Sijan Renovation Disposal RFQ Amendment 0001.pdf

FA700024Q0105

Sijan Renovation Disposal

Request for Quote

FA700024Q0105 Sijan Renovation Disposal

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulations (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

This solicitation is issued as a request for quotation (RFQ) in accordance with FAR part 12 and part 13 under solicitation number FA700024Q0105. The Request for Quotation (RFQ) number shall be used to reference any written quote provided under this RFQ. The RFQ document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-06, effective 08/29/2024, DFARS Change 08/15/2024, effective 08/15/2024 and Department Air Force Acquisition Circular (DAFAC) Change 2024-0612, effective 06/12/2024.

This is a 100% Small Business Set Aside.

Please read and comply with all requirements for submitting a quote under the solicitation instructions and the addenda to FAR 52.212-1. Failure to comply with all instructions contained within this synopsis/solicitation could result in the quote being ineligible for award. It is the quoter’s responsibility to ensure their quote meets all the requirements identified herein. The Government reserves the right to award all, some, or none.

The North American Industry Classification System (NAICS) code for this project is 484210 with a size standard of $34.0M.

*****Notice to Vendor(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this RFQ until funds are available. The Government reserves the right to cancel this RFQ, either before or after the closing date. In the event the Government cancels this RFQ, the Government has no obligation to reimburse a vendor for any costs. *****

I. DESCRIPTION OF REQUIREMENTS

Nonpersonal service for the contractor to provide all tools, materials, equipment, labor and coordination for the removal and disposal of all excess furniture, trash, and equipment that is no longer needed and currently in dormitory storage. These items will need to be disposed of through DLA (formerly known as DRMO), the dump, or donated as appropriate. The bid schedule and contract CLIN schedule are below. Note: All CLINs are Firm Fixed Price (FFP).

Item Supplies/Service Quantity Unit Unit Price Amount

0001 Non personal services for a contractor to provide all tools equipment, labor, vehicles, materials, and coordination with donation or drop off points, and perform inventory, loading, and transportation of all furniture and equipment identified for disposal located in the Sijan Hall Dormitory storage area on USAFA in accordance with the attached PWS. Storage Area 1D9 - Contents in place.

JB $ $

0002 Non personal services for a contractor to provide all tools equipment, labor, vehicles, materials, and coordination with donation or drop off points, and perform inventory, loading, and transportation of all furniture and equipment identified for disposal located in the Sijan Hall Dormitory storage area on USAFA in accordance with the attached PWS. Storage Area 1D9 – Group 1,2,3, and 4 identified in the PWS.

JB

Period of Performance (PoP): Service will be conducted at U.S. Air Force Academy, CO 80840. PoP dates: 15 Mar 2025

Inspection/Acceptance: The Government will inspect and accept service prior to transportation and accepted by proof of drop off, disposal or donation of the furniture and equipment. The contractor is expected to provide proof of delivery, or donation in a written form from the agency that accepted the donation and/or disposal ticket from a reputable disposal company, landfill, or other means for disposing large items.

II. SOLICITATION INSTRUCTIONS

1. In accordance with (IAW) FAR 13.004, in all instances throughout this solicitation any use of the word "proposal" should be understood as "quote". All instances of the word "offeror" should be understood as "quoter". All instances of the word "award" should be understood as "order".

2. The provision at FAR 52.212-1, Instructions to Offerors—Commercial Products and Commercial Services (Sep 2023), and the addenda listed below applies to this acquisition.

