FA805121R3010 Attachment 2 Combined LCBA Design Specifications - 20210511.pdf
PDF 3 MB Posted
- Attached to
- Rapid Explosive Hazard Mitigation (REHM) Large Clearance Blade Assembly (L-CBA) Federal contract opportunity
- Solicitation number
- FA805121R3010
About this file
This pre-solicitation notice provides advance information about an upcoming request for proposal from the United States Air Force for the production of Rapid Explosive Hazard Mitigation Large Clearance Blade Assemblies. The Air Force Civil Engineer Center requires these specialized tools to quickly and safely clear unexploded ordnance from airfields to allow repair crews to fix any damage following an enemy attack. The intent is to award a five-year indefinite delivery/indefinite quantity contract with a ceiling of $24 million to procure approximately 100 assemblies built to government specifications and delivered to specified locations. Responses to the anticipated request for proposal are due around 30 July 2021. The North American Industry Classification System code is 333120 and it will be set aside for small businesses with 1,250 employees or fewer. Organizational conflicts of interest may apply based on a firm's prior work supporting requirements development.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA805121R3010 Attachment 5 Subcontractor Consent form.docx | DOCX document | |
| FA805121R3010 Attachment 3 LCBA CLIN Price Sheet.xlsx | XLSX spreadsheet | |
| FA805121R3010 Attachment 4 PPI submission form.docx | DOCX document | |
| FA805121R3010 Attachment 1 LCBA SOW 20 July 2021.docx | DOCX document | |
| Solicitation - FA805121R3010.pdf | ||
| FA805121R3010 - L-CBA SOW - Final (30 June 21).docx | DOCX document | |
| Combined LCBA Design Specifications - 20210511.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Large Clearance Blade Assembly ‐ TDP Item Information Sheet ‐ 20210430
NOTES:
(TOTAL ASSEMBLY QTY)
A D DRAWING NO. NOMENCLATURE REV SIZE
PAGE
QTY
A S/W P H NOMENCLATURE PART NO. VENDOR USED IN CAGE CODE DRAWING NO.
***PAGE
/ ZONE
X CXAE2102‐0000 LARGE CLEARANCE BLADE ASSEMBLY (L‐CBA) 00 D 11 1 LARGE CLEARANCE BLADE ASSEMBLY (L‐CBA) CXAE2102‐0000‐10 FINAL 5YEE5 CXAE2102‐0000
X CXAE2102‐0001 BLADE INTERFACE 00 D 5 2 BLADE INTERFACE CXAE2102‐0001‐10 CXAE2102‐0000‐10 5YEE5 CXAE2102‐0001
X CXAE2102‐0002 BLADE BODY 00 D 2 1 LOADER INTERFACE CXAE2102‐0003‐10 CXAE2102‐0000‐10 5YEE5 CXAE2102‐0003
X CXAE2102‐0003 LOADER INTERFACE 00 D 5 1 RIGHT LOADER INTERFACE CXAE2102‐0003‐20 CXAE2102‐0000‐10 5YEE5 CXAE2102‐0003
X CXAE2102‐0004 CASTER BRACE 00 D 6 1 CASTER BRACE CXAE2102‐0004‐10 CXAE2102‐0000‐10 5YEE5 CXAE2102‐0004
X CXAE2102‐0005 SUPPORT BRACE 00 D 5 3 SUPPORT BRACE CXAE2102‐0005‐10 CXAE2102‐0000‐10 5YEE5 CXAE2102‐0005
X CXAE2102‐0006 SKID SHOE 00 D 2 1 END COLLECTOR CXAE2102‐0007‐10 CXAE2102‐0000‐10 5YEE5 CXAE2102‐0007
X CXAE2102‐0007 END COLLECTOR 00 D 4 1 LEFT END COLLECTOR CXAE2102‐0007‐20 CXAE2102‐0000‐10 5YEE5 CXAE2102‐0007
X CXAE2102‐0008 FRAG PLATE 00 D 2 1 FRONT WEDGE CXAE2102‐0009‐10 CXAE2102‐0000‐10 5YEE5 CXAE2102‐0009
X CXAE2102‐0009 FRONT WEDGE 00 D 8 1 FRONT WEDGE BRACE CXAE2102‐0011‐10 CXAE2102‐0000‐10 5YEE5 CXAE2102‐0011
X CXAE2102‐0010 BOLTING ANGLE 00 D 1 2 ATTACHMENT BEAM CXAE2102‐0001‐01 CXAE2102‐0001‐10 5YEE5 CXAE2102‐0001 3
X CXAE2102‐0011 FRONT WEDGE BRACE 00 D 4 4 C‐STYLE BOLT PLATE CXAE2102‐0001‐03 CXAE2102‐0001‐10 5YEE5 CXAE2102‐0001 4
X CXAE2102‐0012 BRACE HINGE PLATE 00 D 1 4 HOIST PLATE CXAE2102‐0001‐05 CXAE2102‐0001‐10 5YEE5 CXAE2102‐0001 5
X CXAE2102‐0013 IDENTIFICATION PLATE 00 D 1 1 BLADE BODY CXAE2102‐0002‐01 ASTRALLOY CXAE2102‐0000‐10 5YEE5 CXAE2102‐0002 2
2 LOADER INTERFACE PLATE CXAE2102‐0003‐01 CXAE2102‐0003‐10/20 5YEE5 CXAE2102‐0003 3
2 STOP TAB CXAE2102‐0003‐03 CXAE2102‐0003‐10/20 5YEE5 CXAE2102‐0003 5
1 CASTER SUPPORT WEB CXAE2102‐0004‐01 CXAE2102‐0004‐10 5YEE5 CXAE2102‐0004 3
2 COUPLER PLATE CXAE2102‐0004‐03 CXAE2102‐0004‐10 5YEE5 CXAE2102‐0004 4
2 CASTER SUPPORT GUSSET CXAE2102‐0004‐05 CXAE2102‐0004‐10 5YEE5 CXAE2102‐0004 5
2 CASTER BOLTING PLATE CXAE2102‐0004‐07 CXAE2102‐0004‐10 5YEE5 CXAE2102‐0004 6
2 HEAVY DUTY SWIVEL CASTER S‐MD‐104FST HAMILTON CXAE2102‐0004‐10 26935 CXAE2102‐0004
3 BRACE BOLT PATE CXAE2102‐0005‐01 CXAE2102‐0005‐10 5YEE5 CXAE2102‐0005 3
3 BOLT FLANGE CXAE2102‐0005‐03 CXAE2102‐0005‐10 5YEE5 CXAE2102‐0005 4
3 SUPPORT WEB CXAE2102‐0005‐05 CXAE2102‐0005‐10 5YEE5 CXAE2102‐0005 5
4 SKID SHOE CXAE2102‐0006‐01 CXAE2102‐0000‐10 5YEE5 CXAE2102‐0006 2
2 END COLLECTOR PLATE CXAE2102‐0007‐01 CXAE2102‐0007‐10/20 5YEE5 CXAE2102‐0007 3
2 STOP ANGLE CXAE2102‐0007‐03 CXAE2102‐0007‐10/20 5YEE5 CXAE2102‐0007 4
2 FRAG PLATE CXAE2102‐0008‐01 CXAE2102‐0000‐10 5YEE5 CXAE2102‐0008 1
1 WEDGE ‐ REAR TUBE CXAE2102‐0009‐01 CXAE2102‐0009‐10 5YEE5 CXAE2102‐0009 3
2 WEDGE ‐ FRONT TUBE CXAE2102‐0009‐03 CXAE2102‐0009‐10 5YEE5 CXAE2102‐0009 4
1 WEDGE ‐ CENTER TUBE CXAE2102‐0009‐05 CXAE2102‐0009‐10 5YEE5 CXAE2102‐0009 5
2 WEDGE ‐ MEDIUM TUBE CXAE2102‐0009‐07 CXAE2102‐0009‐10 5YEE5 CXAE2102‐0009 6
2 WEDGE ‐ SMALL TUBE CXAE2102‐0009‐11 CXAE2102‐0009‐10 5YEE5 CXAE2102‐0009 7
PROJECT ID: CXAE2102
ORGANIZATION:
CONTRACT NO.
