Answers (2) for questions for Command Post console.docx

Answers (2) for Command Post Console

1. Reference Section n - Desktop power outlets (US and UK sockets Question- How many power outlets do you require of each type per operator position?

4-6 total. Would like 1x UK power circuit each console.

2. You indicated that you are requesting sit-stand consoles as opposed to fixed height consoles. The Primary console is shown in your drawings with two 45 deg. mitered corners. Sit-stands are normally rectangular and not angled. Do you still want sit-stands in these locations?

Sit/stand not required for 45 deg mitered corners.

3. Also, is the shelf area that goes at an angle in your drawings (primary console) going to be an attached bridge – with the same finishes?

Same finishes.

4. In area J, the corner unit on the left, will the sit stand surface be just the peninsula area or the entire surface?

Not the entire work surface. Only the controller workstations.

5. Do you need convenience outlets at the work surface?

Yes

6. You indicate that you do not need USB chargers, but do you need North American power outlets?

Yes, we need North American Power outlets

7. The Spec says that the PC's are 22" high. Is this accurate? 17" is the norm for full sized towers.

We will fit out the console with new PCs. 17” is acceptable

8. Also, do you know what the depth and width of the PC's are?

No