ADDENDA TO FAR 52.212-1:

a. Submission of offers. FAR 52.212-1(b) is amended to include the following:

(1) Submit signed and dated quotes via e-mail to:

10th Contracting Squadron

10 CONS/PKB

Attn: Mr. Andrew Richardson & Ms. Kristin Heikkila Email addresses:

andrew.richardson.25@us.af.mil kristin.heikkila@us.af.mil

Phone numbers:

Andrew Richardson: 719-333-8087 Kristin Heikkila: 719-333-3961

(2) Quotes are due by mail to the above address or by email no later than;

23 Sep 2024, 2:00 P.M. Mountain Daylight Time.

b. Questions and Answers. Questions concerning the solicitation or any of the attachments shall be provided in writing to the above address or by email no later than 19 Sep 2024, 4:00 P.M. Mountain Daylight Time. Answers will be compiled and posted electronically to the SAM.gov website: https://sam.gov/. All correspondence should clearly be marked with the solicitation number and the POC names.

c. Site Visit Schedule. A site visit is scheduled for 19 Sep 2024 at 10:00am – 12:00pm.

Meeting place is South Gate Visitor’s Center Parking Area 9:30am. Offerors requesting to attend the site visit shall limit attendee registration to one representative. RSVP to email addresses: andrew.richardson.25@us.af.mil, and kristin.heikkila@us.af.mil no later than 17 Sep 2024, 4:00pm. Space is limited and representatives not on the attendee registration list will not be permitted to attend the site visit on the day.

d. Quotation preparation instructions:

(1) General Instructions. The quoter shall follow the instructions set forth in provision 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (Sep 2023).

The Contracting Officer is not responsible for locating or obtaining any information not identified in the quote.

(2) Specific Instructions. Quotes shall consist of three parts, as identified below.

(a) PRICE. Submit the price quote in accordance with the line-item structure listed in the CLIN schedule of this solicitation. Price quotes shall be firm-fixed price. Price quotes must include unit prices and extended amounts for each line item (i.e., multiply the unit price and quantity for each line item). Include the total price (i.e., sum of all extended amounts) in the price quote. Include delivery terms and schedule, any discounts, and payment terms (e.g., Net 30) with the price quote. Include a price breakdown detailing costs for rentals, equipment, labor (category and hours), materials and any other reasonable costs.

(b) TECHNICAL APPROACH. Submit a technical approach that defines the tasks the offeror will take to complete the work as specified in the line-item structure listed in the CLIN schedule in paragraph I – Description of Requirements above and the PWS. The offeror is expected to submit their technical approach outlining how they will inventory, pickup and deliver to include timelines, coordination with multiple offices, schedule and transport. The offeror is expected to include in their technical approach the labor, transportation, tools, materials, equipment, and coordination needed to complete the removal of the excess furniture, trash, and equipment.

(c) CONTRACT DOCUMENTATION.

(i) Quoters are required to be registered in the System of Award

Management (SAM) (https://www.sam.gov) at the time the quotation is submitted in order to comply with the annual representations and certifications requirements. Quoters that are not registered in SAM at the time the quotation is submitted will not be considered for award.

(ii) Quotes shall include a completed copy of the following provisions that require fill-in text:

• FAR 52.212-3 The Offeror shall complete only paragraph

(b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u)) of this provision.

3. The addenda listed below to provision FAR 52.212-2, Evaluation—Commercial Products and Commercial Services (Nov 2021) applies to this acquisition. The evaluation factors to be included in paragraph (a) of this provision are Price and Technical Approach.

ADDENDA TO FAR 52.212-2:

BASIS FOR AWARD.

a. Evaluation will start with the lowest priced quote and continue until two quotes are found to be technically acceptable. Award will be made to the lowest priced technically acceptable quote if that quoter is determined responsible. Responsibility determination will include consideration of the quoters Supplier Performance Risk System (SPRS) risk assessments as outlined in DFARS 252.204-7024 - Notice on the Use of the Supplier Performance Risk System.

(1) Price. All pricing shall be rounded to the nearest dollar. The total quoted price will be evaluated for fairness and reasonableness IAW FAR 13.106- 3(a). Discounts identified in the quote will be included in the total quoted price. The lowest price quote may not necessarily be selected.