PROJECT ENGINEER: SEAN CLOUD
**QTY ITEM TYPE
DRAWING LIST PARTS LIST
*TYPE: A = ASSEMBLY, D = DETAIL
** QTY ITEM TYPE: A = ASSEMBLY; S/W = SUBASSEMBLY/WELDMENT; P = PART; H = HARDWARE
***PAGE/ZONE: FIRST PART DETAIL LOCATION IN DRAWING NO. REFERENCED. (PROVIDE ZONE IF MULTIPLE PARTS PER PAGE)
*TYPE
DISTRIBUTION D:
Distribution authorized to Department of Defense and U.S. DoD contractors only; Administrative or Operational use; 27 April 2021. Other requests for this document shall be referred to AFCEC/CXA, 139 Barnes Drive, Suite 1, Tyndall AFB, FL 32403
QTY (UNIQUE)/[TOTAL] ASSY: (1)/[1]; SUB&WLD: (9)/[12]; PART: (29)/[70]; HDWR: (11)/[533]
LARGE CLEARANCE BLADE ASSEMBLY (L‐CBA)
AIR FORCE CIVIL ENGINEER CENTER (AFCEC‐CXAE)
GSA GS00Q25OADS439 ID04190090
TECHNICAL DRAWING PACKAGE ‐ ITEM & INFORMATION GUIDE
DATE: 20210430
DOCUMENT IDENTIFIES ALL DRAWINGS AND PARTS FOR THE LARGE CLEARANCE BLADE ASSEMBLY ALONG WITH LOCATIONS AND QUANTITIES TO COMPLETE ONE ASSEMBLY WITH NO SPARE PARTS. USE A 5'X10' SHEET FOR ALL 0.75" AND 2.00" WATER JET COMPONENTS TO FIT ALL PARTS ON ONE SHEET. USE SINGLE 4'X8' SHEET FOR 0.50" WATER JET
COMPONENTS.
SUBMITTED: SEAN CLOUD
APPROVED: BRIAN SKIBBA
DESIGNER: SEAN CLOUD
CHECKER: KEVIN WISE
PROJECT:
5/11/2021 7:23 AM PAGE 1 OF 2
Large Clearance Blade Assembly ‐ TDP Item Information Sheet ‐ 20210430
NOTES:
(TOTAL ASSEMBLY QTY)
A D DRAWING NO. NOMENCLATURE REV SIZE
PAGE
QTY
A S/W P H NOMENCLATURE PART NO. VENDOR USED IN CAGE CODE DRAWING NO.
***PAGE
/ ZONE
PROJECT ID: CXAE2102
ORGANIZATION:
CONTRACT NO.
PROJECT ENGINEER: SEAN CLOUD
**QTY ITEM TYPE
DRAWING LIST PARTS LIST
*TYPE: A = ASSEMBLY, D = DETAIL
** QTY ITEM TYPE: A = ASSEMBLY; S/W = SUBASSEMBLY/WELDMENT; P = PART; H = HARDWARE
***PAGE/ZONE: FIRST PART DETAIL LOCATION IN DRAWING NO. REFERENCED. (PROVIDE ZONE IF MULTIPLE PARTS PER PAGE)
*TYPE
DISTRIBUTION D:
Distribution authorized to Department of Defense and U.S. DoD contractors only; Administrative or Operational use; 27 April 2021. Other requests for this document shall be referred to AFCEC/CXA, 139 Barnes Drive, Suite 1, Tyndall AFB, FL 32403
QTY (UNIQUE)/[TOTAL] ASSY: (1)/[1]; SUB&WLD: (9)/[12]; PART: (29)/[70]; HDWR: (11)/[533]
LARGE CLEARANCE BLADE ASSEMBLY (L‐CBA)
AIR FORCE CIVIL ENGINEER CENTER (AFCEC‐CXAE)
GSA GS00Q25OADS439 ID04190090
TECHNICAL DRAWING PACKAGE ‐ ITEM & INFORMATION GUIDE
DATE: 20210430
DOCUMENT IDENTIFIES ALL DRAWINGS AND PARTS FOR THE LARGE CLEARANCE BLADE ASSEMBLY ALONG WITH LOCATIONS AND QUANTITIES TO COMPLETE ONE ASSEMBLY WITH NO SPARE PARTS. USE A 5'X10' SHEET FOR ALL 0.75" AND 2.00" WATER JET COMPONENTS TO FIT ALL PARTS ON ONE SHEET. USE SINGLE 4'X8' SHEET FOR 0.50" WATER JET
COMPONENTS.
