JA-9_Appx_5_Control_Panel.pdf

MAINTAIN TURBINE-GENERATOR #5 APPENDIX 5

FTQW 19-1018 NEW CONTROL PANEL, 2013

NEW CONTROL PANEL

APPENDIX 5

CSE Job #12137 CSE Engineering, Inc.

1900 Bates Ave, Suite K

Concord, CA 94520

Sep 2013

Central Heat and Power Plant

2676 Industrial Ave.

Eielson Air Force Base, AK 99702

In the course of our work, contained within this binder are the documents used to properly reconstruct turbine control panel #5. Within are the product information and the drawings of the circuit logic the control systems used to operate turbine #5. However, in most cases, we did not verify the accuracy of the existing drawings.

TURBINE 5

TETRAD SERVICES, INC.

PO BOX 8099, Red Bluff, CA 96080

TG5 Control Panel Layout

TG5 Control Panel Upgrade Powerhouse, Eielson AFB, AK

Tag Description Manufacturer Model Notes

PI 502 GAUGE: 8" Face (0-1000 PSIG) Weschler 8BR4PPAK1XAXXXT Main Steam Pressure

PI 523 GAUGE: 8" Face (0-300 PSIG) Weschler 8BR4PPAK1XAXXXT Main Oil Pressure

PI 528 GAUGE: 8" Face (40 inH2O-15 PSIG) Weschler 8SR4PPAK1XAXXXT Gland Seal Condenser

PI 525 GAUGE: 8" Face (0-300 PSIG) Weschler 8BR4PPAK1XAXXXT Control Oil Pressure

PI 522 GAUGE: 8" Face (30 inHg-15 PSIG) Weschler 8HR4PPAK1XAXXXT Exhaust Vacuum

TI 550 GAUGE: 8" Face (50-750 F) Weschler 8BR4PPAK1XAXXXT Main Steam Temperature

PI 507 GAUGE: 8" Face (0-500 PSIG) Weschler 8BR4PPAK1XAXXXT Steam Chest Pressure

PI 524 GAUGE: 8" Face (0-300 PSIG) Weschler 8BR4PPAK1XAXXXT Power Oil Pressure

PI 542 GAUGE: 8" Face (0-30 PSIG) Weschler 8BR4PPAK1XAXXXT Circ Water Header

PI 533 GAUGE: 8" Face (0-60 PSIG) Weschler 8BR4PPAK1XAXXXT Condensate Pump Discharge

PI 526 GAUGE: 8" Face (0-60 PSIG) Weschler 8BR4PPAK1XAXXXT Lube Oil Pressure

PI 509 GAUGE: 8" Face (0-500 PSIG) Weschler 8BR4PPAK1XAXXXT First Stage Pressure

PI 511 GAUGE: 8" Face (0-200 PSIG) Weschler 8BR4PPAK1XAXXXT Extraction Pressure

PI 527 GAUGE: 8" Face (0-30 PSIG) Weschler 8BR4PPAK1XAXXXT Steam Seal

TI 551 GAUGE: 8" Face (50-250 PSIG) Weschler 8BR4PPAK1XAXXXT Hotwell Temperature

PT 502 Pressure Transmitter (0-1000 PSIG) Noshok 100-1000-1-1-2-1-ORF Main Steam Pressure

PT 507 Pressure Transmitter (0-500 PSIG) Noshok 100-500-1-1-2-1-ORF Steam Chest Pressure

PT 509 Pressure Transmitter (0-500 PSIG) Noshok 100-500-1-1-2-1-ORF First Stage Pressure

PT 511 Pressure Transmitter (0-200 PSIG) Noshok 100-200-1-1-2-1-ORF Extraction Pressure

PT 523 Pressure Transmitter (0-300 PSIG) Noshok 100-300-1-1-2-1-ORF Main Oil Pressure

PT 524 Pressure Transmitter (0-300 PSIG) Noshok 100-300-1-1-2-1-ORF Power Oil Pressure

PT 525 Pressure Transmitter (0-300 PSIG) Noshok 100-300-1-1-2-1-ORF Control Oil Pressure

PT 542 Pressure Transmitter (0-30 PSIG) Noshok 100-30-1-1-2-1-ORF Circ Water Header

PT 527 Pressure Transmitter (0-30 PSIG) Noshok 100-30-1-1-2-1-ORF Steam Seal

PT 533 Pressure Transmitter (0-60 PSIG) Noshok 100-60-1-1-2-1-ORF Condensate Pump Discharge

PT 526 Pressure Transmitter (0-60 PSIG) Noshok 100-60-1-1-2-1-ORF Lube Oil Pressure

PT 528 Pressure Transmitter (30 inHG - 15 PSIG) Noshok 100-30/15-1-1-2-1-ORF Gland Seal Condenser

PT 522 Pressure Transmitter (30 inHG - 15 PSIG) Noshok 100-30/15-1-1-2-1-ORF Exhaust Vacuum

TT 550 Temperature Transmitter Omega TX901 Main Steam Temperature

TT 551 Temperature Transmitter Omega TX901 Hotwell Temperature

1" Thermowell, socket weld, 304 SS, 2 1/2" insertion length, 4" overall length Omega 1-260W-u21/2-304SS

Type E termocouple assembly, 4" long, ungrounded, cast iron head Omega

NB1-CXSS-14U-4

4.5" Switchboard Digital/Analog (0-150VDC) Crompton 007-DIVA-PZPZ-A2 EMD Meter

Totalizer Meter Eaton 6-Y-41346-406-ME Total Run Time/Total Condesate Return

Annunciator 2x11 window Ametek 90A-PM-2H-11W-NPB-1E-22-W-A-RR-B-X-TP

Keyboard Hoffman Enclosures CCKBD

Bill of Materials

Programmer: Marc Perez Document #: CSE12137-11 Rev: 0 Date: 8/30/2013

Configuration: 'C:\Program Files\Ametek Applications\Annunciator Configurator\CSE12137-Eielson AFB TG5.anc' Today's Date: 8/30/2013 8:48:02 AM Serial Number: R1361452 File Format: 9

Alarm No Input Delay Group Relay Group Relay Mode Input Normally Open/Closed Data Direction 1 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 2 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 3 0.050 1 Critical Follows Input Contact - Normally Energised Hardwired Normally Closed 4 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 5 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 6 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 7 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 8 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 9 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 10 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Open 11 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Open 12 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 13 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 14 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 15 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 16 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Open 17 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 18 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 19 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 20 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 21 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Closed 22 0.050 1 Critical Follows Input Contact - Normally De-energised Hardwired Normally Open

Input Delay Resolution 50 milliseconds

Fast Response No

Alarm Group Sequence

1 AM

2 AM

3 AM

4 AM

CSM Relay Mode Function 1 Normally De-energised Critical Horn 2 Normally De-energised Non-critical Horn 3 Normally De-energised Non-critical Horn 4 Normally De-energised Non-critical Horn

Fast On 0.40 Fast Off 0.40 Slow On 0.40 Slow Off 0.40 Intermittant On 0.40 Intermittant Off 0.40 Intermittant Period On 0.80 Intermittant Period Off 0.80

Auto Acknowledge No Auto Reset No Control Interlock No Non-critical Audible Pulsed No Ringback Audible Pulsed No Critical Audible does not affect Non-critical No Audible On Test Yes Relays On Test No Lamp Test Only Yes Separate First Out Ack No Critical Audible Pulsed No

System ID SERIES90A Annunciator Type SERIES90A System Height 2 System Width 11 Hardwired Inputs 22 Integral Pushbuttons No Single Input I/O Board No Flash Synch Master Enabled Yes Dual Relay No

Cost Options Modbus Communication No CSM Relay Upgrade No Pushbutton Upgrade No DNP Communication No Ethernet Communication No Auto Horn Silence No Internal Horn No Fast Response No ASCII Communication No SER Upgrade No

Alarm Points per module Module 1 1 Module 2 1 Module 3 1 Module 4 1 Module 5 1 Module 6 1 Module 7 1 Module 8 1 Module 9 1 Module 10 1 Module 11 1 Module 12 1 Module 13 1 Module 14 1 Module 15 1 Module 16 1 Module 17 1 Module 18 1 Module 19 1 Module 20 1 Module 21 1 Module 22 1

Time-Tested Durability, Industry Proven A Legacy of Leadership

SPECIALTY DEVICES

POTENTIOMETER UNITS

MECHANICALLY INTERLOCKED

MAINTAINED PUSH BUTTONS

CYLINDER LOCK PUSH BUTTONS (800T ONLY)

CLUSTER PILOT

LIGHTS 800T ONLY

1234 WAY TOGGLE

SWITCHES 800T ONLY

MOMENTARY

WOBBLE STICK

UNITS 800T ONLY

MOMENTARY PADLOCKING

MUSHROOM HEAD

PUSH BUTTONS 800T ONLY

SELECTOR

PUSH BUTTON

UNITS 800T ONLY

MOMENTARY CONTACT FLIP LEVER

PUSH BUTTONS 800H ONLY

Copyright © 2011 Rockwell Automation. All rights reserved. Printed in USA. Publication 800T-BR012B-EN-P – August 2011 Supersedes Publication 800T-BR012A-EN-P – January 2009

ASSEMBLED STATIONS

For a full product offering, please refer to the Industrial Controls catalog or contact your local Rockwell Automation sales office or

Allen-Bradley distributor. You can also visit our website at: www.ab.com/components.

