Solicitation Amendment 2_ (Changes Only).pdf

R

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Solicitation/Contract Form

The following changes have been made:

INFORMATION FROM TO

Number of Sealed Copies 5 3

Supplies or Services & Prices or Costs

The following CLIN(s) / SLIN(s) were added:

Item Supplies / Services Quantity Unit Unit Price Amount

Option Line Item

On the Job Training: Option IV. Services, non-personal. The Contractor shall perform On-the-Job (OJT) training at the request of the COR. OJT will consist of the Government employee(s)/trainee working with a Contractor, who has been designated as trainer, on a day-to-day basis to obtain task knowledge and experience. OJT may be conducted in the trainee's work area or at the GFF IAW paragraph 1.2.15, at the determination of the COR.. The Contractor /task trainer tracks or monitors the work of the Government employee until the individual is proficient enough to work alone. OJT will consist of three components

(1) Job Knowledge - obtained by studying technical references identified by the trainer, (2) Job Proficiency - hands-on training provided on the job allowing the trainees' to gain proficiency of tasks performed in the work center and, (3) Job experience, gained during the period of OJT to build confidence and competence.

The contractor will provide written documentation of the employee's OJT training to the trainee and COR at the completion of the requested period of training. The written report will also contain hours worked by contractor performing the OJT. Each session of On-the-Job training will be 8 hours in length.

The request for OJT support will coincide with the submission of the approved class schedule IAW PWS 1.2.1, In the event additional OJT support is required outside of the approved class schedule, the COR will request the additional support.

Purchase Requisition Line Item Number:

Product Service Code: U099 Product Type Code: U099 Firm Fixed Price

90 Sessions

The following CLIN(s) / SLIN(s) were modified:

FA813222R00020002

INFORMATION FROM TO

Description

On the Job Training: Services, non-personal. The contractor shall perform On-the-Job (OJT) training at the request of the COR. OJT will consist of the government employee(s)/trainee working with a contractor, who has been designated as trainer, on a day-to-day basis to obtain task knowledge and experience. The contractor/task trainer tracks or monitors the work of the government employee until the individual is proficient enough to work alone. OJT will consist of three components (1) Job Knowledge -obtained by studying technical references identified by the trainer, (2) Job Proficiency -hands-on training provided on the job allowing the trainee(s) to gain proficiency of tasks performed in the work center and, (3) Job experience, gained during the period of OJT to build confidence and competence. The contractor shall meet with the supervisor of the government employee(s) and the COR quarterly and provide a written report of each trainees' progress. The written report will also contain hours worked by contractor performing the OJT. OJT shall also include instructor attending AF Principles of Instruction Course (80 hours) which is required for all AF instructors.

On the Job Training: Services, non-personal. : The Contractor shall perform On-the-Job (OJT) training at the request of the COR. OJT will consist of the Government employee(s)/trainee working with a Contractor, who has been designated as trainer, on a day-to-day basis to obtain task knowledge and experience.

OJT may be conducted in the trainee's work area or at the GFF IAW paragraph 1.2.15, at the determination of the COR.. The Contractor/task trainer tracks or monitors the work of the Government employee until the individual is proficient enough to work alone. OJT will consist of three components (1) Job Knowledge - obtained by studying technical references identified by the trainer, (2) Job Proficiency - hands-on training provided on the job allowing the trainees' to gain proficiency of tasks performed in the work center and, (3) Job experience, gained during the period of OJT to build confidence and competence. The contractor will provide written documentation of the employee's OJT training to the trainee and COR at the completion of the requested period of training. The written report will also contain hours worked by contractor performing the OJT. Each session of On-the-Job training will be 8 hours in length. The request for OJT support will coincide with the submission of the approved class schedule IAW PWS 1.2.1, In the event additional OJT support is required outside of the approved class schedule, the COR will request the additional support.