SUBMITTED: SEAN CLOUD
APPROVED: BRIAN SKIBBA
DESIGNER: SEAN CLOUD
CHECKER: KEVIN WISE
PROJECT:
4 HINGE PLATE CXAE2102‐0009‐13 CXAE2102‐0009‐10 5YEE5 CXAE2102‐0009 8
10 BOLT ANGLE CXAE2102‐0010‐01 VARIOUS 5YEE5 CXAE2102‐0010 1
1 FRONT WEDGE BRACE ARM CXAE2102‐0011‐01 CXAE2102‐0011‐10 5YEE5 CXAE2102‐0011 3
1 FRONT WEDGE BRACE BOLT PLATE CXAE2102‐0011‐03 CXAE2102‐0011‐10 5YEE5 CXAE2102‐0011 4
2 BRACE HINGE PLATE CXAE2102‐0012‐01 VARIOUS 5YEE5 CXAE2102‐0012 1
1 IDENTIFICATION PLATE CXAE2102‐0013‐01 CXAE2102‐0000‐10 5YEE5 CXAE2102‐0013 1
42 HEX HEAD SCREW, 7/8‐9 X 6.50 LG, GR8 STL 91257A927 MCMASTER‐CARR CXAE2102‐0000‐10 0KVE6
50 HEX HEAD SCREW, 7/8‐9 X 4.50 LG, GR8 STL 91257A919 MCMASTER‐CARR CXAE2102‐0000‐10 0KVE6
30 HEX HEAD SCREW, 7/8‐9 X 3.00 LG, GR8 STL 91257A913 MCMASTER‐CARR CXAE2102‐0000‐10 0KVE6
244 WASHER, FLAT, 7/8, GR8 STL 9823A037 MCMASTER‐CARR CXAE2102‐0000‐10 0KVE6
122 HEX LOCK NUT, 7/8‐9, GR8 STL 97135A290 MCMASTER‐CARR CXAE2102‐0000‐10 0KVE6
8 HEX HEAD SCREW, 5/8‐11 X 2.75 LG, GR8 STL 91257A805 MCMASTER‐CARR CXAE2102‐0004‐10 0KVE6
16 WASHER, FLAT, 5/8, GR8 STL 98023A035 MCMASTER‐CARR CXAE2102‐0004‐10 0KVE6
8 HEX LOCK NUT, 5/8‐11, GR8 STL 97135A270 MCMASTER‐CARR CXAE2102‐0004‐10 0KVE6
5 LOOP‐GRIP CLEVIS PIN WITH HARPIN COTTER PIN 98412A516 MCMASTER‐CARR CXAE2102‐0000‐10 0KVE6
4 HEX HEAD SCREW, 6‐32 X 0.50 LG, GR8 STL 92620A405 MCMASTER‐CARR CXAE2102‐0013‐01 0KVE6
4 WASHER, FLAT, #6, GR8 STL 98023A112 MCMASTER‐CARR CXAE2102‐0013‐01 0KVE6
5/11/2021 7:23 AM PAGE 2 OF 2
THIS DRAWING IS FOR DEVELOPMENTAL
RELEASE ONLY. THIS DRAWING IS NOT TO BE
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 MAY 2021). OTHER REQUEST FOR THIS DOCUMENT
SHALL BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2,
TYNDALL AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
A
ISOMETRIC VIEWS
FOR REFERENCE ONLY
4X
DETAIL A
SCALE 1 : 1
29 1X
39 1X
40 1X
5.
CAD MAINTAINED. CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY.
NOTES:
INTERPRET DRAWING IAW ASME Y14.100-20171.
REMOVE ALL BURRS AND BREAK SHARP EDGES2.
FINISH: TOUCH UP PAINT AS REQUIRED3.
TORQUE ALL 7/8-9 FASTENERS TO 455 FT-LBS4.
ITEM IDENTIFICATION: IDENTIFY IAW MIL-STD-130. METHOD: RUBBER STAMP WITH 5.
.13 INCH HIGH CHARACTERS USING CONTRASTING COLOR INK (PN AA56032-
IIIWHT OR AA56032-IIIBLK) IAW A-A-56032. LOCATE APPROXIMATELY AS
SHOWN. AT A MINIMUM PART MARK AS FOLLOWS:
5YEE5ASSYCXAE2102-0000-10 REV00
REVISIONS
ZONE REV DESCRIPTION DATE APPROVED
00 DEVELOPMENTAL RELEASE 20210427 B.SKIBBA
DWG NO
C
A
D
C
B
A
CXAE2102-0000
D
8 7 6 5 4 3 2 1
1345678
S.CLOUD
K.WISE
CXAE2102-0000 - Large Clearance Blade Assembly.SLDDRW
CHECKED
SUBMITTED
B.SKIBBA
MATERIAL
NEXT ASSY USED ON
APPLICATION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCE ON ANGLES 1
1 PLACE DECIMALS .1
2 PLACE DECIMALS .03
3 PLACE DECIMALS .010
PREPARED
ENGINEER
FILENAME:
TITLE
20210427
FINAL
20210423
20210423
CXAE2102-00005YEE5
B
SHEET 1 OF 12
REVDRAWING NOCAGE CODESIZE
D
SCALE: 1:16
LARGE CLEARANC BLADE
ASSEMBLY (L-CBA)
S.CLOUDL-CBA
ALL SHEETS SAME REV
THIRD ANGLE PROJECTION
APPROVED
TEMPLATE CREATED BY G.K.H. FOR THE P.I.F. 2014/01/29.
S.CLOUD
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
DRAWING PACKAGE NOTATION INFORMATION:
ITEMS CALLED OUT WITH A X WILL DENOTE ASSEMBLY STEPS AND CAN BE LOCATED 1.
ON THE ISOMETRIC VIEW ON EACH PAGE'S BOTTOM LEFT HAND CORNER.
ITEMS CALLED OUT WITH A X WILL DENOTE INDIVIDUAL COMPONENTS FOR THE 2.
ASSEMBLY AND CAN BE LOCATED ON ALL DETAIL VIEWS ON EACH PAGE.
ITEM/STEP QUANTITIES CAN BE SEEN CAN BE SEEN NEXT TO EACH BUBBLE CALLOUT 3.
PREFIXED WITH AN "X"
HARDWARE ASSEMBLY QUANTITIES PER ASSEMBLY STEP ARE NOTED BY USE OF 4.
BRACKETS AND NOTE. THIS IDENTIFIES THE NUMBER OF HARDWARE PER THE DEFINED
STEP.
NOTATION CALLOUT "NS & FS" INDICATES NEAR SIDE & FAR SIDE STATING THAT DETAIL 5.
WILL BE SAME ON THE OPPOSIDE SIDE OF THE MAIN DETAIL.
DIMENSIONS ENCLOSED IN PARAENTHESIS ARE INDICATING A REFERENCE 6.
DIMENSION.
