16

BLK16

AFLCMC/WLDMA 1

6064 Dogwood Ave Bldg 1254 Hill AFB, UT 84056-5816 Attn: Edward Waghorn

0 0

Contractor format is acceptable using Microsoft Office Products.

BLK 5:

CLS PWS Paragraph: 13.6.7, 13.6.8

HUD SOO Paragraph:

MDP SOO Paragraph:

ADS-B SOO Paragraph:

VHF SOO Paragraph:

Block 9: Distribution Statement D: Distribution authorized to Department of Defense (DoD) and U.S. DoD contractors for administrative or operational use, determined 12 September 2014. Other requests for a copy of this document shall be referred to AFLCMC/WLDMA.

Warning: This document contains technical data whose export is restricted by the Export Control Act (Title 22, V.S.C., Sec 2751 et seq.) or Executive Order 12470.

Violations of these export laws are subject to severe criminal penalties.

The above Distribution Statement and Warning Notice shall be displayed or affixed to the data in a conspicuous position.

BLOCKS 10, 11, 12, and 13: SUBMIT REPORT WITHOUT DELAY IN THE

EVENT OF ANY SERIOUS ACCIDENT OR INCIDENT (I.E. EXPLOSION,

FIRE, FLOOD, PRESSURE RUPTURE, MAJOR MALFUNCTION) WHICH

WILL ADVERSELY AFFECT CAPABILITY TO MEET CONTRACTUAL

OBLIGATIONS. THE REPORT SHALL BE GENERATED BY THE FASTEST

MEANS, GIVING THE INFORMATION REFERRED TO IN DI-SAFT-81563,

PARAGRAPHS 2A-2L.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

X014 A SAFT

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

a em for further definition of data itemem for furth tion (DID) number, military specificationtion (DID) number, military specificat er listed in DoD 5010.12-L (AMSDL), orer listed in DoD 5010.12-L (AMSDL), data content and format requirements.data content and format requirement g in contract that generates requirement g in contract that generates req of Work paragraph number).of Work paragraph number).

sponsible for ensuring adequacy of thesponsible for ensuring adequacy of the

Estimated Price Costs toPrice those incurred over and above the er and above without conforming to Governming to Gov administrative and other expenseadministrative and other expense delivering such data item to the Govdelivering such data item to the Gov

c. Group III. Definition - Dc. Group III. Definition develop for his internal use in for his internal use

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

DRAFTFTFTFTFTFTFTTTTTT

X014 A X

T-38C Avionics Component Integration

A033 Product Drawings/Models & Associated Lists Avionics Component Integration

DI-SESS-81000E BLK 16 AFLCMC/WLDMA

WAWF

A D

BLK 16

BLK 16

BLK 16

BLK16

WAWF 1 1

DoDAAC FA8213

AFLCMC/WLDMA 1 1

6064 Dogwood Ave Bldg 1254

Hill AFB, UT 84056-5816 Attn: Edward Wagho

AFLCMC/WLDEA 1 1

6057 Box Elder Ln Bldg 1285 Hill AFB, UT 84056

AFLCMC/LZPEM

6020 Gum Ln Bldg 1218 Hill AFB, UT 84056 Attn: EDMS

ATD Documents on 1 1

ASC/WNS

2300 D St Wright-Patterson

AFB, OH 45433

4 0

Drawings shall be IAW ASME Y14.100-2013 (including Appendices B,C,D,E)

ASME Y14.24, ASME Y14.3, ASME Y14.34, ASME Y14.35, ASME Y14.41,

and ASME Y14.5.

Blk E. Contract Number: All Drawings, Models, Specifications and Associated Lists shall have the contract number identified on sheet one of each drawing.

Blk 4. Tailoring of DI-SESS-81000E per information in this document and attached MIL-STD-31000A. Technical data package option Selection Worksheet forms a part of this contract data requirements list.

Blk 5.

CLS PWS Paragraph: 3.7.2, 3.10.14, 6.6.3 HUD SOO Paragraph: 3.6.1.D, 4.1.10.B MDP SOO Paragraph: 3.6.1.D, 4.1.10.B ADS-B SOO Paragraph: 3.6.1.D, 4.1.10.B VHF SOO Paragraph, 3.6.1.D, 4.1.10.B

Blk. 7 Electronic receiving report required via INTERNET Side Area Workflow (WAWF) (WAWF at: HTTPS://WAWF.EB.MIL). DoDAAC FA8213.

