2667929_CDRL1_REPORT.pdf

CONTRACT DATA REQUIREMENTS LIST Form Approved OMB No. 0704-0188(1 Data Item)

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Executive Services Directorate (0704-0188).

Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

A001

2. TITLE OF DATA ITEM

Commercial Asset Visibility AF (CAV AF) End Item Reporting

3. SUBTITLE

CAV AF

4. AUTHORITY

DI-MGMT-81634C

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS/SOW

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

See Block 16

10. FREQUENCY

See Block 16

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 27 APR 2017DATE:

1. The contractor shall report End Item transactional data through electronic submission in CAV AF using the CAV AF web site or CICA XML IAW the referenced DID IAW and/or CAV AF CFM SOW. This information will be accessed by the program office PMS and by 848 SCMG/SRM in order to ascertain production status.

2. Transactions and data will be submitted by the contractor daily IAW CAV AF User Guide, Version 8.0.1 or higher.

The Contractor shall obtain a valid DoD PKI certificate to log into CAV AF. Each user shall be required to have an Identity Certificate only; an encryption certificate is not required.

3. Training will be provided by 848 SCMG/SRM, (405) 736-7171.

4. This DD Form 1423-1 applies to Contractor Furnished Materiel (CFM) type contracts.

Block 10:

a. Contractor reporting requirements to CAV AF shall be accomplished daily and/or within 24 hrs of a supply or maintenance action occurrence IAW Contractor Users Guide.

b. The method of communication from the contractor to the Air Logistics Complex (ALC) will be mechanized using the CAV AF Online web site IAW CAV AF Contractor Users Guide.

Block 11: Data shall be current within 24 hours of last End Item maintenance occurrence.

Block 12: Date of first submission shall be within 24 hours following a supply or maintenance transaction after the contract award date and government training as specified in IAW CAV AF Users Guide.

Block 13: Same as remarks regarding Block 10 above.

COORDINATORS:

OC-ALC 0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 1 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

PREVIOUS EDITION MAY BE USED.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

A002

2. TITLE OF DATA ITEM

Contract Depot Maintenance (CDM) Production Report

3. SUBTITLE

CDM Prod

4. AUTHORITY

DI-PSSS-81995

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

N/A

10. FREQUENCY

MTHLY

11. AS OF DATE

SEE BLOCK 16

12. DATE OF FIRST

SUBMISSION

SEE BLOCK 16

13. DATE OF SUBSEQUENT

SUBMISSION

SEE BLOCK 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 19 NOV 2018DATE:

Manual Report:

Ref Block 11, 12, and 13:

Contractor shall report by contract delivery order on all applicable categories, totals and on-hand balances, IAW DI- PSSS-81995, providing TABLE I for EACH repair location, including subcontractor facilities, for the contracts maintenance occurrence actions during the reporting period.

Contractor shall report on production, providing TABLE I for EACH repair location, including subcontractor facilities, for which the contractor produced assets during the reporting period.

Reports will continue to be forwarded unless terminated by the 422 SCMS/GUME Production Management Specialist (PMS). The report following the final reporting period on contract will be annotated "Final Report".

Complete address for distribution:

422 SCMS/GUME

3001 Staff Drive, Annex 4, Suite 1AG1 92B Tinker AFB, OK 73145-3033

Commercial phone number: (405)-582-9685 Email preferred: Christi.Berry.1@us.af.mil

CONTRACTOR FORMAT ACCEPTABLE UNLESS OTHERWISE DEFINED BY APPLICABLE DATA ITEM

DESCRIPTION (DID).

DID Requirements are NOT tailored.

Delivery CANNOT be deferred.

The contractor's CAV AF reporting shall reflect their inventory property control management system data records which shall represent timely and accurate accountability of AF inventory assets at the physical location(s) of the contractor's repair facility (including subcontractor facilities); shop floor, bond room and/or receiving/shipping docks, etc. for each repair, The report shall be provided within 5 business days of the previous month's last calendar date.

