Solicitation Amendment - FA813426RB0010004.pdf

SOLICITATION, OFFER, AND AWARD 1. This Contract is a Rated Order under the Defense Priorities and Allocations System (DPAS) - Code of Federal Regulations - at 15 CFR 700

RATING PAGE 1 OF 288

2. CONTRACT NUMBER 3. SOLICITATION NUMBER

FA813426RB0010004

4. TYPE OF SOLICITATION

SEALED BID (IFB) INVITATION FOR BID

NEGOTIATED (RFP) REQUEST FOR PROPOSAL

5. DATE ISSUED

30 Oct 2025

6. REQUISITION/PURCHASE

NUMBER

7. ISSUED BY CODE FA8134

FA8134 AFLCMC WLK

CP 405 739 4177, 3001 STAFF DR BLDG 3001

TINKER AFB, OK 73145-3303

UNITED STATES

Connie Cole, Email: connie.cole.1@us.af.mil Telephone: 4053393513 CAMERON BURTON, Email: cameron.burton@us.af.mil Telephone: 312-884-6817

8. ADDRESS OFFER TO (If other than Item 7)

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

9. Sealed offers in original and copies for furnishings the supplies or services in the Schedule will be received at the place specified in item 8, or if 1 hand carried, in the depository located in until local time . CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision Number 12:00 PM 18 May 2026 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. FOR

INFORMATION

CALL

A. NAME

Connie Cole

B. TELEPHONE (NO COLLECT CALLS)

(405) 339-3513

C. EMAIL ADDRESS

connie.cole.1@us.af.mil

11. TABLE OF CONTENTS

SECTION DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

A SOLICITATION/CONTRACT FORM 1-2

B SUPPLIES OR SERVICES AND PRICES/COSTS 3-138

C DESCRIPTION/SPECIFICATIONS/WORK STATEMENT 139

D PACKAGING AND MARKING 140

E INSPECTION AND ACCEPTANCE 140-246

F DELIVERIES OR PERFORMANCE 247

G CONTRACT ADMINISTRATION DATA 248-250

H SPECIAL CONTRACT REQUIREMENTS 251

SECTION DESCRIPTION PAGE(S)

PART II - CONTRACT CLAUSES

I CONTRACT CLAUSES 252-275

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

J LIST OF ATTACHMENTS 276

PART IV - REPRESENTATIONS AND INSTRUCTIONS

K REPRESENTATIONS, CERTIFICATIONS AND OTHER

STATEMENTS OF OFFERORS

277-282

L INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

M EVALUATION FACTORS FOR AWARD 288

OFFER (Must be fully completed by offeror) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the set opposite each item, delivered period is inserted by the offeror) at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause Number 52.232-8)

20 CALENDAR DAYS (%) 30 CALENDAR DAYS (%) 10 CALENDAR DAYS (%)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

AMENDMENT NUMBER DATE AMENDMENT NUMBER DATE

15A. NAME

AND

ADDRESS

OF OFFEROR

CODE FACILITY 16. NAME AND THE TITLE OF PERSON AUTHORIZED TO SIGN

OFFER

(Type or print)

15B. TELEPHONE NUMBER

15C. CHECK IF REMITTANCE ADDRESS IS DIFFERENT FROM ABOVE -

ENTER SUCH ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL OPEN COMPETITION UNDER THE

UNITED STATES CODE AT:

10 U.S.C. 3204(a) 41 U.S.C. 3304(a) ()

23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified):

ITEM

24. ADMINISTERED BY (If other than Item 7) 25. PAYMENT WILL BE MADE BY CODE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

COMPUTER GENERATED STANDARD FORM 33 (REV. 12/2022)

Previous edition is NOT usable Prescribed by GSA-FAR (48 CFR) 53.214(c)

Created On:

05 Mar 2026, 10:19 AM Central Standard Time

Section A - Solicitation/Contract Form Executive Aircraft Engineering Support Services (ESS)

NAICS: 541330

Size Standard: USD 47,000,000.00 Annual receipts

Product Service Code: K016

FA813426RB0010004

Section B - Supplies or Services & Prices or Costs Additional Information/Notes

Item Supplies / Services Estimated Quantity Unit Unit Price Amount

VC-25A Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

E-4B Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

C-32A Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

C-40B AF Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

C-40C AFRC Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

C-40C ANG Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

VC-25B Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

NT-43A Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

C-32A 3rd Party Data Access

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Firm Fixed Price

1 Each

Additional Descriptive Data:

The Contractor shall provide electronic access to MyBoeingFleet.com services (MBF), per the MBF Agreement (Contract Attachment 2, Special to a 3rd party vendor that performs organizational level maintenance at Joint Base Andrews (JBA) in accordance with Terms and Conditions), ESS Performance Work Statement (PWS) paragraph 4.9.

