FA810515R0001_______0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE Page 1

2. AMENDMENT/MODIFICATION NO.

FA8105-15-R-0001-0002

3. EFFECTIVE DATE

4. REQUISITION/PURCHASE REQ. NO.

FD20301530131

5. PROJECT NO (If applicable)

6. ISSUED BY CODE

DEPARTMENT OF THE AIR FORCE, AFLCMC WKDK

3001 STAFF DR STE 2AI 85A

TINKER AFB OK 73145-3303

BUYER: Jennifer Russ/LCMC/WKDK jennifer.russ@us.af.mil Phone: (405) 622- 7835 Fax: (405) 739-4446 No Collect Calls

7. ADMINISTERED BY (If other than item 6) CODEFA8105

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE

X

9A. AMENDMENT OF SOLICITATION NO.

FA810515R0001

9B. DATED (SEE ITEM 11)

29-OCT-2014

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods. ( a ) By completing Items 8 and 15, and returning copies of the amendment; ( b ) By acknowledging receipt of this amendment on each copy of the offer submitted; or ( c ) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified. 16-MAR-2015 4:00 PM

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Routine

15A. NAME AND TITLE OF SIGNER (Type or print)

15B. CONTRACTOR/OFFEROR

BY ________________________________________________________

(Signature of person authorized to sign)

15C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16B. UNITED STATES OF AMERICA

BY ____________________________________________________

(Signature of Contracting Officer)

16C. DATE SIGNED

FACILITY CODE

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE

30-105 STANDARD FORM 30 (REV. 10-83)

PRESCRIBED BY GSA

FAR (48 CFR) 53.243

X

X X

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

Amendment/Modification FA8105-15-R-0001-0002

Continuation of block 14. DESCRIPTION OF AMENDMENT/MODIFICATION

The purpose of this amendment is to update the PWS and add additional clauses to the solicitation.

FIRST: Attached updated PWS.

SECOND: Add additional clauses.

THIRD: All other terms and conditions remain unchanged and in full force and effect.

Request for Proposal FA8105-15-R-0001-0002

PART II - CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

52.204-2 SECURITY REQUIREMENTS (AUG 1996)

(IAW FAR 4.404(a))

252.204-7000 DISCLOSURE OF INFORMATION (AUG 2013)

(IAW DFARS 204.404-70(a))

252.204-7005 ORAL ATTESTATION OF SECURITY RESPONSIBILITIES (NOV 2001)

(IAW DFARS 204.404-70(c))

5352.204-9000 NOTIFICATION OF GOVERNMENT SECURITY ACTIVITY AND VISITOR GROUP

SECURITY AGREEMENTS (MAR 2012)

(IAW AFFARS 5304.404-90)

This contract contains a DD Form 254, DOD Contract Security Classification Specification, and requires performance at a government location in the U.S. or overseas. Prior to beginning operations involving classified information on an installation identified on the DD Form 254, the contractor shall take the following actions:

(a) At least thirty days prior to beginning operations, notify the Information Protection Office shown in the distribution block of the DD Form 254, as to:

(1) The name, address, and telephone number of this contract company's representative and designated alternate in the U.S. or overseas area, as appropriate;

(2) The contract number and military contracting command;

(3) The highest classification category of defense information to which contractor employees will have access;

(4) The Air Force installations in the U.S. (in overseas areas, identify only the APO number(s)) where the contract work will be performed;

(5) The date contractor operations will begin on base in the U.S. or in the overseas area;

(6) The estimated completion date of operations on base in the U.S. or in the overseas area; and

(7) Any changes to information previously provided under this clause.

This requirement is in addition to visit request procedures contained in DOD 5220.22-M, National Industrial Security Program Operating Manual.

(b) Prior to beginning operations involving classified information on an installation identified on the DD Form 254 where the contractor is not required to have a facility security clearance, the contractor shall enter into a Visitor Group Security Agreement (or understanding) with the installation commander to ensure that the contractor’s security procedures are properly integrated with those of the installation. As a minimum, the agreement shall identify the security actions that will be performed:

(1) By the installation for the contractor, such as providing storage and classified reproduction facilities, guard services, security forms, security inspections under DOD 5220.22-M, classified mail services, security badges, visitor control, and investigating security incidents; and

(2) Jointly by the contractor and the installation, such as packaging and addressing classified transmittals, security checks, internal security controls, and implementing emergency procedures to protect classified material.

