3030906_QAIRQMT_REPORT.pdf
PDF 82 KB Posted
- Attached to
- F100 Lock Ring, Turbine N Federal contract opportunity
- Solicitation number
- FA812123R0026
About this file
This document is a quality assurance report for a federal contract opportunity. It specifies that the contract is for F100 Lock Ring, Turbine N under solicitation number FA812123R0026 issued by the Department of the Air Force Materiel Command Air Force Sustainment Center. The report recommends the contract include higher level quality requirements of ISO 9001:2000 and notes this is a critical safety item. It identifies the item manager and equipment specification points of contact, and requires the contractor certify conformance. The technical authority signature indicates pre-award survey of a new source is required given previous performance was from another supplier.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| DID_Test_Inspect.pdf | ||
| 3709067_BIDSET_REPORT.pdf | ||
| 2901456_SMW_REPORT.pdf | ||
| FA812123R0026.pdf | ||
| 3568211_CDRL1_REPORT.pdf | ||
| 3698873_FA_REPORT.pdf | ||
| 2986513_EDL_REPORT.pdf | ||
| DID_FA.pdf | ||
| FA Test_Plans.pdf | ||
| 3703513_TRNSPDATA_REPORT.pdf | ||
| 3703512_PKGRQMT_REPORT.pdf | ||
| 3689402_QUALRQMT.pdf | ||
| 2901454_QUALRQMT.pdf | ||
| 1573896_ITMDESC_REPORT.pdf | ||
| 2835331_UIIEC_REPORT.pdf | ||
| Surplus_Material_Eval.pdf |
Show all 16
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RECOMMENDED QUALITY ASSURANCE PROVISIONS
AND SPECIAL INSPECTION REQUIREMENTS
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
2840016195780NZ
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Wilson, Karen A / 405-734-8797
6. EQUIPMENT SPEC / PHONE
Wright, Daniel / 405-622-7481
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Ulrich, Scott CNAME: 19 MAY 2020DATE:
This is a Critical Safety Item (CSI).
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Ulrich, Scott C
ORGANIZATION / SYMBOL
AFLCMC / LPSEA
PHONE
405-734-8798 / 884-8798
DATE
19 MAY 2020
Page 1 of 1AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 31 May 2023
File details come from the government source that posted it. Updated .