ITEM OR
FIND NO
QTY
REQD
CAGE
CODE
DRAWING OR
SPECIFICATION NUMBER
PART OR IDENTIFICATION
NUMBER Nomenclature or Description NOTES OR REMARKS
TOP LEVEL - PARTS LIST
12 1 5YEE5 CXAE2102-0011 CXAE2102-0011-10 FRONT WEDGE BRACE
11 1 5YEE5 CXAE2102-0009 CXAE2102-0009-10 FRONT WEDGE
10 2 5YEE5 CXAE2102-0008 CXAE2102-0008-01 FRAG PLATE
9 1 5YEE5 CXAE2102-0007 CXAE2102-0007-20 LEFT END COLLECTOR
8 1 5YEE5 CXAE2102-0007 CXAE2102-0007-10 END COLLECTOR
7 4 5YEE5 CXAE2102-0006 CXAE2102-0006-01 SKID SHOE
6 3 5YEE5 CXAE2102-0005 CXAE2102-0005-10 SUPPORT BRACE
5 1 5YEE5 CXAE2102-0004 CXAE2102-0004-10 CASTER BRACE
4 1 5YEE5 CXAE2102-0003 CXAE2102-0003-20 RIGHT LOADER INTERFACE
3 1 5YEE5 CXAE2102-0003 CXAE2102-0003-10 LOADER INTERFACE
2 1 5YEE5 CXAE2102-0002 CXAE2102-0002-01 BLADE BODY ASTRALLOY
1 2 5YEE5 CXAE2102-0001 CXAE2102-0001-10 BLADE INTERFACE
ITEM OR
FIND NO
QTY
REQD
CAGE
CODE
DRAWING OR
SPECIFICATION NUMBER
PART OR IDENTIFICATION
NUMBER Nomenclature or Description NOTES OR REMARKS
ATOMIC - PARTS LIST
40 4 0KVE6 98023A112 WASHER, FLAT, #6, GR8 STL MCMASTER-CARR
39 4 0KVE6 92620A405 HEX HEAD SCREW, 6-32 X 0.50 LG, GR8 STL MCMASTER-CARR
38 5 0KVE6 98412A516 LOOP-GRIP CLEVIS PIN WITH HAIRPIN COTTER PIN MCMASTER-CARR
37 8 0KVE6 97135A270 HEX LOCK NUT, 5/8-11, GR8 STL MCMASTER-CARR
36 16 0KVE6 98023A035 WASHER, FLAT, 5/8, GR8 STL MCMASTER-CARR
31 8 0KVE6 91257A805 HEX HEAD SCREW, 5/8-11 X 2.75 LG, GR8 STL MCMASTER-CARR
34 122 0KVE6 97135A290 HEX LOCK NUT, 7/8-9, GR8 STL MCMASTER-CARR
33 244 0KVE6 98023A037 WASHER, FLAT, 7/8, GR8 STL MCMASTER-CARR
32 30 0KVE6 91257A913 HEX HEAD SCREW, 7/8-9 X 3.00 LG, GR8 STL MCMASTER-CARR
31 50 0KVE6 91257A919 HEX HEAD SCREW, 7/8-9 X 4.50 LG, GR8 STL MCMASTER-CARR
30 42 0KVE6 91257A927 HEX HEAD SCREW, 7/8-9 X 6.50 LG, GR8 STL MCMASTER-CARR
29 1 5YEE5 CXAE2102-0013 CXAE2102-0013-01 IDENTIFICATION PLATE
28 2 5YEE5 CXAE2102-0012 CXAE2102-0012-01 BRACE HINGE PLATE
27 1 5YEE5 CXAE2102-0011 CXAE2102-0011-03 FRONT WEDGE BRACE BOLT PLATE
26 1 5YEE5 CXAE2102-0011 CXAE2102-0011-01 FRONT WEDGE BRACE ARM
25 10 5YEE5 CXAE2102-0010 CXAE2102-0010-01 BOLT ANGLE
24 4 5YEE5 CXAE2102-0009 CXAE2102-0009-13 HINGE PLATE
23 2 5YEE5 CXAE2102-0009 CXAE2102-0009-11 WEDGE - SMALL TUBE
22 2 5YEE5 CXAE2102-0009 CXAE2102-0009-07 WEDGE - MEDIUM TUBE
21 1 5YEE5 CXAE2102-0009 CXAE2102-0009-05 WEDGE - CENTER TUBE
20 2 5YEE5 CXAE2102-0009 CXAE2102-0009-03 WEDGE - FRONT TUBE
19 1 5YEE5 CXAE2102-0009 CXAE2102-0009-01 WEDGE - REAR TUBE
18 2 5YEE5 CXAE2102-0008 CXAE2102-0008-01 FRAG PLATE
17 2 5YEE5 CXAE2102-0007 CXAE2102-0007-03 STOP ANGLE
16 2 5YEE5 CXAE2102-0007 CXAE2102-0007-01 END COLLECTOR PLATE
15 4 5YEE5 CXAE2102-0006 CXAE2102-0006-01 SKID SHOE
14 3 5YEE5 CXAE2102-0005 CXAE2102-0005-05 SUPPORT WEB
13 3 5YEE5 CXAE2102-0005 CXAE2102-0005-03 BOLT FLANGE
12 3 5YEE5 CXAE2102-0005 CXAE2102-0005-01 BRACE BOLT PLATE
11 2 26935 CXAE2102-0004 S-MD-104FST HEAVY DUTY SWIVEL CASTER HAMILTON
10 2 5YEE5 CXAE2102-0004 CXAE2102-0004-07 CASTER BOLTING PLATE
9 2 5YEE5 CXAE2102-0004 CXAE2102-0004-05 CASTER SUPPORT GUSSET
8 2 5YEE5 CXAE2102-0004 CXAE2102-0004-03 COUPLER PLATE
7 1 5YEE5 CXAE2102-0004 CXAE2102-0004-01 CASTER SUPPORT WEB
6 2 5YEE5 CXAE2102-0003 CXAE2102-0003-03 STOP TAB
5 2 5YEE5 CXAE2102-0003 CXAE2102-0003-01 LOADER INTERFACE PLATE
4 1 5YEE5 CXAE2102-0002 CXAE2102-0002-01 BLADE BODY ASTRALLOY
3 4 5YEE5 CXAE2102-0001 CXAE2102-0001-05 HOIST PLATE
2 4 5YEE5 CXAE2102-0001 CXAE2102-0001-03 C-STYLE BOLT PLATE
1 2 5YEE5 CXAE2102-0001 CXAE2102-0001-01 ATTACHMENT BEAM
DWG NO
C
A
D
C
B
A
CXAE2102-0000
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00005YEE5
B
SHEET 2 OF 12
REVDRAWING NOCAGE CODESIZE
D
SCALE: 1:16
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
7.86
2 2X
25 3X
1 2X
ISOMETRIC VIEW
FOR REFERENCE ONLY
112.00
1 1X
311X
332X
341X
9X
9.00
8.00
R3.00
3 2X
DWG NO
C
A
D
C
B
A
CXAE2102-0000
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00005YEE5
B
SHEET 3 OF 12
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
192.00
36.00 14.00
13.75
4 1X
30 1X
33 2X
34 1X
ISOMETRIC VIEW
FOR REFERENCE ONLY
12X
DWG NO
C
A
D
C
B
A
CXAE2102-0000
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00005YEE5
B
SHEET 4 OF 12
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
B
B
ISOMETRIC VIEW
FOR REFERENCE ONLY
41.00
37.00
75.50
62X
5 2X
SECTION B-B
SCALE 1 : 10
31 1X
33 2X
34 1X
12X NS & FS
DWG NO
C
A
D
C
B
A
CXAE2102-0000
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00005YEE5
B
SHEET 5 OF 12
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
36.50
10.00
23.28 39.66
40.48 D
C
ISOMETRIC VIEW
FOR REFERENCE ONLY
5 DETAIL C
SCALE 1 : 4112X
7 1X
92X
102X
82X
31 1X
36 2X
37 1X
DETAIL D
SCALE 1 : 4
31 1X
33 2X
34 1X
8X
4X NS & FS
DWG NO
C
A
D
C
B
A
CXAE2102-0000
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00005YEE5
B
SHEET 6 OF 12
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
ISOMETRIC VIEW
FOR REFERENCE ONLY
63X
2X 48.00
25.75
22.00
F 61.20
R1.50
E
22.25
DETAIL E
SCALE 1 : 4
13 3X
14 3X
12 3X
DETAIL F
SCALE 1 : 4
301X
332X
341X
12X
CLEARANCE HOLES FOR
BOLTS FROM STEP 2 WHEN
1 AND 2 WERE JOINED
DWG NO
C
A
D
C
B
A
CXAE2102-0000
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00005YEE5
B
SHEET 7 OF 12
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
ISOMETRIC VIEW
FOR REFERENCE ONLY
74X
H
G
DETAIL G
SCALE 1 : 2
15 4X
4REF
14 REF
11REF
48.00
DETAIL H
SCALE 1 : 4301X
332X
341X
12X
DWG NO
C
A
D
C
B
A
CXAE2102-0000
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00005YEE5
B
SHEET 8 OF 12
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
ISOMETRIC VIEW
FOR REFERENCE ONLY
I
I
J
J
SECTION I-I
SCALE 1 : 4
162X
172X
25 4X
4 REF
321X
332X
341X
301X
332X
341X
34.90
34.80
SECTION J-J
SCALE 1 : 4
32 1X
33 2X
34 1X
30 1X
33 2X
34 1X
9X
2X
2X
9X
DWG NO
C
A
D
C
B
A
CXAE2102-0000
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00005YEE5
B
SHEET 9 OF 12
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
54.67
R1.50
41.62
K
K
16REF
ISOMETRIC VIEW
FOR REFERENCE ONLY
102X
96.00
20.00
L
VIEW K-K
60°
SCALE 1 : 10
182X
20.00
.75 GAP
DETAIL L
SCALE 1 : 4
16REF
4 REF
32 1X
33 2X
34 1X 16X
DWG NO
C
A
D
C
B
A
CXAE2102-0000
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00005YEE5
B
SHEET 10 OF 12
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
71.95
41.62
6.02
M
ISOMETRIC VIEW
FOR REFERENCE ONLY
196.73
6.82
37.00
192.00
18.58
98.00 20 2X 22 2X
21 1X
19 1X 232X
DETAIL M
SCALE 1 : 2
244X
385X
DWG NO
C
A
D
C
B
A
CXAE2102-0000
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00005YEE5
B
SHEET 11 OF 12
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
41.62
71.95
N
196.73
O
DETAIL N
SCALE 1 : 5
4 REF
16 REF
20REF
DETAIL O
SCALE 1 : 2
4 REF 30 1X
33 2X
34 1X
2X
2X
DWG NO
C
A
D
C
B
A
CXAE2102-0000
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00005YEE5
B
SHEET 12 OF 12
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
ISOMETRIC VIEW
FOR REFERENCE ONLY
5 9X
6 18X
7 9X
5.
