Questions_and_Answers_-_10_Jun_2014.pdf

10 Jun 2014

Questions and Answers

Question: Line item T. We need a height to give accurate cost.

Answer: this should be line item R and has no height, just the depth stated in the specifications and required digging including hand digging around utilities and buildings. Fence height for each project is in fence line items, line items T through Y.

Question: Line item U. Need height.

Answer: this should be line item S and has no height, just the depth stated in the specifications depth and required saw cutting of concrete.

Question: Line items AI. - BG. We need heights, all we have is widths.

Answer: these should be line items AG through AZ and have standard height of 7 feet tall.

Question: The primary solicitation Section II 2.11.12 VPL Gates references "300" CHAINLINK style. What is this?

Answer: I need to research this and get back to you.

. Line Item B.S. "3 Point Latching System" What is this?

Answer: this should be line item BG, and is a gate with 3 latches lower, middle, upper evenly spaced to help keep gate from being bent to gain access.

An alternate method for making gates more secure may be approved: please submit documentation for technical approval.

. Line item B.V. references "Drawing 1" can't locate drawing 1?

Answer: this should be line item BJ and drawing is attached. If not legible, this can be printed in the CE office and picked up by applicant.

. Seed Project calls to remove 7' of fence and 3' personnel gate, is it the intent to have the gap left from removing the gate in filled with fence?

Answer: Yes, there will be about 3.5' gap in fence line after removing gate and this needs to be filled in with a 7' tall fence. Then remove fence to create opening for new gate to be installed. Additional fence may need to be removed and replaced around the opening for the new gate location over the steam vault.