(2) Technical Approach. The evaluation team will evaluate the technical approach to determine if the quote meets the requirements identified in this solicitation and its attachments on an Acceptable/Unacceptable basis. To be considered “Acceptable,” the quote shall clearly state how the offeror intends to meet the minimum requirements that include but are not limited to;

inventory, pickup and delivery timelines, coordination with multiple offices, scheduling and transportation as identified in the solicitation and PWS. If a quote does not clearly meet the requirements of the solicitation, the quote will be rated “Unacceptable.” If the quoter’s rating is determined to be “Unacceptable”, the quoter may no longer be considered for award.

4. The clause at FAR 52.212-4, Contract Terms and Conditions—Commercial Products and Commercial Services (Nov 2023), and the addenda listed below applies to this acquisition.

ADDENDA TO FAR 52.212-4 (c) Changes:

Text in paragraph (c) is deleted and replaced with the following:

(c) Changes. Administrative changes in the terms and conditions of this contract may be written unilaterally by the Government. All other changes in the terms and conditions of this contract may be made only by written agreement of the parties.

52.237-1 Site Visit.

As prescribed in 37.110(a), insert the following provision:

Site Visit (Apr 1984)

Offerors or quoters are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award.

(End of provision)

Page6 of25

Clauses and Provisions

DFARS Clauses Incorporated by Reference

Number Title

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

DFARS Clauses Incorporated by Full Text

Effective Date

Dec 2018

Alternate/ Deviation

Variation

252.232-7006 Wide Area WorkFlow Payment Instructions.

As prescribed in 232.7004(b), use the following clause:

(Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause-

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) forfixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2inl, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Invoice 2inl

Page7 of25

(Contracting Officer: Insert either ''Invoice 2inl" or the applicable invoice and receiving report document type(s) forfzxed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC -F87-70-0

Issue By DoDAAC -FA7-00-0

Admin DoDAAC -FA7-00-0

Inspect By DoDAAC --

Ship To Code --

Ship From Code --

Mark For Code --

Service Approver (DoDAAC) -F4B-56-0

Service Acceptor (DoDAAC) -F4B-56-0

Accept at Other DoDAAC --

Page8 of25

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type ofpayment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements ofDFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point ofcontact.

Andrew Richardson (719) 333-8087

(Contracting Officer: Insert applicable information or ''Not applicable. '

(2) Contact the WAWF helpdesk at 866-618-5988, ifassistance is needed.

(End of clause)

LPO DoDAAC --

DCAA Auditor DoDAAC --

Other DoDAAC(s) --

Page9 of25

Special Contract Requirements

Contract Clauses

FAR Clauses Incorporated by Reference

Number

52.203-3 52.204-13 52.204-18 52.212-4 52.223-5 52.223-10 52.223-19 52.223-23 52.228-5 52.232-39

Title

Gratuities.

System for Award Management Maintenance.

Commercial and Government EntityCode Maintenance.

Contract Terms and Conditions-Commercial Products and Commercial Services.

Pollution Prevention and Right-to-Know Information.

Waste Reduction Program.

Compliance with Environmental Management Systems.

Sustainable Products and Services.

lnsurance-Work on a Government Installation.

Unenforceabilityof Unauthorized Obligations.

Date

Apr 1984 Oct 2018 Aug 2020 Nov 2023 May2024 May2024 May2011 May2024 Jan 1997 Jun 2013

Deviation Effective

Contract Terms and Conditions Required To Implement Statutes or Executive Orders- Commercial Products and Commercial Services.

As prescribed in 12.301(b)(4), insert the following clause:

(May 2024)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (May2024)

(a) The Contractor shall complywith the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal ConfidentialityAgreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided byKasperskyLab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889 (a)(l)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

52.212-5

Title

Date

Alternate/ Deviation

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022

252.204-7003 Control of Government Personnel Work Product. Apr 1992

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May2024

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Jan 2023 Services.