CAD MAINTAINED. CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY.
NOTES:
INTERPRET DRAWING IAW ASME Y14.100-20171.
REMOVE ALL BURRS AND BREAK SHARP EDGES2.
MATERIAL: 3.
2.00 THICK STEEL PLATE IAW ASTM A514A.
0.75 THICK STEEL PLATE IAW ASTM A514B.
FINISH: NONE4.
TORQUE NOTED FASTENERS TO VALUES INDICATED IN TABLE 1 USING MIL-HDBK-5.
60 AS A GUIDE.
FINISH: APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION IAW 6.
MIL-DTL-53072.
CLEAN IAW TT-C-490. METHOD OPTIONAL A.
PRE-TREAT WITH WASH PRIMER IAW DOD-P-15328 B.
COAT WITH EPOXY PRIMER IAW MIL-DTL-53022 TYPE IVC.
TOP COAT WITH POLYURETHANE COATING MEETING REQUIREMENTS OF D.
MIL-DTL-53039 OR MIL-DTL-64159. COLOR PER CONTRACT
TEMPORARY PART MARK IAW MIL-STD-130, METHOD OPTIONAL. MAINTAIN PART 7.
NUMBER IDENTIFICATION THROUGHOUT ASSEMBLY PROCESS PRIOR TO PART
MARKING OF HIGHER LEVEL ASSEMBLY. AT A MINIMUM, TEMPORARY PART MARK
AS FOLLOWS:
5YEE5-ASSYCXAE2102-0001-X (X DENOTED DASH NUMBER) REV00
ITEM IDENTIFICATION: IDENTIFY IAW MIL-STD-130. METHOD: RUBBER STAMP WITH 8.
.13 INCH HIGH CHARACTERS USING CONTRASTING COLOR INK (PN AA56032-
IIIWHT OR AA56032-IIIBLK) IAW A-A-56032. LOCATE APPROXIMATELY AS
SHOWN. AT A MINIMUM PART MARK AS FOLLOWS:
5YEE5ASSYCXAE2102-0001-10 REV00
REVISIONS
ZONE REV DESCRIPTION DATE APPROVED
00 DEVELOPMENTAL RELEASE 20210427 B.SKIBBA
TABLE 1
FIND # TORQUE THREAD
5 455 FT-LBS 7/8-9
ITEM OR
FIND NO
QTY
REQD
CAGE
CODE
DRAWING OR
SPECIFICATION NUMBER
PART OR IDENTIFICATION
NUMBER Nomenclature or Description NOTES OR REMARKS
PARTS LIST
7 9 0KVE6 97135A290 HEX LOCK NUT, 7/8-9, GR8 STL MCMASTER-CARR
6 18 0KVE6 98023A037 WASHER, FLAT, 7/8, GR8 STL MCMASTER-CARR
5 9 0KVE6 91257A919 HEX HEAD SCREW, 7/8-9 X 4.50 LG, GR8 STL MCMASTER-CARR
4 3 5YEE5 CXAE2102-0010 CXAE2102-0010-01 BOLT ANGLE
3 2 5YEE5 CXAE2102-0001 CXAE2102-0001-05 HOIST PLATE
2 2 5YEE5 CXAE2102-0001 CXAE2102-0001-03 C-STYLE BOLT PLATE
1 1 5YEE5 CXAE2102-0001 CXAE2102-0001-01 ATTACHMENT BEAM
DWG NO
C
A
D
C
B
A
CXAE2102-0001
D
8 7 6 5 4 3 2 1
1345678
S.CLOUD
K.WISE
CXAE2102-0001 - Blade Interface.SLDDRW
CHECKED
SUBMITTED
B.SKIBBA
MATERIAL
NEXT ASSY USED ON
APPLICATION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCE ON ANGLES 1
1 PLACE DECIMALS .1
2 PLACE DECIMALS .03
3 PLACE DECIMALS .010
PREPARED
ENGINEER
FILENAME:
TITLE
20210427
CXAE2102-0000-10
20210423
20210423
CXAE2102-00015YEE5
B
SHEET 1 OF 5
REVDRAWING NOCAGE CODESIZE
D
SCALE: 1:8
BLADE INTERFACE
S.CLOUDL-CBA
ALL SHEETS SAME REV
THIRD ANGLE PROJECTION
APPROVED
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
16.00 16.00 32.00 A
A
B
B
4 3X
6.
ISOMETRIC VIEW
FOR REFERENCE ONLY
9.00
8.00
R3.00
112.00
8.
SECTION A-A
SCALE 1 : 3
2 2X
SECTION B-B
SCALE 1 : 3
3 2X
SLIDE COMPONENTS INTO
GROOVE FOR ASSEMBLY
DWG NO
C
A
D
C
B
A
CXAE2102-0001
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00015YEE5
B
SHEET 2 OF 5
REVDRAWING NOCAGE CODESIZE
D
SCALE: 1:8
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
112.00
S
YM
.5
9.
0.
6.
3.