C-40B AF 3rd Party Data Access

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Firm Fixed Price

1 Each

Additional Descriptive Data:

The Contractor shall provide electronic access to MyBoeingFleet.com services (MBF), per the MBF Agreement (Contract Attachment 2, Special to a 3rd party vendor that performs organizational level maintenance at Joint Base Andrews (JBA) in accordance with Terms and Conditions), ESS Performance Work Statement (PWS) paragraph 4.9.

VC-25A Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

E-4B Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

C-32A Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

C-40B AF Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

C-40C AFRC Travel

Product Service Code: K016

Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

C-40C ANG Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

VC-25B Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

NT-43A Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

VC-25A Engineering Project Material

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Procurement of material in support of Non-Recurring Engineering Projects, as specified in the Performance Work Statement and Appendix L, LOE/FP Matrix.

NOTE: Engineering Projects that include estimated material costs in excess of $2M shall be procured using the Engineering Assignment process established in the Performance Work Statement. The Government and the contractor can mutually agree to issue Engineering Projects (CR-NF) with estimated material costs in excess of $2M on a case-by-case basis.

E-4B Engineering Project Material

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Procurement of material in support of Non-Recurring Engineering Projects, as specified in the Performance Work Statement and Appendix L, LOE/FP Matrix.

NOTE: Engineering Projects that include estimated material costs in excess of $2M shall be procured using the Engineering Assignment process established in the Performance Work Statement. The Government and the contractor can mutually agree to issue Engineering Projects (CR-NF) with estimated material costs in excess of $2M on a case-by-case basis.

C-32A Engineering Project Material

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Procurement of material in support of Non-Recurring Engineering Projects, as specified in the Performance Work Statement and Appendix L, LOE/FP Matrix.

NOTE: Engineering Projects that include estimated material costs in excess of $2M shall be procured using the Engineering Assignment process established in the Performance Work Statement. The Government and the contractor can mutually agree to issue Engineering Projects (CR-NF) with estimated material costs in excess of $2M on a case-by-case basis.

C-40B AF Engineering Project Material

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Procurement of material in support of Non-Recurring Engineering Projects, as specified in the Performance Work Statement and Appendix L, LOE/FP Matrix.

NOTE: Engineering Projects that include estimated material costs in excess of $2M shall be procured using the Engineering Assignment process established in the Performance Work Statement. The Government and the contractor can mutually agree to issue Engineering Projects (CR-NF) with estimated material costs in excess of $2M on a case-by-case basis.

C-40C AFRC Engineering Project

Material

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Procurement of material in support of Non-Recurring Engineering Projects, as specified in the Performance Work Statement and Appendix L, LOE/FP Matrix.

NOTE: Engineering Projects that include estimated material costs in excess of $2M shall be procured using the Engineering Assignment process established in the Performance Work Statement. The Government and the contractor can mutually agree to issue Engineering Projects (CR-NF) with estimated material costs in excess of $2M on a case-by-case basis.

C-40C ANG Engineering Project Material

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Procurement of material in support of Non-Recurring Engineering Projects, as specified in the Performance Work Statement and Appendix L, LOE/FP Matrix.

NOTE: Engineering Projects that include estimated material costs in excess of $2M shall be procured using the Engineering Assignment process established in the Performance Work Statement. The Government and the contractor can mutually agree to issue Engineering Projects (CR-NF) with estimated material costs in excess of $2M on a case-by-case basis.

VC-25B Engineering Project Material

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Procurement of material in support of Non-Recurring Engineering Projects, as specified in the Performance Work Statement and Appendix L, LOE/FP Matrix.

NOTE: Engineering Projects that include estimated material costs in excess of $2M shall be procured using the Engineering Assignment process established in the Performance Work Statement. The Government and the contractor can mutually agree to issue Engineering Projects (CR-NF) with estimated material costs in excess of $2M on a case-by-case basis.

NT-43A Engineering Project Material

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Procurement of material in support of Non-Recurring Engineering Projects, as specified in the Performance Work Statement and Appendix L, LOE/FP Matrix.

