Solicitation Amendment - FA670322B00040001.pdf

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NUMBER 5. REQUISITION/PURCHASE REQUEST NUMBER 6. PROJECT NUMBER

7. ISSUED BY CODE 8. ADDRESS OFFER TO

9. FOR INFORMATION

CALL:

a. NAME b. TELEPHONE NUMBER (Include area code) (NO COLLECT CALLS)

SOLICITATION

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying number, date)

11. The contractor shall begin performance within calendar days and complete it within calendar days after receiving award, notice to proceed. This performance period is mandatory negotiable. (See ).

13. ADDITIONAL SOLICITATION REQUIREMENTS:

a. Sealed offers in original and copies to perform the work required are due at the place specified in Item 8 by (hour) local time (date). If this is a sealed bid solicitation, offers will be publicly opened at that time. Sealed envelopes containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

b. An offer guarantee is, is not required.

c. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

d. Offers providing less than calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

STANDARD FORM 1442 (REV. 8/2014)

Prescribed by GSA - FAR (48 CFR) 53.236-1(d)

12a. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES", indicate within how many calendar days after award in Item 12b.)

12b. CALENDAR DAYS

YES NO

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NUMBER 2. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

3. DATE ISSUED PAGE OF PAGES

AMOUNTS

OFFER (Must be fully completed by offeror)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NUMBER (Include area code)

16. REMITTANCE ADDRESS (Include only if different than Item 14.)

CODE FACILITY CODE

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government in writing within calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement stated in Item 13d. Failure to insert any number means the offeror accepts the minimum in Item 13d.)

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT

NUMBER

DATE.

20a. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print) 20b. SIGNATURE 20c. OFFER DATE

21. ITEMS ACCEPTED:

AWARD (To be completed by Government)

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

28. NEGOTIATED AGREEMENT (Contractor is required to sign this document and return copies to issuing office.) Contractor agrees to furnish and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

29. AWARD (Contractor is not required to sign this document.) Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30a. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN (Type or print)

31a. NAME OF CONTRACTING OFFICER (Type or print)

30b. SIGNATURE 30c. DATE 31b. UNITED STATES OF AMERICA

BY

31c. DATE

STANDARD FORM 1442 (REV. 8/2014) BACK

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) ( ) 41 U.S.C. 3304(a) ( )

26. ADMINISTERED BY 27. PAYMENT WILL BE MADE BY

Section A - Solicitation/Contract Form

Rubber Removal and Maintain Markings Indefinite Delivery Indefinite Quantity (IDIQ) Dobbins ARB

Purchase Requisition Number: F5B3232132AW01

FA670322B00040001

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

The Offeror's Base Period Bid and all Option period will be evaluated. The basis for award is lowest priced responsive responsible bid. In accordance with FAR 52.217-5, Evaluation of Options, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. Evaluation of options will not obligate the Government to exercise the option(s). Offerors must insert a unit price and amount on all CLINS, to include options and a Total Amount of All CLINS Amount.

Failure to submit a price for each CLIN and a Total Amount for All CLINs shall cause the bid to be nonresponsive.

TOTAL AMOUNT FOR ALL CLINS: $_______________________________________

"Drawings" as referenced in some of the CLINs refer to the drawings issued with each task order. For example, Attachment A_6 SEED Drawing.

The "specifications" found in the description of some CLINs refers to Attachment 1, Specifications, Rubber Removal and Maintain Markings, Project FGWB 22-0001, 5 May 2022.

Acronyms found in the CLINS are listed as follows:

VEDA ALZ- Veda Assault Landing Zone CMA- Controlled Movement Area VFR- Visual Flight Rules FOD- Foreign Object Debris INS- Inertial Navigation System LG -Large SM- Small

Definitions Mobilization-while not all inclusive, accounts for activation of a contractor's physical and manpower resources and transfer to Dobbins ARB Demobilization- while not all inclusive accounts for deactivation of a contractor's physical and manpower resources and transfer from Dobbins ARB

CONTRACT PRICING MINIMUMS AND MAXIMUMS

A. The guaranteed minimum amount to be ordered for this contract, to include any exercised options, is $100,000.00.

B. The maximum amount to be ordered for this contract for the base, and all option periods, if exercised by the Government, is $1,250,000.00. If the maximum aggregate amount of $1,250,000.00 is reached prior to the end date of the final period of performance, no further task orders will be issued on the contract.

