Att 3 -Amended Salient Characteristics.pdf
PDF 237 KB Posted
- Attached to
- Amendment 2: Automatic Tube Bender Federal contract opportunity
- Solicitation number
- FA568223Q8045
About this file
This document outlines the specifications for an automatic tube bending machine and related tooling and services required under Solicitation Number FA568223Q8045 from the Department of the Air Force United States Air Forces in Europe - Air Forces Africa. The solicitation seeks an automatic or CNC tube bending machine with three-position headshifter and tooling for bending tubes up to 50mm in diameter, along with a vector measuring system, tooling package, and three days of on-site installation assistance and training. The machine must be able to bend tubes up to 3,000mm in length with bend radii up to 150mm, and include programmable axes, electric clamping, and network connectivity. The vendor must supply blueprints demonstrating compliance with Air Force requirements for automatic tube benders. Delivery is required to Aviano Air Base in Italy.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment 2 FA568223Q8045- SOLICITATION.pdf | ||
| FA568223Q8045 CNC Tube Bender Q.pdf | ||
| Att 2 - 52.212-1 Instructions to Offerors (FULL TEXT).pdf | ||
| FA568223Q8045- SOLICITATION.pdf | ||
| Att 1 - Provisions amd Clauses.pdf | ||
| Att 3 -Salient Characteristics.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT 3
FA568223Q8045 – Requirement Specifications
Automatic / CNC Tube Bending Machine
0001 CNC Tube Bending Machine -Package Includes:
-Three-position headshifter -Tooling set for Serpentine 3/8 x 0.020 x 1.250 CLR -All-electric CNC rotary draw bending machine for up to 42 mm / 50mm diameters -Position Controlled Pressure Die and Pressure Die Assist -Programmable Head Shifter -Mandrel Bending Package with Programmable Tangent Adjust -Programmable X Axis -Rubberflex with tube stop -Remote Start Footswitch -Collet Control Footswitch -Uninterruptable Power Supply -Machine Mounts -Air Conditioner -Bend Radius (CLR) Range: maximum 150mm -Maximum Tube Length Over Mandrel: 3,000 mm (base machine configuration) -Single or Multi-Stack Tooling Capability -User friendly industrial control system -Programmable Axes Motions for Y, B, C, Clamp, Pressure Die, Follower, Mandrel (Optional), Radius (Optional) and Stack Shift (Optional) -24 volt pneumatic valves -Approximate Dimensions: 5M Long x 1.5M Wide x 1.8M High -Approximate Weight: 2725 kg -Patented dual-link driven bend arm -Reversible bend arm rotation (RH converts to LH) -Programmable "constant force" electric clamp die actuator -Windows network interface allows remote access via internet -380v/50 HZ/3-phase -To meet OSHA, AFI, and European regulations.
0002 Vector Measuring System -Measurements within 6 microns, 3-D graphic imaging, interfaces with CNC benders
- Maximum Outside Tube Diameter: 51 mm (based on standard collet)
- Stainless Steel 1.65” (42mm) OD x .083” (2.1mm) Wall X 2D*
- Mild Steel 1.65” (42mm) OD x .083” (2.1mm) Wall X 2D*
- Aluminum Alloy (Ref. 6061 T-4) 2.00” (51mm) OD x .083” (2.1mm) Wall X 2D*
- Bend Radius (CLR) Range: maximum 150mm
- Maximum Tube Length Over Mandrel: 3,000 mm
- Reversible bend arm rotation (RH converts to LH)
0003 Tooling Package (Compatible with proposed CNC Tube Bending Machine)
-Bend die, insert, clamp, pressure die, and back wiper: 0.250", 0.375", 0.5", 0.625", 1", 1.25", and 1.5".
- Mandrels For Steel: 1 ball mandrel - 0.25" OD X 0.035" Wall, 1 ball mandrel - 0.25" OD X 0.02" Wall, 1 ball mandrel - 0.25" OD X 0.028" Wall, 1 ball mandrel - 0.25" OD X 0.049" Wall, 1 ball mandrel - 0.312" OD X 0.020" Wall, 1 ball mandrel - 0.312" OD X 0.028" Wall, 1 ball mandrel - 0.312" OD X 0.035" Wall, 1 ball mandrel - 0.375" OD X 0.020" Wall, 1 ball mandrel - 0.375" OD X 0.035" Wall, 1 ball mandrel - 0.500" OD X 0.028" Wall, 1 ball mandrel - 0.500" OD X 0.035" Wall, 1 ball mandrel - 0.625" OD X 0.028" Wall, 1 ball mandrel - 0.500" OD X 0.049" Wall, 1 ball mandrel - 0.625" OD X 0.042" Wall, 1 ball mandrel - 0.750" OD X 0.035" Wall, 1 ball mandrel
- 0.750" OD X 0.049" Wall, 1 ball mandrel - 0.750" OD X 0.065" Wall, 1 ball mandrel - 0.625" OD X 0.042" Wall, 1 ball mandrel - 0.750" OD X 0.035" Wall
- Mandrels For Aluminum: 1 ball mandrel - 0.25" OD X 0.020" Wall, 1 ball mandrel - 0.25" OD X 0.022" Wall, 1 ball mandrel - 0.25" OD X 0.028" Wall, 1 ball mandrel - 0.312" OD X 0.028" Wall, 1 ball mandrel - 0.312" OD X 0.025" Wall, 1 ball mandrel - 0.312" OD X 0.028" Wall, 1 ball mandrel - 0.375" OD X 0.028" Wall, 1 ball mandrel - 0.375" OD X 0.035" Wall, 1 ball mandrel - 0.500" OD X 0.028" Wall, 1 ball mandrel - 0.500" OD X 0.065" Wall, 1 ball mandrel - 0.625" OD X 0.028" Wall, 1 ball mandrel - 0.625" OD X 0.049" Wall, 1 ball mandrel - 0.750" OD X 0.049" Wall, 1 ball mandrel - 0.750" OD X 0.035" Wall, 1 ball mandrel - 0.188" OD X 0.028" Wall, 1 ball mandrel - 0.625" OD X 0.035" Wal
ATTACHMENT 3
0004 Three (3) days on-site installation assistance and training
0005 Shipping to Aviano AB, Italy
- In addition to the above listed specifications vendors must be able to supply blueprints of the proposed system for evaluation. In order to be found acceptable, the blueprints must be in compliance with the Air Force approved Automatic Tube Bender.
File details come from the government source that posted it. Updated .