• Designed to worldwide standards.

IMITATED, BUT NEVER DUPLICATED

FAST, EASY INSTALLATION

The Allen-Bradley Bulletin 800T and 800H push button product lines are in a class by themselves. They are designed and constructed to perform in the most demanding industrial environments. Bold yet functional, rugged yet attractive, Allen-Bradley’s 30.5 mm push buttons represent the world’s most innovative and unique offering.

WORLDWIDE SOLUTIONS SWITCHING SAFETY

Selector Switches

• Positive detent - prevents the switch from hanging up between positions

• Constant energy - minimizes accidental switching to an unwanted change in contact state

Solid-Color Button Cap - thermoplastic polyester resin delivers excellent resistance to corrosive agents/color identification is never lost (no insert to lose)

Actuator Shaft - rugged, dependable performance assured by zinc alloy casting

Return Spring - stainless steel formed wire delivers consistent operation and long life

Operator - with factory installed contact blocks

Gaskets -provide type 4/13 ingress protection

Legend plate

Mounting ring

Thrust washer -with anti-turn tab

Operator Bushing - die cast zinc alloy gives strength and stability in installation

Diaphragm Seal - provides a complete blanket of protection from liquids, particles and corrosive agents

Riveted Construction - operator bushing, diaphragm seal and base plate are secured together by four steel rivets, providing durability and tamper resistance

ADVANCED SWITCHING FUNCTIONALITY

LOGIC REED BLOCKS MINI BLOCKS MAXDUTY™ BLOCKS SNAP ACTION &

TIME DELAY BLOCKS

STACKABLE SEALED

SWITCH BLOCKS

Allen-Bradley’s wide range of contact blocks, offering features and capabilities found no where else in the industry, can address more applications and environments.

STANDARD CONTACT BLOCKS

• 10 A max., A600 rated – for general purpose use

• Flexible bifurcated spanner provides increased contact reliability

• Pure fine silver contacts resist corrosion

• Self-lifting saddle clamps simplify wiring

• Clear side plates allow easy inspection of contacts

• Optional color-coded finger safe (IP2X) versions

SEALED SWITCH CONTACT BLOCKS

• Rated for Division 2 / Zone 2 hazardous locations

• 5 A max., B600 Rated

• Hermetically sealed glass enclosed contacts provide reliable switching in highly contaminated and corrosive environments

• Contacts are constructed with tungsten, which has excellent resistance to welding

PENTUFF™ CONTACT BLOCKS

• 2.5 A max., C300 rated

• Low voltage switching reliability to 5V DC, 1 mA – ideal for interfacing with programmable logic controller input circuits

• Direct drive pentafurcated contact design

• Spanner made from corrosion resistant inert precious metals

• Optional finger-safe (IP2X) versions

SELFMONITORING™ CONTACT BLOCKS

• Ensures that the normally closed contacts will open when the E-stop is actuated

• 10 A max., A600 rated

• Bifurcated spanner with pure fine silver contacts

• Color-coded yellow for easy identification

• IP2X finger safe protection standard

TYPE 4/13 800T TYPE 4/4X/13 800H

DIE CAST ALUMINUM STAINLESS STEEL GLASS POLYESTER

BOOTED OPERATOR BOOTED OPERATOR

CONFIGURATION BUTTON LEGEND MARKING

COLOR

ONE STOP 800T-1TA 800H-1HA4T 800H-1HA4R

PUSH BUTTON START 800T-1TB 800H-1HB4T 800H-1HB4R

EMERG. STOP 800T-1TYM — —

BREAK GLASS 800T-NX114 — —

TWO START 800T-2TA 800H-2HA4T 800H-2HA4R

PUSH BUTTONS STOP

3POSITION HAND-OFF-AUTO 800T-R3TA — —

SELECTOR SWITCH

Normal Operation

Actuated Button

Improperly Installed

Note: X = Closed 0 = Open

800TC-XD4S

30.5 mm 800T/H

800T-BR012B-EN-P.qxp:Layout 1 8/23/11 5:48 PM Page 1

SPECIALTY DEVICES

POTENTIOMETER UNITS

MECHANICALLY INTERLOCKED

MAINTAINED PUSH BUTTONS

CYLINDER LOCK PUSH BUTTONS (800T ONLY)

CLUSTER PILOT

LIGHTS 800T ONLY

1234 WAY TOGGLE

SWITCHES 800T ONLY

MOMENTARY

WOBBLE STICK

UNITS 800T ONLY

MOMENTARY PADLOCKING

MUSHROOM HEAD

PUSH BUTTONS 800T ONLY

SELECTOR

PUSH BUTTON

UNITS 800T ONLY

MOMENTARY CONTACT FLIP LEVER

PUSH BUTTONS 800H ONLY

Copyright © 2011 Rockwell Automation. All rights reserved. Printed in USA. Publication 800T-BR012B-EN-P – August 2011 Supersedes Publication 800T-BR012A-EN-P – January 2009

ASSEMBLED STATIONS

For a full product offering, please refer to the Industrial Controls catalog or contact your local Rockwell Automation sales office or

Allen-Bradley distributor. You can also visit our website at: www.ab.com/components.

• Designed to worldwide standards.

IMITATED, BUT NEVER DUPLICATED

FAST, EASY INSTALLATION

The Allen-Bradley Bulletin 800T and 800H push button product lines are in a class by themselves. They are designed and constructed to perform in the most demanding industrial environments. Bold yet functional, rugged yet attractive, Allen-Bradley’s 30.5 mm push buttons represent the world’s most innovative and unique offering.

WORLDWIDE SOLUTIONS SWITCHING SAFETY

Selector Switches

• Positive detent - prevents the switch from hanging up between positions

• Constant energy - minimizes accidental switching to an unwanted change in contact state

Solid-Color Button Cap - thermoplastic polyester resin delivers excellent resistance to corrosive agents/color identification is never lost (no insert to lose)

Actuator Shaft - rugged, dependable performance assured by zinc alloy casting

Return Spring - stainless steel formed wire delivers consistent operation and long life

Operator - with factory installed contact blocks

Gaskets -provide type 4/13 ingress protection

Legend plate

Mounting ring

Thrust washer -with anti-turn tab

Operator Bushing - die cast zinc alloy gives strength and stability in installation

Diaphragm Seal - provides a complete blanket of protection from liquids, particles and corrosive agents

Riveted Construction - operator bushing, diaphragm seal and base plate are secured together by four steel rivets, providing durability and tamper resistance

ADVANCED SWITCHING FUNCTIONALITY

LOGIC REED BLOCKS MINI BLOCKS MAXDUTY™ BLOCKS SNAP ACTION &

TIME DELAY BLOCKS

STACKABLE SEALED

SWITCH BLOCKS

Allen-Bradley’s wide range of contact blocks, offering features and capabilities found no where else in the industry, can address more applications and environments.