COORDINATORS:

422 SCMS/GUME

3001 Staff Drive, Annex 4, Suite 1AG1 92B Tinker AFB, OK 73145-3033 Attention: Michelle C. Berry

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 2 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

A003

2. TITLE OF DATA ITEM

Contract Government Furnished Material (GFM) Requisition and Inventory Report

3. SUBTITLE

N/A

4. AUTHORITY

DI-MGMT-82128

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

N/A

10. FREQUENCY

MTHLY

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 13 APR 2018DATE:

DID DI-MGMT-82128, Contract Government Furnished Material (GFM) Requisition and Inventory Report, prescribes the format, content, and preparation instructions for the data product required to meet this requirement.

Contractor shall provide a breakout of all GFM inventory within the report by contract and delivery order, including a Table for each designated repair facility / DoDAAC location for which the contractor has received inventory during the reporting period, including Subcontractor facilities. Table data shall represent the GFM data elements as indicated in the Authority named in Block 4.

The contractor's CAV AF reporting shall reflect their inventory property control management system data records which shall represent timely and accurate accountability of AF inventory assets at the physical location(s) of the contractor's repair facility; shop floor, bond room and/or receiving/shipping docks, etc. for each repair facility location, including sub-contractor locations.

Block 11. Data shall be current as of the last date of the reporting period (end of month).

Block 12. The first report should be submitted within five (5) business days after the close of the first reporting period (previous month's last calendar date).

Block 13. Subsequent reports shall be submitted within five (5) business days of the close of the reporting period (previous month's last calendar date).

The contractor inventory property control management system data records shall represent timely and accurate accountability of AF inventory assets at the physical location(s) of the contractor's repair facility; shop floor, bond room and/or receiving/shipping docks, etc.

for each repair facility location.

COORDINATORS:

422 SCMS/GUME 0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 3 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

A004

2. TITLE OF DATA ITEM

Government Property Inventory Report

3. SUBTITLE

N/A

4. AUTHORITY

DI-MGMT-80441C

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS/SOW

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

N/A

10. FREQUENCY

ANNLY

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 22 MAY 2018DATE:

DI-MGMT-80441C, Government Property Inventory Report, prescribes the format, content, and preparation instructions for the data product required to meet this requirement.

Contractor shall provide in Microsoft Excel (.xls or .xlsx compatible) format. The contractor shall conduct an annual 100% physical inventory over the course of a year's time of each NIIN as not to impede maintenance operations. Upon completion of each NIINs 100% physical inventory, the contractor shall provide the AF government an inventory listing of the result of all AF Government Furnished Property (GFP) in the contractor's possession, by contract, and by National Stock Number (NSN). The Contractor shall submit a Table for each designated repair facility / DoDAAC location for which the contractor has received inventory during the reporting period, including Subcontractor facilities. The report should include all AF Government Furnished Property in possession of the Contractor.

The contractor's CAV AF reporting shall reflect their inventory property control management system data records which shall represent timely and accurate accountability of AF inventory assets at the physical location(s) of the contractor's repair facility (including subcontractor facilities); shop floor, bond room and/or receiving/shipping docks, etc. for each repair facility location, including sub-contractor locations.

Report shall contain the following columns/data fields:

A: Contract Number B: CAGE Code C: Item Name/Description D: Manufacturer Name E: Manufacturer Part Number (if applicable) F: Material Control Number (if applicable) G: Serial Number (if applicable) H: National Stock Number (NSN) I: Quantity J: Unit of Measure K: Unit Acquisition Cost L: Location M: Sub Location N: Unique Item Identifier O: Type of Government Property - i.e., Government Furnished Property (GFP) or Contractor Acquired Property (CAP) P: Classification of Government Property- (i.e,, Equipment (EQP), Material (MAT), Special Test Equipment (STE), or Special Tooling (ST) Q: Posting Reference R: Date of Transaction S: Date Placed in Service T: Date of Last Physical Inventory U: Condition Code

Block 10. This report will be provided annually. Reporting Period is one year.

Block 11. The data is representative of the Contractor's Internal Property Control System and shall be current as of the last day of the annual reporting period (If period of performance begins on 13 September 17, first annual reporting period ends 12 September 18). If requested outside of an annual cadence, the data shall be current as of the date requested.