NOTE: Engineering Projects that include estimated material costs in excess of $2M shall be procured using the Engineering Assignment process established in the Performance Work Statement. The Government and the contractor can mutually agree to issue Engineering Projects (CR-NF) with estimated material costs in excess of $2M on a case-by-case basis.

VC-25A Engineering Tasks (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost Plus Fixed Fee

317 Hours Estimated

Additional Descriptive Data:

Non-Recurring Engineering Tasks in accordance with ESS Performance Work State (PWS) paragraph 3.1 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Task shall be limited to ten (10) direct labor hours. The contractor shall comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

NOTE: No travel or material is authorized under Engineering Tasks.

E-4B Engineering Tasks (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost Plus Fixed Fee

260 Hours Estimated

Additional Descriptive Data:

Non-Recurring Engineering Tasks in accordance with ESS Performance Work State (PWS) paragraph 3.1 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Task shall be limited to ten (10) direct labor hours. The contractor shall comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

NOTE: No travel or material is authorized under Engineering Tasks.

C-32A Engineering Tasks (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost Plus Fixed Fee

228 Hours

Additional Descriptive Data:

Non-Recurring Engineering Tasks in accordance with ESS Performance Work State (PWS) paragraph 3.1 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Task shall be limited to ten (10) hours. direct labor The contractor shall comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

NOTE: No travel or material is authorized under Engineering Tasks.

C-40B AF Engineering Tasks (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost Plus Fixed Fee

106 Hours

Additional Descriptive Data:

Non-Recurring Engineering Tasks in accordance with ESS Performance Work State (PWS) paragraph 3.1 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Task shall be limited to ten (10) hours. direct labor The contractor shall comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

NOTE: No travel or material is authorized under Engineering Tasks.

C-40C AFRC Engineering Tasks (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost Plus Fixed Fee

105 Hours

Additional Descriptive Data:

Non-Recurring Engineering Tasks in accordance with ESS Performance Work State (PWS) paragraph 3.1 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Task shall be limited to ten (10) hours. direct labor The contractor shall comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

NOTE: No travel or material is authorized under Engineering Tasks.

C-40C ANG Engineering Tasks (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost Plus Fixed Fee

105 Hours

Additional Descriptive Data:

Non-Recurring Engineering Tasks in accordance with ESS Performance Work State (PWS) paragraph 3.1 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Task shall be limited to ten (10) hours. direct labor The contractor shall comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

NOTE: No travel or material is authorized under Engineering Tasks.

VC-25B Engineering Tasks (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost Plus Fixed Fee

337 Hours

Additional Descriptive Data:

Non-Recurring Engineering Tasks in accordance with ESS Performance Work State (PWS) paragraph 3.1 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Task shall be limited to ten (10) hours. direct labor The contractor shall comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

NOTE: No travel or material is authorized under Engineering Tasks.

NT-43A Engineering Tasks (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost Plus Fixed Fee

10 Hours

Additional Descriptive Data:

Non-Recurring Engineering Tasks in accordance with ESS Performance Work State (PWS) paragraph 3.1 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Task shall be limited to ten (10) hours. direct labor The contractor shall comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

NOTE: No travel or material is authorized under Engineering Tasks.

VC-25A Engineering Projects (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost Plus Fixed Fee

11,963 Hours

Additional Descriptive Data:

Non-Recurring Engineering Projects in accordance with ESS Performance Work State (PWS) paragraph 3.2 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Project shall be limited to 3,500 hours. The contractor shall direct labor comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

E-4B Engineering Projects (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost Plus Fixed Fee

34,145 Hours

Additional Descriptive Data:

Non-Recurring Engineering Projects in accordance with ESS Performance Work State (PWS) paragraph 3.2 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Project shall be limited to 3,500 hours. The contractor shall direct labor comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

C-32A Engineering Projects (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost Plus Fixed Fee

17,818 Hours

Additional Descriptive Data:

Non-Recurring Engineering Projects in accordance with ESS Performance Work State (PWS) paragraph 3.2 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Project shall be limited to 3,500 hours. The contractor shall direct labor comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

C-40B AF Engineering Projects (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost Plus Fixed Fee

9,857 Hours

Additional Descriptive Data:

Non-Recurring Engineering Projects in accordance with ESS Performance Work State (PWS) paragraph 3.2 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Project shall be limited to 3,500 hours. The contractor shall direct labor comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

C-40C AFRC Engineering Projects (Level of Effort)