STANDARD CONTACT BLOCKS

• 10 A max., A600 rated – for general purpose use

• Flexible bifurcated spanner provides increased contact reliability

• Pure fine silver contacts resist corrosion

• Self-lifting saddle clamps simplify wiring

• Clear side plates allow easy inspection of contacts

• Optional color-coded finger safe (IP2X) versions

SEALED SWITCH CONTACT BLOCKS

• Rated for Division 2 / Zone 2 hazardous locations

• 5 A max., B600 Rated

• Hermetically sealed glass enclosed contacts provide reliable switching in highly contaminated and corrosive environments

• Contacts are constructed with tungsten, which has excellent resistance to welding

PENTUFF™ CONTACT BLOCKS

• 2.5 A max., C300 rated

• Low voltage switching reliability to 5V DC, 1 mA – ideal for interfacing with programmable logic controller input circuits

• Direct drive pentafurcated contact design

• Spanner made from corrosion resistant inert precious metals

• Optional finger-safe (IP2X) versions

SELFMONITORING™ CONTACT BLOCKS

• Ensures that the normally closed contacts will open when the E-stop is actuated

• 10 A max., A600 rated

• Bifurcated spanner with pure fine silver contacts

• Color-coded yellow for easy identification

• IP2X finger safe protection standard

TYPE 4/13 800T TYPE 4/4X/13 800H

DIE CAST ALUMINUM STAINLESS STEEL GLASS POLYESTER

BOOTED OPERATOR BOOTED OPERATOR

CONFIGURATION BUTTON LEGEND MARKING

COLOR

ONE STOP 800T-1TA 800H-1HA4T 800H-1HA4R

PUSH BUTTON START 800T-1TB 800H-1HB4T 800H-1HB4R

EMERG. STOP 800T-1TYM — —

BREAK GLASS 800T-NX114 — —

TWO START 800T-2TA 800H-2HA4T 800H-2HA4R

PUSH BUTTONS STOP

3POSITION HAND-OFF-AUTO 800T-R3TA — —

SELECTOR SWITCH

Normal Operation

Actuated Button

Improperly Installed

Note: X = Closed 0 = Open

800TC-XD4S

30.5 mm

SPECIALTY DEVICES

POTENTIOMETER UNITS

MECHANICALLY INTERLOCKED

MAINTAINED PUSH BUTTONS

CYLINDER LOCK PUSH BUTTONS (800T ONLY)

CLUSTER PILOT

LIGHTS 800T ONLY

1234 WAY TOGGLE

SWITCHES 800T ONLY

MOMENTARY

WOBBLE STICK

UNITS 800T ONLY

MOMENTARY PADLOCKING

MUSHROOM HEAD

PUSH BUTTONS 800T ONLY

SELECTOR

PUSH BUTTON

UNITS 800T ONLY

MOMENTARY CONTACT FLIP LEVER

PUSH BUTTONS 800H ONLY

Copyright © 2011 Rockwell Automation. All rights reserved. Printed in USA. Publication 800T-BR012B-EN-P – August 2011 Supersedes Publication 800T-BR012A-EN-P – January 2009

ASSEMBLED STATIONS

For a full product offering, please refer to the Industrial Controls catalog or contact your local Rockwell Automation sales office or

Allen-Bradley distributor. You can also visit our website at: www.ab.com/components.

• Designed to worldwide standards.

IMITATED, BUT NEVER DUPLICATED

FAST, EASY INSTALLATION

The Allen-Bradley Bulletin 800T and 800H push button product lines are in a class by themselves. They are designed and constructed to perform in the most demanding industrial environments. Bold yet functional, rugged yet attractive, Allen-Bradley’s 30.5 mm push buttons represent the world’s most innovative and unique offering.

WORLDWIDE SOLUTIONS SWITCHING SAFETY

Selector Switches

• Positive detent - prevents the switch from hanging up between positions

• Constant energy - minimizes accidental switching to an unwanted change in contact state

Solid-Color Button Cap - thermoplastic polyester resin delivers excellent resistance to corrosive agents/color identification is never lost (no insert to lose)

Actuator Shaft - rugged, dependable performance assured by zinc alloy casting

Return Spring - stainless steel formed wire delivers consistent operation and long life

Operator - with factory installed contact blocks

Gaskets -provide type 4/13 ingress protection

Legend plate

Mounting ring

Thrust washer -with anti-turn tab

Operator Bushing - die cast zinc alloy gives strength and stability in installation

Diaphragm Seal - provides a complete blanket of protection from liquids, particles and corrosive agents

Riveted Construction - operator bushing, diaphragm seal and base plate are secured together by four steel rivets, providing durability and tamper resistance

ADVANCED SWITCHING FUNCTIONALITY

LOGIC REED BLOCKS MINI BLOCKS MAXDUTY™ BLOCKS SNAP ACTION &

TIME DELAY BLOCKS

STACKABLE SEALED

SWITCH BLOCKS

Allen-Bradley’s wide range of contact blocks, offering features and capabilities found no where else in the industry, can address more applications and environments.

STANDARD CONTACT BLOCKS

• 10 A max., A600 rated – for general purpose use

• Flexible bifurcated spanner provides increased contact reliability

• Pure fine silver contacts resist corrosion

• Self-lifting saddle clamps simplify wiring

• Clear side plates allow easy inspection of contacts

• Optional color-coded finger safe (IP2X) versions

SEALED SWITCH CONTACT BLOCKS

• Rated for Division 2 / Zone 2 hazardous locations

• 5 A max., B600 Rated

• Hermetically sealed glass enclosed contacts provide reliable switching in highly contaminated and corrosive environments

• Contacts are constructed with tungsten, which has excellent resistance to welding

PENTUFF™ CONTACT BLOCKS

• 2.5 A max., C300 rated

• Low voltage switching reliability to 5V DC, 1 mA – ideal for interfacing with programmable logic controller input circuits

• Direct drive pentafurcated contact design

• Spanner made from corrosion resistant inert precious metals

• Optional finger-safe (IP2X) versions

SELFMONITORING™ CONTACT BLOCKS

• Ensures that the normally closed contacts will open when the E-stop is actuated

• 10 A max., A600 rated

• Bifurcated spanner with pure fine silver contacts

• Color-coded yellow for easy identification

• IP2X finger safe protection standard

TYPE 4/13 800T TYPE 4/4X/13 800H

DIE CAST ALUMINUM STAINLESS STEEL GLASS POLYESTER

BOOTED OPERATOR BOOTED OPERATOR

CONFIGURATION BUTTON LEGEND MARKING

COLOR

ONE STOP 800T-1TA 800H-1HA4T 800H-1HA4R

PUSH BUTTON START 800T-1TB 800H-1HB4T 800H-1HB4R

EMERG. STOP 800T-1TYM — —

BREAK GLASS 800T-NX114 — —

TWO START 800T-2TA 800H-2HA4T 800H-2HA4R

PUSH BUTTONS STOP

3POSITION HAND-OFF-AUTO 800T-R3TA — —

SELECTOR SWITCH

Normal Operation

Actuated Button

Improperly Installed

Note: X = Closed 0 = Open

800TC-XD4S

30.5 mm

BUTTON LEGEND LEGEND HEAD TYPE

COLOR COLOR

START FLUSH 800T-A103WA 800H-AR103WA

STOP EXTENDED 800T-B604WA 800H-BR604WA

I FLUSH 800T-A101WA 800H-AR101WA

O EXTENDED 800T-B602WA 800H-BR602WA

FORWARD FLUSH 800T-A210WA 800H-AR210WA

REVERSE FLUSH 800T-A210WA 800H-AR210WA

JOG FLUSH 800T-A212WA 800H-AR212WA

UP FLUSH 800T-A213WA 800H-AR213WA

DOWN FLUSH 800T-A214WA 800H-AR214WA

R FLUSH 800T-A711WA 800H-AR711WA

PUSH BUTTON DEVICES PILOT LIGHT DEVICES SELECTOR SWITCH DEVICES

MOMENTARY CONTACT PUSH BUTTONS, NONILLUMINATED 2POSITION SELECTOR SWITCHES, NONILLUMINATED 3POSITION SELECTOR SWITCHES, NONILLUMINATED

4POSITION SELECTOR SWITCHES, NONILLUMINATED

3POSITION SELECTOR SWITCHES, ILLUMINATED

2POSITION SELECTOR SWITCHES, ILLUMINATED

MOMENTARY CONTACT PUSH BUTTONS, NONILLUMINATED WITH 2 COLOR MOLDED LEGEND CAP

MOMENTARY CONTACT PUSH BUTTONS, ILLUMINATED

2POSITION PUSHPULL AND PUSHPULL/TWIST RELEASE, NONILLUMINATED 2POSITION PUSHPULL AND PUSHPULL/TWIST RELEASE, ILLUMINATED

CONTACT

CONFIGURATION

1 N.O. 1 N.C.

1 N.O. 1 N.C.

1 N.O. 1 N.C.

Maintained Out In

O X X O

Maintained Out In X O

EMERGENCY-STOP & PUSH-PULL DEVICES

For a full product offering, please refer to the Industrial Controls catalog or contact your local Rockwell Automation sales office or Allen-Bradley distributor.

You can also visit our website at: www.ab.com/components.

TYPE 4/13 METAL 800T TYPE 4/4X/13

OPERATOR PLASTIC 800H

POSITION RED PUSHPULL RED PUSHPULL/ RED PUSHPULL/

TWIST RELEASE TWIST RELEASE

TYPE

• UNIVERSAL LED

• 12130V AC/DC

• 1 N.O. 1 N.C.L.B. 800T-FXQH2RA1 800T-FXJEQH2RA1 800T-FXTQH2RA1 800HFRXTQH2RA1

• TRANSFORMER

• LED

• 120V AC, 50/60 HZ

800T-FXPH16RA1 800T-FXJEPH16RA1 800T-FXTPH16RA1 800H-FRXTPH16RA1

• 1 N.O. 1 N.C.L.B.