Item Supplies/Service Qty Unit Unit Price

Amount

RUBBER REMOVAL - R/W

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to remove rubber on the runway in accordance with the attached specifications and 360,000 Square Foot drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

RUBBER REMOVAL - VEDA ALZ

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to remove rubber, VEDA ALZ on the runway in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

72,000 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT RUNWAY CENTER LINE 3' WIDE (WITH 6"

BLACK BORDER) (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

16,920 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT RUNWAY CENTER LINE 3' WIDE (WITH 6"

BLACK BORDER) (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

5,000 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT RUNWAY EDGE LINE 3' WIDE (WITH 6"

BLACK BORDER) (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

59,760 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT RUNWAY EDGE LINE 3' WIDE (WITH 6"

BLACK BORDER) (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

10,000 Square Foot

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT CMA LINES (4.5 FT WIDE: 6" BLACK- 6"

YELLOW- 6" BLACK- 6" YELLOW -6" BLACK -6"

YELLOW - 6" BLACK-6" YELLOW - 6" BLACK) (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,165 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT CMA LINES (4.5 FT WIDE: 6" BLACK- 6"

YELLOW- 6" BLACK- 6" YELLOW -6" BLACK -6"

YELLOW - 6" BLACK-6" YELLOW - 6" BLACK) (TYPE III

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

700 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT VEDA ALZ MARKINGS (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

300 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT VEDA ALZ

MARKINGS (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

300 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to perform MOLD REMOVAL AND SPECIALIZED SURFACE PREP in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

5,000 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT THRESHOLD (WITH 6" BLACK BORDER)

(TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

20,700 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT THRESHOLD (WITH 6" BLACK BORDER)

(TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

6,000 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT NUMBERS (#29 AND #11) (WITH 6" BLACK

BORDER) (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

4 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT NUMBERS (#29 AND #11) (WITH 6" BLACK

BORDER) (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT GROUND RECEIVER CHECKPOINTS (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT GROUND RECEIVER CHECKPOINTS (TYPE

III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT VFR HOLD LINES (4.5 FT WIDE: 6" BLACK- 6"

YELLOW- 6" BLACK- 6" YELLOW -6" BLACK -6"

YELLOW - 6" BLACK-6" YELLOW - 6" BLACK) (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,214 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT VFR HOLD LINES (4.5 FT WIDE: 6" BLACK- 6"

YELLOW- 6" BLACK- 6" YELLOW -6" BLACK -6"

YELLOW - 6" BLACK-6" YELLOW - 6" BLACK) (TYPE III

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

600 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT VFR HOLD LINES (8 FT WIDE: 6" BLACK- 12"

YELLOW- 12" BLACK- 12" YELLOW -12" BLACK -12"

YELLOW - 12" BLACK-12" YELLOW - 6" BLACK) (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

500 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT VFR HOLD LINES (8 FT WIDE: 6" BLACK- 12"

YELLOW- 12" BLACK- 12" YELLOW -12" BLACK -12"

YELLOW - 12" BLACK-12" YELLOW - 6" BLACK) (TYPE

III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

500 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT TAXIWAY LINES (CENTERLINE: 1.5 FT

WIDE: 6" BLACK- 6" YELLOW- 6" BLACK)(EDGELINE: 2.5

FT WIDE: 6" BLACK- 6" YELLOW- 6" BLACK- 6" YELLOW

-6" BLACK) (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

50,222 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT TAXIWAY LINES (CENTERLINE: 1.5 FT