Quantity 12 90 Unit of Measure Months Sessions

Option Line Item 1004

INFORMATION FROM TO

Description

On the Job Training: Option I. Services; non-personal. The contractor shall perform On-the- Job (OJT) training at the request of the COR.

OJT will consist of the government employee(s) /trainee working with a contractor, who has been designated as trainer, on a day-to-day basis to obtain task knowledge and experience. The contractor/task trainer tracks or monitors the work of the government employee until the individual is proficient enough to work alone.

OJT will consist of three components (1) Job Knowledge - obtained by studying technical references identified by the trainer, (2) Job Proficiency - hands-on training provided on the job allowing the trainee(s) to gain proficiency of tasks performed in the work center and, (3) Job experience, gained during the period of OJT to build confidence and competence. The contractor shall meet with the supervisor of the government employee(s) and the COR quarterly and provide a written report of each trainees' progress. The written report will also contain hours worked by contractor performing the OJT. OJT shall also include instructor attending AF Principles of Instruction Course (80 hours) which is required for all AF instructors.

On the Job Training: Option I. Services; non-personal. On the Job Training: Services, non-personal. : The Contractor shall perform On-the-Job (OJT) training at the request of the COR. OJT will consist of the Government employee(s)/trainee working with a Contractor, who has been designated as trainer, on a day-to-day basis to obtain task knowledge and experience. OJT may be conducted in the trainee's work area or at the GFF IAW paragraph 1.2.15, at the determination of the COR.. The Contractor/task trainer tracks or monitors the work of the Government employee until the individual is proficient enough to work alone. OJT will consist of three components (1) Job Knowledge - obtained by studying technical references identified by the trainer, (2) Job Proficiency - hands-on training provided on the job allowing the trainees' to gain proficiency of tasks performed in the work center and, (3) Job experience, gained during the period of OJT to build confidence and competence.

The contractor will provide written documentation of the employee's OJT training to the trainee and COR at the completion of the requested period of training. The written report will also contain hours worked by contractor performing the OJT.

Each session of On-the-Job training will be 8 hours in length. The request for OJT support will coincide with the submission of the approved class schedule IAW PWS 1.2.1, In the event additional OJT support is required outside of the approved class schedule, the COR will request the additional support.

Quantity 12 90 Unit of Measure Months Sessions

Option Line Item 2004

INFORMATION FROM TO

On the Job Training: Option II. Services, non-personal. The contractor shall perform On-the-Job (OJT) training at the request of the COR. OJT will consist of the government employee(s)/trainee working with a contractor, who has been

On the Job Training: Option II. Services, non-personal. The Contractor shall perform On-the-Job (OJT) training at the request of the COR. OJT will consist of the Government employee(s)/trainee working with a Contractor, who has been designated as trainer, on a day-to-day basis to obtain task

Description designated as trainer, on a day-to-day basis to obtain task knowledge and experience. The contractor/task trainer tracks or monitors the work of the government employee until the individual is proficient enough to work alone. OJT will consist of three components (1) Job Knowledge -obtained by studying technical references identified by the trainer, (2) Job Proficiency -hands-on training provided on the job allowing the trainee(s) to gain proficiency of tasks performed in the work center and, (3) Job experience, gained during the period of OJT to build confidence and competence. The contractor shall meet with the supervisor of the government employee(s) and the COR quarterly and provide a written report of each trainees' progress. The written report will also contain hours worked by contractor performing the OJT. OJT shall also include instructor attending AF Principles of Instruction Course (80 hours) which is required for all AF instructors.

knowledge and experience. OJT may be conducted in the trainee's work area or at the GFF IAW paragraph 1.2.15, at the determination of the COR.. The Contractor/task trainer tracks or monitors the work of the Government employee until the individual is proficient enough to work alone. OJT will consist of three components (1) Job Knowledge - obtained by studying technical references identified by the trainer, (2) Job Proficiency

- hands-on training provided on the job allowing the trainees' to gain proficiency of tasks performed in the work center and, (3) Job experience, gained during the period of OJT to build confidence and competence. The contractor will provide written documentation of the employee's OJT training to the trainee and COR at the completion of the requested period of training. The written report will also contain hours worked by contractor performing the OJT. Each session of On-the-Job training will be 8 hours in length. The request for OJT support will coincide with the submission of the approved class schedule IAW PWS 1.2.1, In the event additional OJT support is required outside of the approved class schedule, the COR will request the additional support.