252.204-7020 NIST SP 800-171 DoD Assessment Requirements. Nov 2023 252.204-7022 Expediting Contract Closeout. May2021 252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7052 Restriction on the Acquisition of Certain Magnets, Tantalum, and Tungsten. May2024 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.232-7010 Levies on Contract Payments. Dec 2006 252.237-7010 Prohibition on Interrogation of Detainees byContractor Personnel. Jan 2023 252.243-7002 Requests for Equitable Adjustment. Dec 2022 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.247-7023 Transportation of Supplies bySea. Jan 2023

FAR Clauses Incorporated by Full Text

Page10 of25

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach ofContract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions oflaw or Executive orders applicable to acquisitions ofcommercial products and commercial services:

[Contracting Officer check as appropriate.]

[X] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C.

4655).

[] (2) 52.203-13, Contractor Code ofBusiness Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

[] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of2009 (Jun 2010) (Section 1553 ofPub. L. 111- 5). (Applies to contracts funded by the American Recovery and Reinvestment Act of2009.)

[] (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712); this clause does not apply to contracts ofDoD, NASA, the Coast Guard, or applicable elements ofthe intelligence community-see FAR 3.900(a).

[X] (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

[] (6) [Reserved].

[] (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 ofDiv. C).

[] (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 ofDiv. C).

[X] (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 ofDivision R ofPub. L. 117-328).

[] (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) (Pub. L. 115-390, title II).

[] (11)

(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Dec 2023) (Pub. L. 115-390, title 11).

[] (ii) Alternate I (Dec 2023) of52.204-30.

[X] (12) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment.

(Nov 2021) (31 U.S.C. 6101 note).

[] (13) 52.209-9, Updates ofPublicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

Page11 of25

[] (14) [Reserved].

[] (15) 52.219-3, Notice ofHUBZone Set-Aside or Sole-Source Award (Oct 2022) (15 U.S.C. 657a).

[] (16) 52.219-4, Notice ofPrice Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (ifthe offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

[] (17) [Reserved]

[X] (18)

(i) 52.219-6, Notice ofTotal Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[] (ii) Alternate I (Mar 2020) of52.219-6.

[] (19)

(i) 52.219-7, Notice ofPartial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[] (ii) Alternate I (Mar 2020) of52.219-7.

[X] (20) 52.219-8, Utilization ofSmall Business Concerns (Feb 2024) (15 U.S.C. 637(d)(2) and (3)).

[] (21)

(i) 52.219-9, Small Business Subcontracting Plan (Sep 2023) (15 U.S.C. 637(d)(4)).

[] (ii) Alternate I (Nov 2016) of52.219-9.

[] (iii) Alternate II (Nov 2016) of52.219-9.

[] (iv) Alternate III (Jun 2020) of52.219-9.

[] (v) Alternate IV (Sep 2023) of52.219-9.

[] (22)

(i) 52.219-13, Notice ofSet-Aside ofOrders (Mar 2020) (15 U.S.C. 644(r)).

Page12 of25

[] (ii) Alternate I (Mar 2020) of52.219-13.

[X] (23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 637s).

[] (24) 52.219-16, Liquidated Damages-Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)).

[] (25) 52.219-27, Notice ofSet-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024) (15 U.S.C. 657±).

[X] (26)

(i) 52.219-28, Post Award Small Business Program Rerepresentation (Feb 2024) (15 U.S.C. 632(a)(2)).

[] (ii) Alternate I (Mar 2020) of52.219-28.

[] (27) 52.219-29, Notice ofSet-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

[] (28) 52.219-30, Notice ofSet-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

[] (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)).

[] (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15U.S.C. 637(a)(17)).

[] (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

[] (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Feb 2024).

[X] (33) 52.222-21, Prohibition ofSegregated Facilities (Apr 2015).

[X] (34)

(i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

[] (ii) Alternate I (Feb 1999) of52.222-26.

[X] (35)

(i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

Page13 of25

[] (ii) Alternate I (Jul 2014) of52.222-35.

[X] (36)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

[] (ii) Alternate I (Jul 2014) of52.222-36.

[X] (37) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

[X] (38) 52.222-40, Notification ofEmployee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

[X] (39)

(i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627).