C
D E
-01
SCALE 1 : 4
2.00
ISOMETRIC VIEW
FOR REFERENCE ONLY
3X 1.03 THRU ALL 4.50 4.50
1.50
2.50
DETAIL C
SCALE 1 : 3
3X
2.06
3.03
3.03
.81
2X 45°
2X R2.00 9.00
2X .97
DETAIL D
SCALE 1 : 3
2X
2.06
1.03
DETAIL E
SCALE 1 : 2
2X
3A. 4. 7.
RADIUS CONDITIONS:
UNLESS OTHERWISE SPECIFIED ALL CORNERS WILL HAVE 0.25 RADIUS1.
ALL SLOT ROOT FILLETS WILL BE 0.03 RADIUS2.
DWG NO
C
A
D
C
B
A
CXAE2102-0001
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00015YEE5
B
SHEET 3 OF 5
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
6X 1.03 THRU ALL
6.03
SYM 0
1.03
2.50
4.00
X
1.
.9
X
4.
7.
9.
-03
.75
8.00
ISOMETRIC VIEW
FOR REFERENCE ONLY
3B. 4. 7.
RADIUS CONDITIONS:
UNLESS OTHERWISE SPECIFIED ALL CORNERS WILL HAVE 0.25 RADIUS1.
ALL SLOT ROOT FILLETS WILL BE 0.03 RADIUS2.
DWG NO
C
A
D
C
B
A
CXAE2102-0001
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00015YEE5
B
SHEET 4 OF 5
REVDRAWING NOCAGE CODESIZE
D
SCALE: 1:1
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
1.97
4.00
R3.00
3.00
2X 3.03
7.00
3.00
2.06
2.00
10.00
2X .25 X 45°
ISOMETRIC VIEW
FOR REFERENCE ONLY
-05
3A. 4. 7. RADIUS CONDITIONS:
UNLESS OTHERWISE SPECIFIED ALL CORNERS WILL HAVE 0.25 RADIUS1.
ALL SLOT ROOT FILLETS WILL BE 0.03 RADIUS2.
DWG NO
C
A
D
C
B
A
CXAE2102-0001
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00015YEE5
B
SHEET 5 OF 5
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
ISOMETRIC VIEW
FOR REFERENCE ONLY
CAD MAINTAINED. CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY.
NOTES:
INTERPRET DRAWING IAW ASME Y14.100-20171.
REMOVE ALL BURRS AND BREAK SHARP EDGES2.
MATERIAL: ASTRALLOY V3.
FINISH: APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION IAW 4.
MIL-DTL-53072.
CLEAN IAW TT-C-490. METHOD OPTIONAL. A.
PRE-TREAT WITH WASH PRIMER IAW DOD-P-15328. B.
COAT WITH EPOXY PRIMER IAW MIL-DTL-53022 TYPE IV.C.
TOP COAT WITH POLYURETHANE COATING MEETING REQUIREMENTS OF D.
MIL-DTL-53039 OR MIL-DTL-64159. COLOR PER CONTRACT
ITEM IDENTIFICATION: IDENTIFY IAW MIL-STD-130. METHOD: RUBBER STAMP WITH 5.
.13 INCH HIGH CHARACTERS USING CONTRASTING COLOR INK (PN AA56032-
IIIWHT OR AA56032-IIIBLK) IAW A-A-56032. LOCATE APPROXIMATELY AS
SHOWN. AT A MINIMUM PART MARK AS FOLLOWS:
5YEE5ASSYCXAE2102-0002-01 REV00
REVISIONS
ZONE REV DESCRIPTION DATE APPROVED
00 DEVELOPMENTAL RELEASE 20210427 B.SKIBBA
DWG NO
C
A
D
C
B
A
CXAE2102-0002
D
8 7 6 5 4 3 2 1
1345678
S.CLOUD
K.WISE
CXAE2102-0002 - Blade Body.SLDDRW
CHECKED
SUBMITTED
B.SKIBBA
MATERIAL
NEXT ASSY USED ON
APPLICATION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCE ON ANGLES 1
1 PLACE DECIMALS .1
2 PLACE DECIMALS .03
3 PLACE DECIMALS .010
PREPARED
ENGINEER
FILENAME:
TITLE
20210427
CXAE2102-0000-10
20210423
20210423
CXAE2102-00025YEE5
B
SHEET 1 OF 2
REVDRAWING NOCAGE CODESIZE
D
SCALE: 1:16
BLADE BODY
S.CLOUDL-CBA
ALL SHEETS SAME REV
THIRD ANGLE PROJECTION
APPROVED
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
4.00
192.00
36.00
56X 1.03 THRU ALL
S
YM
.5
.5
8.
5.
0.
7.
2.
SYM 0
1.50
15.50 18.00
11.50
5.
SCALE 1 : 8
ISOMETRIC VIEW
FOR REFERENCE ONLY
BLADE'S HOLE DIMENSIONS ARE SYMMETRIC ACROSS VERTICAL AND HORIZONTAL CENTERLINE
DWG NO
C
A
D
C
B
A
CXAE2102-0002
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00025YEE5
B
SHEET 2 OF 2
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
-10
-20
ISOMETRIC VIEW
FOR REFERENCE ONLY
CAD MAINTAINED. CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY.
NOTES:
INTERPRET DRAWING IAW ASME Y14.100-20171.
REMOVE ALL BURRS AND BREAK SHARP EDGES2.
MATERIAL: 3.
2.00 THICK STEEL PLATE IAW ASTM A514A.
0.75 THICK STEEL PLATE IAW ASTM A514 B.
WELD IAW AWS D1.1/D1.1M4.
FINISH: NONE5.
FINISH: APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION IAW 6.
MIL-DTL-53072.
CLEAN IAW TT-C-490. METHOD OPTIONAL. A.
PRE-TREAT WITH WASH PRIMER IAW DOD-P-15328. B.
COAT WITH EPOXY PRIMER IAW MIL-DTL-53022 TYPE IV.C.
TOP COAT WITH POLYURETHANE COATING MEETING REQUIREMENTS OF D.
MIL-DTL-53039 OR MIL-DTL-64159. COLOR PER CONTRACT
TEMPORARY PART MARK IAW MIL-STD-130, METHOD OPTIONAL. MAINTAIN PART 7.
NUMBER IDENTIFICATION THROUGHOUT ASSEMBLY PROCESS PRIOR TO PART
MARKING OF HIGHER LEVEL ASSEMBLY. AT A MINIMUM, TEMPORARY PART MARK
AS FOLLOWS:
5YEE5-CXAE2102-0003-X (X DENOTED DASH NUMBER) REV00
ITEM IDENTIFICATION: IDENTIFY IAW MIL-STD-130. METHOD: RUBBER STAMP WITH 8.
