Attachment 1 - Statement of Work - Industrial Washer.pdf
PDF 90 KB Posted
- Attached to
- 3510 - Industrial Washer & Extractor - Amendment 1 Federal contract opportunity
- Solicitation number
- FA500025Q0035
About this file
The document is a Statement of Objectives (SOO) for an industrial washer/extractor for the Department of the Air Force Pacific Air Forces at Joint Base Elmendorf-Richardson (JBER). The government requires a specific industrial washer with detailed technical specifications, including 220-240V voltage, 3-phase power, 450 lbs minimum load capacity, 590 RPM max speed, 30 different cylinder speed cycles, 40-inch door opening, 75 cu ft cylinder volume, and compatibility with existing chemical injection systems. The washer must fit within precise dimensional constraints of 96-106 inches wide and 90-114 inches deep.
The procurement includes complete removal of the existing washer using an 18,000-22,000 lb forklift, transportation via flatbed trailer, and installation of the new washer without altering the existing concrete ramp or facility infrastructure. The solicitation (FA500025Q0035) indicates funds are not currently available, and the government reserves the right to cancel the solicitation. A site visit is scheduled for 22 July 2025, quotes are due by 4:00 PM Alaska Daylight Time on 7 August 2025, and potential offerors must have REAL ID-compliant identification for base access.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Combo FA500025Q0035 Industrial Washer - Amendment 1.pdf | ||
| Attachment 6 - Provision Update.pdf | ||
| FA500025Q0035 - Questions Answers.pdf | ||
| Combo FA500025Q0035 Industrial Washer.pdf | ||
| Attachment 2 - Price Schedule_Industrial_Washer.pdf | ||
| Attachment 3a - Building 726 Layout.pptx | PPTX presentation | |
| Attachment 3b - Floor Plan.pdf | ||
| Attachment 5 - Base Access Worksheet.xlsx | XLSX spreadsheet | |
| Attachment 4 - Additional Provisions and Clauses.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 1 – Statement of Objectives
Industrial Washer
2 July 2025
1. The Government requires an industrial washer/extractor (washer) that meets the following Salient Characteristics:
a. Voltage – 220 to 240
b. Circuit Breaker – 100 to 150 AMPs
c. Hz – 50 to 60
d. Wires: 3
e. Phase: 3
f. Minimum load – 450 lbs
g. Max speed – 590 RPMs
h. Shall have at least 30 cycles with different cylinder speeds for various cycles that range from as low as 34 RPMs to at least 590 RPMs
i. Extract 320g minimum
j. Door opening of at least 40 inches
k. The cylinder volume shall be at least 75 cu ft
l. Shall have 2-rear drains: diameter of 8 inches
m. Shall have a water inlet connection of 2 inches
n. Shall have a steam hook up of 1 ¼ - 1 ½ inches
o. Width: 96 – 106 inches
p. Depth (length): 90 – 114 inches
q. Can not exceed measurement requirements
r. Must have 2-way tilt
s. Must be able to hook up to the chemical injection system already in place
2. Installation
The Government further requires that the Contractor provide all necessary supervision, labor, travel, materials, tools, equipment, accessories and other items necessary to safely complete the removal of the old washer and the installation of the new washer. This includes any necessary testing of all installed components.
2.1 Old Washer:
2.1.1 The Government requires removal of the existing washer.
- This will require forklift that lifts 18,000 – 22,000 lbs for removing old, existing washer, taking it out of the building via center loading bay, and staging it on a flatbed trailer (Government provided) in front of building 726.
- The yellow safety railing will need to be removed, but the removal must not damage or alter the concrete it is attached to.
2.2 New Washer:
2.2.1 Concrete Considerations.
- The current washer has a concrete ramp in front of the machine.
- Quoted washer must fit in the existing area without the need to remove or alter the existing concrete ramp. No alterations to the facility will be permitted.
File details come from the government source that posted it. Updated .