52.215-11 PRICE REDUCTION FOR DEFECTIVE CERTIFIED COST OR PRICING

DATA--MODIFICATIONS (AUG 2011)

(IAW FAR 15.408(c))

52.215-21 REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER

THAN CERTIFIED COST OR PRICING DATA--MODIFICATIONS (OCT 2010)

(IAW FAR 15.408(m))

252.227-7013 RIGHTS IN TECHNICAL DATA--NONCOMMERCIAL ITEMS (FEB 2014)

(IAW DFARS 227.7102-4(b), DFARS 227.7103-6(a))

(e) (3) The Contractor asserts for itself, or the persons identified below, that the Government's rights to use, release, or disclose the following technical data should be restricted—

Technical Data to be Furnished With Restrictions*

Basis for Assertion**

Asserted Rights Category***

Name of person Asserting Restrictions****

(LIST) (LIST) (LIST) (LIST)

*If the assertion is applicable to items, components, or processes developed at private expense, identify both the data and each such item, component, or process.

**Generally, the development of an item, component, or process at private expense, either exclusively or partially, is the only basis for asserting restrictions on the Government's rights to use, release, or disclose technical data pertaining to such items, components, or processes. Indicate whether development was exclusively or partially at private expense. If development was not at private expense, enter the specific reason for asserting that the Government's rights should be restricted.

***Enter asserted rights category (e.g., government purpose license rights from a prior contract, rights in SBIR data generated under another contract, limited or government purpose rights under this or a prior contract, or specifically negotiated licenses).

****Corporation, individual, or other person, as appropriate.

Date ___________________________________ Printed Name ___________________________________ and Title ___________________________________ Signature ___________________________________

(End of identification and assertion)

(f) (2) Government purpose rights markings.

Data delivered or otherwise furnished to the Government purpose rights shall be marked as follows:

GOVERNMENT PURPOSE RIGHTS

Contract No __________________________________ Contractor Name __________________________________ Contractor Address

Expiration Date __________________________________

The Government's rights to use, modify, reproduce, release, perform, display, or disclose these technical data are restricted by paragraph (b)(2) of the Rights in Technical Data--Noncommercial Items clause contained in the above identified contract. No restrictions apply after the expiration date shown above. Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings.

(End of Legend)

(3) Limited rights markings.

Data delivered or otherwise furnished to the Government with limited rights shall be marked with the following legend:

LIMITED RIGHTS

Contract No __________________________________ Contractor Name __________________________________ Contractor Address __________________________________

The Government's rights to use, modify, reproduce, release, perform, display, or disclose these technical data are restricted by paragraph (b)(3) of the Rights in Technical Data--Noncommercial Items clause contained in the above identified contract. Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings. Any person, other than the Government, who has been provided access to such data must promptly notify the above name Contractor.

(End of legend)

(4) Special license rights markings.

(i) Data in which the Government's rights stem from a specifically negotiated license shall be marked with the following legend:

SPECIAL LICENSE RIGHTS

The Government's rights to use, modify, reproduce, release, perform, display, or disclose these data are restricted by Contract No. __________ (Insert contract number)_______, License No. __________ (Insert license identifier)______. Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings.

(End of legend)

252.227-7014 RIGHTS IN NONCOMMERCIAL COMPUTER SOFTWARE AND NONCOMMERCIAL

COMPUTER SOFTWARE DOCUMENTATION (FEB 2014)

(IAW DFARS 227.7203-6(a)(1))

(e) Identification and delivery of computer software and computer software documentation to be furnished with restriction on use, release, or disclosure.

(1) This paragraph does not apply to restrictions based solely on copyright.

(2) Except as provided in paragraph (e)(3) of this clause, computer software that the Contractor asserts should be furnished to the Government with restrictions on use, release, or disclosure is identified in an attachment to this contract (the Attachment). The Contractor shall not deliver any software with restrictive markings unless the software is listed on the Attachment.

(3) In addition to the assertions made in the Attachment, other assertions may be identified after award when based on new information or inadvertent omissions unless the inadvertent omissions would have materially affected the source selection decision. Such identification and assertion shall be submitted to the Contracting Officer as soon as practicable prior to the scheduled data for delivery of the software, in the following format, and signed by an official authorized to contractually obligate the Contractor:

Identification and Assertion of Restrictions on the Government's Use, Release, or Disclosure of Computer Software.