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

STANDARD KNOB KNOB LEVER CYLINDER LOCK STANDARD KNOB

CONTACT

CONFIGURATION OPERATOR TYPE

800T-H2A 800T-H17A 800T-H33A 800H-HR2A

1 N.O. 1 N.C. 800T-H4A 800T-H18A 800T-H42A 800H-HR4A

800T-H5A 800T-H19A 800T-H48A 800H-HR5A

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

STANDARD KNOB KNOB LEVER CYLINDER LOCK STANDARD KNOB

CONTACT

CONFIGURATION OPERATOR TYPE

800T-N2KF4B 800T-N17KF4B 800T-N33KF4B 800H-NR2KF4B

2 N.O. 2 N.C. 800T-N3KF4B 800T-N29KF4B 800T-N133KF4B 800H-NR3KF4B

800T-N9KF4B 800T-N30KF4B 800T-N233KF4B 800H-NR9KF4B

TYPE 4/13 TYPE 4/4X/13

METAL 800T PLASTIC 800H

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

CONTACT OPERATOR RED PUSHPULL RED PUSHPULL RED PUSHPULL/ RED PUSH PULL/

CONFIGURATION POSITION TWIST RELEASE TWIST RELEASE

S.M.C.B.

800TC-FXLE6D4S

N.C.L.B.

800T-FX6D4 800T-FXT6D4 800H-FRXT6D4

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

STANDARD TYPE PUSHTOTEST STANDARD TYPE PUSHTOTEST

TYPE COLOR

• UNIVERSAL LED 800T-QH2R 800T-QTH2R 800H-QRH2R 800H-QRTH2R

• 12130V AC/DC 800T-QH2G 800T-QTH2G 800H-QRH2G 800H-QRTH2G

800T-QH2A 800T-QTH2A 800H-QRH2A 800H-QRTH2A

• TRANSFORMER 800T-PH16R 800T-PTH16R 800H-PRH16R 800H-PRTH16R

• LED 800T-PH16G 800T-PTH16G 800H-PRH16G 800H-PRTH16G

• 120V AC, 50/60 HZ 800T-PH16A 800T-PTH16A 800H-PRH16A 800H-PRTH16A

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

STANDARD KNOB STANDARD KNOB

TYPE OPERATOR TYPE

• UNIVERSAL LED 800T-2HRH2KB6AX 800H-2HRRH2KB6AX

• 12-130V AC/DC 800T-2HRH4KL8AX 800H-2HRRH4KL8AX

• RED KNOB

800T-2HRH5KL8AX 800H-2HRRH5KL8AX• 1 N.O. - 1 N.C.

• TRANSFORMER 800T-16HRH2KB6AX 800H-16HRRH2KB6AX

• RED LED 800T-16HRH4KL8AX 800H-16HRRH4KL8AX

• 120V AC, 50/60 HZ

800T-16HRH5KL8AX 800H-16HRRH5KL8AX• 1 N.O. - 1 N.C .

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

STANDARD KNOB STANDARD KNOB

TYPE OPERATOR TYPE

• UNIVERSAL LED 800T-2JRH2KB7AX 800H-2JRRH2KB7AX

• 12-130V AC/DC 800T-2JRH4KB7AX 800H-2JRRH4KB7AX

• RED KNOB

800T-2JRH5KB7AX 800H-2JRRH5KB7AX• 1 N.O. - 1 N.C.

• TRANSFORMER 800T-16JRH2KB7AX 800H-16JRRH2KB7AX

• RED LED 800T-16JRH4KB7AX 800H-16JRRH4KB7AX

• 120V AC, 50/60 HZ

800T-16JRH5KB7AX 800H-16JRRH5KB7AX• 1 N.O. - 1 N.C.

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

EXTENDED HEAD EXTENDED HEAD EXTENDED HEAD EXTENDED HEAD

WITHOUT GUARD WITH GUARD WITHOUT GUARD WITH GUARD

TYPE COLOR

• UNIVERSAL LED 800T-QBH2R 800T-QAH2R 800H-QRBH2R 800H-QRAH2R

• 12130V AC/DC 800T-QBH2G 800T-QAH2G 800H-QRBH2G 800H-QRAH2G

• 1 N.O. 1 N.C. 800T-QBH2A 800T-QAH2A 800H-QRBH2A 800H-QRAH2A

• TRANSFORMER 800T-PBH16R 800T-PAH16R 800H-PRBH16R 800H-PRAH16R

• LED 800T-PBH16G 800T-PAH16G 800H-PRBH16G 800H-PRAH16G

• 120V AC, 50/60 HZ 800T-PBH16A 800T-PAH16A 800H-PRBH16A 800H-PRAH16A

• 1 N.O. 1 N.C.

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

FLUSH HEAD EXTENDED HEAD BOOTLESS FLUSH HEAD BOOTED

CONTACT

CONFIGURATION COLOR

1 N.O. 800T-A1D1 800T-B1D1 800H-AR1D1 800H-R1D1

800T-A2D1 800T-B2D1 800H-AR2D1 800H-R2D1

800T-A6D1 800T-B6D1 800H-AR6D1 800H-R6D1

1 N.C. 800T-A1D2 800T-B1D2 800H-AR1D2 800H-R1D2

800T-A2D2 800T-B2D2 800H-AR2D2 800H-R2D2

800T-A6D2 800T-B6D2 800H-AR6D2 800H-R6D2

1 N.O. 1 N.C. 800T-A1A 800T-B1A 800H-AR1A 800H-R1A

800T-A2A 800T-B2A 800H-AR2A 800H-R2A

800T-A6A 800T-B6A 800H-AR6A 800H-R6A

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

STANDARD KNOB KNOB LEVER CYLINDER LOCK STANDARD KNOB

CONTACT

CONFIGURATION OPERATOR TYPE

800T-J2A 800T-J17A 800T-J42A 800H-JR2A

1 N.O. 1 N.C. 800T-J4A 800T-J18A 800T-J50A 800H-JR4A

800T-J5A 800T-J19A 800T-J38A 800H-JR5A

800T-J91A 800T-J20A 800T-J631A 800H-JR91A

800T-BR012B-EN-P.qxp:Layout 1 8/23/11 5:48 PM Page 2

START FLUSH 800T-A103WA 800H-AR103WA

STOP EXTENDED 800T-B604WA 800H-BR604WA

I FLUSH 800T-A101WA 800H-AR101WA

O EXTENDED 800T-B602WA 800H-BR602WA

FORWARD FLUSH 800T-A210WA 800H-AR210WA

REVERSE FLUSH 800T-A210WA 800H-AR210WA

JOG FLUSH 800T-A212WA 800H-AR212WA

UP FLUSH 800T-A213WA 800H-AR213WA

DOWN FLUSH 800T-A214WA 800H-AR214WA

R FLUSH 800T-A711WA 800H-AR711WA

PUSH BUTTON DEVICES PILOT LIGHT DEVICES SELECTOR SWITCH DEVICES

MOMENTARY CONTACT PUSH BUTTONS, NONILLUMINATED 2POSITION SELECTOR SWITCHES, NONILLUMINATED 3POSITION SELECTOR SWITCHES, NONILLUMINATED

4POSITION SELECTOR SWITCHES, NONILLUMINATED

3POSITION SELECTOR SWITCHES, ILLUMINATED

2POSITION SELECTOR SWITCHES, ILLUMINATED

MOMENTARY CONTACT PUSH BUTTONS, NONILLUMINATED WITH 2 COLOR MOLDED LEGEND CAP

MOMENTARY CONTACT PUSH BUTTONS, ILLUMINATED

2POSITION PUSHPULL AND PUSHPULL/TWIST RELEASE, NONILLUMINATED 2POSITION PUSHPULL AND PUSHPULL/TWIST RELEASE, ILLUMINATED

CONTACT

CONFIGURATION

1 N.O. 1 N.C.

1 N.O. 1 N.C.

1 N.O. 1 N.C.

Maintained Out In

O X X O

Maintained Out In X O

EMERGENCY-STOP & PUSH-PULL DEVICES

For a full product offering, please refer to the Industrial Controls catalog or contact your local Rockwell Automation sales office or Allen-Bradley distributor.

You can also visit our website at: www.ab.com/components.

TYPE 4/13 METAL 800T TYPE 4/4X/13

OPERATOR PLASTIC 800H

POSITION RED PUSHPULL RED PUSHPULL/ RED PUSHPULL/

TWIST RELEASE TWIST RELEASE

TYPE

• UNIVERSAL LED

• 12130V AC/DC

• 1 N.O. 1 N.C.L.B. 800T-FXQH2RA1 800T-FXJEQH2RA1 800T-FXTQH2RA1 800HFRXTQH2RA1

• TRANSFORMER

• LED

• 120V AC, 50/60 HZ

800T-FXPH16RA1 800T-FXJEPH16RA1 800T-FXTPH16RA1 800H-FRXTPH16RA1

• 1 N.O. 1 N.C.L.B.