Blocks 12 and 13. The report shall be delivered within seven (7) calendar days of the end of the first reporting period and annually thereafter, or within seven (7) calendar days of government request.

422 SCMS/GUME 0 1 0

0 1 015. TOTAL

Page 4 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

COORDINATORS:

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

A005

2. TITLE OF DATA ITEM

Technical Order Improvement Report and Reply

3. SUBTITLE

AFTO Form 22

4. AUTHORITY

DI-TMSS-80229D

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

ASREQ

11. AS OF DATE

As Required

12. DATE OF FIRST

SUBMISSION

As Required

13. DATE OF SUBSEQUENT

SUBMISSION

As Required

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 19 NOV 2018DATE:

Changes to the office symbols shall be made by letter through the PCO/ACO without revision to this CDRL.

This report shall be submitted IAW TO 00-5-1 using AFTO 22 for Air Force TOs. The contractor shall report when an error or improvement changes the meaning of the instructions or information contained in the technical directives where it may prevent mission performance. Also, this report shall be used by the contractor to indicate omissions of pertinent overhaul procedures in TOs or desired changes to TO date.

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, Critical Technology. Other requests shall be referred to 422 SCMS/GUEA.

Control Warning Notice: Warning - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC, Sec 2751 Et Seq) or the Export Administration Act of 1979, Title 50, USC, App 240 I Et Seq, as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

Destruction Notice for Unclassified Documents: destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5220.0 I M, Information Security Program , Vol 3, Protection of Classified Information.

COORDINATORS:

422 SCMS/GUME

3001 Staff Drive, Annex 4, Suite 1AG1 92B Tinker Air Force Base, Oklahoma 73145-3033

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 5 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

A006

2. TITLE OF DATA ITEM

Teardown Deficiency Report

3. SUBTITLE

TDR

4. AUTHORITY

DI-PSSS-81534A

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

LT

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

See Block 16

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 02 OCT 2018DATE:

Changes to the office symbols shall be made by letter through the PCO/ACO without revision to this CDRL.

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, Critical Technology. Other requests shall be referred to 422 SCMS/GUEA.

Control Warning Notice: Warning - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC, Sec 2751 Et Seq) or the Export Administration Act of 1979, Title 50, USC, App 240 I Et Seq, as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

Destruction Notice for Unclassified Documents: destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5220.0 I M, Information Security Program , Vol 3, Protection of Classified Information.

BLOCKS 10, 11, 12, and 13: To be negotiated upon government's request.

COORDINATORS:

422 SCMS/GUME 0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 6 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

A007

2. TITLE OF DATA ITEM

Counterfeit Prevention Plan (CPP)

3. SUBTITLE

N/A

4. AUTHORITY

DI-MISC-81832

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

N/A

6. REQUIRING OFFICE

422 SCMS/GUEA

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

See Block 16

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 12 OCT 2018DATE:

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, Critical Technology. Other requests shall be referred to 422 SCMS/GUEA.

Control Warning Notice: Warning - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC, Sec 2751 Et Seq) or the Export Administration Act of 1979, Title 50, USC, App 240 I Et Seq, as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

Destruction Notice for Unclassified Documents: destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5220.0 I M, Information Security Program , Vol 3, Protection of Classified Information.

The plan shall be delivered in electronic PDF format through the Wide Area Workflow (WAWF) system no later than 90 calendar days after contract award. (FA8117)

Contractor format acceptable unless otherwise defined by applicable Data Item Description (DID).

DID Requirements are NOT tailored.

Delivery CANNOT be deferred.

COORDINATORS:

422 SCMS/GUEA

3001 Staff Drive Tinker AFB, OK 73145

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 7 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

A008

2. TITLE OF DATA ITEM

Engineering Change Proposal (ECP)

3. SUBTITLE

N/A

4. AUTHORITY

DI-SESS-80639D

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

ASREQ

11. AS OF DATE

N/A

12. DATE OF FIRST

SUBMISSION

N/A

13. DATE OF SUBSEQUENT

SUBMISSION

N/A

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 15 NOV 2018DATE:

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, Critical Technology. Other requests shall be referred to 422 SCMS/GUEA.