The electronic receiving report shall be used only for this data item: Do not combine other data item submittals with this requirement.

Blk 9. Distribution Statement D: Distribution authorized to Department of Defense and U.S DoD contractors only for Administrative or Operational Use 24 September 2014. Other requests shall be referred to AFLCMC/WLDEA, Hill

AFB, UT 84056-5811.

Warning - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. 2751 et seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., APP. 2401, et seq.

Violation of these export laws are subject to severe criminal penalties.

Dissemination of this document is controlled under DOD Directive 5230.25.

HANDLING AND DESTRUCTION NOTICE: Comply with distribution statement and destroy by any method that will prevent disclosure of the contents or reconstruction of document

Distribution Statement, Export Control and Destruction Notice shall be on the first sheet of each drawing and associated lists.

1 4

(1 Data Item)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

Page of Pages

A

T-38C Avionics Component Integration

Blk 10 A shipping list shall be provided with each shipment of engineering data. This shipping list shall identify, in alphanumeric document number order, each document furnished in the package. Media shall be paper copies.

Blk 11 As required by Government

Blk 12 and 13.

a. Drawing Preliminary/Draft Copies: The contractor shall submit a digital data sample. preliminary drawings to block 14 addressees for review of format, content and accuracy of drawings 45 calendar days prior to final delivery. AFLCMC/WLDEA requires 15 working days to review drawings and provide comments to AFLCMC/WLDMA for return to the contractor. Subsequent to receipt of government comments, the contractor shall then within 30 days submit corrected digital data preliminary to the block 14 addressees for confirmation of acceptability prior to final delivery. Contractor shall deliver 2-D assembly engineering drawings in PDF and associated list media PDF. Contractor shall deliver CAD model in native file format Unigraphics NX.

9. Tailoring to ASME’s as follows:

ASSME Y14.100-2004

(1). (Application Data) para 4.6 - Application Data is required on firsts sheet of each Drawing and Associated List. General use or multi-use notations is allowed.

(2) (Drawing Notes) para 4.26 - Drawing Notes shall be on first sheet of each drawing.

(3) (Language) para 4.26.1 - Drawings and Associated Lists shall be in the English language.

(4) (Drawing Notes-Contents) para 4.26.6 (f) - Flag note symbol used shall be consistent throughout the entire TDP.

(5) (Drawing Verification and Approval) para 4.27 - For newly created Drawings and Associated Lists contractor signature block format is acceptable provided it meets the requirements of ASME Y14.1. In addition, the following blocks shall be added to signature block: AF Authentication and Approval Date, AF Release and Approval Date. Contractor names shall be used for Checker, Engineer, Engineering Approval, and Drafter. AF names shall be used for AF Authentication and AF Release.

NOTE: AF Authentication and AF Release names will be provided to contractor by the Engineering Data Management Officer from AFLCMC/LZPEM prior to final release of the engineering drawings. In addition, at the time of Government acceptance of TDP, the contractor and government shall sign AF Form 2602 (Engineering Document Release Record) for each newly created Drawings and Associated List. Government will provide AF Form 2602 to the contractor. Release dates on AF Form 2602, Drawings and Associated Lists shall match.

(6) Drawing numbers shall be Air Force drawing numbers that will be assigned by AFLCMC.LZPEX.DraftSupp@Hill.af.mil requesting Air Force Drawing Numbers/Cage Code). All unused AF Drawing Numbers shall be turned back to AFLCMC/LZPEM.

When using Air Force Drawing Number and Cage Code dash numbers shall comply as follows:

Parts Assemblies On PL a -dash # must be identified Shown Opposite Shown Opposite -01 -02 -10 -20 -03 -04 -30 -40 -05 -06 -50 -60 etc etc (do not use dash numbers ending in 9 or 0

ASME Y 14.34M Associated Lists

ASME Y 14.35 M

(1) Redrawn Drawings shall be IAW para. 4.3 sub-para 4.3.2

(2) Revision column shall be IAW para 6.1 sub-para 6.1.2 & 6.1.3 Contractor shall maintain revision history in its entirety.