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

STANDARD KNOB KNOB LEVER CYLINDER LOCK STANDARD KNOB

CONTACT

CONFIGURATION OPERATOR TYPE

800T-H2A 800T-H17A 800T-H33A 800H-HR2A

1 N.O. 1 N.C. 800T-H4A 800T-H18A 800T-H42A 800H-HR4A

800T-H5A 800T-H19A 800T-H48A 800H-HR5A

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

STANDARD KNOB KNOB LEVER CYLINDER LOCK STANDARD KNOB

CONTACT

CONFIGURATION OPERATOR TYPE

800T-N2KF4B 800T-N17KF4B 800T-N33KF4B 800H-NR2KF4B

2 N.O. 2 N.C. 800T-N3KF4B 800T-N29KF4B 800T-N133KF4B 800H-NR3KF4B

800T-N9KF4B 800T-N30KF4B 800T-N233KF4B 800H-NR9KF4B

TYPE 4/13 TYPE 4/4X/13

METAL 800T PLASTIC 800H

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

CONTACT OPERATOR RED PUSHPULL RED PUSHPULL RED PUSHPULL/ RED PUSH PULL/

CONFIGURATION POSITION TWIST RELEASE TWIST RELEASE

S.M.C.B.

800TC-FXLE6D4S

N.C.L.B.

800T-FX6D4 800T-FXT6D4 800H-FRXT6D4

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

STANDARD TYPE PUSHTOTEST STANDARD TYPE PUSHTOTEST

TYPE COLOR

• UNIVERSAL LED 800T-QH2R 800T-QTH2R 800H-QRH2R 800H-QRTH2R

• 12130V AC/DC 800T-QH2G 800T-QTH2G 800H-QRH2G 800H-QRTH2G

800T-QH2A 800T-QTH2A 800H-QRH2A 800H-QRTH2A

• TRANSFORMER 800T-PH16R 800T-PTH16R 800H-PRH16R 800H-PRTH16R

• LED 800T-PH16G 800T-PTH16G 800H-PRH16G 800H-PRTH16G

• 120V AC, 50/60 HZ 800T-PH16A 800T-PTH16A 800H-PRH16A 800H-PRTH16A

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

STANDARD KNOB STANDARD KNOB

TYPE OPERATOR TYPE

• UNIVERSAL LED 800T-2HRH2KB6AX 800H-2HRRH2KB6AX

• 12-130V AC/DC 800T-2HRH4KL8AX 800H-2HRRH4KL8AX

• RED KNOB

800T-2HRH5KL8AX 800H-2HRRH5KL8AX• 1 N.O. - 1 N.C.

• TRANSFORMER 800T-16HRH2KB6AX 800H-16HRRH2KB6AX

• RED LED 800T-16HRH4KL8AX 800H-16HRRH4KL8AX

• 120V AC, 50/60 HZ

800T-16HRH5KL8AX 800H-16HRRH5KL8AX• 1 N.O. - 1 N.C .

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

STANDARD KNOB STANDARD KNOB

TYPE OPERATOR TYPE

• UNIVERSAL LED 800T-2JRH2KB7AX 800H-2JRRH2KB7AX

• 12-130V AC/DC 800T-2JRH4KB7AX 800H-2JRRH4KB7AX

• RED KNOB

800T-2JRH5KB7AX 800H-2JRRH5KB7AX• 1 N.O. - 1 N.C.

• TRANSFORMER 800T-16JRH2KB7AX 800H-16JRRH2KB7AX

• RED LED 800T-16JRH4KB7AX 800H-16JRRH4KB7AX

• 120V AC, 50/60 HZ

800T-16JRH5KB7AX 800H-16JRRH5KB7AX• 1 N.O. - 1 N.C.

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

EXTENDED HEAD EXTENDED HEAD EXTENDED HEAD EXTENDED HEAD

WITHOUT GUARD WITH GUARD WITHOUT GUARD WITH GUARD

TYPE COLOR

• UNIVERSAL LED 800T-QBH2R 800T-QAH2R 800H-QRBH2R 800H-QRAH2R

• 12130V AC/DC 800T-QBH2G 800T-QAH2G 800H-QRBH2G 800H-QRAH2G

• 1 N.O. 1 N.C. 800T-QBH2A 800T-QAH2A 800H-QRBH2A 800H-QRAH2A

• TRANSFORMER 800T-PBH16R 800T-PAH16R 800H-PRBH16R 800H-PRAH16R

• LED 800T-PBH16G 800T-PAH16G 800H-PRBH16G 800H-PRAH16G

• 120V AC, 50/60 HZ 800T-PBH16A 800T-PAH16A 800H-PRBH16A 800H-PRAH16A

• 1 N.O. 1 N.C.

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

FLUSH HEAD EXTENDED HEAD BOOTLESS FLUSH HEAD BOOTED

CONTACT

CONFIGURATION COLOR

1 N.O. 800T-A1D1 800T-B1D1 800H-AR1D1 800H-R1D1

800T-A2D1 800T-B2D1 800H-AR2D1 800H-R2D1

800T-A6D1 800T-B6D1 800H-AR6D1 800H-R6D1

1 N.C. 800T-A1D2 800T-B1D2 800H-AR1D2 800H-R1D2

800T-A2D2 800T-B2D2 800H-AR2D2 800H-R2D2

800T-A6D2 800T-B6D2 800H-AR6D2 800H-R6D2

1 N.O. 1 N.C. 800T-A1A 800T-B1A 800H-AR1A 800H-R1A

800T-A2A 800T-B2A 800H-AR2A 800H-R2A

800T-A6A 800T-B6A 800H-AR6A 800H-R6A

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

STANDARD KNOB KNOB LEVER CYLINDER LOCK STANDARD KNOB

CONTACT

CONFIGURATION OPERATOR TYPE

800T-J2A 800T-J17A 800T-J42A 800H-JR2A

1 N.O. 1 N.C. 800T-J4A 800T-J18A 800T-J50A 800H-JR4A

800T-J5A 800T-J19A 800T-J38A 800H-JR5A

START FLUSH 800T-A103WA 800H-AR103WA

STOP EXTENDED 800T-B604WA 800H-BR604WA

I FLUSH 800T-A101WA 800H-AR101WA

O EXTENDED 800T-B602WA 800H-BR602WA

FORWARD FLUSH 800T-A210WA 800H-AR210WA

REVERSE FLUSH 800T-A210WA 800H-AR210WA

JOG FLUSH 800T-A212WA 800H-AR212WA

UP FLUSH 800T-A213WA 800H-AR213WA

DOWN FLUSH 800T-A214WA 800H-AR214WA

R FLUSH 800T-A711WA 800H-AR711WA

PUSH BUTTON DEVICES PILOT LIGHT DEVICES SELECTOR SWITCH DEVICES

MOMENTARY CONTACT PUSH BUTTONS, NONILLUMINATED 2POSITION SELECTOR SWITCHES, NONILLUMINATED 3POSITION SELECTOR SWITCHES, NONILLUMINATED

4POSITION SELECTOR SWITCHES, NONILLUMINATED

3POSITION SELECTOR SWITCHES, ILLUMINATED

2POSITION SELECTOR SWITCHES, ILLUMINATED

MOMENTARY CONTACT PUSH BUTTONS, NONILLUMINATED WITH 2 COLOR MOLDED LEGEND CAP

MOMENTARY CONTACT PUSH BUTTONS, ILLUMINATED

2POSITION PUSHPULL AND PUSHPULL/TWIST RELEASE, NONILLUMINATED 2POSITION PUSHPULL AND PUSHPULL/TWIST RELEASE, ILLUMINATED

CONTACT

CONFIGURATION

1 N.O. 1 N.C.

1 N.O. 1 N.C.

1 N.O. 1 N.C.

Maintained Out In

O X X O

Maintained Out In X O

EMERGENCY-STOP & PUSH-PULL DEVICES

For a full product offering, please refer to the Industrial Controls catalog or contact your local Rockwell Automation sales office or Allen-Bradley distributor.

You can also visit our website at: www.ab.com/components.

TYPE 4/13 METAL 800T TYPE 4/4X/13

OPERATOR PLASTIC 800H

POSITION RED PUSHPULL RED PUSHPULL/ RED PUSHPULL/

TWIST RELEASE TWIST RELEASE

TYPE

• UNIVERSAL LED

• 12130V AC/DC

• 1 N.O. 1 N.C.L.B. 800T-FXQH2RA1 800T-FXJEQH2RA1 800T-FXTQH2RA1 800HFRXTQH2RA1

• TRANSFORMER

• LED

• 120V AC, 50/60 HZ

800T-FXPH16RA1 800T-FXJEPH16RA1 800T-FXTPH16RA1 800H-FRXTPH16RA1

• 1 N.O. 1 N.C.L.B.