Control Warning Notice: Warning - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC, Sec 2751 Et Seq) or the Export Administration Act of 1979, Title 50, USC, App 240 I Et Seq, as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

Destruction Notice for Unclassified Documents: destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5220.0 I M, Information Security Program , Vol 3, Protection of Classified Information.

Contractor Format Acceptable

DID Requirements NOT Tailored

Delivery Cannot Be Deferred

COORDINATORS:

422 SCMS/GUEA 0 1 0

422 SCMS/GUME

3001 Staff Drive Tinker AFB, OK 73145

0 1 0

0 2 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 8 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

A009

2. TITLE OF DATA ITEM

Item Unique Identification (IUID) Marking Plan

3. SUBTITLE

N/A

4. AUTHORITY

DI-MGMT-81803

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS 1.18.9.1

6. REQUIRING OFFICE

422 SCMS/GUEA

7. DD 250 REQ

LT

8. APP CODE

A

9. DIST STATEMENT

REQUIRED

See Block 16

10. FREQUENCY

ASREQ

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

ASREQ

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 19 NOV 2018DATE:

Blk 4: Contractor format or AS 9102 format or equivalent is acceptable. The complete contract number, CDRL number, Document Name, Date of Submission and Document Number shall appear on the first page of deliverable.

Blk 8: Government written notice of approval/disapproval is due 30 days after receipt of contractor's report.

Blk 9: Per DoDI 5230.24. Refer other requests for this document to 422 SCMS/GUEAB, Tinker AFB, OK 73145.

Blk 11, 12, and 13: Submit NLT 30 Days after contract award.

Documents comments/approval will be provided within 30 day after receipt. The contractor shall resubmit within 15 days after receipt of Government comments.

CONTRACTOR FORMAT ACCEPTABLE

DID REQUIREMENTS NOT TAILORED

DELIVERY CANNOT BE DEFERRED

COORDINATORS:

422nd SCMS/GUEA Attn: Tuan Ha 4750 Staff Drive Bldg 3220 Rm 104 Tinker AFB, OK 73145

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 9 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

A010

2. TITLE OF DATA ITEM

Item Unique Identification (IUID) Marking Activity, Validation and Verification Report

3. SUBTITLE

N/A

4. AUTHORITY

DI-MGMT-81804A

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS 1.18.9.2

6. REQUIRING OFFICE

422 SCMS/GUEA

7. DD 250 REQ

LT

8. APP CODE

A

9. DIST STATEMENT

REQUIRED

See Block 16

10. FREQUENCY

ASREQ

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

ASREQ

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 19 NOV 2018DATE:

Blk 4: Contractor format or AS 9102 format or equivalent is acceptable. The complete contract number, CDRL number, Document Name, Date of Submission and Document Number shall appear on the first page of deliverable.

Blk 8: Government written notice of approval/disapproval is due 60 days after receipt of contractor's report.

Blk 9: Per DoDI 5230.24. Refer other requests for this document to 422 SCMS/GUEAB, Tinker AFB, OK 73145.

Blk 11, 12, and 13: Submit NLT 60 Days after contract award.

Documents comments/approval will be provided within 30 day after receipt. The contractor shall resubmit within 15 days after receipt of Government comments.

CONTRACTOR FORMAT ACCEPTABLE

DID REQUIREMENTS NOT TAILORED

DELIVERY CANNOT BE DEFERRED

COORDINATORS:

422nd SCMS/GUEA Att: Tuan Ha 4750 Staff Drive Bldg 3220 Rm 104 Tinker AFB, OK 73145

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 10 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

B001

2. TITLE OF DATA ITEM

Commercial Asset Visibility AF (CAV AF) End Item Reporting

3. SUBTITLE

CAV AF

4. AUTHORITY

DI-MGMT-81634C

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS/SOW

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

See Block 16

10. FREQUENCY

See Block 16

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 27 APR 2017DATE:

1. The contractor shall report End Item transactional data through electronic submission in CAV AF using the CAV AF web site or CICA XML IAW the referenced DID IAW and/or CAV AF CFM SOW. This information will be accessed by the program office PMS and by 848 SCMG/SRM in order to ascertain production status.