(3) Revision Letters shall be IAW para 7.1, sub-paras 7.1.1 (a), (b), (d), & (e), and para 7.2, sub-para 7.2.1 (a), (b), & (c).

(4) Revision History Block shall be IAW para 7.1 sub-para 7.1.2 (a) & (b).

(5) Revision status of sheets block shall be IAW para 7.4, sub-para 7.4.2 (a), (b), & (c).

(6) Adding sheets shall be IAW para 7.5 sub-para 7.5.1(a)

(7) Deleting sheets shall be IAW para 7.5 sub-para 7.5.2 (a)

2 4

DRAFT

para 4.26.6 (f) - Flag note symbol used shall be consistent throughout the enpara 4.26.6 (f) - Flag note symbol used shall be consistent throughout the en Approval) para 4.27 - For newly created Drawings and Associated Lists conApproval) para 4.27 - For newly created Drawings and Associated Lists con meets the requirements of ASME Y14.1. In addition, the following blockmeets the requirements of ASME Y14.1. In addition, the following b Approval Date, AF Release and Approval Date. Contractor names shall beApproval Date, AF Release and Approval Date. Contractor names sha fter. AF names shall be used for AF Authentication and AF Release.fter. AF names shall be used for AF Authentication and AF Release.

AF Release names will be provided to contractor by the Engineering DataAF Release names will be provided to contractor by the Engineering l release of the engineering drawings In addition at the time of Governmel release of the engineering drawings In addition at the time of Gov

(1 Data Item)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

Page of Pages

A

T-38C Avionics Component Integration

3 4

ASME Y14.5M

Dimensioning and Tolerancing shall be IAW para 1.6 and shall be decimal inch.

ASME Y14.3-2003

Angle of projection shall be IAW para1.6.1 third angle projection.

ASME Y14.100-2004 INVOKED APPENDICES:

Appendix B- Non Commercial Drawing Practices Appendix C- Drawing Titles Appendix D- Numbering, Coding, and Identification Appendix E- Markings on Engineering Drawings Appendix E- for para E7 see DD1423 Block 9

JEDMICS REQUIREMENTS (Instructions ) for All documents (Drawings and Associated Lists) submitted in PDF Format. Metadata shall be prepared IAW Digital Data Description Requirement document 9579776 Revision L Option 2 Hill Air Force Base.

Contractor shall submit a Digital Data Sample in PDF (including Metadata (indexing file) for Drawings and Associated Lists. Sample shall be submitted on CD ROM to AFLCMC/LZPEM thirty (30) working days prior to final delivery. The Government requires ten

(10) working days for inspection and acceptance of sample files. Metadata shall be submitted in Microsoft Access 2007.AFLCMC/LZPEM will provide Sample Metadata file (including Microsoft Access 2007 database) as an attachment to to CDRL package (Attach - CD ROM).

Final Delivery

(b) Contractor shall submit Drawings and Associated Lists to BLK 14 addressees NLT forty five (45) working days after Government approval of Configuration Baseline. All newly created Drawings and Associated Lists shall be released at the Basic Revision (-). All updated/ revised Drawings and Associated Lists shall be delivered with all outstanding Engineering Change Orders (ECOs) incorporated. Final delivery format shall match sample formats defined above or as agreed upon by the government. Government requires forty five (45) working days for final inspection and acceptance of delivery. CD-ROM label(s) shall be marked with Date, Contract Number, Company Name, Data Item Number and System.

DRAFTwings and Associated Lists to BLK 14 addressees NLT forty five (45) worwings and Associated Lists to BLK 14 addressees NLT forty five (45) line. All newly created Drawings and Associated Lists shall be released atline. All newly created Drawings and Associated Lists shall be releas Associated Lists shall be delivered with all outstanding Engineering ChangAssociated Lists shall be delivered with all outstanding Engineering C rmat shall match sample formats defined above or as agreed upon by the gormat shall match sample formats defined above or as agreed upon by t d f fi l i ti d t f d li CD ROM l b l( ) hd f fi l i ti d t f d li CD ROM l b l

MIL-STD-31000

TDP OPTION SELECTION WORKSHEET

SYSTEM: DATE PREPARED:

A. CONTRACT NO. B. EXHIBIT/ATTACHMENT NO. C. CLIN D. CDRL DATA

ITEM NO(s).

