Questions and Answers - FA700025Q0082.pdf

122 KB Posted

Attached to
USAFA - Wire EDM Drill
Solicitation number
FA700025Q0082
Issued by

About this file

Written by GovTribe AI ·

This document is a Questions and Answers (Q&A) file for RFQ FA700025Q0082 regarding a USAFA Wire EDM Drill procurement. The Q&A addresses two specific technical clarifications from potential vendors: 1) confirmation that boring through the 8" block with one electrode is not required, and 2) clarification that the machine is a wire-type EDM drill, not a traditional drill. The questions suggest vendors are seeking precise technical specifications to ensure their proposed equipment meets the government's requirements for the procurement.

View the file

Other files

File Type Posted
Attachment 2 - Provisions and Clauses.pdf PDF
Attachment 4 - FAR 52.212-3(b).pdf PDF
Attachment 1 - Salient Characteristics.pdf PDF
Combined Synopsis_Solicitation - FA700025Q0082.pdf PDF
Attachment 3 - Buy American Certificate.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

QUESTIONS & ANSWERS

RFQ FA700025Q0082

USAFA Wire EDM Drill

1. We need to know if they want to bore through the 8" block with one electrode. If that is the case you will need a Z clearance of at least 17".

Answer: We do not need to be able to go through the 8” block with one electrode.

2. Can you clarify if the machine is actually a DRILL or WIRE type EDM?

Answer: It is a wire type EDM drill. It's not actually a drill. That's just the common name for it.

File details come from the government source that posted it. Updated .