2. Transactions and data will be submitted by the contractor daily IAW CAV AF User Guide, Version 8.0.1 or higher.

The Contractor shall obtain a valid DoD PKI certificate to log into CAV AF. Each user shall be required to have an Identity Certificate only; an encryption certificate is not required.

3. Training will be provided by 848 SCMG/SRM, (405) 736-7171.

4. This DD Form 1423-1 applies to Contractor Furnished Materiel (CFM) type contracts.

Block 10:

a. Contractor reporting requirements to CAV AF shall be accomplished daily and/or within 24 hrs of a supply or maintenance action occurrence IAW Contractor Users Guide.

b. The method of communication from the contractor to the Air Logistics Complex (ALC) will be mechanized using the CAV AF Online web site IAW CAV AF Contractor Users Guide.

Block 11: Data shall be current within 24 hours of last End Item maintenance occurrence.

Block 12: Date of first submission shall be within 24 hours following a supply or maintenance transaction after the contract award date and government training as specified in IAW CAV AF Users Guide.

Block 13: Same as remarks regarding Block 10 above.

COORDINATORS:

OC-ALC 0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 11 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

B002

2. TITLE OF DATA ITEM

Contract Depot Maintenance (CDM) Production Report

3. SUBTITLE

CDM Prod

4. AUTHORITY

DI-PSSS-81995

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

N/A

10. FREQUENCY

MTHLY

11. AS OF DATE

SEE BLOCK 16

12. DATE OF FIRST

SUBMISSION

SEE BLOCK 16

13. DATE OF SUBSEQUENT

SUBMISSION

SEE BLOCK 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 19 NOV 2018DATE:

Manual Report:

Ref Block 11, 12, and 13:

Contractor shall report by contract delivery order on all applicable categories, totals and on-hand balances, IAW DI- PSSS-81995, providing TABLE I for EACH repair location, including subcontractor facilities, for the contracts maintenance occurrence actions during the reporting period.

Contractor shall report on production, providing TABLE I for EACH repair location, including subcontractor facilities, for which the contractor produced assets during the reporting period.

Reports will continue to be forwarded unless terminated by the 422 SCMS/GUME Production Management Specialist (PMS). The report following the final reporting period on contract will be annotated "Final Report".

Complete address for distribution:

422 SCMS/GUME

3001 Staff Drive, Annex 4, Suite 1AG1 92B Tinker AFB, OK 73145-3033

Commercial phone number: (405)-582-9685 Email preferred: Christi.Berry.1@us.af.mil

CONTRACTOR FORMAT ACCEPTABLE UNLESS OTHERWISE DEFINED BY APPLICABLE DATA ITEM

DESCRIPTION (DID).

DID Requirements are NOT tailored.

Delivery CANNOT be deferred.

The contractor's CAV AF reporting shall reflect their inventory property control management system data records which shall represent timely and accurate accountability of AF inventory assets at the physical location(s) of the contractor's repair facility (including subcontractor facilities); shop floor, bond room and/or receiving/shipping docks, etc. for each repair, The report shall be provided within 5 business days of the previous month's last calendar date.

COORDINATORS:

422 SCMS/GUME

3001 Staff Drive, Annex 4, Suite 1AG1 92B Tinker AFB, OK 73145-3033 Attention: Michelle C. Berry

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 12 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

B003

2. TITLE OF DATA ITEM

Contract Government Furnished Material (GFM) Requisition and Inventory Report

3. SUBTITLE

N/A

4. AUTHORITY

DI-MGMT-82128

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

N/A

10. FREQUENCY

MTHLY

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 13 APR 2018DATE:

DID DI-MGMT-82128, Contract Government Furnished Material (GFM) Requisition and Inventory Report, prescribes the format, content, and preparation instructions for the data product required to meet this requirement.