Quantity 12 90 Unit of Measure Months Sessions

Option Line Item 3004

INFORMATION FROM TO

Description

On the Job Training: Option III. Services, non-personal. The contractor shall perform On-the-Job (OJT) training at the request of the COR. OJT will consist of the government employee(s)/trainee working with a contractor, who has been designated as trainer, on a day-to-day basis to obtain task knowledge and experience. The contractor/task trainer tracks or monitors the work of the government employee until the individual is proficient enough to work alone. OJT will consist of three components (1) Job Knowledge -obtained by studying technical references identified by the trainer, (2) Job Proficiency -hands-on training provided on the job allowing the trainee(s) to gain proficiency of tasks performed in the work center and, (3) Job experience, gained during the period of OJT to build confidence and competence. The contractor shall meet with the supervisor of the government employee(s) and the COR quarterly and provide a written report of each trainees' progress. The written report will also contain hours worked by contractor performing the OJT. OJT shall also include instructor attending AF Principles of Instruction Course (80 hours) which is required for all AF instructors.

On the Job Training: Option III. Services, non-personal. The Contractor shall perform On-the-Job (OJT) training at the request of the COR. OJT will consist of the Government employee(s)/trainee working with a Contractor, who has been designated as trainer, on a day-to-day basis to obtain task knowledge and experience. OJT may be conducted in the trainee's work area or at the GFF IAW paragraph 1.2.15, at the determination of the COR.. The Contractor/task trainer tracks or monitors the work of the Government employee until the individual is proficient enough to work alone. OJT will consist of three components (1) Job Knowledge - obtained by studying technical references identified by the trainer, (2) Job Proficiency

- hands-on training provided on the job allowing the trainees' to gain proficiency of tasks performed in the work center and, (3) Job experience, gained during the period of OJT to build confidence and competence. The contractor will provide written documentation of the employee's OJT training to the trainee and COR at the completion of the requested period of training. The written report will also contain hours worked by contractor performing the OJT. Each session of On-the-Job training will be 8 hours in length. The request for OJT support will coincide with the submission of the approved class schedule IAW PWS 1.2.1, In the event additional OJT support is required outside of the approved class schedule, the COR will request the additional support.

Quantity 12 90 Unit of Measure Months Sessions

Inspection and Acceptance

The inspection and acceptance locations for the following CLIN(s) / SLIN(s) were added:

Option Line Item 4004 Inspection and Acceptance Location - F3YCEB - OC ALC OBC

INFORMATION VALUE

Action Both Location Destination

F3YCEB

Acceptance Location

OC ALC OBC

3001 STAFF DR DOOR G70 POST N68

AF BPN NO MILSBILLS PROCESSES

TINKER AFB, OK 73145-3303

UNITED STATES

Instructions Please notify POC prior to shipment POC Name Jordan Quiroga POC Telephone (405) 734-2845

Deliveries or Performance

The delivery information for the following CLIN(s) / SLIN(s) were added:

Option Line Item 4004

INFORMATION VALUE

Period of Performance 01 Oct 2026 to 30 Sep 2027

Place of Performance - F3YCEB - OC ALC OBC

INFORMATION VALUE

Address

Place of Performance

F3YCEB

OC ALC OBC

3001 STAFF DR DOOR G70 POST N68

AF BPN NO MILSBILLS PROCESSES

TINKER AFB, OK 73145-3303

UNITED STATES

POC Name Jordan Quiroga POC Telephone 405-734-2845 Delivery Delivery Period PeriodStart = 01 Oct 2026. PeriodEnd = 30 Sep 2027.