WIDE: 6" BLACK- 6" YELLOW- 6" BLACK)(EDGELINE: 2.5

FT WIDE: 6" BLACK- 6" YELLOW- 6" BLACK- 6" YELLOW

-6" BLACK) (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

10,000 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to perform PAINT REMOVAL - 100%, on the Airfield and Roads, in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,448 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to perform PAINT REMOVAL - 80% ,on the Airfield and Roads, in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

23,103 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT INSTRUMENT LINE (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1,287 Square Foot

Maintain Markings

FFP

supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT INSTRUMENT LINE (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

400 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT FIXED DISTANCE MARKERS (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

18,000 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT FIXED DISTANCE MARKERS (TYPE III

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

6,000 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT HELIPAD (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT HELIPAD (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT TOUCHDOWN ZONE MARKINGS (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

16,200 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT TOUCHDOWN ZONE MARKINGS (TYPE I II

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

5,000 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT STOP CONTACT TOWER MARKINGS (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT STOP CONTACT TOWER MARKINGS (TYPE

III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT FOD CHECKPOINT LINE (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

734 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT FOD CHECKPOINT LINE (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

250 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, 0038 supervision, and transportation necessary to CLEAN, LAYOUT, AND 'PAINT CHECK FOR FOD' (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

11 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND 'PAINT CHECK FOR FOD' (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

4 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT INS CHECKPOINTS (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

19 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT INS CHECKPOINTS (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

6 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT OBSTRUCTION CLEARANCE LINE (4" WIDE, GREEN NON-REFLECTIVE) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

100 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT 6" RESTRICTED AREA LINE (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

2,580 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT 6" RESTRICTED AREA LINE (TYPE III

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

800 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT RESTRICTED AREA SIGNAGE (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

66 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT RESTRICTED AREA SIGNAGE (TYPE III

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

20 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT LG (ALTERNATE) CLOSED PAVEMENT

MARKING (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT LG (ALTERNATE) CLOSED PAVEMENT

MARKING (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT LG CLOSED PAVEMENT MARKING (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT LG CLOSED PAVEMENT MARKING (TYPE III

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT SM CLOSED PAVEMENT MARKING (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT SM CLOSED PAVEMENT MARKING (TYPE III

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT ENTRY CONTROL POINTS (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

5 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT ENTRY CONTROL POINTS (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT CHEVRONS (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,500 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT CHEVRONS (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,500 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT ENHANCED CENTERLINE MARKINGS (3 FT

WIDE: 3" BLACK- 6" YELLOW- 6" BLACK- 6" YELLOW- 6"

BLACK- 6" YELLOW- 3" BLACK) (TYPE I BEADS)in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

500 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT ENHANCED CENTERLINE MARKINGS (3 FT

WIDE: 3" BLACK- 6" YELLOW- 6" BLACK- 6" YELLOW- 6"

BLACK- 6" YELLOW- 3" BLACK) (TYPE III BEADS)in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

500 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT PARKING STOP BAR (3 FT WIDE X 1 FT

LONG) (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

15 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT PARKING STOP BAR (3 FT WIDE X 1 FT

LONG) (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

4 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT SURFACE PAINTED RUNWAY HOLD

POSITION SIGNS (~14.5 FT X 21.2 FT) (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

200 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT SURFACE PAINTED RUNWAY HOLD

POSITION SIGNS (~14.5 FT X 21.2 FT) (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

200 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT ACCESS ROAD STOP MARKINGS in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

12 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT ROADWAY MARKINGS WHITE in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

255 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT ROADWAY MARKINGS YELLOW in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

50 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT WINGTIP CLEARANCE LINES (6" WHITE, 6"

SPACE, 6" WHITE) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1,187 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to MOBILIZE in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to DEMOBILIZE in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Option Line Item

RUBBER REMOVAL - R/W

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to remove rubber on the runway in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

360,000 Square Foot

Option Line Item

RUBBER REMOVAL - VEDA ALZ

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to remove rubber, VEDA ALZ on the runway in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

72,000 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT RUNWAY CENTER LINE 3' WIDE (WITH 6"

BLACK BORDER) (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,500 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT RUNWAY CENTER LINE 3' WIDE (WITH 6"

