Scope_of_Work_5Jun19.pdf
PDF 278 KB Posted
- Attached to
- Overhead Hoists Upgrade
- Solicitation number
- FA5000-19-Q-A041
About this file
Revised Scope of Work.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Photo3.jpg | JPG image | |
| Photo1.jpg | JPG image | |
| Photo2.gif | GIF image | |
| MFR_SiteVisit.pdf | ||
| COMBO.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 2: SCOPE OF WORK
FA5000-19-Q-A041
Hoists shall have a low speed and high speed.
New hoists will need to provide at a minimum 17ft of coil chain in a chain collector. The chain will be of sufficient length as to allow the hook to touch the floor.
Hoists shall have a lift height of 15 feet.
Contractor shall complete the following:
Remove and dispose of four existing Beebe 2-ton overhead hoists.
Install four new 2-ton hoists and trolleys on existing hoist bridge and end trucks, to include utilizing current power configuration of 460V-3ph-60Hz and a 120VAC control voltage. All electrical working accordance with local, State and Federal Codes.
Hoists shall utilize the existing pendant controller (a 2-speed with maintained on/off buttons).
Perform load test and certify each hoist in accordance with Local, State and Federal codes as required and provide certificates.
Perform periodic inspections IAW new hoist owners/user’s manual.
HOIST UPGRADE SCOPE OF WORK, 5 JUNE 2019
File details come from the government source that posted it.