Attachment 1 - Item Description - Overhead Door (Modified COTS).pdf
PDF 139 KB Posted
- Attached to
- Overhead Door (Modified COTS)
- Solicitation number
- FA813226Q0051
About this file
This is a Memorandum for Record documenting item specifications for a federal procurement by the Department of the Air Force, Headquarters Air Force Sustainment Center at Tinker Air Force Base.
The 76th PMXG is requesting funds to purchase one modified Commercial Off-The-Shelf (COTS) motor-operated rolling overhead door for delivery only with no installation required. The door opening dimensions are 24 feet by 23 feet 8 inches with left-hand drive configuration. Technical specifications include a 3 horsepower, 460-volt, three-phase opener; 20-gauge steel curtain with gray primed paint; variable frequency wind lock end locks; double angle steel bottom bar with black powder coat finish; 24-gauge steel round hood with gray primed paint; steel guides and bracket with 5/16-inch steel and heavy-duty bearings with black powder coat; 1¾-inch drive shaft with 50,000-cycle springs and heavy-duty bearings; relay accessory module; and 20 PSF design pressure rating. The door must serve as a direct replacement that integrates with existing facility infrastructure and provides exact form, fit, and function without requiring structural modifications to the specialized maintenance facility.
Attendance at a Government-hosted mandatory Industry Day/Site Visit is a prerequisite for submitting a proposal. Vendors must physically measure the existing opening and assess all surrounding facility constraints to verify compliance with the form, fit, and function requirements without necessitating structural modifications.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)
TINKER AIR FORCE BASE OKLAHOMA
23 July 2026
MEMORANDUM FOR RECORD
SUBJECT: Item Description, P26-170 Overhead Door (Modified COTS)
1. The 76th PMXG is requesting utilization of funds for the purchase of a Modified Commercial
Off-The-Shelf (COTS) motor-operated rolling overhead door.
2. The requested equipment item descriptions/specifications are outlined below.
a. The requested equipment is a direct replacement that must integrate with the existing facility infrastructure. The replacement rollup door must provide the exact form, fit, and function of the original component to ensure the specialized maintenance facility can be returned to its designed operational capacity.
b. Modified COTS motor-operated rolling overhead door
(1) Delivery Only, No Installation Required
(2) Quantity: One (1)
(3) Technical Specifications:
(a) Motor Operated Rolling Door
(b) Door Opening 24' x 23'- 8"
(c) Left hand Drive
(d) Accessory module – Relay
(e) 3 HP/460 Volt 3Phase Opener
(f) Curtain: 20 GA Steel
(g) Paint: Gray, Primed
(h) End Locks: Variable Frequency Wind Lock
(i) Bottom Bar: Double Angle, Steel, Powder Coat-Black
(j) Round Hood: 24 GA. Steel, Gray, Primed
(k) Guides: Steel, Powder Coat-Black
(l) Bracket: 5/16" Steel, Heavy Duty Bearings, Powder Coat Black
(m) Pipe 1 3/4" Drive Shaft, 50,000 Cycles Springs, heavy duty bearings
(n) Design Pressure: 20 PSF
3. Mandatory Industry Day/Site Visit
a. Attendance at the Government-hosted Industry Day/Site Visit is a mandatory prerequisite for submitting a proposal on this requirement.
b. Vendors must physically measure the existing opening and assess all surrounding facility constraints to ensure any proposed solution can comply with the "form, fit, and function" requirements outlined in Paragraph 2a without requiring structural modifications.
File details come from the government source that posted it. Updated .