Contractor shall provide a breakout of all GFM inventory within the report by contract and delivery order, including a Table for each designated repair facility / DoDAAC location for which the contractor has received inventory during the reporting period, including Subcontractor facilities. Table data shall represent the GFM data elements as indicated in the Authority named in Block 4.

The contractor's CAV AF reporting shall reflect their inventory property control management system data records which shall represent timely and accurate accountability of AF inventory assets at the physical location(s) of the contractor's repair facility; shop floor, bond room and/or receiving/shipping docks, etc. for each repair facility location, including sub-contractor locations.

Block 11. Data shall be current as of the last date of the reporting period (end of month).

Block 12. The first report should be submitted within five (5) business days after the close of the first reporting period (previous month's last calendar date).

Block 13. Subsequent reports shall be submitted within five (5) business days of the close of the reporting period (previous month's last calendar date).

The contractor inventory property control management system data records shall represent timely and accurate accountability of AF inventory assets at the physical location(s) of the contractor's repair facility; shop floor, bond room and/or receiving/shipping docks, etc.

for each repair facility location.

COORDINATORS:

422 SCMS/GUME 0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 13 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

B004

2. TITLE OF DATA ITEM

Government Property Inventory Report

3. SUBTITLE

N/A

4. AUTHORITY

DI-MGMT-80441C

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS/SOW

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

N/A

10. FREQUENCY

ANNLY

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 22 MAY 2018DATE:

DI-MGMT-80441C, Government Property Inventory Report, prescribes the format, content, and preparation instructions for the data product required to meet this requirement.

Contractor shall provide in Microsoft Excel (.xls or .xlsx compatible) format. The contractor shall conduct an annual 100% physical inventory over the course of a year's time of each NIIN as not to impede maintenance operations. Upon completion of each NIINs 100% physical inventory, the contractor shall provide the AF government an inventory listing of the result of all AF Government Furnished Property (GFP) in the contractor's possession, by contract, and by National Stock Number (NSN). The Contractor shall submit a Table for each designated repair facility / DoDAAC location for which the contractor has received inventory during the reporting period, including Subcontractor facilities. The report should include all AF Government Furnished Property in possession of the Contractor.

The contractor's CAV AF reporting shall reflect their inventory property control management system data records which shall represent timely and accurate accountability of AF inventory assets at the physical location(s) of the contractor's repair facility (including subcontractor facilities); shop floor, bond room and/or receiving/shipping docks, etc. for each repair facility location, including sub-contractor locations.

Report shall contain the following columns/data fields:

A: Contract Number B: CAGE Code C: Item Name/Description D: Manufacturer Name E: Manufacturer Part Number (if applicable) F: Material Control Number (if applicable) G: Serial Number (if applicable) H: National Stock Number (NSN) I: Quantity J: Unit of Measure K: Unit Acquisition Cost L: Location M: Sub Location N: Unique Item Identifier O: Type of Government Property - i.e., Government Furnished Property (GFP) or Contractor Acquired Property (CAP) P: Classification of Government Property- (i.e,, Equipment (EQP), Material (MAT), Special Test Equipment (STE), or Special Tooling (ST) Q: Posting Reference R: Date of Transaction S: Date Placed in Service T: Date of Last Physical Inventory U: Condition Code

Block 10. This report will be provided annually. Reporting Period is one year.

Block 11. The data is representative of the Contractor's Internal Property Control System and shall be current as of the last day of the annual reporting period (If period of performance begins on 13 September 17, first annual reporting period ends 12 September 18). If requested outside of an annual cadence, the data shall be current as of the date requested.

Blocks 12 and 13. The report shall be delivered within seven (7) calendar days of the end of the first reporting period and annually thereafter, or within seven (7) calendar days of government request.

422 SCMS/GUME 0 1 0

0 1 015. TOTAL

Page 14 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

COORDINATORS:

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

B005

2. TITLE OF DATA ITEM

Technical Order Improvement Report and Reply

3. SUBTITLE

AFTO Form 22

4. AUTHORITY

DI-TMSS-80229D

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

ASREQ

11. AS OF DATE

As Required

12. DATE OF FIRST

SUBMISSION

As Required

13. DATE OF SUBSEQUENT

SUBMISSION

As Required

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 19 NOV 2018DATE:

Changes to the office symbols shall be made by letter through the PCO/ACO without revision to this CDRL.