BLACK BORDER) (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,500 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT RUNWAY EDGE LINE 3' WIDE (WITH 6"

BLACK BORDER) (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,500 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT RUNWAY EDGE LINE 3' WIDE (WITH 6"

BLACK BORDER) (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,500 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT CMA LINES (4.5 FT WIDE: 6" BLACK- 6"

YELLOW- 6" BLACK- 6" YELLOW -6" BLACK -6"

YELLOW - 6" BLACK-6" YELLOW - 6" BLACK) (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

1,000 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT CMA LINES (4.5 FT WIDE: 6" BLACK- 6"

YELLOW- 6" BLACK- 6" YELLOW -6" BLACK -6"

YELLOW - 6" BLACK-6" YELLOW - 6" BLACK) (TYPE III

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1,000 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT VEDA ALZ MARKINGS (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1,440 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT VEDA ALZ

MARKINGS (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

500 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to perform MOLD REMOVAL AND SPECIALIZED SURFACE PREP in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1,000 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT THRESHOLD (WITH 6" BLACK BORDER)

(TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,500 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT THRESHOLD (WITH 6" BLACK BORDER)

(TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,500 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT NUMBERS (#29 AND #11) (WITH 6" BLACK

BORDER) (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2 Each

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT NUMBERS (#29 AND #11) (WITH 6" BLACK

BORDER) (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2 Each

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT GROUND RECEIVER CHECKPOINTS (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

3 Each

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT GROUND RECEIVER CHECKPOINTS (TYPE

III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1 Each

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT VFR HOLD LINES (4.5 FT WIDE: 6" BLACK- 6"

YELLOW- 6" BLACK- 6" YELLOW -6" BLACK -6"

YELLOW - 6" BLACK-6" YELLOW - 6" BLACK) (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

1,000 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT VFR HOLD LINES (4.5 FT WIDE: 6" BLACK- 6"

YELLOW- 6" BLACK- 6" YELLOW -6" BLACK -6"

YELLOW - 6" BLACK-6" YELLOW - 6" BLACK) (TYPE III

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,500 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT VFR HOLD LINES (8 FT WIDE: 6" BLACK- 12"

YELLOW- 12" BLACK- 12" YELLOW -12" BLACK -12"

YELLOW - 12" BLACK-12" YELLOW - 6" BLACK) (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

500 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT VFR HOLD LINES (8 FT WIDE: 6" BLACK- 12"

YELLOW- 12" BLACK- 12" YELLOW -12" BLACK -12"

YELLOW - 12" BLACK-12" YELLOW - 6" BLACK) (TYPE

III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

500 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT TAXIWAY LINES (CENTERLINE: 1.5 FT

WIDE: 6" BLACK- 6" YELLOW- 6" BLACK)(EDGELINE: 2.5

FT WIDE: 6" BLACK- 6" YELLOW- 6" BLACK- 6" YELLOW

-6" BLACK) (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

120,000 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT TAXIWAY LINES (CENTERLINE: 1.5 FT

WIDE: 6" BLACK- 6" YELLOW- 6" BLACK)(EDGELINE: 2.5

FT WIDE: 6" BLACK- 6" YELLOW- 6" BLACK- 6" YELLOW

-6" BLACK) (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

10,000 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to perform PAINT REMOVAL - 100%, on the Airfield and Roads, in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,000 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to perform PAINT REMOVAL - 80%, on the Airfield and Roads, in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

25,000 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT INSTRUMENT LINE (TYPE I BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

500 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT INSTRUMENT LINE (TYPE III BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

2,000 Square Foot

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT FIXED DISTANCE MARKERS (TYPE I

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product Service Code: Z1BD Pricing Arrangement: Firm Fixed Price

500 Square Foot

Option Line Item

Maintain Markings

FFP

Contractor to provide all labor, materials, equipment, supervision, and transportation necessary to CLEAN, LAYOUT, AND PAINT FIXED DISTANCE MARKERS (TYPE III

BEADS) in accordance with the attached specifications and drawings. The performance will normally be scheduled during a runway closure period and allow for 24 hour operation.

Product…