[] (ii) Alternate I (Mar 2015) of52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

[] (40) 52.222-54, Employment Eligibility Verification (May 2022) (Executive Order 12989). (Not applicable to the acquisition ofcommercially available off-the-shelfitems or certain other types ofcommercial products or commercial services as prescribed in FAR 22.1803.)

[] (41)

(i) 52.223-9, Estimate ofPercentage ofRecovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition ofcommercially available off-the-shelfitems.)

[] (ii) Alternate I (May 2008) of52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition ofcommercially available off-the-shelfitems.)

[] (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (May 2024) (42 U.S.C. 7671, et seq.).

[] (43) 52.223-12, Maintenance, Service, Repair, or Disposal ofRefrigeration Equipment and Air Conditioners (May 2024) (42 U.S.C. 7671, et seq.).

[] (44) 52.223-20, Aerosols (May 2024) (42 U.S.C. 7671, et seq.).

[] (45) 52.223-21, Foams (May 2024) (42 U.S.C. 7671, et seq.).

[] (46) 52.223-23, Sustainable Products and Services (May 2024) (E.O. 14057, 7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C.

76711).

[] (47)

Page14 of25

(i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

[] (ii) Alternate I (Jan 2017) of52.224-3.

[] (48)

(i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

[] (ii) Alternate I (Oct 2022) of52.225-1.

[] (49)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

[] (ii) Alternate I [Reserved].

[] (iii) Alternate II (Dec 2022) of52.225-3.

[] (iv) Alternate III (Feb 2024) of52.225-3.

[] (v) Alternate IV (Oct 2022) of52.225-3.

[] (50) 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

[] (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.'s, proclamations, and statutes administered by the Office ofForeign Assets Control ofthe Department ofthe Treasury).

[] (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, ofthe National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

[] (53) 52.226-4, Notice ofDisaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

[] (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

[X] (55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) (E.O. 13513).

[] (56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

Page15 of25

[] (57) 52.232-29, Terms for Financing ofPurchases ofCommercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C.

3805).

[] (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

[X] (59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) (31 U.S.C. 3332).

[] (60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

[] (61) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

[] (62) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

[] (63) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

[] (64)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631).

[] (ii) Alternate I (Apr 2003) of52.247-64.

[] (iii) Alternate II (Nov 2021) of52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions oflaw or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

[X] (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

[X] (2) 52.222-42, Statement ofEquivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

[] (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

[X] (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C.

chapter 67).

[] (5) 52.222-51, Exemption from Application ofthe Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

Page16 of25

[] (6) 52.222-53, Exemption from Application ofthe Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

[X] (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

[X] (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

[] (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).

(d) Comptroller General Examination ofRecord. The Contractor shall comply with the provisions ofthis paragraph (d) ifthis contract was awarded using other than sealed bid, is in excess ofthe simplified acquisition threshold, as defined in FAR 2.101, on the date ofaward ofthis contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General ofthe United States, or an authorized representative ofthe Comptroller General, shall have access to and right to examine any ofthe Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, ofthe other clauses ofthis contract. Ifthis contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement ofclaims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless oftype and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course ofbusiness or pursuant to a provision oflaw.

(e)

(1) Notwithstanding the requirements ofthe clauses in paragraphs (a), (b), (c), and (d) ofthis clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent ofthe flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code ofBusiness Ethics and Conduct (Nov 2021) (41 U.S.C. 3509).

(ii) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712).

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 ofDivision E, Title VII, ofthe Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 ofPub. L. 115-91).

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889 (a)(l)(A) ofPub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 ofDivision R ofPub. L. 117-328).

(vii)

(A) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Dec 2023) (Pub. L. 115-390, title 11).

(B) Alternate I (Dec 2023) of52.204-30.

(viii) 52.219-8, Utilization ofSmall Business Concerns (Feb 2024) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. Ifthe subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date ofsubcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) 52.222-21, Prohibition ofSegregated Facilities (Apr 2015).