Product Service Code: K016

Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost Plus Award Fee

9,857 Hours

Additional Descriptive Data:

Non-Recurring Engineering Projects in accordance with ESS Performance Work State (PWS) paragraph 3.2 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Project shall be limited to 3,500 hours. The contractor shall direct labor comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

C-40C ANG Engineering Projects (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost Plus Fixed Fee

9,857 Hours

Additional Descriptive Data:

Non-Recurring Engineering Projects in accordance with ESS Performance Work State (PWS) paragraph 3.2 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Project shall be limited to 3,500 direct labor hours. The contractor shall comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

VC-25B Engineering Projects (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost Plus Fixed Fee

11,962 Hours

Additional Descriptive Data:

Non-Recurring Engineering Projects in accordance with ESS Performance Work State (PWS) paragraph 3.2 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Project shall be limited to 3,500 hours. The contractor shall direct labor comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

NT-43A Engineering Projects (Level of Effort)

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost Plus Fixed Fee

10 Hours

Additional Descriptive Data:

Non-Recurring Engineering Projects in accordance with ESS Performance Work State (PWS) paragraph 3.2 and Appendix M, Cost Plus Fixed Fee Level of Effort (CPFF LOE) Term Instructions. Each Engineering Project shall be limited to 3,500 hours. The contractor shall direct labor comply with special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort.

Proposal Preparation - LOW

Product Service Code: K016 Pricing Arrangement: Firm Fixed Price

5 Each

Additional Descriptive Data:

Proposal preparation in accordance with Performance Work Statement (PWS) paragraph 3.6 and Appendix L. Engineering Assignments with an estimated value less than $2M and/or minimal single-tiered suppliers are assigned to the 'Low' Proposal Preparation category. The standard proposal submission timeline for 'Low' Proposal Preparation is 60 calendar days. Incentives for early and late submission are detailed in

Appendix L of the PWS. Proposal complexity will be jointly determined through discussions with the contractor at the Boeing Advanced Communication Initiative (BACIn) meeting. The USAF Contracting Officer shall be the approval authority for determination of proposal complexity.

Proposal Preparation - MEDIUM

Product Service Code: K016 Pricing Arrangement: Firm Fixed Price

5 Each

Additional Descriptive Data:

Proposal preparation in accordance with Performance Work Statement (PWS) paragraph 3.6 and Appendix L. Engineering Assignments with an estimated value equal to $2M and less than $500M and/or multiple single-tiered suppliers are assigned to the 'Medium' Proposal Preparation category. The standard proposal submission timeline for 'Medium' Proposal Preparation is 150 calendar days. Incentives for early and late submission are detailed in Appendix L of the PWS. Proposal complexity will be jointly determined through discussions with the contractor at the Boeing Advanced Communication Initiative (BACIn) meeting. The USAF Contracting Officer shall be the approval authority for determination of proposal complexity.

Proposal Preparation - HIGH

Product Service Code: K016 Pricing Arrangement: Firm Fixed Price

5 Each

Additional Descriptive Data:

Proposal preparation in accordance with Performance Work Statement (PWS) paragraph 3.6 and Appendix L. Engineering Assignments with an estimated value equal to or greater than $500M and/or multi-tiered suppliers are assigned to the 'High' Proposal Preparation category. The standard proposal submission timeline for 'High' Proposal Preparation is 210 calendar days. Incentives for early and late submission are detailed below and in Appendix L of the PWS. Proposal complexity will be jointly determined through discussions with the contractor at the Boeing Advanced Communication Initiative (BACIn) meeting. The USAF Contracting Officer shall be the approval authority for determination of proposal complexity.

Engineering Assignments (CPFF)

Product Service Code: K016 Pricing Arrangement: Cost Plus Fixed Fee

4 Lot To Be Negotiated

Additional Descriptive Data:

Non-Recurring Engineering Assignments (requires more than 3,500 direct labor hours) in accordance with Performance Work Statement paragraph 3.3 and the applicable Letter Request for Proposal (LRFP).

Engineering Assignments (CPIF)

Product Service Code: K016 Pricing Arrangement: Cost Plus Incentive Fee

4 Lot To Be Negotiated

Additional Descriptive Data:

Non-Recurring Engineering Assignments (requires more than 3,500 direct labor hours) in accordance with Performance Work Statement paragraph 3.3 and the applicable Letter Request for Proposal (LRFP).