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

STANDARD KNOB KNOB LEVER CYLINDER LOCK STANDARD KNOB

CONTACT

CONFIGURATION OPERATOR TYPE

800T-H2A 800T-H17A 800T-H33A 800H-HR2A

1 N.O. 1 N.C. 800T-H4A 800T-H18A 800T-H42A 800H-HR4A

800T-H5A 800T-H19A 800T-H48A 800H-HR5A

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

STANDARD KNOB KNOB LEVER CYLINDER LOCK STANDARD KNOB

CONTACT

CONFIGURATION OPERATOR TYPE

800T-N2KF4B 800T-N17KF4B 800T-N33KF4B 800H-NR2KF4B

2 N.O. 2 N.C. 800T-N3KF4B 800T-N29KF4B 800T-N133KF4B 800H-NR3KF4B

800T-N9KF4B 800T-N30KF4B 800T-N233KF4B 800H-NR9KF4B

TYPE 4/13 TYPE 4/4X/13

METAL 800T PLASTIC 800H

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

CONTACT OPERATOR RED PUSHPULL RED PUSHPULL RED PUSHPULL/ RED PUSH PULL/

CONFIGURATION POSITION TWIST RELEASE TWIST RELEASE

S.M.C.B.

800TC-FXLE6D4S

N.C.L.B.

800T-FX6D4 800T-FXT6D4 800H-FRXT6D4

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

STANDARD TYPE PUSHTOTEST STANDARD TYPE PUSHTOTEST

TYPE COLOR

• UNIVERSAL LED 800T-QH2R 800T-QTH2R 800H-QRH2R 800H-QRTH2R

• 12130V AC/DC 800T-QH2G 800T-QTH2G 800H-QRH2G 800H-QRTH2G

800T-QH2A 800T-QTH2A 800H-QRH2A 800H-QRTH2A

• TRANSFORMER 800T-PH16R 800T-PTH16R 800H-PRH16R 800H-PRTH16R

• LED 800T-PH16G 800T-PTH16G 800H-PRH16G 800H-PRTH16G

• 120V AC, 50/60 HZ 800T-PH16A 800T-PTH16A 800H-PRH16A 800H-PRTH16A

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

STANDARD KNOB STANDARD KNOB

TYPE OPERATOR TYPE

• UNIVERSAL LED 800T-2HRH2KB6AX 800H-2HRRH2KB6AX

• 12-130V AC/DC 800T-2HRH4KL8AX 800H-2HRRH4KL8AX

• RED KNOB

800T-2HRH5KL8AX 800H-2HRRH5KL8AX• 1 N.O. - 1 N.C.

• TRANSFORMER 800T-16HRH2KB6AX 800H-16HRRH2KB6AX

• RED LED 800T-16HRH4KL8AX 800H-16HRRH4KL8AX

• 120V AC, 50/60 HZ

800T-16HRH5KL8AX 800H-16HRRH5KL8AX• 1 N.O. - 1 N.C .

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

STANDARD KNOB STANDARD KNOB

TYPE OPERATOR TYPE

• UNIVERSAL LED 800T-2JRH2KB7AX 800H-2JRRH2KB7AX

• 12-130V AC/DC 800T-2JRH4KB7AX 800H-2JRRH4KB7AX

• RED KNOB

800T-2JRH5KB7AX 800H-2JRRH5KB7AX• 1 N.O. - 1 N.C.

• TRANSFORMER 800T-16JRH2KB7AX 800H-16JRRH2KB7AX

• RED LED 800T-16JRH4KB7AX 800H-16JRRH4KB7AX

• 120V AC, 50/60 HZ

800T-16JRH5KB7AX 800H-16JRRH5KB7AX• 1 N.O. - 1 N.C.

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

EXTENDED HEAD EXTENDED HEAD EXTENDED HEAD EXTENDED HEAD

WITHOUT GUARD WITH GUARD WITHOUT GUARD WITH GUARD

TYPE COLOR

• UNIVERSAL LED 800T-QBH2R 800T-QAH2R 800H-QRBH2R 800H-QRAH2R

• 12130V AC/DC 800T-QBH2G 800T-QAH2G 800H-QRBH2G 800H-QRAH2G

• 1 N.O. 1 N.C. 800T-QBH2A 800T-QAH2A 800H-QRBH2A 800H-QRAH2A

• TRANSFORMER 800T-PBH16R 800T-PAH16R 800H-PRBH16R 800H-PRAH16R

• LED 800T-PBH16G 800T-PAH16G 800H-PRBH16G 800H-PRAH16G

• 120V AC, 50/60 HZ 800T-PBH16A 800T-PAH16A 800H-PRBH16A 800H-PRAH16A

• 1 N.O. 1 N.C.

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

FLUSH HEAD EXTENDED HEAD BOOTLESS FLUSH HEAD BOOTED

CONTACT

CONFIGURATION COLOR

1 N.O. 800T-A1D1 800T-B1D1 800H-AR1D1 800H-R1D1

800T-A2D1 800T-B2D1 800H-AR2D1 800H-R2D1

800T-A6D1 800T-B6D1 800H-AR6D1 800H-R6D1

1 N.C. 800T-A1D2 800T-B1D2 800H-AR1D2 800H-R1D2

800T-A2D2 800T-B2D2 800H-AR2D2 800H-R2D2

800T-A6D2 800T-B6D2 800H-AR6D2 800H-R6D2

1 N.O. 1 N.C. 800T-A1A 800T-B1A 800H-AR1A 800H-R1A

800T-A2A 800T-B2A 800H-AR2A 800H-R2A

800T-A6A 800T-B6A 800H-AR6A 800H-R6A

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

STANDARD KNOB KNOB LEVER CYLINDER LOCK STANDARD KNOB

CONTACT

CONFIGURATION OPERATOR TYPE

800T-J2A 800T-J17A 800T-J42A 800H-JR2A

1 N.O. 1 N.C. 800T-J4A 800T-J18A 800T-J50A 800H-JR4A

800T-J5A 800T-J19A 800T-J38A 800H-JR5A

START FLUSH 800T-A103WA 800H-AR103WA

STOP EXTENDED 800T-B604WA 800H-BR604WA

I FLUSH 800T-A101WA 800H-AR101WA

O EXTENDED 800T-B602WA 800H-BR602WA

FORWARD FLUSH 800T-A210WA 800H-AR210WA

REVERSE FLUSH 800T-A210WA 800H-AR210WA

JOG FLUSH 800T-A212WA 800H-AR212WA

UP FLUSH 800T-A213WA 800H-AR213WA

DOWN FLUSH 800T-A214WA 800H-AR214WA

R FLUSH 800T-A711WA 800H-AR711WA

PUSH BUTTON DEVICES PILOT LIGHT DEVICES SELECTOR SWITCH DEVICES

MOMENTARY CONTACT PUSH BUTTONS, NONILLUMINATED 2POSITION SELECTOR SWITCHES, NONILLUMINATED 3POSITION SELECTOR SWITCHES, NONILLUMINATED

4POSITION SELECTOR SWITCHES, NONILLUMINATED

3POSITION SELECTOR SWITCHES, ILLUMINATED

2POSITION SELECTOR SWITCHES, ILLUMINATED

MOMENTARY CONTACT PUSH BUTTONS, NONILLUMINATED WITH 2 COLOR MOLDED LEGEND CAP

MOMENTARY CONTACT PUSH BUTTONS, ILLUMINATED

2POSITION PUSHPULL AND PUSHPULL/TWIST RELEASE, NONILLUMINATED 2POSITION PUSHPULL AND PUSHPULL/TWIST RELEASE, ILLUMINATED

CONTACT

CONFIGURATION

1 N.O. 1 N.C.

1 N.O. 1 N.C.

1 N.O. 1 N.C.

Maintained Out In

O X X O

Maintained Out In X O

EMERGENCY-STOP & PUSH-PULL DEVICES

For a full product offering, please refer to the Industrial Controls catalog or contact your local Rockwell Automation sales office or Allen-Bradley distributor.

You can also visit our website at: www.ab.com/components.

TYPE 4/13 METAL 800T TYPE 4/4X/13

OPERATOR PLASTIC 800H

POSITION RED PUSHPULL RED PUSHPULL/ RED PUSHPULL/

TWIST RELEASE TWIST RELEASE

TYPE

• UNIVERSAL LED

• 12130V AC/DC

• 1 N.O. 1 N.C.L.B. 800T-FXQH2RA1 800T-FXJEQH2RA1 800T-FXTQH2RA1 800HFRXTQH2RA1

• TRANSFORMER

• LED

• 120V AC, 50/60 HZ

800T-FXPH16RA1 800T-FXJEPH16RA1 800T-FXTPH16RA1 800H-FRXTPH16RA1

• 1 N.O. 1 N.C.L.B.