This report shall be submitted IAW TO 00-5-1 using AFTO 22 for Air Force TOs. The contractor shall report when an error or improvement changes the meaning of the instructions or information contained in the technical directives where it may prevent mission performance. Also, this report shall be used by the contractor to indicate omissions of pertinent overhaul procedures in TOs or desired changes to TO date.

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, Critical Technology. Other requests shall be referred to 422 SCMS/GUEA.

Control Warning Notice: Warning - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC, Sec 2751 Et Seq) or the Export Administration Act of 1979, Title 50, USC, App 240 I Et Seq, as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

Destruction Notice for Unclassified Documents: destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5220.0 I M, Information Security Program , Vol 3, Protection of Classified Information.

COORDINATORS:

422 SCMS/GUME

3001 Staff Drive, Annex 4, Suite 1AG1 92B Tinker Air Force Base, Oklahoma 73145-3033

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 15 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

B006

2. TITLE OF DATA ITEM

Teardown Deficiency Report

3. SUBTITLE

TDR

4. AUTHORITY

DI-PSSS-81534A

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

LT

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

See Block 16

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 02 OCT 2018DATE:

Changes to the office symbols shall be made by letter through the PCO/ACO without revision to this CDRL.

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, Critical Technology. Other requests shall be referred to 422 SCMS/GUEA.

Control Warning Notice: Warning - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC, Sec 2751 Et Seq) or the Export Administration Act of 1979, Title 50, USC, App 240 I Et Seq, as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

Destruction Notice for Unclassified Documents: destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5220.0 I M, Information Security Program , Vol 3, Protection of Classified Information.

BLOCKS 10, 11, 12, and 13: To be negotiated upon government's request.

COORDINATORS:

422 SCMS/GUME 0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 16 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

B007

2. TITLE OF DATA ITEM

Counterfeit Prevention Plan (CPP)

3. SUBTITLE

N/A

4. AUTHORITY

DI-MISC-81832

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

N/A

6. REQUIRING OFFICE

422 SCMS/GUEA

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

See Block 16

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 12 OCT 2018DATE:

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, Critical Technology. Other requests shall be referred to 422 SCMS/GUEA.

Control Warning Notice: Warning - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC, Sec 2751 Et Seq) or the Export Administration Act of 1979, Title 50, USC, App 240 I Et Seq, as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

Destruction Notice for Unclassified Documents: destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5220.0 I M, Information Security Program , Vol 3, Protection of Classified Information.

The plan shall be delivered in electronic PDF format through the Wide Area Workflow (WAWF) system no later than 90 calendar days after contract award. (FA8117)

Contractor format acceptable unless otherwise defined by applicable Data Item Description (DID).

DID Requirements are NOT tailored.

Delivery CANNOT be deferred.

COORDINATORS:

422 SCMS/GUEA

3001 Staff Drive Tinker AFB, OK 73145

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 17 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

B008

2. TITLE OF DATA ITEM

Engineering Change Proposal (ECP)

3. SUBTITLE

N/A

4. AUTHORITY

DI-SESS-80639D

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

ASREQ

11. AS OF DATE

N/A

12. DATE OF FIRST

SUBMISSION

N/A

13. DATE OF SUBSEQUENT

SUBMISSION

N/A

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 15 NOV 2018DATE:

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD Contractors only, Critical Technology. Other requests shall be referred to 422 SCMS/GUEA.

Control Warning Notice: Warning - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC, Sec 2751 Et Seq) or the Export Administration Act of 1979, Title 50, USC, App 240 I Et Seq, as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

Destruction Notice for Unclassified Documents: destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5220.0 I M, Information Security Program , Vol 3, Protection of Classified Information.