Engineering Assignments (FPIF)

Product Service Code: K016 Pricing Arrangement: Fixed Price Incentive - Firm Target

1 Lot To Be Negotiated

Additional Descriptive Data:

Non-Recurring Engineering Assignments (requires more than 3,500 direct labor hours) in accordance with Performance Work Statement paragraph 3.3 and the applicable Letter Request for Proposal (LRFP).

Engineering Assignments (FFP)

Product Service Code: K016 Pricing Arrangement: Firm Fixed Price

1 Lot To Be Negotiated

Additional Descriptive Data:

Non-Recurring Engineering Assignments (requires more than 3,500 direct labor hours) in accordance with Performance Work Statement paragraph 3.3 and the applicable Letter Request for Proposal (LRFP).

Engineering Assignments (CPFF LOE)

Product Service Code: K016 Pricing Arrangement: Cost Plus Fixed Fee

1 Lot To Be Negotiated

Additional Descriptive Data:

Non-Recurring Engineering Assignments (requires more than 3,500 direct labor hours) in accordance with Performance Work Statement paragraph 3.3 and the applicable Letter Request for Proposal (LRFP). Special clause FA8134.52.216-9Z01, Cost Plus Fixed-Fee--Level of Effort shall apply to CPFF LOE Engineering Assignments.

NOTE: The Executive Aircraft Division Chief Engineer serves as the approval authority for using CLIN X805, CPFF LOE Engineering Assignments.

Contract Data Requirements Lists

Technical data deliverables shall be marked in accordance with DFARS 252.227-7013(f)(3).

Product Service Code: K016 Pricing Arrangement: Cost No Fee

1 Lot Not Separately Priced

Additional Descriptive Data:

CDRLs

XX01 Systems Engineering Management Plan

XX02 System Safety Hazard Analysis Report (SSHAR)

XX03 Data Accession List

XX04 /Service Bulletins/Advisory Data Airworthiness Directives

XX05 Technical Report

XX06 Report (SER) Service Engineering

XX07 Meeting Agenda

XX08 Meeting Minutes

XX09 Training Materials

XX10 Telephone Directory

XX11 Contractor's Risk Management Plan

XX12 Reliability and Maintainability (R&M) Program Plan

XX13 Government Industry Data Exchange Program (GIDEP) Alert/Safe-Alert Response

XX14 Contract Funds Status Report (CFSR)

XX15 Reserved

XX16 Management Plan

XX17 Status of Government Furnished Equipment (GFE) Report

XX18 System Safety Program Plan (SSPP)

XX19 Hazardous Materials Management Program (HMMP) Plan

XX20 Supplier's Configuration Management Plan

XX21 Program Protection Implementation Plan (PPIP)

XX22 Engineering Services Memorandum (ESM)

XX23 Project Planning Chart

XX24 System/Subsystem Specification

XX25 Test Procedures

XX26 Test/Inspection Report

XX27 Initial Spares Recommendation

XX28 Technical Report

XX29 Safety Assessment Report

XX30 Integrated Logistics Support Plan

XX31 COTS Manuals and Associated Supplemental Data

XX32 Requirements Breakdown Matrix

XX33 CDA Airworthiness Certification

XX34 Interface Control Document (ICD)

XX35 Integrated Support Plan

XX36 Training Program Structure Document

XX37 Technical Manual Contract Requirements (TMCR)

XX38 Service Bulletins

XX39 Spectrum Certification

XX40 Status Report

XX41 Time Compliance Order (TCTO) Status Report

XX42 Additional Data for Technical Publication

XX43 COTS Cyber Analysis

XX44 Meeting Agenda

XX45 Meeting Minutes

XX46 Presentation Material

XX47 Software Test Description

XX48 Software Test Report

XX49 Integrated Program Management Data and Analysis Report (IPMDAR)

XX50 Contract Work Breakdown Structure

XX51 Technical Report

XX52 Technical Report

Exhibit Nomenclature

Alpha Character 1 Alpha Character 2

A - Base Period A - ESS Umbrella IDIQ

B - Option 1 B - VC-25A

C - Option 2 C - E-4B

D - Option 3 D - C-32A

E - Option 4 E - C-40B/C

F - Option 5 F - VC-25B

G - Option 6 G - NT-43A

H - Option 7

J - Option 8

K - Option 9

Option Line Item

Option Period 1 VC-25A Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

Option Line Item

Option Period 1 E-4B Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

Option Line Item

Option Period 1 C-32A Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

Option Line Item

Option Period 1 C-40B AF Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

Option Line Item

Option Period 1 C-40C AFRC Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

Option Line Item

Option Period 1 C-40C ANG Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

Option Line Item

Option Period 1 VC-25B Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

Option Line Item

Option Period 1 NT-43A Recurring Engineering

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Fixed Price Incentive - Firm Target

12 Months

Additional Descriptive Data:

Recurring Engineering Services in accordance with ESS Performance Work Statement (PWS) Section 2.0 and Appendix L, LOE/FP Matrix.