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

STANDARD KNOB KNOB LEVER CYLINDER LOCK STANDARD KNOB

CONTACT

CONFIGURATION OPERATOR TYPE

800T-H2A 800T-H17A 800T-H33A 800H-HR2A

1 N.O. 1 N.C. 800T-H4A 800T-H18A 800T-H42A 800H-HR4A

800T-H5A 800T-H19A 800T-H48A 800H-HR5A

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

STANDARD KNOB KNOB LEVER CYLINDER LOCK STANDARD KNOB

CONTACT

CONFIGURATION OPERATOR TYPE

800T-N2KF4B 800T-N17KF4B 800T-N33KF4B 800H-NR2KF4B

2 N.O. 2 N.C. 800T-N3KF4B 800T-N29KF4B 800T-N133KF4B 800H-NR3KF4B

800T-N9KF4B 800T-N30KF4B 800T-N233KF4B 800H-NR9KF4B

TYPE 4/13 TYPE 4/4X/13

METAL 800T PLASTIC 800H

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

CONTACT OPERATOR RED PUSHPULL RED PUSHPULL RED PUSHPULL/ RED PUSH PULL/

CONFIGURATION POSITION TWIST RELEASE TWIST RELEASE

S.M.C.B.

800TC-FXLE6D4S

N.C.L.B.

800T-FX6D4 800T-FXT6D4 800H-FRXT6D4

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

STANDARD TYPE PUSHTOTEST STANDARD TYPE PUSHTOTEST

TYPE COLOR

• UNIVERSAL LED 800T-QH2R 800T-QTH2R 800H-QRH2R 800H-QRTH2R

• 12130V AC/DC 800T-QH2G 800T-QTH2G 800H-QRH2G 800H-QRTH2G

800T-QH2A 800T-QTH2A 800H-QRH2A 800H-QRTH2A

• TRANSFORMER 800T-PH16R 800T-PTH16R 800H-PRH16R 800H-PRTH16R

• LED 800T-PH16G 800T-PTH16G 800H-PRH16G 800H-PRTH16G

• 120V AC, 50/60 HZ 800T-PH16A 800T-PTH16A 800H-PRH16A 800H-PRTH16A

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

STANDARD KNOB STANDARD KNOB

TYPE OPERATOR TYPE

• UNIVERSAL LED 800T-2HRH2KB6AX 800H-2HRRH2KB6AX

• 12-130V AC/DC 800T-2HRH4KL8AX 800H-2HRRH4KL8AX

• RED KNOB

800T-2HRH5KL8AX 800H-2HRRH5KL8AX• 1 N.O. - 1 N.C.

• TRANSFORMER 800T-16HRH2KB6AX 800H-16HRRH2KB6AX

• RED LED 800T-16HRH4KL8AX 800H-16HRRH4KL8AX

• 120V AC, 50/60 HZ

800T-16HRH5KL8AX 800H-16HRRH5KL8AX• 1 N.O. - 1 N.C .

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

STANDARD KNOB STANDARD KNOB

TYPE OPERATOR TYPE

• UNIVERSAL LED 800T-2JRH2KB7AX 800H-2JRRH2KB7AX

• 12-130V AC/DC 800T-2JRH4KB7AX 800H-2JRRH4KB7AX

• RED KNOB

800T-2JRH5KB7AX 800H-2JRRH5KB7AX• 1 N.O. - 1 N.C.

• TRANSFORMER 800T-16JRH2KB7AX 800H-16JRRH2KB7AX

• RED LED 800T-16JRH4KB7AX 800H-16JRRH4KB7AX

• 120V AC, 50/60 HZ

800T-16JRH5KB7AX 800H-16JRRH5KB7AX• 1 N.O. - 1 N.C.

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

EXTENDED HEAD EXTENDED HEAD EXTENDED HEAD EXTENDED HEAD

WITHOUT GUARD WITH GUARD WITHOUT GUARD WITH GUARD

TYPE COLOR

• UNIVERSAL LED 800T-QBH2R 800T-QAH2R 800H-QRBH2R 800H-QRAH2R

• 12130V AC/DC 800T-QBH2G 800T-QAH2G 800H-QRBH2G 800H-QRAH2G

• 1 N.O. 1 N.C. 800T-QBH2A 800T-QAH2A 800H-QRBH2A 800H-QRAH2A

• TRANSFORMER 800T-PBH16R 800T-PAH16R 800H-PRBH16R 800H-PRAH16R

• LED 800T-PBH16G 800T-PAH16G 800H-PRBH16G 800H-PRAH16G

• 120V AC, 50/60 HZ 800T-PBH16A 800T-PAH16A 800H-PRBH16A 800H-PRAH16A

• 1 N.O. 1 N.C.

TYPE 4/13 METAL 800T TYPE 4/4X/13 PLASTIC 800H

FLUSH HEAD EXTENDED HEAD BOOTLESS FLUSH HEAD BOOTED

CONTACT

CONFIGURATION COLOR

1 N.O. 800T-A1D1 800T-B1D1 800H-AR1D1 800H-R1D1

800T-A2D1 800T-B2D1 800H-AR2D1 800H-R2D1

800T-A6D1 800T-B6D1 800H-AR6D1 800H-R6D1

1 N.C. 800T-A1D2 800T-B1D2 800H-AR1D2 800H-R1D2

800T-A2D2 800T-B2D2 800H-AR2D2 800H-R2D2

800T-A6D2 800T-B6D2 800H-AR6D2 800H-R6D2

1 N.O. 1 N.C. 800T-A1A 800T-B1A 800H-AR1A 800H-R1A

800T-A2A 800T-B2A 800H-AR2A 800H-R2A

800T-A6A 800T-B6A 800H-AR6A 800H-R6A

TYPE 4/13 METAL 800T TYPE 4/4X/13

PLASTIC 800H

STANDARD KNOB KNOB LEVER CYLINDER LOCK STANDARD KNOB

CONTACT

CONFIGURATION OPERATOR TYPE

800T-J2A 800T-J17A 800T-J42A 800H-JR2A

1 N.O. 1 N.C. 800T-J4A 800T-J18A 800T-J50A 800H-JR4A

800T-J5A 800T-J19A 800T-J38A 800H-JR5A

SPECIALTY DEVICES

POTENTIOMETER UNITS

MECHANICALLY INTERLOCKED

MAINTAINED PUSH BUTTONS

CYLINDER LOCK PUSH BUTTONS (800T ONLY)

CLUSTER PILOT

LIGHTS 800T ONLY

1234 WAY TOGGLE

SWITCHES 800T ONLY

MOMENTARY

WOBBLE STICK

UNITS 800T ONLY

MOMENTARY PADLOCKING

MUSHROOM HEAD

PUSH BUTTONS 800T ONLY

SELECTOR

PUSH BUTTON

UNITS 800T ONLY

MOMENTARY CONTACT FLIP LEVER

PUSH BUTTONS 800H ONLY

Copyright © 2011 Rockwell Automation. All rights reserved. Printed in USA. Publication 800T-BR012B-EN-P – August 2011 Supersedes Publication 800T-BR012A-EN-P – January 2009

ASSEMBLED STATIONS

For a full product offering, please refer to the Industrial Controls catalog or contact your local Rockwell Automation sales office or

Allen-Bradley distributor. You can also visit our website at: www.ab.com/components.

• Designed to worldwide standards.

IMITATED, BUT NEVER DUPLICATED

FAST, EASY INSTALLATION

The Allen-Bradley Bulletin 800T and 800H push button product lines are in a class by themselves. They are designed and constructed to perform in the most demanding industrial environments. Bold yet functional, rugged yet attractive, Allen-Bradley’s 30.5 mm push buttons represent the world’s most innovative and unique offering.

WORLDWIDE SOLUTIONS SWITCHING SAFETY

Selector Switches

• Positive detent - prevents the switch from hanging up between positions

• Constant energy - minimizes accidental switching to an unwanted change in contact state

Solid-Color Button Cap - thermoplastic polyester resin delivers excellent resistance to corrosive agents/color identification is never lost (no insert to lose)

Actuator Shaft - rugged, dependable performance assured by zinc alloy casting

Return Spring - stainless steel formed wire delivers consistent operation and long life

Operator - with factory installed contact blocks

Gaskets -provide type 4/13 ingress protection

Legend plate

Mounting ring

Thrust washer -with anti-turn tab

Operator Bushing - die cast zinc alloy gives strength and stability in installation

Diaphragm Seal - provides a complete blanket of protection from liquids, particles and corrosive agents

Riveted Construction - operator bushing, diaphragm seal and base plate are secured together by four steel rivets, providing durability and tamper resistance

ADVANCED SWITCHING FUNCTIONALITY

LOGIC REED BLOCKS MINI BLOCKS MAXDUTY™ BLOCKS SNAP ACTION &

TIME DELAY BLOCKS

STACKABLE SEALED

SWITCH BLOCKS

Allen-Bradley’s wide range of contact blocks, offering features and capabilities found no where else in the industry, can address more applications and environments.

