Salient Tool Specifications and Characteristics.pdf
PDF 451 KB Posted
- Attached to
- 55 RGS - Brand Name or Equal - Snap On Tac Packs
- Solicitation number
- FA487726QA102
About this file
This is a General Tool Specifications document that outlines detailed technical requirements for hand tools and tool storage equipment. The document specifies performance standards and material requirements across multiple tool categories including wrenches, sockets, ratchets, pliers, screwdrivers, hammers, punches, chisels, and prybars. All wrenches, sockets, ratchets, and pliers must meet or exceed ASME standards B107.100-2010 with nickel-chrome plating (zinc finish on Allen wrenches and safety wire pliers). Ratchets require sealed head design with permanent lubrication, while sockets must feature double chamfers and grooved detents. Screwdrivers must have tri-lobe handles with Snap-on® bolstered blades, tip identifiers, and soft grip handles resistant to shop solvents. Hammers require plastic faces with microcellular material and chemical-resistant urethane covering. Punches and chisels must have modified parabolic curve anvil ends and differential heat treatment. Prybars require precision-ground edges and ergonomic tapered handles extending through metal end caps.
Tool boxes must feature 14-gauge steel super-duty skid support systems, 16-gauge steel construction on all sides, four corner gussets, heavy-duty casters rated for 1700 pounds, and Lock 'N Roll® drawer systems. Each individual tool and tool case must be laser-etched with a Worldwide Identification (WWID) number supplied by the customer, with etching excluded from screwdriver shafts, calibrated measuring surfaces, impact surfaces, and safety glasses. Tool box foam specifications require a base layer of polyethylene (75-99% composition, minimum 60 lb. density, 1/8" thickness, red color) and a top layer of cross-linked polyethylene foam (4 lb. density, 1/8" to 4" thickness, black color, 3 lb/ft nominal density) water-jet cut and securely adhered with chemical-resistant adhesive. A lifetime warranty is required for all supplied tools and equipment.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| TAC Pack Questionaire.docx | DOCX document | |
| Quantity of Items Tac-pac.xlsx | XLSX spreadsheet | |
| Tac-Pac Items List (1).xlsx | XLSX spreadsheet | |
| Attachment 2 - Provisions and Clauses.pdf | ||
| Attachment 3 - COMBO.pdf | ||
| Attachment 1 - Salient Characteristics.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
GENERAL TOOL SPECIFICATIONS / CHARACTERISTICS
Wrenches, sockets, ratchets and pliers:
Meet or exceed ASME standards B107.100-2010.
Hand tools have nickel-chrome plating (Zinc finish on Allen wrenches and safety wire pliers).
Ratchets have a sealed head design, constructed to seal in permanent lubrication and seal out dust, dirt, moisture and other contaminants.
Sockets have double chamfer at both the drive and wrench openings as well as four grooved detents that allows secure attachment to the socket.
Socket extensions have knurled surface at drive end and a double chamfer design at both ends.
80 tooth design for 3/8 and 1/2-inch drive ratchets; 72 tooth for 1/4-inch drive and dual pawl mechanism for all.
Wrenches have 7.5° offset broaching.
Wrenches, sockets and nut drivers have a Flank-drive style design.
Compact durable index with individual holes for Allen Wrench Sets (metric and standard) w/ retention mechanism to prevent wrenches from falling out. The size of the applicable wrench is printed on the case.
Adjustable wrenches, pliers & side cutters have highly visible elastomer cushion grips to prevent hand slippage.
Sockets and wrench box ends have smallest outside diameter possible to provide clearance in limited access situations.
All torque wrenches are on the AFMETCAL listing of test equipment that the Government PMEL can calibrate.
Screwdrivers:
Wide tri-lobe design in the center of the handle and Snap-on® bolstered, special alloy steel blade supply turning power when needed.
Tip identifier on the crown helps to quickly identify the needed tool.
Handles have a highly visible color for quick location of tool.
Soft grip handles provide increased comfort and control with a rounded crown (not fluted) while resisting most shop solvents.
Nickel/chrome-plating helps protect against corrosion and promotes easy clean up.
Soft grip handle provides maximum turning power and greater comfort.
Precision cut and vapor-blasted tips for the best possible grip and help prevent chrome plating from peeling.