Contract Clauses

Miscellaneous text in this section has been modified to:

52.217-5 Evaluation of Options.

As prescribed in 17.208(c), insert a provision substantially the same as the following:

Evaluation of Options (July 1990)

Except when it is determined in accordance with FAR 17.206(b) not to be in the Government's best interests, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. Evaluation of options will not obligate the Government to exercise the option(s).

(End of provision)

52.243-1 Changes-Fixed-Price.

As prescribed in 43.205(a)(1), insert the following clause. The 30-day period may be varied according to agency procedures.

Changes-Fixed Price (Aug 1987)

(a) The Contracting Officer may at any time, by written order, and without notice to the sureties, if any, make changes within the general scope of this contract in any one or more of the following:

(1) Drawings, designs, or specifications when the supplies to be furnished are to be specially manufactured for the Government in accordance with the drawings, designs, or specifications.

(2) Method of shipment or packing.

(3) Place of delivery.

(b) If any such change causes an increase or decrease in the cost of, or the time required for, performance of any part of the work under this contract, whether or not changed by the order, the Contracting Officer shall make an equitable adjustment in the contract price, the delivery schedule, or both, and shall modify the contract.

(c) The Contractor must assert its right to an adjustment under this clause within 30 days from the date of receipt of the written order. However, if the Contracting Officer decides that the facts justify it, the Contracting Officer may receive and act upon a proposal submitted before final payment of the contract.

(d) If the Contractor's proposal includes the cost of property made obsolete or excess by the change, the Contracting Officer shall have the right to prescribe the manner of the disposition of the property.

(e) Failure to agree to any adjustment shall be a dispute under the Disputes clause. However, nothing in this clause shall excuse the Contractor from proceeding with the contract as changed.

Alternate III (Apr1984). If the requirement is for architect-engineer or other professional services, substitute the following paragraph (a) for paragraph (a) of the basic clause and add the following paragraph (f):

(a) The Contracting Officer may at any time, by written order, and without notice to the sureties, if any, make changes within the general scope of this contract in the services to be performed.

(f) No services for which an additional cost or fee will be charged by the Contractor shall be furnished without the prior written authorization of the Contracting Officer.

(End of clause)

252.223-7999 Ensuring Adequate COVID-19 Safety Protocols for Federal

Contractors (Deviation 2021-O0009) As prescribed in Class Deviation 2021-O0009, Ensuring Adequate COVID-19 Safety Protocols for Federal Contractors, use the following clause:

ENSURING ADEQUATE COVID-19 SAFETY PROTOCOLS FOR FEDERAL

CONTRACTORS (DEVIATION 2021-O0009) (OCT 2021)

(a) Definition. As used in this clause - United States or its outlying areas means--

(1) The fifty States;

(2) The District of Columbia;

(3) The commonwealths of Puerto Rico and the Northern Mariana Islands;

(4) The territories of American Samoa, Guam, and the United States Virgin Islands; and

(5) The minor outlying islands of Baker Island, Howland Island, Jarvis Island, Johnston Atoll, Kingman Reef, Midway Islands, Navassa Island, Palmyra Atoll, and Wake Atoll.

(b) Authority. This clause implements Executive Order 14042, Ensuring Adequate COVID Safety Protocols for Federal Contractors, dated September 9, 2021 (published in the Federal Register on September 14, 2021, 86 FR 50985).

(c) Compliance. The Contractor shall comply with all guidance, including guidance conveyed through Frequently Asked Questions, as amended during the performance of this contract, for contractor or subcontractor workplace locations published by the Safer Federal Workforce Task Force (Task Force Guidance) at https:/www.saferfederalworkforce.gov/contractors/.

(d) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (d), in subcontracts at any tier that exceed the simplified acquisition threshold, as defined in Federal Acquisition Regulation 2.101 on the date of subcontract award, and are for services, including construction, performed in whole or in part within the United States or its outlying areas.

(End of clause)

SITE VISIT

A site visit will be held on 3 Dec 2021 at Bldg. 1 Tinker AFB, OK, so that interested contractors may inspect the site where the work is to be performed in order to satisfy themselves concerning all general and local conditions which could affect cost of contract performance to the extent such information is available. Interested contractors are required to notify Tim Gaines, Contract Specialist, ONLY by email at paul.gaines.1@us.af.mil if they plan to attend. Failure to notify Mr. Tim Gaines by 30 Nov 2021 could result in non-availability of transportation and contractor inability to attend the site visit. All interested contractors are strongly urged to attend.

CONTRACT HOLIDAYS

(a) The prices/costs in Section B of the contract do not include rates for holiday observances unless otherwise stated; accordingly, the Government will not be billed for such holidays unless services are required by the Government and are actually performed on a holiday. Holidays in addition to those reflected in this contract, which are designated by the Government, will be billable provided the assigned Contractor employee was available for performance and was precluded from such performance.

(b) The following days are contract holidays: New Year's Day, Martin Luther King, Jr. Day, President's Day, Memorial Day, Juneteenth, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day (to include the three days afterward), and Christmas Day.

CONTRACTOR ID BADGE REQUIREMENTS

Contractors working on Tinker AFB shall comply with all procedures outlined in TAFBI 31-101, AFI 10-245 and TAFBP 31-101. OF SPECIAL NOTE, in accordance with TAFBI 31-101 para 3.3 - 3.5, an AFMC Form 387 or DBIDS Identification Credential should only be issued to individuals who require frequent access to the installation. The term "Frequent Access" is defined as a requirement to enter the installation at least once per week. An Identification Credential will not be issued for less than 60 days of use. In this instance, a temporary pass will be issued. A typed AFMC Form 496, Application for AFMC Identification Card, will be required for each Identification Credential issued. All individuals will be assessed a charge of $50.00 for each Identification Credential lost, willfully damaged, or not surrendered to Pass and Identification. (This also includes badges that have expired). No charge will be made on a replacement required due to normal wear. Personnel will report to Accounting and Finance, Accounts Receivable Unit and a DD Form 1131, Cash Collection Voucher, will be prepared and hand carried to Pass and Identification prior to issuing replacement identification. Identification cards will be surrendered to Security Forces personnel upon demand for the purpose of identification, investigation, abuse, misuse, or for any other reason necessary. If the identification badge Identification Credential is confiscated by Security Forces personnel for other than expiration, a receipt will be issued to the individual to preclude a $50.00 charge. Civilian and military retirees who conduct commercial business on base must an Identification Credential through their place of employment. ALSO OF SPECIAL NOTE, in accordance with TAFBI 31-101 para 4.1, contract employees will consent to a security background check conducted by 72 SFS/S5P.

List of Attachments

The following attachments were added:

ADDENDUM TO FAR 52.212-2 9 DEC 2021

ADDENDUM TO FAR 52.212-1 9 DEC 2021

PWS Technical Training Services GFP_FA813222R0002_Attachment2 Class Price List 9 Dec

The following attachments were deleted:

ADDENDUM TO FAR 52.212-2 Evaluation Factors for Award ADDENDUM TO FAR 52.212-1 Instruction to Offerors Technical Training - PWS 17Nov21 GFP_FA813221R0005_10Nov21 Technical Training Pricing Sheet

3001 STAFF DR BLDG 3001 STE 2S76

CP 405 739 2084

TINKER AFB, OK 73145-3303

UNITED STATES

Sacia Fowler, Email: sacia.fowler@us.af.mil Telephone: 405-339-9120

Email: sacia.fowler@us.af.mil Telephone: 405-339-9120