(x) 52.222-26, Equal Opportunity (Sep 2015) (E.O.11246).

Page17 of25

(xi) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

(xiii) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

(xvi)

(A) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O 13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xix) 52.222-54, Employment Eligibility Verification (May 2022) (E.O. 12989).

(xx) 52.222-55, MinimUM Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

(xxii)

(A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xxiii) 52.225-26, Contractors Performing Private Security FUNCTIONS Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (JUN 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxvi) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal nUMber of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

252.211-7003 Item Unique Identification and Valuation.

As prescribed in 21 l.274-5(a), use the following clause:

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

(Jan 2023)

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Page18 of25

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together ofthe unique identifier data elements in order ofthe issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together ofthe unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up ofsquare or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO) /International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string ofcharacters) that immediately precedes a data field that defines the general category or intended use ofthe data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD.

All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

"DoD item unique identification" means a system ofmarking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements ofthe enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements ofthe enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time ofdelivery;

(2) For cost-type or undefmitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time ofdelivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register oflssuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping ofsubassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group ofitems, usually referred to as either a lot or a batch, all ofwhich were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination ofnumbers or letters assigned by the enterprise at item creation to a class ofitems with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination ofnumbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation ofthat item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination ofnumbers or letters assigned by the enterprise to an item that provides for the differentiation ofthat item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item ofa particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination ofletters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means ofdifferentiating between items having the same basic name and to indicate modifications and changes

Page19 of25 thereto.

"Unique item identifier" means a set ofdata elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method ofuniquely identifying a part has been used. The current list ofaccepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(Ifitems are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .

(iv) Any item ofspecial tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment NUMBER .

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics ofunique item identifiers. The Contractor shall ensure that-

(i) The data elements (except issuing agency code) ofthe unique item identifier are encoded within the data matrix symbol that is marked on the item using one ofthe following three types ofdata qualifiers, as determined by the Contractor:

(A) Application Identifiers (Als) (Format Indicator 05 ofISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (Dis) (Format Indicator 06 ofISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEis) (Format Indicator 12 ofISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements ofthe unique item identifier conform to the transfer structure, syntax, and coding ofmessages and data formats

Page20 of25 specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized UNIque identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements ofthe UNIque item identifier (enterprise identifier; serial number; DoD recognized UNIque identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(l) ofthis clause, based on the criteria provided in MIL-STD-130, Identification Marking ofU.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements ofMIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item UNIQue identification under paragraph (c)(l)(i), (ii), or (iv) ofthis clause or when item UNIque identification is provided under paragraph (c)(l)(v), in addition to the information provided as part ofthe Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time ofdelivery, as part ofthe Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (ifconcatenated unique item identifier is used).

(4) Enterprise identifier (ifconcatenated unique item identifier is used).

(5) Original part number (ifthere is serialization within the original part number).

(6) Lot or batch number (ifthere is serialization within the lot or batch number).

(7) Current part number (optional and only ifnot the same as the original part number).

(8) Current part number effective date (optional and only ifcurrent part number is used).

(9) Serial number (ifconcatenated unique item identifier is used).

(10) Government's UNit acquisition cost.

(11) Unit ofmeasure.

(12) Type designation ofthe item as specified in the contract schedule, ifany.

(13) Whether the item is an item ofSpecial Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item UNIque identification UNder paragraph (c)(1)(iii) ofthis clause or when item unique identification is provided UNDER paragraph (c)(1)(v), the Contractor shall report as part ofthe Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier ofthe parent item under paragraph (c)(l) ofthis clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier ofthe embedded subassembly, component, or part.

Page21 of25

(3) Unique item identifier type.**

(4) Issuing agency code (ifconcatenated unique item identifier is used).**

(5) Enterprise identifier (ifconcatenated unique item identifier is used).**

(6) Original part number (ifthere is serialization within the original part number).**

(7) Lot or batch number (ifthere is serialization within the lot or batch number).**

(8) Current part number…