RFI 001_YTPM 13-0015 Repair Roof MEPCOM.pdf
PDF 271 KB Posted
- Attached to
- Repair Roof MEPCOM Facility, Bldg. 5411
- Solicitation number
- FA660623B0004
About this file
This document contains responses to a contractor's questions regarding solicitation number FA660623B0004 from the Department of the Air Force Reserve Command to repair the roof of building 5411 at MEPCOM Facility. The solicitation involves cladding the stucco portions of the building's parapet and front entrance in new metal panels. While the thickness of the existing stucco is unknown, a standard louver meeting wind-driven rain resistance requirements would be acceptable according to the specifications, rather than the extruded louver specified in the drawings. Additionally, the front of the building and columns are brick and are to remain as is - only the stucco portions of the parapet will be clad in new metal panels.
View the file
Other files
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR INFORMATION REPORT (RFI)
RFI NO. PAGE NO.
SOLICITATION TITLE
Contractor's Request for Information
REQUESTED BY: DATE REQUESTED: Potential Cost Impact
[No] Potential Schedule
Impact [No]SUBCONTRACTOR
RFI
SUBJECT:
DRAWINGS
INFORMATION REQUESTED:
ATTACHMENTS FROM CONTRACTOR: (1 attachment)
NOTE: THE RFI SYSTEM IS INTENDED TO PROVIDE AN EFFICIENT MECHANISM FOR RESPONDING TO CONTRACTOR'S REQUESTS FOR
INFORMATION. IT DOES NOT PROVIDE AUTHORITY TO PROCEED WITH ADDITIONAL WORK. IF THE CONTRACTOR CONSIDERS
THE RFI RESPONSE A CHANGED CONDITION, PROVIDE WRITTEN NOTICE TO THE CONTRACTING OFFICER'S REPRESENTATIVE
IN ACCORDANCE WITH CONTRACT PROVISIONS.
QA REVIEWER'S SIGNATURE DATE
RFI FORM
SOLICITATION NO.
1. Regarding the Metal Panels at the front entrance, Is the thickness of the stucco known
WARB Response:
2. Also are the two front columns being wrapped in metal as well?
WARB Response:
3. On drawing page A202, Louver L-A is spec’d from Copper Craft. However, Copper Craft does not have an extruded Louver as spec’d. Will a standard Louver be acceptable?
WARB Response:
FA660623B0004 Repair Roof MEPCOM Facility, Bldg 5411
Thickness of the stucco is unknown.
A standard louver is acceptable as long as it meets the wind-driven rain resistance requirement.
Richard B. Colburn, Jr.
Chief of Design
It is the back side of the parapet that is stucco and will have new metal panels. The front side and columns are brick and to remain as is. Only the stucco portions are being clad in metal. The brick portion will remain brick.
| 2023-07-25T09:59:52-0400 | |
| COLBURN.RICHARD.BRENNAN.JR.1005546342 |
File details come from the government source that posted it. Updated .