1. TDP Level (X and complete as applicable .)

A. CONCEPTUAL LEVEL

DEVELOPMENTAL LEVEL

PRODUCTION LEVEL

B. REMARKS:

2. TYPE AND FORMAT (X all that apply and complete as applicable .)

A.

TYPE 2D: 2D DRAWINGS

TYPE 3D: 3D MODELS ONLY

TYPE 3D: 3D MODELS WITH

ASSOCIATED 2D DRAWINGS

B.

NATIVE CAD (SPECIFY TYPE) ____________________________________

ISO 10303 STEP FORMAT (Specify STEP PROTOCOL AP203, AP 214 etc.)

ISO 32000 PORTABLE DOCUMENT FORMAT ________________________

OTHER ELECTRONIC FORMAT (SPECIFY TYPE)

HARDCOPY ___________________________________________________

REMARKS : ______________________________________________________

3. CAGE Code AND DOCUMENT

NUMBERS

A. CONTRACTOR CAGE AND DOCUMENT NUMBERS

GOVERNMENT CAGE (COMPLETE 3B & 3C OR 3D)

D. To Be Assigned By:

B. USE CAGE CODE:

C. USE DOCUMENT NUMBERS:

4. DRAWING FORMATS (X one and complete as applicable)

CONTRACTOR FORMAT.

GOVERNMENT FORMAT.

REMARKS: ______________________________________________________________________________________

5. TDP ELEMENTS REQUIRED (X all that apply ) ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR - OR THE FOLLOWING ARE REQUIRED:

CONCEPTUAL DRAWINGS/MODELS AND ASSOCIATED LISTS

DEVELOPMENTAL DESIGN DRAWINGS/MODELS AND ASSOCIATED LISTS

PRODUCT DRAWINGS/MODELS AND ASSOCIATED LISTS

COMMERCIAL DRAWINGS/MODELS AND ASSOCIATED LISTS

QUALITY ASSURANCE PROVISIONS

SPECIAL INSPECTION EQUIPMENT (SIE) DRAWINGS/MODELS AND ASSOCIATED LISTS

SPECIAL TOOLING (ST) DRAWINGS/MODELS AND ASSOCIATED LISTS

SPECIFICATIONS

SOFTWARE DOCUMENTATION

SPECIAL PACKAGING INSTRUCTIONS (SPI) DRAWINGS/MODELS AND ASSOCIATED LISTS

6. ASSOCIATED LIST (X and complete as applicable)

A. PARTS LIST (X ONE) (1) INTEGRAL (2) SEPARATE

B. DATA LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

C. INDEX LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) D. WIRING LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) E. INDENTURED DATA LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) F. APPLICATION LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

7. APPLICABILITY OF STANDARDS. The following Standards apply: (X as applicable)

ASME Y14.100

ENGINEERING DRAWING

PRACTICES

WITH APPENDICES:

B C D E

ASME Y14.24 TYPES AND APPLICATIONS OF

ENGINEERING DRAWINGS

ASME Y14.34 ASSOCIATED LIST

ASME Y14.35M REVISION OF ENGINEERING

DRAWINGS AND ASSOCIATED LIST

ASME Y14.41 DIGITAL PRODUCT DEFINITION DATA

PRACTICES

ASME Y14.5 DIMENSIONING AND TOLERANCING

OTHER STANDARDS

APPLY AS

DESCRIBED:

COMPANY STANDARDS

PERMITTED YES NO

8. OTHER TAILORING (Attach additional sheets as necessary)

FIGURE 1: TDP Option Selection Worksheet

Siemens NX

Adobe text searchable .pdf format

98747

DRAFTRED TO BE DETERMINED BY CONTRED TO BE DETERMINED BY C RACTOR - OR THE FOLLOWING ARE REQUACTOR - OR THE FOLLOWING ARE