Contractor Format Acceptable

DID Requirements NOT Tailored

Delivery Cannot Be Deferred

COORDINATORS:

422 SCMS/GUEA 0 1 0

422 SCMS/GUME

3001 Staff Drive Tinker AFB, OK 73145

0 1 0

0 2 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 18 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

B009

2. TITLE OF DATA ITEM

Item Unique Identification (IUID) Marking Plan

3. SUBTITLE

N/A

4. AUTHORITY

DI-MGMT-81803

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS 1.18.9.1

6. REQUIRING OFFICE

422 SCMS/GUEA

7. DD 250 REQ

LT

8. APP CODE

A

9. DIST STATEMENT

REQUIRED

See Block 16

10. FREQUENCY

ASREQ

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

ASREQ

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 19 NOV 2018DATE:

Blk 4: Contractor format or AS 9102 format or equivalent is acceptable. The complete contract number, CDRL number, Document Name, Date of Submission and Document Number shall appear on the first page of deliverable.

Blk 8: Government written notice of approval/disapproval is due 30 days after receipt of contractor's report.

Blk 9: Per DoDI 5230.24. Refer other requests for this document to 422 SCMS/GUEAB, Tinker AFB, OK 73145.

Blk 11, 12, and 13: Submit NLT 30 Days after contract award.

Documents comments/approval will be provided within 30 day after receipt. The contractor shall resubmit within 15 days after receipt of Government comments.

CONTRACTOR FORMAT ACCEPTABLE

DID REQUIREMENTS NOT TAILORED

DELIVERY CANNOT BE DEFERRED

COORDINATORS:

422nd SCMS/GUEA Attn: Tuan Ha 4750 Staff Drive Bldg 3220 Rm 104 Tinker AFB, OK 73145

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 19 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

B010

2. TITLE OF DATA ITEM

Item Unique Identification (IUID) Marking Activity, Validation and Verification Report

3. SUBTITLE

N/A

4. AUTHORITY

DI-MGMT-81804A

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS 1.18.9.2

6. REQUIRING OFFICE

422 SCMS/GUEA

7. DD 250 REQ

LT

8. APP CODE

A

9. DIST STATEMENT

REQUIRED

See Block 16

10. FREQUENCY

ASREQ

11. AS OF DATE

See Block 16

12. DATE OF FIRST

SUBMISSION

See Block 16

13. DATE OF SUBSEQUENT

SUBMISSION

ASREQ

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 19 NOV 2018DATE:

Blk 4: Contractor format or AS 9102 format or equivalent is acceptable. The complete contract number, CDRL number, Document Name, Date of Submission and Document Number shall appear on the first page of deliverable.

Blk 8: Government written notice of approval/disapproval is due 60 days after receipt of contractor's report.

Blk 9: Per DoDI 5230.24. Refer other requests for this document to 422 SCMS/GUEAB, Tinker AFB, OK 73145.

Blk 11, 12, and 13: Submit NLT 60 Days after contract award.

Documents comments/approval will be provided within 30 day after receipt. The contractor shall resubmit within 15 days after receipt of Government comments.

CONTRACTOR FORMAT ACCEPTABLE

DID REQUIREMENTS NOT TAILORED

DELIVERY CANNOT BE DEFERRED

COORDINATORS:

422nd SCMS/GUEA Att: Tuan Ha 4750 Staff Drive Bldg 3220 Rm 104 Tinker AFB, OK 73145

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAB

405-736-7976

H. DATE

20 NOV 2018

I. APPROVED BY

//DIGITALLY SIGNED//

BERRY.CHRISTI.MICHELLE.1027789125

422 SCMS / GUME 405-582-9685 / 852-9685

J. DATE

20 NOV 2018

Page 20 of 50DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 18 Dec 2018

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

B-52 / Control, Alarm

E. CONTRACT / PR NO.

FD20301900676

F. CONTRACTOR

1. DATA ITEM NO.

C001

2. TITLE OF DATA ITEM

Commercial Asset Visibility AF (CAV AF) End Item Reporting

3. SUBTITLE

CAV AF

4. AUTHORITY

DI-MGMT-81634C

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

PWS/SOW

6. REQUIRING OFFICE

422 SCMS/GUME

7. DD 250 REQ

N…