SOW_Network_Analyzers_Revision_1_(13-November_2015).docx
DOCX document 23 KB Posted
- Attached to
- NETWORK ANALYZERS Federal contract opportunity
- Solicitation number
- FA8126-16-Q-0022
About this file
REVISION 1 - STATEMENT OF WORK (SOW) DATED 13-NOVEMBER 2015
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| REVISION_1_Questions_and_Answers_-_Solicitation_FA8126-16-Q-0022-0001_Network_Analyzers__(13-November_2015)_.pdf | ||
| Amendment_-_Solicitation_FA8126-16-Q-0022-0001_Network_Analyzers.doc | DOC document | |
| Tech_Eval_Criteria_-_Network_Analyzers_Revision_1_(13-November_2015).docx | DOCX document | |
| Questions_and_Answers_-_Solicitation_PR_F3YCFH5275A002_Network_Analyzers_.pdf | ||
| SOW_Network_Analyzers.docx | DOCX document | |
| Tech_Eval_Criteria_-_MB-2016-0037_Network_Analyzers.docx | DOCX document | |
| SOLICITATION_FA8126-16-Q-0022.doc | DOC document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1 SCOPE. This Statement of Work (SOW) defines the requirement for providing two network analyzers.
1.1 Background. The B-1 Robotic Arm Range utilizes a network analyzer as a microwave transmitter, receiver and data acquisition equipment. The B-1 Low Observable Antenna shop also utilizes a network analyzer of equivalent specifications to test waveguide switches for Voltage Standing Wave Ratio and insertion loss. Due to the network analyzers having similar specifications, one can be used with the other workload if the other unit is out for calibration. This redundancy greater prevents downtime.
2 REQUIREMENTS.
2.1 General. The network analyzer provided by this contract shall be new and a current production model. Additional requirements are listed below.
2.1.1 The network analyzer shall have an operating frequency range from 2 GHz to 40 GHz with a dynamic range of not less than 75 dB.
2.1.2 The network analyzer shall have a minimum of two (2) ports for performing bi-directional S-Parameter measurements.
2.1.3 The network analyzer shall meet the following requirements for measurement accuracy.
2.1.3.1 Reflection uncertainty shall be equal to or less than 3 dB for any S11 measurment of a device or material with a -25 dB or less reflection coefficient.
2.1.3.2 Transmisssion magnitude uncertainty shall be equal or less than 0.3 dB for any S21 measurement of a device or material with a -60 or greater transmission coefficient.
2.1.4 The network analyzer shall be capable of measuring and recording a minimum of one data point every 0.5 milliseconds.
2.1.5 The network analyzer shall be capable of being controlled remotely via an interface on a separate computer. It shall be compatible with both desktop and laptop computers.
2.1.6 The network analyzer shall be capable of masking transmitted frequencies for security purposes.
2.1.7 The Contractor shall provide one calibration kit designed for use with the network analyzers as a part of this purchase.
Revision 1 November 13, 2015
File details come from the government source that posted it. Updated .