Q_A Sheet Hoist and Lifts YAB Tama.pdf
PDF 2 MB Posted
- Solicitation number
- FA520924Q0089
About this file
This document contains a Q&A sheet related to a federal contract opportunity for the annual inspection of hoists and hydraulic lifts at Yokota Air Base and Tama Annex in Japan. The key details are:
The contract requires the contractor to provide supervision, equipment, tools, materials, vehicles, and other items and services necessary to perform annual inspection of hoists and hydraulic vehicle lifts in accordance with Japanese regulations and standards. The contract has a 12-month basic period with four 1-year option periods. The government will not provide temporary storage space for inspection weights. The contractor is responsible for following the manufacturer's inspection item list for the hydraulic lifts. Some buildings have cranes that can travel, not just traverse. Specific details on the hoists, lifts, and site conditions are provided in the Q&A.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Question Response
1 Provide a photo of "Affixed Test Data" described in P2 1.2.2 of PWS. Info provided at the site visit.
2 Provide the test conditions for each hoist, such as to hang the rated load or to use a hanging scale with an anchor provided.
Hanging scale with anchor points not allowed.
3 Provide the scaffolding conditions for each site, such as inspection scaffolding, stepladders, ladders, work vehicles, etc.
Info for B906, 907, and 4125 was provided at the site visit. For rest of the buildings, please refer to the following pages.
4 Confirm if the biannual performance inspection (性能検査) is a part of the requirement or not.
No statutory performance inspection by Japan Crane Association necessary.
5 Provide the delivery route and conditions for each hoist installation site.
Info for B906, 907, and 4125 was provided at the site visit. For rest of the building, please refer to the following pages.
6 Provide the most recent inspection month for each building.
Inspection for all the hoists and lifts were conducted in January, except Stertil Koni (B85), Bendpack (B4125), and Hunter (B4125) Lifts. Inspection for these 3 lifts were conducted in May.
During the inspection period, can the government secure a temporary storage space for the inspection weights? (for a 4-ton truck and aerial work platform) If possible, we would like to use that space as a base to pick up the necessary weights and transport them to each building.
Gov will not provide a temporary storage space.
8 Provide the inspection item list for the hydraulic lift. Please follow the manufacturor's inspection Item list.
9 Are there cranes that travel, not just traverse, in buildings other than the B4125? If so, please let us know which buildings and how many there are.
Please refer to the following pages.
FA520924Q0089 Annual Inspection of Hoists & Hydraulic Lifts
BLDG NO. ITEM DESCRIPTION CAPACITY REMARKS
YOKOTA AB
85 Electric Driven Type 3 ton x 1 ea Mitsubishi-denki No obstables, truck access OK scafolding Electric Driven Type 0.5 ton x 10 ea Kito No obstables, truck access OK laddar Electric Driven Type 5 ton x 2 ea Kito No obstables, truck access OK no scafolding
