UH-1F Amend 01 SOW.rtf

STATEMENT OF WORK FOR REFURBISHMENT OF STATIC DISPLAY UH-1F HELICOPTER

Amendment 01 31 August 2009 Dean Walleen Contract Support Specialist x 2108

SOUTH DAKOTA AIR & SPACE MUSEUM, ELLSWORTH AFB, SD

OPR: MAJ Robert C. Liebman, 28 BW/CP OIC, x3803

OVERVIEW

Static Display aircraft designated for refurbishment & paint:

TYPE: Bell Helicopter UH-1F Huey

TAIL NUMBER: 65-7951

NOTES: Aircraft requires repairs to skin, panels and various accessories, plus stabilization of rotor, flight control surfaces and access panels, for long term outdoor display. Finished aircraft will display its operational markings as previously assigned to USAF Air Rescue & Recovery Squadron 37th ARRS at Ellsworth AFB.

Purpose of repairs, refurbishment and paint is to present a visually accurate representation of the aircraft in its operational state. Visually discrete (preferably invisible) cosmetic modifications may be made to enhance weather-proofing, durability, safety and/or security of the static display, as authorized by the contract officer. Otherwise, no significant structural modifications will be made to the airframe, or its components, without express written consent of the contract officer. Replacement of components does not necessarily require use of original equipment but shall result in a cosmetically accurate representation of the original part and will maintain overall structural integrity, safety and security of the aircraft, as a minimum. Original components will be used as available.

Finished display will comply with AFI 84-103, Attachment-6, para.9 criteria for aerospace vehicle display as follows:

A6.9.3. Label and identify aircraft accurately.

A6.9.4. Secure canopies, windows, doors, hatches and panels from public entry.

A6.9.5. Remove antenna wires from aircraft on outdoor display.

A6.9.6. Bird proof aircraft and missiles by screening, plugging or covering vents, nozzles, wheel wells, cowlings and cowl flap areas, intakes, airscoops and exhausts (piston or turbine engines).

A6.9.7. Secure retractable landing gear in the down position with positive locking devices.

A6.9.8. Remove or repair any evidence of internal or external corrosion or damage.

A6.9.9. Allow no water accumulation in the airframe, display mount or supporting devices.

A6.9.10. Secure control surfaces.

A6.9.11. Use tie-down devices.

A6.9.12. Park aircraft and missiles on paved surfaces or concrete pads. Use stands or tire fill to relieve stress on tires.

REPAIR & REFURBISHMENT OF AIRCRAFT

Crew entry doors, hatches, ladders & canopies will be secured with cosmetically discrete locking devices (original or attached, padlocks, typ.), maintaining capability for museum staff to re-enter the aircraft as necessary, but preventing intrusion by unauthorized personnel.

Replace broken landing gear skids to original operational configuration. Intent is for support of permanent fixture of the aircraft to concrete display pads.

Secure, replace and/or repair all antennae to represent operational configuration. EXCEPTION: Remove all long antenna wires for outdoor display.

Repair overall airframe external surface for dents & damage, secure access panels as required.

Ensure that externally visible internal/cockpit components and configuration are not damaged, altered nor obscured in performance of work.

Contractor to determine the type of restoration required for hail damage; such as, fill-in, sectionalizing, fabricating, etc., and provide different pricing options.

PREPARATION FOR PAINTING

Remove or repair any evidence of internal or external corrosion or damage.

Prevent water accumulation in the airframe, display mount and supports. Maintain existing provisions for drainage and corrosion prevention.

Prepare surfaces to be painted by removing dirt, oxidation, old paint, etc.

Contractor to provide pricing for removing parts/pieces/sections, to Contractor location for restoration/painting versus on- site restoration/painting.

PAINTING & FINISHING

Mask surfaces, areas and components not to be painted (ea. color). If the aircraft is to be camouflaged, ensure that the masked color pattern and demarcation lines (hard/soft) match a valid historical reference for the aircraft in work.

Match Federal Specification (FS) number codes for surfaces to be painted in a specific color (EXAMPLE: FS-36118 Gunship Gray) to contract officer satisfaction. If the paint as applied and dried does not match the contract officer selected/intended color, painters will remove the incorrect color and apply the correct color in its place, while minimizing collateral rework, masking, etc, for a professional finish. Masking will ensure complete coverage but maintain operability of entry access doors, hatches, ladders & canopies.

Paint applied to the static aircraft will be polyurethane or suitable paint that will combat outdoor weather conditions -- provide different pricing options for paint coatings/materials, as typically used for static aircraft preservation at various Air Force museums and airpark displays.

Apply aircraft paint and markings accurately representing the colors and markings schemes, safety and maintenance stenciling as shown in ATTACHMENT-1 to this SOW. Markings materials applied shall be selected and applied for technical accuracy, durability of color and adhesion.

Aircraft components removed, covered or altered to enable painting will be restored to their place in a secure, historically accurate configuration.

Contractor to provide pricing options for under the wing and belly restoration of aluminum: paint silver or polish (keeping in mind the labor intensive activities to keep the aluminum polished after project completion).

ADDITIONAL GUIDANCE:

Comply with all DOD and Air Force environmental and safety directives & constraints in application and results of the aircraft refurbishment, repair & finish.

Aircraft in work will be secured against unauthorized entry and pilferage of components when work is not in progress (lunch breaks, overnight, etc).

Restoration/painting priorities for the C54, C47, UH-1F, and U-8 are determined upon project initiation.

Contractor will provide interior cleaning – pricing as an option.

Contractor will remove skin fabric and replace with sheet metal as applicable.

Contractor to provide pricing options to foam fill tires.

STATEMENT OF WORK FOR REFURBISHMENT OF STATIC DISPLAY UH-1F HELICOPTER

SOUTH DAKOTA AIR & SPACE MUSEUM, ELLSWORTH AFB, SD

ATTACHMENT-1 (Six items, ref. images attached) ITEM-A: USAF Technical Order 1-1-4 extract (UH-1 paint scheme color specifications) ITEM-B: USAF Technical Order 1-1-4 extract (UH-1 overall paint scheme specification diagram) ITEM-C: USAF Technical Order 1-1-4 extract (UH-1 helicopter tail boom markings) ITEM-D: 37th ARRS Paint Scheme for UH-1 (Italeri Model Co., kit instructions, extract) ITEM-E: UH-1F 65-7951, markings shown as-is, c.2009 (www.Airliners.net).

ITEM-F: UH-1F display at FE Warren AFB, example of similar markings and display/mount configuration.