Salient Characteristics Dust Collector 7 July 26.pdf
PDF 107 KB Posted
- Attached to
- Dust Collector with Installation
- Solicitation number
- FA488726Q0054
About this file
This document is a Salient Characteristics statement dated 7 July 2026 for a dust collection system installation project in a wood processing facility.
The requirement calls for the provision and installation of one indoor dust collector unit with minimum 7.5 horsepower, 208V/60/3-phase power with automatic starter. The system must deliver velocities between 3500-4500 CFM and comply with NFPA 664 (2020) standards for fire and explosion prevention in wood processing facilities. The dust collector must include a manual filter shaker with a minimum 230-gallon dump bin, be anchored to the concrete floor, and feature a push-button start/stop control to activate floor sweeps independently of saw operation. All galvanized steel ducting with fittings must be installed to serve at least 10 drops with 8 active ports and 2 floor sweeps, connecting to a miter saw (2 of 4-inch and 1 of 1-3/4-inch ports), table saw (1 of 4-inch), bandsaw (2 of 4-inch), panel saw (1 of 8-inch and 1 of 1-3/4-inch), and two floor sweeps (4-inch). The installation must include a custom capture plenum at the panel saw, duct hoses at all active ports, and two 120V, 3-speed remote-controlled ambient-air filtration units with 750/950/1270 CFM capabilities. The contractor must provide all electrical outlets, components, and service for the complete system, including equipment rental vehicles, product shipping, packaging removal, and a minimum 12-month warranty for all parts and labor.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS
7 July 2026
- Provide and install one indoor Dust Collector Unit that is at least 7.5HP, 208V/60/3, with auto starter to all equipment
- Dust collection port diameter to Miter saw (2 of 4", 1 of 1-3/4") Table Saw (1 of 4") Bandsaw (2 of 4") Panel Saw (1 of 8", 1 of 1-3/4"), and Two floor sweeps (4").
- Must install push button start/stop on or near dust collector main unit to activate floor sweeps when saws are not turned on.
- Dust Collector must be able to provide velocities between 3500-4500 CFM.
- Must meet NFPA 664 (2020), Standard for the prevention of Fires and Explosions in wood processing facilities.
- Must include manual filter shaker with at least a 230-gal dump bin.
- Dust Collector must be able to be anchored to concrete floor by anchors.
- Must install all galvanized steel dust collect ducting with fittings (No existing ducting in place).
- Ducting must be able to serve at least 10 drops, with 8 active ports and 2 floor sweeps.
- Must fabricate and install 1 custom capture plenum at panel saw.
- Must install duct hoses at all active ports.
- Must provide and install 2 120V, 3-Speed Remote-Controlled (750/950/1270 CFM) ambient-air filtration units.
- Provide all electrical outlets, components, and service to power the entire Dust Collection unit and filtration systems.
- Install must include the cost of any equipment rental vehicles needed to complete the installation.
- Install must include the cost to ship the product to the installation site.
- Install must include the removal of all packaging for the new system.
- Install must include a minimum of 12 months warranty for all parts and labor.
File details come from the government source that posted it. Updated .