610 Electric Driven Type 4 ton (8000 lbs.) x 2 ea Kito No obstables, truck access OK scafolding 702 Electirc Driven Type 3 ton x 1 ea Kito No obstables, truck access OK laddar
Manual Type 1.6 ton x 1 ea Elephant Chain Block Obstacle (yellow storage box), truck access OK no scafolding Manual Type 0.5 ton x 1 ea No obstables, truck access OK no scafolding
756 (Electrical Systems) Electric Driven Type 2 ton x 2 ea Hitachi No obstables, truck access OK no scafolding 756 (Power Production) Electric Driven Type 7.5 ton x 1 ea Mitsubishi-denki No obstables, truck access OK no scafolding 804 (2nd FL) Electric Driven Type 0.5 ton x 2 ea Kito No obstables, truck access from ground floor no scafolding 804 (Roof-top) Electric Driven Type 0.5 ton x 1 ea Kito (Jib crane) No obstables, turck access from ground floor no scafolding
Electric Driven Type 2 ton x 2 ea Hitachi Manual Type 2 ton x 2 ea
912 Electric Driven Type 2.0 ton 1 EA Kito Obstacle (simulator in middle), truck access OK no scafolding 934 Electric Driven Type 2.4 ton x 1 ea Kito No obstables, truck access OK no scafolding 1221 Electric Driven Type 0.5 ton x 1 ea Kito Tight space, no truck access no scafolding 1585 (2nd FL) Electric Driven Type 1 ton x 1 ea Kito No obstacles, truck access from ground floor no scafolding 1587 Electric Driven Type 2.5 ton x 1 ea Kito (Explosion proof) No obstables, truck access OK laddar 4100 Manual Type 2 ton x 2 ea No obstables, truck access OK no scafolding 4125 Electric Driven Type 3 ton x 2 ea Mitsubishi-denki 4127 Electric Driven Type 3 ton x 1 ea Mitsubishi-denki No obstables, truck access scafolding 4155 Electric Driven Type 1.5 ton x 1 ea No truck access, tight entrance, Vynil floor no scafolding
BLDG NO. ITEM DESCRIPTION CAPACITY REMARKS
TAMA SA
Electric Driven Type 0.5 ton x 1 ea Manual Type 0.8 ton x 1 ea
1010 Electric Driven Type 1.5 ton x 1 ea No obstables, truck access OK scafolding
HOIST
HOIST
Scafolding conditions no scafolding
Scafolding Condition
Deliver Route and Conditions (more info see "Pics" Tab)
Deliver Route and Conditions
No obstables, truck access OK
Info provided at site visit
Info provided at site visit
BLDG NO. QUANTITY
ABILITY 17,500 KG
TABLE DIMENSIONS 4673 MM
MAXIMUM HEIGHT 1829 MM
MINIMUM HEIGHT 222 MM
LIFT
ELECTRIC MOTOR 208/230V, 1PH, 60HZ
ASCENT TIME
DECENT TIME
CYLENDER
PUMP
ABILITY 1,500 Kg TABLE DIMENSIONS 1100 x 9000 MAXIMUM HEIGHT 2,600mm MINIMUM HEIGHT 800mm LIFT 1,800mm
3Ø-200v-50Hz, 3.7Kw
ASCENT TIME Approx. 40seconds
DESCENT TIME Approx. 40seconds, Adjustable
CYLINDER 80mmdia. x 550st x 4 pieces
140Kg/cm², 12.7L/min
ABILITY 5,000 Kg LIFT 1,700mm
3Ø-200v-50Hz, 2.2Kw
BLDG 85
5 TON HYDRAULIC LIFT, Banzai Co., Ltd.
1 UNIT
ELECTRIC MOTOR
WORK LIFT, Stertil KONI (ST4175)
1 UNIT
ELECTRIC MOTOR
PUMP
WORK LIFT, Banzai Co., Ltd.
1 UNIT
Deliver Route and Conditions
No obstables, truck access OK
No obstables, truck access OK
No obstables, truck access OK
TYPE
HYDRAULIC VEHICLE LIFT
ABILITY 4,000 Kg LIFT 1,700mm
3Ø-200v-50Hz, 2.2Kw
ASCENT TIME Approx. 60seconds
ABILITY 10,000 Kg LIFT 450mm
3Ø-200v-50Hz, 2.2Kw
ASCENT TIME Approx. 300seconds
ABILITY 4,000 Kg LIFT 1,700mm
3Ø-200v-50Hz, 2.2Kw
ASCENT TIME Approx. 55seconds
ABILITY 45 ton LIFT 1,300mm
3Ø-200v-50Hz, 2.2Kw x 3 3Ø-200v-50Hz, 0.4Kw x 2
ABILITY 3,000 Kg LIFT 1,700mm
3Ø-200v-50Hz, 2.2Kw