IIIWHT OR AA56032-IIIBLK) IAW A-A-56032. LOCATE APPROXIMATELY AS
SHOWN. AT A MINIMUM PART MARK AS FOLLOWS:
5YEE5ASSYCXAE2102-0003-10 REV00
REVISIONS
ZONE REV DESCRIPTION DATE APPROVED
00 DEVELOPMENTAL RELEASE 20210427 B.SKIBBA
ITEM OR
FIND NO
QTY
REQD
CAGE
CODE
DRAWING OR
SPECIFICATION NUMBER
PART OR IDENTIFICATION
NUMBER Nomenclature or Description NOTES OR REMARKS
PARTS LIST
2 1 5YEE5 CXAE2102-0003 CXAE2102-0003-03 STOP TAB
1 1 5YEE5 CXAE2102-0003 CXAE2102-0003-01 LOADER INTERFACE PLATE
DWG NO
C
A
D
C
B
A
CXAE2102-0003
D
8 7 6 5 4 3 2 1
1345678
S.CLOUD
K.WISE
CXAE2102-0003 - Loader Interface.SLDDRW
CHECKED
SUBMITTED
B.SKIBBA
MATERIAL
NEXT ASSY USED ON
APPLICATION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCE ON ANGLES 1
1 PLACE DECIMALS .1
2 PLACE DECIMALS .03
3 PLACE DECIMALS .010
PREPARED
ENGINEER
FILENAME:
TITLE
20210427
CXAE2102-0000-10
20210423
20210423
CXAE2102-00035YEE5
B
SHEET 1 OF 5
REVDRAWING NOCAGE CODESIZE
D
SCALE: 1:4
LOADER INTERFACE
S.CLOUDL-CBA
ALL SHEETS SAME REV
THIRD ANGLE PROJECTION
APPROVED
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
34.41
A
-10 SHOWN -20 OPPOSITE
6.
32.68
4.00
ISOMETRIC VIEW
FOR REFERENCE ONLY
3.50
DETAIL A
SCALE 1 : 2
0.25
DWG NO
C
A
D
C
B
A
CXAE2102-0003
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00035YEE5
B
SHEET 2 OF 5
REVDRAWING NOCAGE CODESIZE
D
SCALE: 1:4
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
24.18 4.00
16.00
30°
12.68
.75
2.38
14.75
4.00
2.75 START POINT
3.32
24.00
B
C
D
ISOMETRIC VIEW
FOR REFERENCE ONLY
2.00
32.68
2X 0.13 X 45
R3.32
R1.24
R1.67
1.87
.38
34°
2°
R5.40
1.11
3.13
DETAIL B
SCALE 1 : 2
2.07
.81
3.56
1.97
3°
2.37
4X R .03
DETAIL C
SCALE 1 : 2
2X 1.50
2X 3.00
2X 3.00
1.50
2.06
2.97
5.00
6.03
DETAIL D
SCALE 1 : 2
2X
-01
3A. 5. 7.
DWG NO
C
A
D
C
B
A
CXAE2102-0003
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00035YEE5
B
SHEET 3 OF 5
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
12.00
10.50
5.50
2.25
10.75
1.50
16.00
3.13
3.32
24.18
2.75 START POINT
30°
24.00
10.75
19.53
2.53
24.00
R12.00
R4.00 3.50
R2.19
R1.40
16X 1.03 THRU ALL
2X 0.25 X 45
RADIUS CONDITIONS:
UNLESS OTHERWISE SPECIFIED ALL CORNERS WILL HAVE 0.25 RADIUS1.
ALL SLOT ROOT FILLETS WILL BE 0.03 RADIUS2.
DWG NO
C
A
D
C
B
A
CXAE2102-0003
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00035YEE5
B
SHEET 4 OF 5
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
4.00
2X 2.00
2X R .03
3.50
4.00
.75
ISOMETRIC VIEW
FOR REFERENCE ONLY
-03
3B. 5. 7.
RADIUS CONDITIONS:
UNLESS OTHERWISE SPECIFIED ALL CORNERS WILL HAVE 0.13 RADIUS1.
DWG NO
C
A
D
C
B
A
CXAE2102-0003
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00035YEE5
B
SHEET 5 OF 5
REVDRAWING NOCAGE CODESIZE
D
SCALE: 2:1
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
68X
716X
88X
6.
CAD MAINTAINED. CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY.
NOTES:
INTERPRET DRAWING IAW ASME Y14.100-20171.
REMOVE ALL BURRS AND BREAK SHARP EDGES2.
MATERIAL: 0.75 THICK STEEL PLATE IAW ASTM A514 3.
WELD IAW AWS D1.1/D1.1M4.
FINISH: NONE5.
TORQUE: NOTED FASTERNERS TO VALUES INDICATED IN TABLE 1 USING MIL-6.
HDBK-60 AS A GUIDE.
PRIOR TO INSTALLING FN 6 THRU 8. FINISH: APPLICATION PROCEDURES AND 7.
QUALITY CONTROL INSPECTION IAW MIL-DTL-53072.
CLEAN IAW TT-C-490. METHOD OPTIONAL. A.
PRE-TREAT WITH WASH PRIMER IAW DOD-P-15328. B.
COAT WITH EPOXY PRIMER IAW MIL-DTL-53022 TYPE IV.C.
TOP COAT WITH POLYURETHANE COATING MEETING REQUIREMENTS OF D.
MIL-DTL-53039 OR MIL-DTL-64159. COLOR PER CONTRACT
TEMPORARY PART MARK IAW MIL-STD-130, METHOD OPTIONAL. MAINTAIN PART 8.
NUMBER IDENTIFICATION THROUGHOUT ASSEMBLY PROCESS PRIOR TO PART
MARKING OF HIGHER LEVEL ASSEMBLY. AT A MINIMUM, TEMPORARY PART MARK
5YEE5-CXAE2102-0004-X (X DENOTED DASH NUMBER) REV00
ITEM IDENTIFICATION: IDENTIFY IAW MIL-STD-130. METHOD: RUBBER STAMP WITH 9.
IIIWHT OR AA56032-IIIBLK) IAW A-A-56032. LOCATE APPROXIMATELY AS
SHOWN. AT A MINIMUM PART MARK AS FOLLOWS:
5YEE5ASSYCXAE2102-0004-10 REV00
REVISIONS
ZONE REV DESCRIPTION DATE APPROVED
00 DEVELOPMENTAL RELEASE 20210427 B.SKIBBA
TABLE 1
FIND # TORQUE THREAD
6 159 FT-LBS 5/8-11
ITEM OR
FIND NO
QTY
REQD
CAGE
CODE
DRAWING OR
SPECIFICATION NUMBER
PART OR IDENTIFICATION
NUMBER Nomenclature or Description NOTES OR REMARKS
PARTS LIST
8 8 0KVE6 97135A270 HEX LOCK NUT, 5/8-11, GR8 STL MCMASTER-CARR
7 16 0KVE6 98023A035 WASHER, FLAT, 5/8, GR8 STL MCMASTER-CARR
6 8 0KVE6 91257A805 HEX HEAD SCREW, 5/8-11 X 2.75 LG, GR8 STL MCMASTER-CARR
5 2 26935 CXAE2102-0004 S-MD-104FST HEAVY DUTY SWIVEL CASTER HAMILTON
4 2 5YEE5 CXAE2102-0004 CXAE2102-0004-07 CASTER BOLTING PLATE
3 2 5YEE5 CXAE2102-0004 CXAE2102-0004-05 CASTER SUPPORT GUSSET
2 2 5YEE5 CXAE2102-0004 CXAE2102-0004-03 COUPLER PLATE
1 1 5YEE5 CXAE2102-0004 CXAE2102-0004-01 CASTER SUPPORT WEB
DWG NO
C
A
D
C
B
A
CXAE2102-0004
D
8 7 6 5 4 3 2 1
1345678
S.CLOUD
K.WISE
CXAE2102-0004 - Caster Brace.SLDDRW
CHECKED
SUBMITTED
B.SKIBBA
MATERIAL
NEXT ASSY USED ON
APPLICATION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCE ON ANGLES 1
1 PLACE DECIMALS .1
2 PLACE DECIMALS .03
3 PLACE DECIMALS .010
PREPARED
ENGINEER
FILENAME:
TITLE
20210427
CXAE2102-0000-10
20210423
20210423
CXAE2102-00045YEE5
B
SHEET 1 OF 6
REVDRAWING NOCAGE CODESIZE
D
SCALE: 1:4
CASTER BRACE
S.CLOUDL-CBA
ALL SHEETS SAME REV
THIRD ANGLE PROJECTION
APPROVED
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
37.00
14.00
23.00
A
A
B
B
9.