The Contractor asserts for itself, or the persons identified below, that the Government's rights to use, release, or disclose the following computer software should be restricted:

Computer Software to be Furnished With Restrictions*

Basis for Assertion**

Asserted Rights Category***

Name of Person Asserting Restrictions****

(LIST) (LIST) (LIST) (LIST)

*Generally, development at private expense, either exclusively or partially, is the only basis for asserting restriction on the Government's rights to use, release, or disclose computer software.

**Indicate whether development was exclusively or partially at private expense. If development was not a private expense, enter the specific reason for asserting that the Government's right should be restricted.

***Enter asserted rights category (e.g., restricted or government purpose rights in computer software, government purpose license rights from a prior contract, rights in SBIR software generated under another contract, or specifically negotiated licenses).

****Corporation, individual, or other person, as appropriate.

Date ____________________________ Printed Name and Title

Signature ____________________________

(End of identification and assertion)

(4) When requested by the Contracting Officer, the Contractor shall provide sufficient information to enable the Contracting Officer to evaluate the Contractor's assertions. The Contracting Officer reserves the right to add the Contractor's assertions to the Attachment and validate any listed assertion, at a later date, in accordance with the procedures of the Validation of Asserted Restriction--Computer Software clause of this contract.

(f) Marking requirements. The Contractor, and its subcontractors or suppliers, may only assert restrictions on the Government's right to use, modify, reproduce, release, perform, display, or disclose computer software by marking the deliverable software or documentation subject to restriction. Except as provided in paragraph (f)(5) of this clause, only the following legends are authorized under this contract; the government purpose rights legend at paragraph (f)(2) of this clause; the restricted rights legend at paragraph (f)(3) of this clause; or the special license rights legend at paragraph (f)(4) of this clause; and/or a notice of copyright as prescribed under 17 U.S.C. 401 or 402.

(1) General marking instructions. The Contractor, or its subcontractors or suppliers, shall conspicuously and legibly mark the appropriate legend on all computer software that qualify for such markings. The authorized legends shall be placed on the transmitted document or software storage container and each page, or portions thereof, of printed material containing computer software for which restrictions are asserted. Computer software transmitted directly from one computer or computer terminal to another shall contain a notice of asserted restrictions. However, instructions that interfere with or delay the operation of computer software in order to display a restrictive rights legend or other license statement at any time prior to or during use of the computer software, or otherwise cause such interference or delay, shall not be inserted in software that will or might be used in combat or situations that simulate combat conditions, unless the Contracting Officer's written permission to deliver such software has been obtained prior to delivery. Reproductions of computer software or any portions thereof subject to asserted restrictions, shall also reproduce the asserted restrictions.

(2) Government purpose rights markings. Computer software delivered or otherwise furnished to the Government with government purpose rights shall be marked as follows:

GOVERNMENT PURPOSE RIGHTS

Contract No _____________________ Contractor Name _____________________ Contractor Address _____________________

Expiration Date _____________________

The Government's rights to use, modify, reproduce, release, perform, display, or disclose this software are restricted by paragraph (b)(2) of the Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation clause contained in the above identified contract. No restrictions apply after the expiration date shown above. Any reproduction of the software or portions thereof marked with this legend must also reproduce the markings.

(End of Legend)

(3) Restricted rights markings. Software delivered or otherwise furnished to the Government with restricted rights shall be marked with the following legend:

RESTRICTED RIGHTS

Contract No _____________________ Contractor Name _____________________ Contractor Address _____________________

The Government's rights to use, modify, reproduce, release, perform, display, or disclose this software are restricted by paragraph (b)(3) of the Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation clause contained in the above identified contract. Any reproduction of computer software or portions thereof marked with this legend must also reproduce the markings. Any person, other than the Government, who has been provided access to such software must promptly notify the above named Contractor.

(End of legend)

(4) Special license rights markings.

(i) Computer software or computer documentation in which the Government's rights stem from a specifically negotiated license shall be marked with the following legend:

SPECIAL LICENSE RIGHTS

The Government's right to use, modify, reproduce, release, perform, display, or disclose this software are restricted by Contract No.__________ (Insert contract number)_______, License No._____

(Insert license identifier)______. Any reproduction of computer software, computer software documentation, or portions thereof marked with this legend must also reproduce the markings.

