Attachment 4 - Questions and Answers.docx

BDOC Fit Out Questions:

Questions are listed above with white font; answers follow with red font.

Do you have specific model number / part numbers for the equipment?

Which Bosch DIVAR recorder?

1. Bosch DIVAR IP 7000/ 6000 R2 configuration via LSI MegaRAID Storage Manager

1. Vertiv Avocent MPU8032DAC KVM switch Rack mounting Black. Keyboard port type: USB, Mouse port type: USB, Video port type: VGA. Cabling technology: 10/100/1000Base-T(X), Security algorithms: 128-bit SSL, AES, DES, FIPS 140-2. Maximum resolution: 1680 x 1200 pixels, Maximum analog resolution: 1600 x 1200 pixels, Video bandwidth: 60 Hz.

1. Z4 G4 Management Workstation; High-performance workstation with Intel’s next-generation microarchitecture; Multi-monitor support (NVIDIA RTX A2000, 12 GB graphics card or NVIDIA T1000, 4 GB graphics card)

1. Bosch Video Management System (BVMS) System Licence‘s 1.

1. VIDEOJET multi 4000 from Bosch is a 16-channel CCTV video encoder that offers top-of-the-line Video-over-IP performance for CCTV today. The VIDEOJET multi 4000 H.264 High Profile encoder delivers real-time H.264 compressed video over IPv4 and IPv6 networks. It provides Dual Streaming per camera with full frame rate at best quality. The unit supports PAL and NTSC sources and offers bidirectional audio communication in parallel to video. View the video on a PC using Bosch's comprehensive video management system, with or without Bosch's IntuiKey keyboard. Alternatively, use a Web browser. Bosch VideoSDK provides the means to integrate the encoder with other video management systems. With 16 channels in a rack-mountable 1HU form factor VIDEOJET multi 4000 offers the highest port density at this quality of video. Its 1 Gbps Ethernet interface allows to deliver IP video fast and with low delay.

1. Bosch High-performance H.265 UHD Decoder, Functions: Video Decoding, Video Streaming, 3840 x 2160, H.265, H.264, MPEG-4, DisplayPort, Network (RJ-45)

How much storage is required (in TB)? If this is not known we can calculate it from the number of cameras and the required duration of recording. Need footage kept for 60 days for 250 cameras.

Why are they requesting two racks? This refers to monitor racks not communications racks.

If the existing equipment is being replaced, the new equipment should fit in a single rack.

Does any existing equipment need to be moved into the new racks? Only Fiber connections If so, who is doing this? Contractor Where will the new racks go? Monitor racks will go behind the desk.

Is there space for the new racks? Yes Who will supply the power for the new racks? 48 CES (MSET 22-2000) Where do the 10 new monitors need to go? Mounted behind the desk Do they need new cables running or re-use existing? New cabling Who will run cables? Contractor Can we arrange a site visit? Yes, but it is currently under construction and will need to contact 48 CES.