ISOMETRIC VIEW
FOR REFERENCE ONLY
9.00
2X 1.75
0.25 TYP
SECTION A-A
0.25TYP
8.00
24.75
10.00 6.00
SECTION B-B
0.25TYP
7.
DWG NO
C
A
D
C
B
A
CXAE2102-0004
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00045YEE5
B
SHEET 2 OF 6
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
36.50
35.50
6.00
2X 3.50
6.25 23.00
5.00
2X 3.50
2X 6.00
4X 45°
8X R 2.00
20.50
12.50
D
C
16.00
.75
2X 0.25 X 45
NS & FS
ISOMETRIC VIEW
FOR REFERENCE ONLY
3.50
4X 2.00
5.00
2X .50
4X R .03
4X R .13
DETAIL D
SCALE 2 : 3
2X
2.03
.81
DETAIL C
SCALE 1 : 1
2X
15.88
7.63
E
3.75
1.75
4X .11 .50
TAP SIZE 6-32 THREAD
DETAIL E
SCALE 1 : 2
-01
3. 5. 8.
RADIUS CONDITIONS:
UNLESS OTHERWISE SPECIFIED ALL CORNERS WILL HAVE 0.25 RADIUS1.
ALL SLOT ROOT FILLETS WILL BE 0.03 RADIUS2.
DWG NO
C
A
D
C
B
A
CXAE2102-0004
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00045YEE5
B
SHEET 3 OF 6
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
8.00
1.50 5.00
1.50
12.00
4X 1.03 THRU ALL
4.50
7.00
2.50
F
-03
3. 5. 8.
.75
16.00
ISOMETRIC VIEW
FOR REFERENCE ONLY
2.06
.81
DETAIL F
SCALE 1 : 1
2X
SLOT HOLE
RADIUS CONDITIONS:
UNLESS OTHERWISE SPECIFIED ALL CORNERS WILL HAVE 0.50 RADIUS1.
ALL SLOT HOLE CORNERS WILL BE 0.03 RADIUS2.
DWG NO
C
A
D
C
B
A
CXAE2102-0004
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00045YEE5
B
SHEET 4 OF 6
REVDRAWING NOCAGE CODESIZE
D
SCALE: 1:2
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
1.00 2.00
4.00
4.00
.81
2.03
6X R .03
8.00
.50
2X .50
2X .47
-05
3. 5. 8.
4.50
.75
ISOMETRIC VIEW
FOR REFERENCE ONLY
RADIUS CONDITIONS:
UNLESS OTHERWISE SPECIFIED ALL CORNERS WILL HAVE 0.13 RADIUS1.
ALL SLOT ROOT FILLETS WILL BE 0.03 RADIUS2.
DWG NO
C
A
D
C
B
A
CXAE2102-0004
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00045YEE5
B
SHEET 5 OF 6
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
1.00 7.00
1.00
7.00
4X .69 THRU ALL
9.00
2.50
4.00
3.50
G
-07
3. 5. 8.
.75
9.00
ISOMETRIC VIEW
FOR REFERENCE ONLY
2.06
.81
DETAIL G
SCALE 2 : 1
2X
SLOT HOLE
RADIUS CONDITIONS:
UNLESS OTHERWISE SPECIFIED ALL CORNERS WILL HAVE 0.50 RADIUS1.
ALL SLOT HOLE CORNERS WILL BE 0.03 RADIUS2.
DWG NO
C
A
D
C
B
A
CXAE2102-0004
D
8 7 6 5 4 3 2 1
1345678
CXAE2102-00045YEE5
B
SHEET 6 OF 6
REVDRAWING NOCAGE CODESIZE
D
CONSIDERED AS A FINAL PRODUCT.
DEVELOPMENTAL DISTRIBUTION D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF
DEFENSE AND US DOD CONTRACTORS ONLY - (ADMINISTRATIVE AND
OPERATIONAL)(27 APRIL 2021). REQUEST FOR THIS DOCUMENT SHALL
BE REFERRED TO AFCEC-CXAE,139 BARNES DRIVE, SUITE 2, TYNDALL
AFB 32403.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS
RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751,
ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, (TITLE 50, U.S.C.,
AOO. 2401 ET SEQ), AS AMENDED. VIOLATIONS OF THESES EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
ISOMETRIC VIEW
FOR REFERENCE ONLY
CAD MAINTAINED. CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY.
NOTES:
INTERPRET DRAWING IAW ASME Y14.100-20171.
REMOVE ALL BURRS AND BREAK SHARP EDGES2.
MATERIAL: 0.75 THICK STEEL PLATE IAW ASTM A5143.
WELD IAW AWS D1.1/D1.1M4.
FINISH: NONE5.
FINISH: APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION IAW 6.
MIL-DTL-53072.
CLEAN IAW TT-C-490. METHOD OPTIONAL. A.
PRE-TREAT WITH WASH PRIMER IAW DOD-P-15328. B.
COAT WITH EPOXY PRIMER IAW MIL-DTL-53022 TYPE IV.C.
TOP COAT WITH POLYURETHANE COATING MEETING REQUIREMENTS OF D.
MIL-DTL-53039 OR MIL-DTL-64159. COLOR PER CONTRACT
TEMPORARY PART MARK IAW MIL-STD-130, METHOD OPTIONAL. MAINTAIN PART 7.
NUMBER IDENTIFICATION THROUGHOUT ASSEMBLY PROCESS PRIOR TO PART
MARKING OF HIGHER LEVEL ASSEMBLY. AT A MINIMUM, TEMPORARY PART MARK
5YEE5-CXAE2102-0005-X (X DENOTED DASH NUMBER) REV00
IIIWHT OR AA56032-IIIBLK) IAW A-A-56032. LOCATE APPROXIMATELY AS
SHOWN. AT A MINIMUM PART MARK AS FOLLOWS:
5YEE5ASSYCXAE2102-0005-10 REV00
REVISIONS
ZONE REV DESCRIPTION DATE APPROVED
00 DEVELOPMENTAL RELEASE 20210428 B.SKIBBA
ITEM OR
FIND NO
QTY
REQD
CAGE
CODE
DRAWING OR
SPECIFICATION NUMBER
PAR…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .