2015-582-4934-01_Tech_Eval_December_2015_v4.docx
DOCX document 22 KB Posted
- Attached to
- SHEETMETAL GUILLOTINE IAW SOW
- Solicitation number
- FA8126-16-Q-0025
About this file
Revised Technical Evaluation
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Technical Evaluation Sheet Metal Guillotine Machine Name of Supplier ________________
| Requirement |
| Technically |
Acceptable Technically Unacceptable
System is able to unroll, straighten and cutoff to SOW requirements.
Able to handle aluminum, stainless steel and Inconel to SOW requirements as listed in SOW Table 1 and Sec 4.1.
System shall include three material carts designed to integrate into the system while also being capable of being used independently to transport material rolls. Sec 4.1
System shall include a straightener (leveler) section with its own feed system. Sec 4.2
System shall have a cutting section with its own feed system. Sec 4.3
Burr along cut edge is no greater than 0.001 inch tall. Sec 4.3
Alignment of cut edge is within the tolerance of +/- 0.1. Sec 4.3
Overall cut length is within tolerance of +/- .025 tolerance. Sec 4.3
Control Display, E-stop, alarms. Sections 5 and 6
Reviewed by: ______________________ Organization: ______________________ Phone: ___________________________
File details come from the government source that posted it. Updated .