STANDARD CONTACT BLOCKS

• 10 A max., A600 rated – for general purpose use

• Flexible bifurcated spanner provides increased contact reliability

• Pure fine silver contacts resist corrosion

• Self-lifting saddle clamps simplify wiring

• Clear side plates allow easy inspection of contacts

• Optional color-coded finger safe (IP2X) versions

SEALED SWITCH CONTACT BLOCKS

• Rated for Division 2 / Zone 2 hazardous locations

• 5 A max., B600 Rated

• Hermetically sealed glass enclosed contacts provide reliable switching in highly contaminated and corrosive environments

• Contacts are constructed with tungsten, which has excellent resistance to welding

PENTUFF™ CONTACT BLOCKS

• 2.5 A max., C300 rated

• Low voltage switching reliability to 5V DC, 1 mA – ideal for interfacing with programmable logic controller input circuits

• Direct drive pentafurcated contact design

• Spanner made from corrosion resistant inert precious metals

• Optional finger-safe (IP2X) versions

SELFMONITORING™ CONTACT BLOCKS

• Ensures that the normally closed contacts will open when the E-stop is actuated

• 10 A max., A600 rated

• Bifurcated spanner with pure fine silver contacts

• Color-coded yellow for easy identification

• IP2X finger safe protection standard

TYPE 4/13 800T TYPE 4/4X/13 800H

DIE CAST ALUMINUM STAINLESS STEEL GLASS POLYESTER

BOOTED OPERATOR BOOTED OPERATOR

CONFIGURATION BUTTON LEGEND MARKING

COLOR

ONE STOP 800T-1TA 800H-1HA4T 800H-1HA4R

PUSH BUTTON START 800T-1TB 800H-1HB4T 800H-1HB4R

EMERG. STOP 800T-1TYM — —

BREAK GLASS 800T-NX114 — —

TWO START 800T-2TA 800H-2HA4T 800H-2HA4R

PUSH BUTTONS STOP

3POSITION HAND-OFF-AUTO 800T-R3TA — —

SELECTOR SWITCH

Normal Operation

Actuated Button

Improperly Installed

Note: X = Closed 0 = Open

800TC-XD4S

30.5 mm

A N N U N C I A T O R S

POWER INSTRUMENTS

Model 90A Annunciator

FOR POWER GENERATION, TRANSMISSION & DISTRIBUTION, PETROLEUM,

PETROCHEMICAL, AND OTHER PROCESS INDUSTRIES

You can select any operational sequence, sort alarms by group, confi gure your relay outputs and more. There is never any reason to pull out the front accessible input cards as chang-es can be made via software.

Reliability Every Model 90A annunciator is equipped with low power, long life LEDs. The brightness exceeds standard incandescent bulbs and they last years longer. If a LED needs replace-ment, our automatic detector provides notice so critical alarms are not missed. A built-in ground fault detector is available for indicat-ing ground faults in your fi eld wiring.

FEATURES AND BENEFITS

• Serial and Ethernet Communications:

Modbus, DNP, OPC Protocols

• Compact Size

• Timed Stamped Alarms (SER)

• Software Confi gurable

• LED Illumination (Standard)

• Laser Printed Legends

• Internal Self Diagnostics

INNOVATIVE ANNUNCIATOR

Based on the highly acclaimed Series 90, AMETEK’s new Model 90A Annunciator brings alarm monitoring to new levels.

It has several communication op-tions, can provide time stamped alarms and all features and options are fi eld confi gurable. Installation and setup have been simplifi ed making this an ideal fi t for new projects or system replacements.

The unique software confi guration provides more features and functions a mouse click away.

Communications Transmit or receive alarms using our RS-232/485 serial or Ethernet port. The Model 90A supports Modbus and DNP protocols. Communicate via OPC using our OPC Server Software.

Compact Size The annunciator and all electronics including the communication options are self contained within a compact frame less than seven inches deep. In most cases, the power supply is included inside the system simplifying installation and wiring.

Time Stamped Alarms (SER) All of your alarms can include a time stamp, syn-chronized by IRIG-B or our internal clock. This can be presented through Modbus, DNP, OPC or to a lo-cal printer or terminal for viewing.

Flexible Design The window legends are printed on standard trans-parency fi lm, making it easy to change legends at any time. The annunciator capacity can be in-creased with built-in expansion. All features and op-tions are fi eld selectable and upgradeable.

Software Confi guration While all systems are pre-confi gured to your speci-fi cations, the software confi guration tool unleashes the true power of the Model 90A.

POWER INSTRUMENTS

255 North Union Street Rochester, NY 14605 Tel: 585.263.7700 Fax: 585.454.7805 power.sales@ametek.com

HEADQUARTERS

AMETEK Power Instruments 50 Fordham Road Wilmington, MA 01887 Tel: 978.988.4903 Fax: 978.988.4990 www.ametekpower.com power.sales@ametek.com

EUROPEAN HEADQUARTERS

Unit 15, Lisburn Enterprise Centre Ballinderry Road Lisburn, Co Antrim, UK BT282BP Tel: 44.28.9260.4100 Fax: 44.28.9260.4141 sales@ametekuk.com

ASIA PACIFIC HEADQUARTERS

10 Ang Mo Kio Street 65 #05-12 Techpoint Singapore 569059 Tel: 65.6484.2388 Fax: 65.6481.6588

For customer support call:

A N N U N C I A T O R S

POWER INSTRUMENTS

ISO 9001 Certifi ed

©2007, by AMETEK, Inc. All rights reserved. .25M606A (210076)

INPUT

Field Contacts

• Normally Open (N.O.) or Normally Closed (N.C.) input selection through software or hardware

• Wetted (voltage supplied) or dry (voltage free) contacts Field Contact Voltage

• 12, 24, 48, 125 VDC, 120 VAC jumper selectable (.0018mA per input) Input Isolation

• Each input is optically isolated Input Response

• 50 milliseconds (standard)

• 1 millisecond fast response (opt)

• 50 milliseconds to 250 seconds software adjustable

DISPLAY

LED

• White LED, minimum 2 per window Window Sizes (h x w)

• Quad: 1.5 x 1.5 inch (38 x 38 mm)

• Third: 1.0 x 3.0 inch (25 x 76 mm)

• Half: 1.5 x 3.0 inch (38 x 76 mm)

• Full: 3.0 x 3.0 inch (76 x 76 mm) Window Color

• White, red, yellow, amber, green, blue Legends

• Laser printed on transparency fi lm or engraved windows

ALARM SEQUENCE

Sequence Selections

• LN, AO, AONL, AF, AFNL, FR, AM,

FRM, AS, ASFR, ASFRM, TFS,

TFSFRM, TFSM, ARR, FRR, VS,

VSRR, MC

• Software confi gurable

- Dual color sequences

- Customized fl ash rates

- Up to 4 fi rst out groups

CONTROLS

• Integral test, acknowledge, silence and reset with LED status lights

• External push button inputs

• Confi gurable switch inputs (inhibit LEDs, horns, relays)

OUTPUTS

Auxiliary Relay Option

• Individual or dual relay per point

• Follows fi eld contact or alarm sequence

• Software confi gurable

• Energized/de-energized operation

• Form A or form B (N.O. or N.C.)

• Form C (SPDT)

Common Relays

• 2 relays included for: critical and non-critical horn; ringback audible

• 2 relays available for: critical and non-critical refl ash, common alarm;

watchdog, power fail, ground fault

• Software confi gurable

• Energized or de-energized operation

• Form A or form B (N.O. or N.C.)

Relay Ratings

• 24 VDC @ 3.0 amps

• 110 VDC @ 0.1 amps

• 120 VAC @ 3.0 amps Audible

• Internal 80db @ 30cm audible device external horns available

COMMUNICATION

Serial Modbus

• Master or slave

• Transmit or receive alarms

• RS-232/485 or Ethernet

• Pushbutton controls

DNP 3.0

• Slave mode

• Transmit alarms

• RS-232/485 or Ethernet

• Pushbutton controls OPC Server Software

• Ver. 2.0 OPC DA Serial ASCII

• RS-232/485 or Ethernet

• For local terminal/printer

TIME STAMPED ALARMS

• 1 or 4…