AWINGS/MODELS AND ASSOCIATED LISTS AWINGS/MODELS AND ASSOCIATED LISTS

DESIGN DRAWINGS/MODELS AND ASSOCIATED LISTSDESIGN DRAWINGS/MODELS AND ASSOCIATED LIST

NGS/MODELS AND ASSOCIATED LISTS NGS/MODELS AND ASSOCIATED LIST

AWINGS/MODELS AND ASSOCIATED LISTSAWINGS/MODELS AND ASSOCIATEDDRAFTEQUIRED (X all that apply ) EQUIRED (X all that apply ) DRAFTDRAFT

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

Aption (DID) number, military specificationption (DID) number, military specification ber listed in DoD 5010.12-L (AMSDL), orber listed in DoD 5010.12-L (AMSDL), or s data content and format requirements.s data content and format requirements.

ng in contract that generates requirement ng in contract that generates requirement t of Work paragraph number).t of Work paragraph number).

without conforming to Governmconforming to Governm administrative and other expenseadministrative and other expense delivering such data item to the Govdelivering such data item to th

c. Group III. Definition - DGroup III. Definitio develop for his internal use in velop for his internal us d ff d dd ff d d

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

Draftftftaftaftaftaftaftaftafta ttttttttttt

X014 A

MFFP

T-38C Avionics Component Integration

A034 Corrosion Prevention and Control Plan

DI-MFFP-81403 BLK 16 AFLCMC/WLDMA

N

D

BLK 16

BLK 16

BLK 16

BLK16

AFLCMC/WLDMA 1

6064 Dogwood Ave Bldg 1254 Hill AFB, UT 84056-5816 Attn: Edward Waghorn

0 0

Contractor format is acceptable using Microsoft Office Products.

BLK 5:

CLS PWS Paragraph:

HUD SOO Paragraph: 3.5.1

MDP SOO Paragraph: 3.5.1

ADS-B SOO Paragraph: 3.5.1

VHF SOO Paragraph: 3.5.1

Block 9: Distribution Statement D: Distribution authorized to Department of Defense (DoD) and U.S. DoD contractors for administrative or operational use, determined 12 September 2014. Other requests for a copy of this document shall be referred to AFLCMC/WLDMA.

Warning: This document contains technical data whose export is restricted by the Export Control Act (Title 22, V.S.C., Sec 2751 et seq.) or Executive Order 12470.

Violations of these export laws are subject to severe criminal penalties.

The above Distribution Statement and Warning Notice shall be displayed or affixed to the data in a conspicuous position.

Block's 10, 11, 12, and 13: The initial submission shall be provided within 30

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

X014 A MFFP

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

a em for further definition of data itemem for furth tion (DID) number, military specificationtion (DID) number, military specificat er listed in DoD 5010.12-L (AMSDL), orer listed in DoD 5010.12-L (AMSDL), data content and format requirements.data content and format requirement g in contract that generates requirement g in contract that generates req of Work paragraph number).of Work paragraph number).

sponsible for ensuring adequacy of thesponsible for ensuring adequacy of the

Estimated Price Costs toPrice those incurred over and above the er and above without conforming to Governming to Gov administrative and other expenseadministrative and other expense delivering such data item to the Govdelivering such data item to the Gov

c. Group III. Definition - Dc. Group III. Definition develop for his internal use in for his internal use

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

Draftftftaftaftaftaftaftaftafta ttttttttttt

X014 A

SESS

T-38C Avionics Component Integration

A035 Source Data for Forecasting DMSMS

DI-SESS-81656 BLK 16 AFLCMC/WLDMA

N

D

BLK 16

BLK 16

BLK 16

BLK16

AFLCMC/WLDMA 1

6064 Dogwood Ave Bldg 1254 Hill AFB, UT 84056-5816 Attn: Edward Waghorn

0 0

Contractor format is acceptable using Microsoft Office Products.

BLK 5:

CLS PWS Paragraph: 5.10.7

HUD SOO Paragraph: 9.1.1

MDP SOO Paragraph: 9.1.1

ADS-B SOO Paragraph: 9.1.1

VHF SOO Paragraph: 9.1.1

Block 9: Distribution Statement D: Distribution authorized to Department of Defense (DoD) and U.S. DoD contractors for administrative or operational use, determined 12 September 2014. Other requests for a copy of this document shall be referred to AFLCMC/WLDMA.

Warning: This document contains technical data whose export is restricted by the Export Control Act…