Replaceable blades, cold forged from high carbon alloy steel and heat treated for optimum strength and durability.
Hexagon bolster prevents blade from being forced into handle and provides wrench assisted turning.
Hammers:
Plastic face has ribbed, textured grip with energy absorbing microcellular to material enhance comfort and reduces vibration.
Handles have chemical resistant urethane covering and multi-position hand grip to allow user to "choke up" in tighter work areas.
All have wide flare at end of handle helps prevent slipping.
Punches and Chisels Anvil end on heads of punches and chisels are machined to a modified parabolic curve to control mushrooming and reduce chipping.
Machined and differentially heat treated for optimum performance.
The hardness of the striking head is reduced to reduce mushrooming.
Prybars:
Blades have a precision-ground edge, with angled design for maximum leverage while lifting and pulling on bar.
Manufactured from special alloy steel, precision forged and heat treated for optimum strength.
Industrial finish to help to protect against corrosion.
Have ergonomic handle with tapered design for comfortable grip.
Blades extend through the handles and contact the metal end caps to provide a continuous, solid, striking force.
Have flared end on handles to offer protection from off-center handle strikes.
Tool Boxes:
Toolboxes have 14-gauge steel super-duty skid support systems.
Toolboxes have 16-gauge steel on top, bottom, sides and back.
Toolboxes have 4 corner gussets each.
Casters are heavy duty with a weight capacity of 1700 pounds.
Standing Seams create full perimeter support to strengthen top of box.
Heavy-duty drawer slides support up to 227 lb per set.
Toolboxes have Lock 'N Roll® System to prevent drawers from drifting open when the unit is moved
Etching:
Each individual tool, and tool cases for small tools, will have laser etching of the Worldwide Identification (WWID) which will be supplied by the customer.
Markings are clear and readable and will not affect the function of the tool and will not cause corrosion problems.
Etching will not be applied to the shafts of screwdrivers, calibrated measuring surfaces, and impact surfaces.
Etching will not adversely affect the chrome plating on plated tools. Etching will not be provided on items listed as
“customer furnished” or “customer supplied tools”.
Etching on handling surfaces will not present an injury hazard to the hand.
Safety glasses and goggles will not be etched in the “viewing area”.
Tool Box Foam Specifications & Characteristics
BASE LAYER BACKER MATERIAL
Physical Characteristics:
Hard Back Polyethylene 75-99%, proprietary additives 01-25% Thickness: 1/8” Colors: RED Density: Minimum 60 lb.
CHEMICAL REISTANCE CHARACTERISTICS:
Tested in accordance with ASTM D543-2000
MACHINING CAPABILITY:
Backer material can be router cut; water jet cut or die cut and maintain the physical properties required to adequately meet varying retention requirements of different customers.
Backer material provides the capability to incorporate identification numbers in the silhouette pockets as required.
TOP LAYER FOAM PRODUCTS
PHYSICAL CHARACTERISTICS:
Cross-linked polyethylene, skinned top and bottom Thickness: 1/8”-4” (determined by what is required to hold tool securely in its cut-out location, no less than ½”) Colors: BLACK Density: 4 lb.
TECHNICAL CHARACTERISTICS: 3 lb/ft Nominal Density (PCF): 3 Tensile Strength (PSI): 70 Elongation (% to break): 150 Tear Resistance (lb/in): 17 Compression Strength (PSI) (25% deflection): 12 Compression Set (% of original thickness): 18 Thermal Stability (% of chg @ 158 degrees for 24 hrs): <.6 Working Temperature Range -70 degrees F to 175 degrees F Water Absorption (lb/ft2/degree F) : <.05 Melting Point 219degreesF-280degreesF Auto Ignition Point >60 degrees F
CHEMICAL RESISTANCE CHARACTERISTICS:
Tested in accordance with ASTM D543-2000. Resistant to all common solvents, oils, hydraulic fluids, skydrol, etc.
MACHINING CAPABILITY:
Foam will be water jet cut to maintain the physical properties required to adequately meet varying retention requirements of customer.
FOAM JOINING:
The base and top layers must be securely adhered together, with no adhesive residue in tool cut-outs.
Adhesive method must resist common chemicals.
WARRANTY SUPPORT
Requires lifetime warranty due to
File details come from the government source that posted it. Updated .