(End of legend)

252.227-7015 TECHNICAL DATA--COMMERCIAL ITEMS (FEB 2014)

(IAW DFARS 227.7102-4(a)(1))

252.227-7016 RIGHTS IN BID OR PROPOSAL INFORMATION (JAN 2011)

(IAW DFARS 227.7103-6(e)(1), DFARS 227.7104(e)(1), DFARS 227.7203-6(b))

252.227-7019 VALIDATION OF ASSERTED RESTRICTIONS--COMPUTER SOFTWARE (SEP 2011)

(IAW DFARS 227.7104(e)(3), DFARS 227.7203-6(c))

252.227-7025 LIMITATIONS ON THE USE OR DISCLOSURE OF GOVERNMENT-FURNISHED

INFORMATION MARKED WITH RESTRICTIVE LEGENDS (MAY 2013)

(IAW DFARS 227.7103-6(c), DFARS 227.7104(f)(1), DFARS 227.7203-6(d))

252.227-7027 DEFERRED ORDERING OF TECHNICAL DATA OR COMPUTER SOFTWARE

(APR 1988)

(IAW DFARS 227.7103-8(b))

252.227-7030 TECHNICAL DATA--WITHHOLDING OF PAYMENT (MAR 2000)

(IAW DFARS 227.7103-6(e)(2), DFARS 227.7104(e)(4))

(a) the Contracting Officer may until such data is accepted by the Government, withhold payment to the Contractor of ten percent (10%) of the total contract price or amount

252.227-7037 VALIDATION OF RESTRICTIVE MARKINGS ON TECHNICAL DATA (JUN 2013)

(IAW DFARS 227.7102-4(c), DFARS 227.7103-6(e)(3), DFARS 227.7104(e)(5), DFARS 227.7203-6(f))

52.228-5 INSURANCE--WORK ON A GOVERNMENT INSTALLATION (JAN 1997)

(IAW FAR 28.310)

52.237-2 PROTECTION OF GOVERNMENT BUILDINGS, EQUIPMENT, AND VEGETATION

(APR 1984)

(IAW FAR 37.110(b))

252.242-7005 CONTRACTOR BUSINESS SYSTEMS (FEB 2012)

(IAW DFARS 242.7001)

5352.242-9001 COMMON ACCESS CARDS (CAC) FOR CONTRACTOR PERSONNEL (NOV 2012)

(IAW AFFARS 5342.490-2)

252.246-7001 WARRANTY OF DATA--BASIC (MAR 2014)

(IAW DFARS 246.710(1))

PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

SECTION J

LIST OF ATTACHMENTS

Form Number Description/File Name Date Number of Pages PWS_BoeingESSContract_CY16_Final_3Mar 15.docx

03MAR2015 42

PART IV - REPRESENTATIONS AND INSTRUCTIONS

SECTION L

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS OR RESPONDENTS

52.216-30 TIME-AND-MATERIALS/LABOR HOUR PROPOSAL REQUIREMENTS -

NON-COMMERCIAL ITEM ACQUISITION (FEB 2007)

(IAW FAR 16.601(f)(2))

(a) The Government contemplates award of a Time-and-Materials or Labor-Hour type of contract resulting from this solicitation.

(b) The offeror must specify separate fixed hourly rates in its offer that include wages, overhead, general and administrative expenses, and profit for each category of labor to be performed by—

(1) The offeror;

(2) Each subcontractor; and

(3) Each division, subsidiary, or affiliate of the offeror under a common control.

(c) Unless exempt under paragraph (d) of this provision, the fixed hourly rates for services transferred between divisions, subsidiaries, or affiliates of the offeror under a common control—

(1) Shall not include profit for the transferring organization; but

(2) May include profit for the prime Contractor.

(d) The fixed hourly rates for services that meet the definition of commercial item at 2.101 that are transferred between divisions, subsidiaries, or affiliates of the offeror under a common control may be the established catalog or market rate when it is the established practice of the transferring organization to price interorganizational transfers at other than cost for commercial work of the offeror or any division, subsidiary or affiliate of the offeror under a common control.