ABILITY 3,000 Kg LIFT 1,700mm ELECTRIC MOTOR 3Ø-200v-50Hz, 2.2Kw
ABILITY (1st STEP) 14 ton ABILITY (2nd STEP) 14 ton LIFT 1,500mm ELECTRIC MOTOR 3Ø-200v-50Hz, 2.2Kw x 2 ELECTRIC MOTOR 3Ø-200v-50Hz, 0.2Kw
4 TON HYDRAULIC PIT LIFT, Banzai Co., Ltd
10 TON PIT LIFT, Banzai Co., Ltd
4 TON HYDRAULIC LIFT, Banzai Co., Ltd
45 TON PIT TYPE FLOOR LIFT, Banzai Co., Ltd
ELECTRIC MOTOR
BLDG 4125
ELECTRIC MOTOR
3 UNITS
2 UNITS
1 UNIT
1 UNIT
28 TON PIT TYPE FLOOR LIFT, Banzai Co., Ltd
3 TON TWO POST LIFT, Banzai Co., Ltd
3 TON HYDRAULIC LIFT, Banzai Co., Ltd
Info provided at site visit
ELECTRIC MOTOR
ELECTRIC MOTOR
ELECTRIC MOTOR
ELECTRIC MOTOR
1 UNIT
2 UNITS
(one lift under Hunter lift is NOT a part of this requirement)
1 UNIT
ABILITY MAX 4536 KG
TABLE DIMENSIONS 4673 MM
MAXIMUM HEIGHT 1829 MM
MINIMUM HEIGHT 222 MM
LIFT
ELECTRIC MOTOR 208/230V, 1PH, 60HZ
ASCENT TIME
DECENT TIME
CYLENDER
PUMP
ABILITY MAX 6350 KG
TABLE DIMENSIONS 6170 MM X 3300 MM
MAXIMUM HEIGHT 1970 MM
MINIMUM HEIGHT 196 MM
LIFT 4 POST LIFT
ELECTRIC MOTOR 220 VAC, 1PH, 60HZ
ASCENT TIME
DECENT TIME
CYLENDER
PUMP
ABILITY 1,500 Kg TABLE DIMENSIONS 1100 x 9000 MAXIMUM HEIGHT 2,600mm MINIMUM HEIGHT 800mm LIFT 1,800mm
3Ø-200v-50Hz, 3.7Kw
CYLINDER 80mmdia. x 550st x 4 pieces
140Kg/cm², 12.7L/min
ABILITY 45 ton LIFT 1,300mm
3Ø-200v-50Hz, 2.2Kw x 3 3Ø-200v-50Hz, 0.4Kw x 2
45 TON PIT TYPE FLOOR LIFT, Banzai Co., Ltd
BLDG 4125
BLDG 4127
1 UNIT
ELECTRIC MOTOR
ELECTRIC MOTOR
1 UNIT
ELECTRIC MOTOR
WORK LIFT, Banzai Co., Ltd
WORK LIFT, HUNTER (RX45)
4 POST LIFT WORK LIFT, BENDPAK HDS (14X)
No obstables, truck access OK
PUMP
BLDG NO. ITEM DESCRIPTION CAPACITY
85 Electric Driven Type (Mitsubishi-denki) 3 ton x 1 ea
Electric Driven Type (Kito) 0.5 ton x 10 ea
Electric Driven Type (Kito) 5 ton x 2 ea
HOIST
610 Electric Driven Type (Kito) 4 ton (8000 lbs.) x 2 ea
702 Electirc Driven Type (Kito) 3 ton x 1 ea
Manual Type Elephant Chain Block 1.6 ton x 1 ea
Manual Type 0.5 ton x 1 ea
756 (Electrical Systems) Electric Driven Type (Hitachi) 2 ton x 2 ea
756 (Power Production) Electric Driven Type (Mitsubishi-denki) 7.5 ton x 1 ea
804 (2nd FL) Electric Driven Type (Kito) 0.5 ton x 2 ea
804 (Roof-top) Electric Driven Type Kito (Jib crane) 0.5 ton x 1 ea
Electric Driven Type 2 ton x 2 ea Manual Type 2 ton x 2 ea
912 Electric Driven Type (Kito) 2.0 ton 1 EA
934 Electric Driven Type (Kito) 2.4 ton x 1 ea
Info Provided at site visit907
1221 Electric Driven Type (Kito) 0.5 ton x 1 ea
1585 (2nd FL) Electric Driven Type (Kito) 1 ton x 1 ea
1587 Electric Driven Type (Kito)Explosion Proof 2.5 ton x 1 ea
4100 Manual Type 2 ton x 2 ea
4125 Electric Driven Type 3 ton x 2 ea
4127 Electric Driven Type (Mitsubishi-denki) 3 ton x 1 ea
4155 Electric Driven Type 1.5 ton x 1 ea
Info Provided at site visit
BLDG NO. ITEM DESCRIPTION CAPACITY
TAMA SA
Electric Driven Type 0.5 ton x 1 ea
Manual Type 0.8 ton x 1 ea
1010 Electric Driven Type 1.5 ton x 1 ea
HOIST
BLDG NO.
ABILITY 17,500 KG
TABLE DIMENSIONS 4673 MM
MAXIMUM HEIGHT 1829 MM
MINIMUM HEIGHT 222 MM
LIFT
ELECTRIC MOTOR 208/230V, 1PH, 60HZ
ASCENT TIME
DECENT TIME
CYLENDER
PUMP
TYPE
HYDRAULIC VEHICLE LIFT
WORK LIFT, Stertil KONI (ST4175)
BLDG 85
| Q&A |
| Info |
| Pics |
File details come from the government source that posted it. Updated .