Option Line Item

C-32A 3rd Party Data Access

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Firm Fixed Price

1 Each

Additional Descriptive Data:

The Contractor shall provide electronic access to MyBoeingFleet.com services (MBF), per the MBF Agreement (Contract Attachment 2, Special to a 3rd party vendor that performs organizational level maintenance at Joint Base Andrews (JBA) in accordance with Terms and Conditions), ESS Performance Work Statement (PWS) paragraph 4.9.

Option Line Item

C-40B AF 3rd Party Data Access

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Firm Fixed Price

1 Each

Additional Descriptive Data:

The Contractor shall provide electronic access to MyBoeingFleet.com services (MBF), per the MBF Agreement (Contract Attachment 2, Special to a 3rd party vendor that performs organizational level maintenance at Joint Base Andrews (JBA) in accordance with Terms and Conditions), ESS Performance Work Statement (PWS) paragraph 4.9.

Option Line Item

VC-25A Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

Option Line Item

E-4B Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

Option Line Item

C-32A Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

C-40B AF Travel

Option Line Item

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

Lot

Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

Option Line Item

C-40C AFRC Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

Option Line Item

C-40C ANG Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

Option Line Item

VC-25B Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

NT-43A Travel

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Travel in support of Non-Recurring Engineering Projects and Engineering Assignments.

NOTE: Approval from the PCO is required before travel is accomplished. The contractor shall submit all travel requests at least 3 days prior to the travel start date. All contractor travel shall be in accordance with Federal Joint Travel Regulations (JTR), located at https://www.travel.dod.mil/ Policy-Regulations/Joint-Travel-Regulations/.

Option Line Item

Option Period 1 VC-25A Engineering Project Material

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Procurement of material in support of Non-Recurring Engineering Projects, as specified in the Performance Work Statement and Appendix L, LOE/FP Matrix.

NOTE: Engineering Projects that include estimated material costs in excess of $2M shall be procured using the Engineering Assignment process established in the Performance Work Statement. The Government and the contractor can mutually agree to issue Engineering Projects (CR-NF) with estimated material costs in excess of $2M on a case-by-case basis.

Option Line Item

Option Period 1 E-4B Engineering Project Material

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DX-A1 Surveillance Criticality Designator: A Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Procurement of material in support of Non-Recurring Engineering Projects, as specified in the Performance Work Statement and Appendix L, LOE/FP Matrix.

NOTE: Engineering Projects that include estimated material costs in excess of $2M shall be procured using the Engineering Assignment process established in the Performance Work Statement. The Government and the contractor can mutually agree to issue Engineering Projects (CR-NF) with estimated material costs in excess of $2M on a case-by-case basis.

Option Line Item

Option Period 1 C-32A Engineering Project Material

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Procurement of material in support of Non-Recurring Engineering Projects, as specified in the Performance Work Statement and Appendix L, LOE/FP Matrix.

NOTE: Engineering Projects that include estimated material costs in excess of $2M shall be procured using the Engineering Assignment process established in the Performance Work Statement. The Government and the contractor can mutually agree to issue Engineering Projects (CR-NF) with estimated material costs in excess of $2M on a case-by-case basis.

Option Period 1 C-40B AF Engineering Project

Material

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Procurement of material in support of Non-Recurring Engineering Projects, as specified in the Performance Work Statement and Appendix L, LOE/FP Matrix.

NOTE: Engineering Projects that include estimated material costs in excess of $2M shall be procured using the Engineering Assignment process established in the Performance Work Statement. The Government and the contractor can mutually agree to issue Engineering Projects (CR-NF) with estimated material costs in excess of $2M on a case-by-case basis.

Option Line Item

Option Period 1 C-40C AFRC Engineering Project Material

Product Service Code: K016 Defense Priorities Allocation System (DPAS) Priority Rating: DO-A1 Surveillance Criticality Designator: C Pricing Arrangement: Cost No Fee

1 Lot Estimated

Additional Descriptive Data:

Procurement of material in…